burner weishaupt used for sale

Complete line for production wooden brushes including: - Machine for cutting and edging filaments is from Marcyn (J. Evans&Sons). It has hot stam logo engraver built in and it is fully refurbished and 100% functional. It can be used for various filament cutting and edging. Also clips could be setup for different sizes of the handles. - Machine for tufting and drilling is from Schlesinger. Machine is produced in the plant in Schönheide in 1969, however before 1955, Schlesinger(nowadays Roth) manufactured machines in Schönheide (an area of eastern Germany). Our machine was made after Friedrich Schlesinger (the owner) moved to West Germany (Burgwald), a group of people continued to produce machines in the factory in East Germany. This machine is fully refurbished and 100% functional. We added computer controlled system with unique own software. It can be used for tufting wooden ...

4 deck ovens W&P, type: Matador MD 125 S52 -in bakery condition or refurbished- - 5 floors - Gas or oil burner - currently still in bakery condition - the furnace has been cleaned and technically tested - Baking area: 12m² - Stove dimension: 1.2 x 2.0m After the overhaul: - New stove tops - New glass wool - New cables - Everything renewed, checked and cleaned - 6 months warranty - Including transport and assembly in the bakery on site - After-sale service on request - Price per piece: EUR 28,900

Hall heating with oil burner

Inv. Num. : 7188 Type: MA 1900 Producer: Motoman Created: 2011 Parameters: Maximum load capacity: 3 kg Robot travel: 1200 mm Welding process: MIG/MAG Equipment: Two WG-1500 positioners Lorch Welding Accessories JetStream Burner Cleaner SICK Safety Scanner Automatic internal screen Optical Safety Barrier Telescopic entrance door Mobile top hood

Rotary Oven Baking Cabinet Miwe Rollin - for 60x80cm and 58x78cm trays - with exhaust hood - with gas burner - Nominal consumption 2.6 kW - Nominal heat load 85 kW - 3N-PE-AC 400V 50Hz - with drive-on ramp - Built in 1998 - External dimensions approx. 153x160cm and 282cm high

-rack oven Winkler Compact -for 58x78cm trays -with gas burner -with drive-on ramp -Door hinge on the right -analogue manual control -Electrical connected load: 3kW

Rotary Oven Baking Cabinet Miwe Rollin -for 60x80cm and 58x78cm trays -with exhaust hood -with gas burner -Nominal consumption 2.6 kW -Nominal heat load 85 kW -3N-PE-AC 400V 50Hz -with drive-on ramp -Year of construction 2001 -External dimensions approx. 153x160cm and 282cm high

-rack oven Winkler Compact -for 58x78cm trays -with gas burner -with drive-on ramp -Door hinge on the right -analogue manual control -Electrical connected load: 3kW -Year of construction: Ü08/ 2007

rack oven Wachtel Compact 1.8 Revolution from 2015 with gas burner and 2 rack trolleys with 18 shelves each for 58x78cm baking trays. The stove is completely assembled and immediately available in the warehouse in Bielefeld. Trade-in and delivery available, more pictures and details on request. -Year of construction 2015 -with gas burner -Door hinge on the left -with exhaust hood including fan -with digital control -for 60x80 or 58x78cm trays

-Thermal oil boiler -Manufacturer: HTT / Heuft (overhauled in 2000) -with gas burner -Type: WTO100D -Year of construction: 1992 -Heating capacity: 125 kW -Ab. Operating overpressure: 8 bar -Ab. Operating temperature: 300 C -Capacity: 53 liters -Operating voltage: 400 volts -Connected load: 4.6 kW -Rated current: 8.5 A -overhauled by Heuft in 2000

Aluminum Casthouse for sale:, Tilting rotary drum oven MASTERmax-: 3TB9, Capacity: 9 to 19 tons., Burner power: 3 MW, Electrical connection load: 88 kW, Typical power consumption: 400 - 450 kWh/t. for mixed scrap, Throughput: up to 70 t. Scrap/day/3 shifts, Complete with 2.0t linear charging machine. load, automatic natural gas/oxygen burner, weighing system and SIEMENS SIMATIC S7 PLC control., 2 pieces – spout distribution channel from the rotary drum oven to the holding ovens, Striko Westofen holding oven HR-T 10,000 500, Capacity: 10 tons, Burner: 3 gas/air burners with a total of 1.3 MW Melting capacity: 500 kg/h, Electrical connection load: 23 KW, Complete casting furnace for alloying and casting with ramp for charging ingots and alloying elements, automatic bath temperature control, flushing blocks with nitrogen/argon flow control, hydraulic manual tilt and SIEMENS SIMATIC S7 PLC ...

Grain dryer made of ALU two-column MDB-T 2/9, indirect air heater 2500 KW, heating oil, 2 circulating air fan, exhaust air, dedusted, Weishaupt, trapezoidal cladding Tel. 01715213204

1 used high-speed steam generator -------------------------------------------------- Manufacturer : CERTUSS Type : Junior 200 Capacity : 200 kg/h Heat output max : 145 kW Operating overpressure : 10 bar Water content approx. : 21,1 l Year of construction : 2011 CE mark : 0035 equipped with Certuss gas burner, gas control system, Control cabinet, mounted on the boiler body, feed water pump and the existing coarse and fine fittings.

Gebr. Boiler ---------------------------------- Make : BABCOCK OMNICAL Type : Omnimat 33 HDA Power max approx. : 3,200 kg/h Heat output : 2.08 MW Operating overpressure : 10.0 bar Steam temp. max. approx. : 184°C Water content up to NW approx. : 4.692 l Year of construction : 2002 equipped with Elco gas burner EK 5.280, gas control system, Control Cabinet, Feed Water Pump, Eco and the existing coarse and fine fittings.

Exhaust air purification system Manufacturer: Langbein Engelbracht Type: DV2-92 Plant number: No.20245 Year of construction:2004 Exhaust air volume: min. 1000 - max. 3500 Nm³/h Pressure drop: 60 mbar Burner: Gas Burner Inlet temperature: 20°C Power: Heat exchanger 600 kW Heating capacity: 230 kW Reaction temperature: 820 - 950°C Included: documentation, chimney, PC for control with software, EURO-FID, piping (if desired), control cabinet Location: Neu-Ulm

Inv. Num. : 6019 Type: EVDR 330 Producer: Elektrovýroba a montáže s.r.o. Created: 2008 Parameters: Control system: Ripast 401 (Wrykrys) Work table length: 6000 mm Work table width: 2000 mm Number of heads with gas burners: 3 pieces Maximum sheet thickness when cutting: 300 mm Spindle power: 750 W Machine height: 2000 mm Machine length: 7600 mm Machine width: 3700 mm

Inv. Num. : 7264 Type: MA2010 Producer: Yaskawa Created: 2019 Parameters: Maximum arm reach: 2010 mm Maximum load capacity: 10 kg Control voltage: 3 x 400V AC 50 Hz Network Type: TNC-S Components: Controller DX200 Master Welding source Lorch S8 RoboMig XT Burner cleaner BRG2000D 2x Positioner DK-2500-R1000 Servo Rails FB500

Table width 6000 mm Table length 14000 mm Burner heads 3 Control VISION PC Total power requirement 30 kW Space requirement approx. 24 x 9 x 3.5 m Plasma cutting capacity: 1 - 25mm Oxyfuel cutting capacity: up to 100mm Modernization of the machine in 2013 1 x refit with new B3 plasma trolleys 1 x Kjellberg HiFcous 161i 2 x PerCut 210 quick-release head Submission deadline by arrangement

Overview This microbrewery had to cease operations in recently. The original plan was to continue operations, but as this did not happen for various reasons, the entire equipment is now being sold as a whole. Equipment Steam generator with gasoil burner and its tank. Three-phase mill for grain grinding. 800-liter brewhouse with steam jacket consisting of boiler, filter tank, lung, liquor tank, tubular cooler, accumulated osmotized water tank, and 3 necessary pumps for its operation. Industrial osmosis and descaling equipment. 4 atmospheric cylindrical-conical fermenters with refrigeration jacket and a capacity of 1000 liters. 3 atmospheric cylindrical-conical fermenters with refrigeration jacket and a capacity of 1300 liters. 1 cooling system for fermenters with temperature control panel by PLC. 1 cleaning pump. 1 transfer pump. Several hoses necessary for transfers and packaging. 1 atmo ...

Giesen W6A coffee roaster Manufactured in 2016 6 Kg per batch Beautiful condition (New burner) Monophasic electricity 230V / 50Hz Propan gas (Can be changed) Sold with a 6 months warranty Shipping possible worldwide W1A available for sale from the same location Find our other announcements by clicking on the machine list in our dealer profile

One of kind coffee roaster manufactured by Typhoon in 2021 This roaster is unique because it can do both drum type of roasting and fluid-bed type of roasting with the possibility to chose one of the two methods or a mix of both. The fluid-bed roasting allows very quick cycles of about 7-10 minutes and this is resulting in an drastically improved productivity compared to a classic drum roaster. The fact that the roaster can run in automatic mode and reproduce the recipes on its own is also increasing the productivity and roasting 50kg per hour is totally achievable. Logging of bean temperature, environmental temperature and burner level and temperature are possible on the software Artisan. The cyclone is included in the machine body. This machine has been used only one year and has roasted about 25 tons of coffee, the condition is excellent. It is powered only with elect ...

The heating system includes: - Boiler Buderus Logano GE515- gas boiler 350-400 KW - Gas burner Weishaupot WG40N/1-A ZM-LN, probably built in 2010. - Diaphragm pressure expansion vessel 800 liters, manufacturer Reflex. - Storage water heater 390 litres, Buderus. - Complete control

CNC Gantry Plasma Cutting Machine Manufacturer: Messer Type: Omnimat L5600 Year of construction: 2009 CNC Control: Global Control Plus Track width: 5,600 mm Raceway length: 21 m on HEB beams Equipment: 1 x Skew Rotator Delta with plasma torch Power source Kjellberg HiFocus 360i Skew Rotator DELTA - is based on one of the most successful Plasma chamfering units worldwide - Compact design for maximum Effective working width - C-axis rotation +/- 450° - Bevel cuts from -45° to +45° 4 oxy-fuel burner trolleys 3 equipped with ALFA burners Extraction table Beuting Dimensions: 4,200 x 18,200 mm Donaldson Torit filtration system

Continuous tempering furnace plant, make Aichelin consisting of: - material charge (belt) - hardening furnace (HTO) - quenching bath - washing machine - tempering furnace (NTO) with link chain belt required space: W=4,5 m, H= 4,0 m, L=31 m line length heated length: 6500mm conveyor belt width: 1000 mm electrical connection value: 160 kVA total heating capacity: 500 kW over 40 Noxmat Recu-burner throughput: max. 650 kg/h protective gas: methanol

Walking beam-forging furnace, make Ruppmann max. temperature: 1.250°C useable dimensions (l x w x h): 3.400 x 1350 x 120 mm throughput: 1 ton/h heating: natural gas Heating thru 4 hot air radiant ceiling Bloom burners, with flame monitoring by Kromschröder burners. Temperature measurement by thermocouples, as well as automatic and stepless temperature control. Heat exchanger, combustion air fan.

table length: 6000 mm table width: 4300 mm burner heads: 1 Control: Omnicom 160iLB table height: 700 mm work speed: max. 20.000 mm/min positioning accuracy: 60.000 mm/min weight of the machine ca.: ca. 8 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU254S226 LocationBarneveld MakeHauck (USA) TypePBG 1000E-EE-VA-A air heater Year of constructionUnknown Main Features MaterialMild steel Specified Features - Miscellaneous MaterialMild steel Information Floor space4,3x2,2 M Total height2,1 M Weight2100 Kg Extra SpecificationsGas burner Hauck (USA), type: PBG 1000E-EE-VA-A, capacity 230 kW, type of gas: natural gas: With fan, brand: Karl Klein type: EMV 330/S (110 deg C), 110 m3/h: With 4x air blowers: 0.25 kW 230/400 Volt and with air heater: Leister LE 10000 HT 15kW + spare air blower. With board cabinet (as is). MiscellaneousHauck (USA)Miscellaneous > MiscellaneousBrand > Hauck (USA) What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Pl ...

General SKU230T250 LocationBarneveld MakeInodes Energie & Milieu (NL) TypeTDLIG 92-4-522 No.53/1324 Year of construction2000 Specified Features - Belt dryer MaterialStainless steel Information With switchgearcheck(as is) Total height2700 mm Weight7000 Kg CEcheck Floorspace9000x1600 mm Extra SpecificationsMax. temperature: 200°C Fuel: Natural gas Net fuel capacity 128 kW Fuel pressure 100 mbar Compressed air Belt dryersBrand > Inodes What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

KT7CNC Silver KRP 150-300 plasma cutting machine with water table Date of purchase: 2020 - used for a few months Integrated control module, fully galvanized and compact design. • Working area 150 x 300 cm • idle speed up to 25000 mm/min • Z axis working range = 110 to 270 mm • table load capacity 4000.00 kg • CAM software, proprietary, in Polish • grinded strips and gears • ergonomic control panel adjustable in two planes, monitor screen covered with tempered glass • TSC – a unique double homing system, additionally protecting the burner against accidental damage • Stop &Go – a system that allows you to simulate the smoking process, easy start, manual smoking • QS – quick start of the machine, ready in less than 1 minute. • ball conveyors facilitating material application • openings allowing easy transport of the machine using forklifts � ...

A used rack oven Wachtel Compact 1.8 KHV Stir from 2013 with gas burner is for sale and immediately available in our warehouse in Bielefeld. The stove is fully assembled in our warehouse. Rack Oven Rotary Oven Wachtel Compact 1.8 KHV Stir - Year of construction 2013 - with gas burner - Door hinge on the right - with exhaust hood including fan - with digital control - for 60x80 or 58x78cm trays - Operating voltage: 400 volts -Control voltage. 230 volts - Frequency: 50 Hz - Power 2.5 kW -20 pieces in stock -External dimensions approx.: 158x170x280cm WxDxH Trade-in and delivery possible, further pictures and information on request

The object of sale is a CNC plasma plotter with a working area of 150x300x15cm. The machine has a built-in stable and independent Starfire2100c controller with a built-in THC sensor and a collisionless torch system based on an inductive sensor. It has a built-in shape generator (brands, washers, flanges) and the ability to upload files prepared on a computer via USB. external dimension: 375x230x145cm. working area dimension: 150x300x15cm. (depth of the table after removing the saber 60cm). control: independent Starfire 2100c controller with USB port THC sensor-built in with regulation inductive tap sensors collision-free burner system with inductive sensor table: stencil table with tin floor + extraction fan Hiwin HGR20 linear slides with CENTRAL LUBRIFICATION system drives: stepper motors 8,5Nm + HELICAL gear strips 25x20mm. equipment: dispenser(remote control), extractio ...

Used deck oven W&P Matador MK 50 with proofing chamber - Stove width 1.20 x 2m - with oil burner - Baking area: 9.6 m² - incl. fermentation chamber - On-site application necessary Viewing and test run are possible by arrangement.

: neu : 2024 : 2517 : Juni 2024, Zwischenverkau : Deutschland : 36950 € : 750.09 € : 1500x3000 mm : Hypertherm Powermax 105 S : 22 mm : 22 mm : 50 mm : 19 mm : 105 A : 105 A : 24 m/min : 1/10 mm : 400 kg/m² : 3560 mm : 1960 mm : 1500 mm : 650 kg compressed air powered plasma sourceHYPERTHERM Powermax 105 Sync CNC-workbench software (external PC not included) adjustable rollers precision profile rail guide(HiWin) zero backlash HTD drive belt driven by step motors solid frame construction seperate renewable support grate water trough to catch flying sparks swimming burner bearing in combination with exchangeable slide screws, enables constant cutting height hand operation unit for comfortable processing and set up on the workpiece users manual in GERMAN according to CE rules INCL. FOLLOWING OPTIONS: Height adjustment by arc voltage Set-up laser Suction bridge (prepared for suction dia ...

Capacity: up to 30kg of green coffee per roast (120kg per hour) Roasting time: 12-15 minutes Voltage: 400V, 3 phase, 60Hz (other voltages by request) Gas: natural gas/LPG Burner: Probat – direct, modulated New chaff cyclone with a wheeled bin for easy chaff disposal is included with the roaster. New pneumatic green coffee loader included. New destoner optional. The roaster will undergo a major refurbishing, the process will include: - inspection, sandblasting, cleaning and repairing all of the parts, - installing new insulation, - installing new bearings, - installing a new / repairing the drum cover, - installing new direct drive motors with speed control on the drum and exhaust fan, - making a new electric cabinet and controls ( PLC and touchscreen with connection to Artisan of Cropster), - installing new cooling bin sheathing, - rebuilding the burn ...

- Platform scale for the weight of raw coffee; - Pneumatic loader for raw coffee, with collection tank for 60 kg green coffee; - Vittoria semi-automatic roaster; roasting capacity per cycle: 60 kg. Cycle duration between 15/17 minutes. Electric panel, toasting cycle control with automatic unloading. Probes for temperature detection and the possibility to set and adjust the roasting curves; - Opening toaster by compressed air control as well as emergency opening always controlled automatically for operator safety; - Roasting drum internally connected to a water outlet, for fire safety, which can be operated automatically or manually; - Methane burner; - Film maker with continuous film expulsion system; - Baltur smoke burner; - Cooling tank with safety grid protection and suction circuit; - Electro-pneumatic stone remover with silos, complete with suction fan; - Stone removal sil ...

We are selling our 1958 Probat G45. This machine is always been serviced by Schuilenburg (Probat dealer in Belgium) also updated in the early nineties. Machine is still operational. Probes are fitted on the machine and connected to Cropster at the moment. Gas regulation is upgraded to Krom Schroder, fully automatic ignition. Possibility to reconnect the water spraying in the machine as well (to reduce the lost of weight) I disconected it. There is a Probat smoke burner as well, but the engine(Weishaupt) needs replacement.

Lilla Coffee Roaster, made in Brazil. Sup-ecologically-friendly, it recycles the hot air from the drum back into the furnace” which acts as it’s own after-burner and wastes no heat. This cuts down on the amount of gas used. From 2005 until 2019, it has roasted most of our coffee. We have been working on a refurbishment program to bring it back to perfect working order. This is now complete and the roaster is ready for another 15 years…perhaps – a video which we made during final testing phase is available on request.

Suprarex 3500 (width 3500mm) with plasma M3 of the second generation (G2) and with WIC (water clearance for the possibility of cutting under water). The machine was bought mainly for cutting stainless steel. Of course, it can also cut carbon steel or aluminum (it can only be cut separately). Basic consumable parts for the burner are also included. The machine was practically never used and cut for a total of 1 hour (started up and tested).

The VANAD Bluester 30/40 cutting machine is in good technical condition. Upon agreement possible to see. Accessories: Sectionally sucked material table 2.6 x 4.12 m Kemper for autogenous sheet metal cutting up to a thickness of 200 mm, permissible load 1500 kg / m2 Kemper filtration unit - outdoor design, recuperation, touch screen control Air ducts Compressor unit Orlík Sheet format: 2500x4000 mm Max. metal sheet thickness: 200 mm Autogenous burner:: Knife 932 Micro-impact marking unit:: Bluester IHT unit - : height regulation

current capacity: - kVA number of controlled axis: - workpiece weight: - kg Welding robot with 2 turning tables Category: Robots/Automation 2 tables, each 1800 x 550 mm 6-axis robot + turning table and travel path Burner cleaning Binzel Power source Fronius Transpuls Synergic 4000 including water cooling Not operational (in need of repair, spare parts carrier or for Restore - servo axis 7+8 report errors) Sale ex site (without dismantling) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Very beautiful JOPER coffee roaster with roasting profiler Year of manufacture: 2013 Condition: Very good (Was used only for micro lots) Hand crafted in portugal Usefull capacity per batch: 5kg Minimum batch size: 2.5kg Front and back lid made of cast iron Roasting and cooling at the same time 4 motors for the drum, the cooling tray arm, the cooling fan and the drum airflow Double wall drum Very well insulated roaster for increased quietness and energy efficiency Profile roasting system controlled by PLC, touch screen or computer. You can save roasting profiles and reproduce them later automatically. 2 thermocouples for bean and air temperature Artisan & Cropster connection Chaff collector included Adjustable Low Nox atmospheric LPG gas burner Power: 220V/50Hz Dimensions:2075 x 1160 x 2090H Weight: 450Kg Possibility to buy a destoner separately for 2000 ...

Inv. Num. : 6144 Type: Scorpion 2000 Producer: Pierce Created: 2004 Parameters: Work table length: 3000 mm Work table width: 1500 mm Minimum sheet thickness: 2 mm Maximum sheet thickness when cutting: 15 mm Equipment: Source: Hypertherm 1650 Vacuum New Burner PC board replacement. According to GO.

TIG and Electric Inverter Welding Machine ESS Type 170 ATG (AC-DC) TIG Welding Machine Fabr. No. 0907036 Year of manufacture 2007 Power TIG 170 Amp. = 35% ED 130 Amp. = 60% ED 110 Amp. = 100% ED Power Electrode 140 Amp. = 35%ED Mains connection 230 Volt, 50 Hz. • DC and AC welding • HF ignition • Infinitely variable power adjustment • 2-stroke and 4-stroke welding operation • Pulse welding mode• Rod electrode operating mode• 8 meter hose package with TIG burner• Inert gas pressure reducer • Fan cooling • Portable Space requirement Welding machine L x W x H 400 x 270 x 500 mm Weight 26 kg very good condition; used

Inv. Num. : 6599 Type: MG 12001 25PrP Producer: Microstep Created: 2007 Parameters: Plasma source: 2x Fine Focus 800 (300 A) Portal width: 2500 mm Equipment: 3 burners Cable Automatic controller Cooling unit Incidentals

Key data: 5 A, 80 V, 400 V

- EWM tigSpeed continuous drive 45 coldwire wire feeder - Power 350 amps at 60% - Electronic RF ignition - TIG liftarc welding without HF - Adjustable AC current shape - Sine, trapezoidal & square wave current - Adjustable AC frequency 30 Hz to 300 Hz - Adjustable AC balance - 2-stroke/4-stroke operation - Reduced secondary current that can be called up via burner button - Spot welding/stitching function (spotArc / spotmatic) - Adjustable upslope and downslope time - Adjustable gas pre- and gas-afterflow time - MMA welding - MMA average pulses - Adjustable hotstart current and hotstart time - Adjustable Arcforce - Anti-stick function - Energy-saving due to high efficiency and standby function -water-cooled Specification - Welding current adjustment range: 5 A - 350 A - Duty cycle at ambient temperature: 40 °C / 25 °C - 100%: 350 A - Open circuit voltage: 80 V  ...

4 burner hob with oven Manufacturer: Malag Type: 7-401 Device Type: Floor-Standing Burners: 4 burners Power Type: Electric Oven energy type: Electric Nominal voltage: 380 V Nominal consumption: 10.7 kW Stove tops adjustable in 3 steps Electric oven adjustable from 50° to 300°C Body made of high-quality stainless steel In one piece die-cut hermetic hob More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

7 meter powder furnace with partition wall at 4+3 meter 5 rails integrated With gas burner

Powder furnace hybrid, electric or heated with gas burner Tray trolley for loading +/- 3°C accurate, very homogeneous air distribution References all over the DACH region, since 2010

Powder furnace hybrid, electric or heated with gas burner Tray trolley for loading +/- 3°C accurate, very homogeneous air distribution References all over the DACH region, since 2010

Description: Working width approx. 1400 mm, with feed roller conveyor, 4 burners, atomizer unit with double spray head on linear axis, removal roller conveyor length approx. 3000 mm Approx. Onsite Dimension. (l x w x h): 10,000 x 3,500 x 3,500 mm, weight approx.: 3,500 kg