build used for sale

Pressure build-up and bleed valve, pilot-operated FESTO MFHE-3-1/2 10421 2 - 10 bar Connections: G1/2 ( inch ) without solenoid coil New ! Dimensions ( valve ): 90 x 86 x 132 mm

Pressure build-up and bleed valve, pilot-operated FESTO MFHE-3-1/4-B 14329 2 - 10 bar Connections: G1/4 ( inch ) without solenoid coil New ! Dimensions ( valve ): 73 x 71 x 115 mm

Pressure build-up and vent valve FESTO MS6-SV-1/2-E-10V24-SO-AG 548717 Operating pressure: 3.5 - 10 bar connections: 2x G1/2 ( inch ), 1x G1 ( inch ) rated operating voltage: 24 V DC IP65 New ! Dimensions: 375 x 65 x 105 mm

extinguishing water tank, storage tank, earth tank, irrigation tank, sports field irrigation, cistern, rain collection container with 100,000 litres capacity for the storage of service water / extinguishing water. Dimensions: D = 2.90 m - L = approx. 16.00 m The container has a manhole DN 600 with dome lid, is used, emptied inside and professionally cleaned and is provided with a bitumen coating / bitumen insulation on the outside. Slight insulating damage due to removal and transport may be present on the container. Price from Söhrewald - freely charged - For use as a fire-fighting water tank, we can use the tank fully equipped with a fire brigade suction connection, consisting of: - 1 dome shaft made of glass-fibre reinforced plastic - GRP, complete with walk-in Steel plate cover - diameter = approx. 1.00 m, height = approx. 0.85m, - 1 pc. suction l ...

TECHNICAL SPECIFICATIONS Manufacturer: M-Tec CZ s.r.o. Description: Building material silo Type: KET 6/0.1 Year of construction: 1997 Content: 6.000 l Maximum speed. Operating overpressure: 0.1 bar Maximum speed. Operating temperature: 60°C SPECIFIC COMMENT - Good technical condition, little wear - Versatile - A total of 11 pieces available, individual sale possible TECHNICAL SPECIFICATION Manufacturer: M-Tec Description: Building material silos Type KET 6/0.1 Year of construction: 1997 Volume: 6.000 l permitted working overpressure: 0.1 bar permitted working temperature: 60°C SPECIFIC COMMENT - Good technical condition, low wear - Versatile use - In total 11 pieces available, single sale possible

Working diameter: 1600 mm 4 electric clamping

- n.10 iron elements including gratings, gratings and more for scrap; elements for air conditioning system; n.1 low steel cabinet with doors Sliding; n.3 pallets of gypsum tiles 500x750 mm; n.10 ad polystyrene arch for concrete castings; n.10 pallets of various bricks including piñatas for floors, tiles, bricks, poroton type blocks of various measurements, type and Marseille tiles; n.3 pallets of tiles for internal/external mm 150x150; n.3 pallets of curbs, both straight and curved for sidewalks; n.1 igloo pallet for ventilated floor; n.4 pallets of self-locking grey concrete of various shapes and thicknesses; n.2 pallets of grey concrete blocks of various thicknesses; n.1 pallet of Cement roof tiles of various colours double Roman type - DEPOSITED IN OVANENGO (BS) - n.5 pallets of self-locking of various shapes and sizes; n. 3 baskets of Horizontal and vertical r ...

Akar Makina Truck Builder Machine Model AKR172 Year 2021 Total power: 4.5 Kw Working pressure: 8 bar (120psi) Manual and automatic use TECHNICAL FEATURES PLC controlled precured tread builder for tyres 700 mm (27.5") -1450mm (57") with expandable hub and rim system User friendly easy operation Tyre range: 7.50 R 15 - 12.00 R 24 Expandable rim: 20-22.5x9" included (Other sizes are optional) Three-zone pneumatic pressure application feature Two-mode tire rotation with pedal control Adjustable speed control tread application on tires Controllable stitching and building operation with tread stretching Three-line optical laser centering system CE Certified

All-terrain crane Poclain PPM 1815 Refurbished 2020 UVV valid until 08/2022 New tyres Cabin heating new Complete electrical system of the crane overhauled or renewed New driving clutch

Central assembly SIEMENS 1P 6ES7 314-1AE01-0AB0 ( 1P6ES7314-1AE01-0AB0 ) SIMATIC S7 CPU314 24V DC 0.7A used, tested ! Dimensions: 125 x 120 x 80 mm

Screw Compressor, Air Compressor, Air Compressor, Trailer Compressor -Manufacturer: Atlas Copco, mobile compressor type XAS 55 -Volume flow: max. 3.1m³/min -Pressure: 7 bars -Engine: Deutz F3L 1011 F 30 kW -Drawbar: adjustable in height -Dimensions: 1330/2230/H1800 mm (drawbar folded up) -Weight: 814 kg

Heat exchangers, building heating, building dryers, heating, hall heating, hot water exchangers -Can be used in conjunction with Wacker Neuson HP 252 as hall heating/building heating, not included -Type: HX 60 -Power: 43.5 kW -Number: 8 pieces available -Price: per piece -Dimensions: 660/720/H1065 mm -Weight: 106 kg

Make: Kobelco Model: SK2200D Serial number: YZ05-04003 Height Reach: 42 metres Capacity: 200 tons Working hours: Only 35,617 Condition: Very good. Contact us at infoheeyas.co.uk #kobelc0 #crane #demolition #construction #heavyequipment #loading #japan #cranes #buildingcrane

ID3159 Potain MD120 A year/Year of construction 1996 55 m boom, hook height 35 m, foot ZD40 A, with radio control 55 m boom, hook height 35 m, base ZD40 A, with radio control

Description: BUILDING PORTION FOR GARAGE USE BUILDING PORTION FOR STORAGE USE BUILDING PORTION FOR PRIVATE OFFICE USE PORTION OF LAND DESIGNATED AS A GARDEN (FALLING WHOLLY OR PARTLY WITHIN THE ROAD RESERVE ZONE) Property for sale on LINK Documentation : GD Sales Authorization Sales Notice Urban Planning Destination Certificate Appraisal Floor Plans Virtual Tour Ground Floor & Garage Virtual Tour Offices & Terrace Description: The units for sale are part of a building constructed in 1972 and completed restructured and expanded in 2003 (with work finishing in 2011). The units that make up the building are distributed across two common staircases, one enclosed and one open. There are no elevators. The building has a common garden and an outdoor area on Viale Industria, currently used as a parking lot. The building has a second pedestrian access from Via Amerigo Vespucci, loc ...

Collman Building Machine Ref: RB003 For tyres up to 2.5m and 1m wide With hydraulic cutting unit Can use for smooth and groove Buffing arm can be supplied but will need to be rebuilt with spare motor before being able to use as a Buffer Fully operational Peel, Buff (with arm), Build, Cut Hydraulic motor you can use to cut through cured tyres (very strong arm) Modern Panel

Collman Buffing / Building / Peeling Machine Ref: RB007 Year 1980’s 50 volts 50 cycles 20kw Manual peeling, buffing, building Good for PCR truck and Light OTR tyres Latest standards

Collman Building Machine Ref: RB008 Quick building due to double rollers Manual With full rack of plates

Lawn building machine Sembdner RS 60 R, working width 60 cm, drive F&S 2-stroke petrol engine. Reversing gearbox for forward and reverse travel. Equipment: smooth roller with scrapers at the front, hedgehog with cleaning cage in the middle, smooth roller with scrapers (water-fillable) at the rear, seed container with brush shaft and dosing slide. Technically good condition, but with flash rust and engine without ignition sparks - does not start. Branded product from Munich (Germany). Shipping optionally possible.

We are selling a Stratasys F370 on behalf of a customer. Maintenance contract was active until 04/2023. The machine is in very good working condition and comes with many accessories., Stratasys F370 Accessories:, - 9 Build Trays, - 1 role QSR Support, - 1 roll ABS black, - 8 printheads (2 installed), - 4x lye powder for washing out the support material, - last electrical safety test in 10/2023, network connection: LAN (Ethernet), WiFi, software: GrabCad Print (Download), Insight Software License, Installation space (x,y,z): 355 x 254 x 355, operating system: Windows 7, Windows 8, Windows 8.1, Windows 10 (64 bit only), Windows 11 at least 4 GB RAM, building material: ABS-CF10, ABS-ESD7™, ABS-M30, ASA, Diran™ 410MF07, PC-ABS, PLA, QSR Support, TPU-92A, Printing features: Replaceable extruder, heated build chamber, closed build space, two extruders (model & support), printing tech ...

ProJet 2500 Plus in very good condition, last maintenance 03/2024. Accessories: 3DS-MJP-ECS 93902324 consisting of MJP EasyClean System 230V and post-processing system, originally packaged particle filter 93902710, Installation: 2020, Print modes: HD - High Definition, print modes: HD - high definition, Net build volume (xyz) net build volume (xyz) hd mode: 294x211x144mm / 11.6x8.3x5.6in, Resolution (xyz) resolution (xyz) hd mode: 800x900x790 DPI; 32μ (0.0012 in) layers, resolution (xyz) resolution (xyz) hd mode: 800 x 900 x 790 DPI; 32μ (0.0012 in) layers, Support materials: VisiJet® M2 SUP, Building material build material: VisiJet® Armor M2G-CL – Tough,clear ABS-likeVisiJet® M2R-CL    – Rigid clear, clear polypropylene-likeVisiJet® M2R-GRY – Rigid grayVisiJet® M2R-WT   – Rigid whiteVisiJet® M2R-BK    †...

Other Info: 0 The PartPro350 xBC offers cutting edge printhead technology that delivers industry leading color partproductivity. With speeds up to 18mm per hour for a fully loaded build volume, the PartPro350 xBC is 150%faster than other color binder technologies.  Full Color Bedinder jetting: With modern and reliable full pass printhead technology,the PartPro350 xBC offers brilliantly colored models at anexcellent value. Removable Build Module for High Output: The PartPro350 xBC features a removable build module to start anew prints immediately. Faster printer turn around yieldssignificant production improvements. Instant Printing with Advanced Slicing Software: The PartPro 350 xBC´s BCPware has the capability to slice buildseffectively with two modes of operation. Instant slicing and printing   Printing materials Plaster Powder + Binder (C , M , Y + Clear)  ...

The ProJet® MJP 3600 MultiJet 3D printers produce precise parts with high accuracy and easy post-processing, resolution (xyz) resolution (xyz) hd mode uhd mode xhd mode: Resolution HD (xyz): 375x450x790 DPI; 32μm layer, resolution UHD (xyz): 750x750x890 DPI; 29μm layer, resolution XHD (xyz): 750x750x1600 DPI; 16μm layers, Accuracy (typical): ±0.025-0.05 mm per 25.4 mm of part dimension. Accuracy may vary depending on print parameters, part geometry and size, part orientation, and type of post-processing., Dimensions in mm (w x h x d): 749 x 1194 x 1511 mm, mass: about 300 kg, E-connection / consumption: 200-240 VAC, 50 Hz, single-phase, 10A 100-127 VAC, 50/60 Hz, single-phase, 15A, certification: CE, Installation: 03/2017, Commissioning: 03/2017, print modes: HD - high definition, Net build volume (xyz) net build volume (xyz) hd mode uhd mode xhd model: 11.75 x 7.2 x 8 in  ...

The ProJet® MJP 3600 MultiJet 3D printers produce precise parts with high accuracy and easy post-processing, resolution (xyz) resolution (xyz) hd mode uhd mode xhd mode: Resolution HD (xyz): 375x450x790 DPI; 32μm layer, resolution UHD (xyz): 750x750x890 DPI; 29μm layer, resolution XHD (xyz): 750x750x1600 DPI; 16μm layers, Accuracy (typical): ±0.025-0.05 mm per 25.4 mm of part dimension. Accuracy may vary depending on print parameters, part geometry and size, part orientation, and type of post-processing., Dimensions in mm (w x h x d): 749 x 1194 x 1511 mm, mass: about 300 kg, E-connection / consumption: 200-240 VAC, 50 Hz, single-phase, 10A 100-127 VAC, 50/60 Hz, single-phase, 15A, certification: CE, Installation: 03/2017, Commissioning: 03/2017, print modes: HD - high definition, Net build volume (xyz) net build volume (xyz) hd mode uhd mode xhd model: 11.75 x 7.2 x 8 in  ...

The ProJet® MJP 3600 MultiJet 3D printers produce precise parts with high accuracy and easy post-processing, resolution (xyz) resolution (xyz) hd mode uhd mode xhd mode: Resolution HD (xyz): 375x450x790 DPI; 32μm layer, resolution UHD (xyz): 750x750x890 DPI; 29μm layer, resolution XHD (xyz): 750x750x1600 DPI; 16μm layers, Accuracy (typical): ±0.025-0.05 mm per 25.4 mm of part dimension. Accuracy may vary depending on print parameters, part geometry and size, part orientation, and type of post-processing., Dimensions in mm (w x h x d): 749 x 1194 x 1511 mm, mass: about 300 kg, E-connection / consumption: 200-240 VAC, 50 Hz, single-phase, 10A 100-127 VAC, 50/60 Hz, single-phase, 15A, certification: CE, Installation: 03/2017, Commissioning: 03/2017, print modes: HD - high definition, Net build volume (xyz) net build volume (xyz) hd mode uhd mode xhd model: 11.75 x 7.2 x 8 in  ...

Very well maintained SLM 280HL 2.0 (dealer demo machine) with approx. 1450 laser hours for sale., Installation: 2018, equipment: HRSH 050 L/W 5kW cooling unit, PSM 100 V3 vibrating screen station, SLM AMC 330 safety vacuum cleaner, BPH 280 handling device, Installation space in mm (x/y/z): 280x280x350, laser power: 400W, build speed: 35 cm3/Hour 35 cm3/Hour, practice layer thickness: 20-100μm, Min. track width / wall thickness: 180µm, Operative beam focus freely selectable: 100µm - 700µm, compressed air requirement: ISO 8573-1, 18l/ bar, Dimensions in mm (w x h x d): 1800 x 1900 (2400) x 1000, Weight in kg: approx. 1000, E-connection / consumption: 400 Volt 3NPE, 32 A, 50/60Hz, 6 KW/h, exposure speed: 15 m / s, Shielding gas consumption in the process: Ar/N2, 2,5l/min, Flood shielding gas consumption: Ar/N2, 1700l/min, mass: Approx. 1000KG Approx. 1000KG, Build chamber in mm  ...

1. Cleanroom incl. ventilation technology a Manufacturer: REUKO Klima-Service GmbH & Co. KG b. Type: individual solution c. Date build: 2012 d. Use: idle operation for several months, reconstitution of medicinal products in 2 clinical trials (including cytostatics) e. Clean Room Classes: D (for Isolator environment) f. Area/rooms: Slice and laboratory (with separate air lock for goods) g. Control: Individual solution by ELREST (DDC-Controller) 2. Insulator a. Manufacturer: Envair Deutschland GmbH b. Type: CDC F 2G2D (2-Hand, Isolator clean room class A) c. Build: 06. 2012 d. Use: Reconstitution during 2 clinical trials (including cytostatics); idle operation for several months e. Details: isokinetic measuring probe, 3. Particle Analyzer a. Manufacturer: KM-Optoelektronik b. Type: PCSS c. Date build: 2010

Very well maintained SLM 280HL 2.0 (dealer demo machine) with approx. 1900 laser hours for sale., The system has been cleaned without powder and is ready for shipping. The system was professionally dismantled by SLM dealers., Direct link: https://www.maschinenmarkt.layerbylayer.de/angebote/4427000-bedarf-201 8-slm-solutions-slm-280hl-2-0-single, Installation: 2018, equipment: HRSH 050 L/W 5kW cooling unit, PSM 100 V3 vibrating screen station, SLM AMC 330 safety vacuum cleaner, BPH 280 handling device, Installation space in mm (x/y/z): 280x280x350, laser power: 400W, build speed: 35 cm3/Hour 35 cm3/Hour, practice layer thickness: 20-100μm, Min. track width / wall thickness: 180µm, Operative beam focus freely selectable: 100µm - 700µm, compressed air requirement: ISO 8573-1, 18l/ bar, Dimensions in mm (w x h x d): 1800 x 1900 (2400) x 1000, Weight in kg: approx. 1000, E-connect ...

Used SLM 280HL with twin laser and less than 2000h laser hours included:, - Sieving system PSH100 - sieve in good condition, was only used with Ti6Al4V, - vacuum suction cup, - Standard cooling unit, - powder container, - Residual powder Ti6Al4V, Installation: 2016, equipment: Sieving system PSH100 sieve in good condition, was only used with Ti6Al4V/vacuum suction cup/standard cooling unit/powder container/residual powder Ti6Al4V, Installation space in mm (x/y/z): 280x280x365, laser power: 400W, compressed air requirement: ISO 8573-1, 18l/ bar, Dimensions in mm (w x h x d): 1800 x 1900 (2400) x 1000, Weight in kg: approx. 1000, E-connection / consumption: 400 Volt 3NPE, 32 A, 50/60Hz, 6 KW/h, build speed: 35 cm3/Hour 35 cm3/Hour, practice layer thickness: 20-100μm, Min. track width / wall thickness: 180µm, Operative beam focus freely selectable: 100µm - 700µm, exposure  ...

Mark Two in great condition, like new with the following accessories:, Equipment:, 2x Onyx FFF filament - 800 cm³ spool, 3x Precise PLA FFF filament - 600 cm³ spool, 1x cleaning stick Precise PLA (desktop and X series), 1x carbon fiber CFF filament - 50 cm³ spool, 1x Kevlar CFF filament - 50 cm³ spool, 1x fiberglass CFF filament - 50 cm³ spool, 1x HSHT fiberglass CFF filament - 50 cm³ spool, 1x dry box for material storage Compact (desktop and X series), Net build volume (xyz): 320mm x 132mm x 154mm, resolution (z): 100µm - 200µm, nozzle diameter : FFF nozzle 0.4mm, CFF nozzle 0.9mm, extruder units: Double quick-change extruder, Printing break + restart possible: Yes, build platform: Kinematic coupling; Repeated positioning accuracy 0.01 mm, building material: Onyx, Nylon PA6, endless fibers: Carbon;Fiberglass;Kevlar;HSHT Fiberglass (High-Strength High-Temperature Fiberglass) ...

ProJet 3600W Max for sale in good condition. Printing time approx. 10500h, printed building material under 50KG, printed support material approx. 110KG., Installation: 03/2017, print modes: HD - high definition, Commissioning: 03/2017, Net build volume (xyz) net build volume (xyz) hd mode uhd mode xhd model: 11.75 x 7.2 x 8 in (298 x 183 x 203 mm) 11.75 x 7.2 x 8 in (298 x 183 x 203 mm) 11.75 x 7.2 x 8 in (298 x 183 x 203 mm), resolution (xyz) resolution (xyz) hd mode uhd mode xhd mode: 375 x 450 x 790 DPI; 32 μ layers 750 x 750 x 1300 DPI; 20 μ layers 750 x 750 x 1600 DPI; 16 μ layers, Accuracy (typical): ±0.025-0.05 mm per 25.4 mm of part dimension. Accuracy may vary depending on print parameters, part geometry and size, part orientation, and type of post-processing., Printing modes: UHD - Ultra High Definition, Support material support material: VisiJet S400 VisiJet S400,  ...

General SKUR0155 LocationBarneveld MakePink GmbH Thermosysteme Wertheim (DE) TypeVSD-e 300-300-120-2 Machine number2008 4823 Pressure Working pressure0.1 Bar Vacuum possiblecheck Main Features MaterialHastelloy Volume35 Ltr. Surface0.18 m2 Specified Features - Tray dryer Tray dryervacuum Stainless steel housingcheck Stainless steel trayscheck Heating surface0.18 m2 Drying chamber capacity35 Ltr Max. temperature150 degr. C Number of trays2 Tray sizes300x300mm Distance between the trays120mm Max. temperature150 degr.C. With 1 doorcheck Connection for the vacuum pumpDN25 Connections(2x) DN10 Without vacuum pumpcheck MaterialStainless steel 2.4602 (Hastelloy C-22) Information Year of construction2008 Mounted on framecheck With switchgearcheck Floorspace2.2x1,0 M CEcheck Total height2,4 M Weight1150 Kg Extra Specificationsin Pink Isolator, Type ISO 1900-7 ...

3D-SYSTEMS ProJet 660 Pro 3D Printer Here we offer you a 3D-SYSTEMS 3D printer. The ZPrinter ProJet 660 Pro 3D printer has a large installation space. This means that even large models can be produced without prior cutting. Furthermore, the large footprint increases productivity when printing many small models in one printing process. 3D color printers with tremendous productivity and color fidelity. The ProJet ColorJet color 3D printers from "3D Systems", also known as ZPrinter, work layer-forming according to the ColorJet CJP "Binder Jetting" process, directly in a powder bed. As a result, even with complex and detailed printouts, these 3D printers do not require dedicated support structures. The non-solidified powder supports the components during printing and is then recycled semi-automatically. Applications Communication of form and design, installation analyses, first fun ...

Qty. 1 Second-hand paper mill for production of SC-A paper (Super Calendered) Mfc.: Valmet Built: 1971 Rebuild 1990 and 2004 Product: uncoated magazine paper Production capacity 290 000 tonnes Basic weight range: 44 – 57 g/m2 Width: 8.35 m Speed: 1500 m/min 3 Super calanders 3 Winders Raw materials: groundwood pulp, thermomechanical pulp, chemical pulp and fillers Paper machine basic information Headbox Valmet OptiFlo 2 with dilution profiling (2004) Wire section Valmet OptiFormer LB (loadable blades) (2004) Press section Valmet SymPress B with 4th press (1990/2004) Shoe press in 3rd nip (2004) Drying section Valmet SymDry (1990) 4 single tier drying groups, 2 double tier drying groups Ropeless tail threading (1990/2004) CD weight control with dilution valves 2004, Metso DNA. Moisture profiling at press section with Measurex-Devron steambox 1992 (57 contro ...

- fully functional - was used until recently by an automobile manufacturer - with integrated brake maintenance device ROMESS S22 - Visit by appointment Use: - Testing of brake squid to function Pruef features: - Geraeusche at beta-ether - Tightness in the vacuum range - Tightness in the brake pressure circuits - Uniform pressure distribution in the brake circuits - Pressure build-up in the brake circuits Operation: - The testing is performed "by hand" - The pressure build-up takes place via a deflection mechanism - Manual setting of the vacuum - Filling of the brake device by means of a built-in Romess system and simultaneous disenification of the brake circuits, 33eflt0hx - Extraction of the brake fluid from storage equipment by means of Romess Plant Building: - Stationaerer Pruefplatz - Profile frame construction - Tueren with Mangnet stop - Drawers for a ...

Portal straightening press with 400 T capacity Oil-hydraulic double column press a) No-load and pressing speed up to 17 mm/sec b) Opening speed up to 60 mm/sec c) Table size 6000x3000mm d) Open height 1500 mm e) Total size approx. LBH 6000 x 5000 x 4500 mm f) OIL temperature display on the tank g) Lubrication via lubrication nipples h) table in grid construction, i) Operation on swivel arm, mounted on the bridge j) Pressure setting from 60 T to 400 T via MONITOR k) Bridge moves through two geared motors, over racks l) Cylinder moves to the left and right over racks m) Machine body powder-coated, or double-painted n) T-grooves according to customer requirements o) Cylinder induction hardened PORTAL PRESS Thermally neutral 80 – 120 °C Number of operating pages 3 pages Forces Pressing force max. 4000 kN Free tearing force ...

Portal straightening press with 300 T capacity a) No-load and pressing speed up to 17 mm/sec b) Opening speed up to 55 mm/sec c) Table size 2500x1600mm d) Open height 700 mm e) Total size approx. LBH 4500 x 2300 x 3700 mm f) OIL temperature display on the tank g) Lubrication via lubrication nipples h) Table in grid construction, with T grooves according to customer requirements, otherwise 22mm i) Operation on swivel arm, mounted on the bridge j) Pressure setting from 50 T to 300 Tvia MONITOR k) Bridge moves through two geared motors, over racks l) Cylinder moves to the left and right over racks m) Machine body double painted n) Cylinder induction hardened Design Press type PORTALPRESSE Thermally neutral 80 – 120 °C Number of operating pages 3 pages Forces Pressing force max. 3,000 kN Free tearing force max. 500 kN Pressure build-up time Closed tool St ...

Double column press with 200 T output, Idle speed 45 mm/sec Opening speed 60 mm/sec Starting press speed 9 mm/sec Table size 2000x600mm Plunger size 2000x600mm OIL temperature monitoring Manual lubrication Free positioning of the plunger ( adjustable via adjustable sensors ) PILZ photoelectric sensors 14.1 mm on front and back Circulatory oil cooling Pressure retaining valve 0 to 600 sec. Mechanical plunger protection at the upper breakpoint T-grooves according to DIN, and according to customer requirements Pressure adjustment from 40 T to 200 T (adjustable via rotary knob) Travel limitation optionally via pressure or position Set-up operation, single stroke ( adjustable via key switch ) Two-hand operation Construction, commissioning, instruction against separate calculation Design Press design double column press Therma ...

Hydraulic 20 T single-stand production press for the production of lightweight concrete parts Here are the technical data of the offered machine: If the press does not exactly meet your requirements profile, please request an individual offer exactly according to your wishes with one click: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your wishes at surprisingly low prices! Technical data + information: a) Closing speed up to 10 mm/sec b) Opening speed up to 20 mm/sec c) Open maximum height 300 mm d) Pressing speed 4 – 10 mm/sec. ( adjustable via rotary knob ) e) Mould size 600x800 mm f) Plunger size950x600 mm g) Manual lubrication( via lubrication nipples ) h) Pressure setting from 5 T to 20 ( adjustable via rotary knob ) i) Travel 300 mm j) Construction, commissioning, instruction against separate calculation  ...

Single-column press with 15 T power suitable for continuous shift operation (a) travel speed 10 mm downwards; b) Opening speed up to 25 mm/sec c) Starting pressing speed 10 mm/sec d) Table size 400x400 mm e) Ram size 200x200 mm, with T slots and central cylinder tension f) Total size approx. 1150x800x1750 mm g) Oil temperature display on the oil tank h) Pressure adjustment from 5 T to 17 T (adjustable via rotary control) i) Two-speed hand lever operation j) Machine body powder-coated, or double painted k) Control cabinet supply cable from above with 3000 mm cable and 16 ampere plug l) Installation, commissioning, instruction against separate charge Press type single-column press Thermally neutral 80 – 120 °C Number of operating pages 1 page Forces Pressing force max. ( at 250 bar ) 150 kN Free tear-off force max. 10 kN Pressure build-up time Closed tool Stee ...

Here are the technical data of the offered machine: Technical data + information: • No-load speed up to 40 mm/sec • Opening speed up to 40 mm/sec • Starting press speed 5–15 mm/sec • Table size/heating plate size 600 × 600 mm • Plunger size/heating plate size 600 × 600 mm • 2 heating plates, electrically heated, up to 250 degrees – as OPTION • Total size approx. 2000 × 1000 × 2800 mm height • OIL temperature monitoring • Automatic lubrication • Free positioning of the plunger • SICK/LEUTZE light barriers 14.1 mm on the front • Circulating oil cooling • Pressure holding valve 0 to 1800 sec. • Rear monitored door • Pressure adjustment from 30 T to 120 T • Travel limitation either by pressure or position • Programming set-up mode, single stroke (adjustable via rotary switch) • Control panel permanently installed in the wall  ...

Very little used Stratasys F370 for sale. Last maintenance in 07/2021, operating hours: approx. 120h, network connection: LAN (Ethernet), W-LAN, software: GrabCad Print (Download), Insight Software License, Installation space (x,y,z): 355 x 254 x 355, operating system: Windows 7, Windows 8, Windows 8.1, Windows 10 (only 64-bit), Windows 11 at least 4 GB RAM, building material: ABS-CF10, ABS-ESD7™, ABS-M30, ASA, Diran™ 410MF07, PC-ABS, PLA, QSR Support, TPU-92A, printing features: Interchangeable Extruder, Heated Build Chamber, Closed Build Chamber, Two Extruders (Model & Support), printing technology: FDM - Fused Deposition Modeling, number of nozzles: 2, nozzle diameter: T14 (0.3556mm), Layer thickness: minimum 0.127mm

Key data: 400 t, 800 mm

Oil-hydraulic double-column press 400 T with sliding table Press type: Double column press Thermally neutral 80 – 120 °C Number of operating pages 1 page Forces Pressing force max. 4000 kN Free tear-off force max. 400 kN Print build-up time Closed tool steel on steel Max. 4 sec. Dimensions: 3,800 mm long and 4,475 mm wide Max. opening width 800mm Stroke 800mm Table height above floor 1100mm Height above ground (height) approx. 4300 mm Hall height min. 5500 mm Parallel deviation at 20°C +/- 0.1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.2 mm/m Weight Total weight of the press without consumables and table top approx. 28 tons Press table Table size 1500x1500 mm Velocities Quick closing at 100 mm sec. Pressing speed 8 – 3 mm sec. Acoustic pressure Sound pressure level, measured at a height of 1.5m on the control pane ...

58 Mw MAN 18V48/60TS power plant 50 Hz 3 x Man 18V48/60TS generators together with auxilary equipments Approx 4000 Working hours each 58 Megawatts total power 19305kw each at 500 RPM and 50 Hz Engines year of build 2014 with ABB AMG1600UU12 DSE Alternators Alternators year of build 2015

Solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, on-off valve, pressure build-up valve -Manufacturer: Festo, on-off valve pressure build-up valve orig -Type: HEL-D-MIDI Mat. no. 170691 U643 series -Working pressure: 3 - 16 bar -Dimensions cardboard: 65/55/H130 mm -Weight: 0.5 kg.

Icma San Giorgio MCM/60V – 40D twin screw co-rotating extruder Mod. MCM/60V-40 D and down stream equipment High performances, intermeshing screw type for self cleaning characteristics. Screws Ø 60 mm Nominal L/D ratio 1:40 Max screw speed 300 rpm Barrel Modular design made up by 10 square-barrel sectors, each one 4 D long Barrel sectors made of LK3 nitrided steel Built-in water cooling circuit, simple construction and easy to maintain High efficiency heating system by cartridge heater Broached shaft made in special alloy brake/yield/torsion resistant Modular design Screw elements made of K 110 wear resistant steel Gear box Torque per screw shaft Nm. 1050 per each shaft Gear-ratio 4.28 : 1 Min. bearing lifetime at max. speed and motor power 20,000 working hours @ 160 bar Main A.C. motor Power applied to gearbox shafts KW 66 Speed rpm 1285 Water cooling unit  ...

01 Product to be filled CSD 02 Type of Bottle RoundBottles 03 M O C of the Bottle PET Bottles 04 Fill Volume Bottle sizes 500ml 05 Type of Caps Screw Caps 06 Type of Labels BOPP 07 Output required 416 Bottles Per Minute on 500 ml BLOWER SIPA 16 CAVITIES 2007 WITH MAINTENNACE OPERATION Used blow molding machine for PET bottles with production capacity up to 25 000 bph with the 500ml format Year of construction 2007 Used blower complete with Octagon tipper Air recovery system preform hopper This machine is immediately available for sale and in case of request we can carry out pre production maintenance Detached from production in fully functional status is excellent opportunity for used equipment We will build new neck personalization for pco 1881 We will build two new set of blow mould as per your request Air conveyor system NEW used revised 2024 NEW RINSER FILLER SCREW CAPPER SPORT CAPPE ...

General SKU268N294 LocationBarneveld MakeParker Baston TypeNitrogen generator N2-22 Year of construction1994 Main Features MaterialMild steel Volume50 Ltr. Specified Features - Miscellaneous MaterialMild steel Capacity50 Ltr (at 7 bar and 95% pureness) Information Floor space2,0x1,5 M Total height2,7 M Weight900 KG Extra Specifications (1x) Nitrogen generator, manufacturer Parker, Typ N2-22 : (1x) Vessel, manufacturer Otto Klein, Type no.224463, Content 2000 Ltr, Build 1977, Pressure :11 bar (1x) Vessel, manufacturer Gianesi Edilio, Type No.9767, Content 250 Ltr, Build 1994, Pressure 12 bar MiscellaneousParkerMiscellaneous > MiscellaneousBrand > Parker What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The N ...

Description: 3D Printer ProMaker P1000X - 3D Printer by powder Laser Sintering Serial Number: 001-0010-SNO0065 Mixer for Plastic Powder Protool MXO2, Mixing Apparatus Serial Number : 001-5200SN40 Year of fabrication: 2020 MACHINE SPECIFICATIONS Power supply: 210-240 VAC 50/60 Hz – Single phase Total power: 6.5 – 7.7 KVA Power consumption: 3 KWh Maximum current: 32 A Machine electrical line: Dedicated Line circuit-breaker: 32A C curve Overall dimensions (W/D/H): 1545 x 1055 x 2125 mm Total weight: 700 kg Room temperature: 18°C to 28°C (23±3°C recommended) Air extraction: >, 3 air changes per hour Room relative humidity: 40-50%. Ceiling clearance: 0.6 m Left-side clearance: 0.6 m Rear clearance: 0.6 m Right-side clearance: 1 m - Build chamber size (LxWxH): 300 x 300 x 360 mm Build rate @0.1mm layer thickness ( Depending on material, geometry and nesting density): liters/h ...

There are one HA60 and one HA90 available (1) rapidshape HA60, x-travel: 110mm, y-travel: 62mm, z-travel: 90mm, resolution native pixels: +/- 30μm, tolerance guarantee: