buffing machine used for sale

Chain resisters L x W x H: 1.2 x 0.8 x 2.2 m Weight approx. 480 kg Year of construction 1977 The machine is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

max. wheel diameter: 350 mm gear width: 350 mm max. module: 8 min. module: total power requirement: 7,5 - 22 kW weight of the machine ca.: t dimensions of the machine ca.: m Gear hobber with gear shaping device, 2-cut cycle The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

From one place in germany: folding machine Manufacturer: Faltex A3 4 bags Price: on request Collator Manufacturer: UCHIDA A3 8 stations Price: on request Package Price: on request

-Model Colatrice REL 600 -with digital foil keyboard -380 volts -50 Hz -Year of construction 2001

End Milling Machine Drill Milling Machine working width mm: 3200 Left - right swivelling saws from 0° - 45°. Complete with drilling unit Suitable for machining doors and door posts.

Bosch Rexroth Linear Cylinder Machine The machine is a special production for Bosch for its own use in the production process. The machine contains: Rexroth MSK050C-0600-NN-M1-UG1-NNNN 3-Phase Synchronous PM Motor Festo DGC-40-650-KF-Y5R-A 532449 H608 Rexroth EMC-063-NN-2 Schischke MY_1106 E2 - Voltage 380-480, 6 bar, 1300 kg, year of construction 2016 Condition: used The plant is located in Hildesheim and can be dismantled and picked up there by the customer. Dismantling and transport according to offer and agreement also possible by us. Complete plant closure, large selection of mezzanine, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines

2 needle cylinder arm hem machine, with lower deck seam, with thread cutter and foot ventilation, Efka motor with 380 Volt Condition: good (used)

Vibrating screening machine VS 1000-1 Decker: - Modular and expandable modular system - Dustproof and safe to work - External/internal screen frames depending on the equipment - Stable design - Easy disassembly and cleaning of all components - Set ready for connection and ready for operation - Conical bottom for the discharge of the fine material - Drive via motors with ATEX protection zone 22 (standard) - German operating instructions (other languages at extra charge) - Ball tapping cleaning incl. standard balls per screen deck (standard) Size (mm) 1000 Screen area (m²) 0.694 - 0.785 Interference circle diameter (mm) 1620 Drive power (kW) 1.25 Weight (kg) 248 - 330 1 deck (total height mm) 1275 - 1285 Screening machine for screening in 2 fractions. All wetted parts blasted from VA 1.4301 (standard) and glass beads. Seals Screen frame made of silicone material (s ...

Rubber balls as wear material for your screening machines, vibrating screening machines, tumble screening machines: Diameter: 30mm Material: EPDM, NR/SBR, silicone, PUR, silicone (detectable), polyurtehane (detectable) Quantity: 1 pack (100pcs) possibly small quantities Price: On request (Other diameters as well as materials and colors on request, only partially in stock, attention possibly minimum order quantity)

Deflector profile in various versions as wear material for your screening machines, vibrating screening machines, tumble screening machines: Height: 27mm Material: Silicone Price: On request After technical testing by KELLNER Siebtechnik, our spare and wear parts are also suitable for individual machine models from competitors. (Other diameters as well as materials and colors on request, only partially in stock, attention possibly minimum order quantity)

Deflector profile in various versions as wear material for your screening machines, vibrating screening machines, tumble screening machines: Height: 27mm Material: Silicone Price: On request After technical testing by KELLNER Siebtechnik, our spare and wear parts are also suitable for individual machine models from competitors. (Other diameters as well as materials and colors on request, only partially in stock, attention possibly minimum order quantity)

Rubber lids as wear material for your screening machines, vibrating screening machines, tumble screening machines: Outer diameter: 100 / 150 / 200 / 250 and 300mm Material: NR45 and silicone Price: On request After technical testing by KELLNER Siebtechnik, our spare and wear parts are also suitable for individual machine models from competitors. (Other diameters and materials on request, only partially in stock, attention possibly with minimum order quantity)

Rubber lids as wear material for your screening machines, vibrating screening machines, tumble screening machines: Outer diameter: 100 / 150 / 200 / 250 and 300mm Material: NR45 and silicone Price: On request After technical testing by KELLNER Siebtechnik, our spare and wear parts are also suitable for individual machine models from competitors. (Other diameters and materials on request, only partially in stock, attention possibly minimum order quantity)

SWECO seal as wear material for your screening machines, vibrating screening machines, tumble screening machines: Size: 30" / 40" / 48" / 60" Material: NBR Price: On request After technical testing by KELLNER Siebtechnik, our spare and wear parts are also suitable for individual machine models from competitors. (Other diameters and materials on request, only partially in stock, attention possibly minimum order quantity)

SWECO seal as wear material for your screening machines, vibrating screening machines, tumble screening machines: Diameter: 996 7 1496 7 1996 Material: NBR/SBR 408 RED and NBR 60 HELL Price: On request After technical testing by KELLNER Siebtechnik, our spare and wear parts are also suitable for individual machine models from competitors. (Other diameters and materials on request, only partially in stock, attention possibly minimum order quantity)

SWECO seal as wear material for your screening machines, vibrating screening machines, tumble screening machines: Size: 30" / 40" / 48" / 60" Material: NBR Price: On request After technical testing by KELLNER Siebtechnik, our spare and wear parts are also suitable for individual machine models from competitors. (Other diameters and materials on request, only partially in stock, attention possibly minimum order quantity)

Struts Tumble screening machine as wear material for your screening machines, vibrating screening machines, tumble screening machines: Size: 25 by 6mm Material: NBR (FDA) Price: On request After technical testing by KELLNER Siebtechnik, our spare and wear parts are also suitable for individual machine models from competitors. (Other diameters and materials on request, only partially in stock, attention possibly minimum order quantity)

Hoses and clamps as wear material for your screening machines, vibrating screening machines, tumble screening machines: Hose: Size: Length 425mm Material: NR/NBR Price: On request After technical testing by KELLNER Siebtechnik, our spare and wear parts are also suitable for individual machine models from competitors. (Other diameters and materials on request, only partially in stock, attention possibly minimum order quantity)

Struts / rubber spring tumble screening machine as wear material for your screening machines, vibrating screening machines, tumble screening machines: Size: Length 425mm Material: NR/NBR Price: On request After technical testing by KELLNER Siebtechnik, our spare and wear parts are also suitable for individual machine models from competitors. (Other diameters and materials on request, only partially in stock, attention possibly minimum order quantity)

Dampers / damping elements as wear material for your screening machines, vibrating screening machines, tumble screening machines: Size: 50x50 / 60x60 with M10 Material: NBR 45 +/- 5 Shore Price: On request After technical testing by KELLNER Siebtechnik, our spare and wear parts are also suitable for individual machine models from competitors. (Other diameters and materials on request, only partially in stock, attention possibly minimum order quantity)

Cable peeling machine recoem HKS-90 Knife block adjustable in depth and height, so that the pressure on cable heights or decrease. Year of construction: New Cable diameter: Min. 1mm 90 mm Power : 4 kW Weight : 550 kg Dimensions : L x W x H 1440 x 720 x 1200

U-profile seal IL (internal) as wear material for your screening machines, vibrating screening machines, tumble screening machines: Size: 600 / 800 / 1000 / 1200 / 1400 / 1600 / 2000 / 2600 / or on request by the meter Material: NBR/NR45 and silicone Price: On request After technical testing by KELLNER Siebtechnik, our spare and wear parts are also suitable for individual machine models from competitors. (Other diameters and materials on request, only partially in stock, attention possibly minimum order quantity)

U-profile seal IL (internal) as wear material for your screening machines, vibrating screening machines, tumble screening machines: Size: 600 / 800 / 1000 / 1200 / 1400 / 1600 / 2000 / 2600 / or on request by the meter Material: NBR/NR45 and silicone Price: On request After technical testing by KELLNER Siebtechnik, our spare and wear parts are also suitable for individual machine models from competitors. (Other diameters and materials on request, only partially in stock, attention possibly minimum order quantity)

Storage system in custom-made design for your sieve bread and screen frames: Size: 600 / 800 / 1000 / 1200 / 1400 / 1600 / 2000 / 2600 Material: Steel + powder coating also Customized Price: On request

Offer via Gebr. overhauled pipe cutting chamfering machine Fabr. GF GEORG FISCHER Type RA12 Saw was completely overhauled and tested. - completely new drive motor. - Gearbox re-bearings and new seals Specifications: Pipe outer diameter 215-325mm Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 40 - 215 rpm. Speed stages electronic 1 - 6 Power 1800 W incl. feeding unit and auxiliary unit used, in good condition.

Offer via Gebr. overhauled pipe cutting chamfering machine Fabr. GF GEORG FISCHER Type RA12 Saw was completely overhauled and tested. - completely new drive motor. - Gearbox re-bearings and new seals Specifications: Pipe outer diameter 215-325mm Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 40 - 215 rpm. Speed stages electronic 1 - 6 Power 1800 W incl. feeding unit and auxiliary unit used, in good condition.

E-welder ESAB type LTG 250 Rod electrode welder Masch. No. 736-820-387 Year of construction 1997 Power 250 Amp. = 35 % ED 190 Amp. = 60 % ED 150 Amp. = 100 % ED Power adjustment: infinitely variable - electrode holder with 6 meters connection cable - DC fan - air cooling - possibly also TIG welding possible, without hose package Mains connection 380 Volt, 50 Hz, 32 Amp. Plug Space requirement L x W x H 1200 x 750 x 1050 mm Weight 180 kg good condition Device was originally also designed for TIG welding. The hose package for TIG welding is not available and the function has not been tested. The water cooling was for the hose package for TIG welding. The device is therefore sold only as an electrode welding machine.; used

Hand - Swivel bending machine KRAMER type AMS 650 x 1.5 Hand swivel bending machine, bending bench Year of construction approx. 1985 Working length 650 mm Sheet thickness at 40 kg/mm2 1.5 mm Upper cheek opening approx. 60 mm Bending cheek adjustment approx. 0-25 mm Bending angle 0-180- Upper cheek adjustment via hand crank - Pre-screw rail for the bending clamp - one-piece sharpening rail 135 Space requirement L x W x H 1200 x 600 x 1100 mm Weight 160 kg good condition; used

Rotary indexing machine Special machine with several assembly stations Hydraulic press + spot welding machine + much more Production and assembly system in rotary transfer process for front panel AC-DC connection plates rotary indexing machine manufacturer: AKE-technologies GmbH Serial number: 01-45-064 Number of mandate: 11111 Year of construction: 2012 - large rotary indexing table - pressing station with TOX power pack - 2 welding stations for resistance welding - several vibation conveyors - conveyor belts - testing station space requirement L x W x H approx. 3500 x 2750 x 2300 mm net weight approx. 4000 kg; used

Univ. Tool milling machine, milling machine MAHO type MH 400 P Masch. No. 41364 Year of construction 1981 Control Heidenhain TNC 125 (Active Digital) Travel paths with feed X: 360 mm, Y: 200 mm, Z: 375 mm Travel paths with hand wheel X: 400 mm, Y: 250 mm, Z: 375 mm Table size 690 x 270 mm Spindle holder ISO 40 Tool clamping hydraulic Spindle speed 40 - 2500 rpm infinitely variable feed X and Z-axis 5 - 1000 mm /min. infinitely variable Feed Y-axis 5 - 670 mm/min. infinitely variable rapid traverse X + Z = 1.2 m/min., Z = 0.8 m/min. Pinol shift Vertical 50 mm Spindle drive 2.2 kW Mains connection 380 Volt, 50 Hz - conventional handwheels for X, Y, Z - el. Control cabinet fixed to the machine- Coolant device in the machine foot - Operating instructions Space requirement L x W x H 1700 x 1100 x 1820 mm Weight approx. 900 kg good condition; used

Internal threading machine Hagen & Goebel type HG 124 Masch. No. 4112 Year of construction approx. 1980 Cutting capacity M 3 to M 18 in brass M 3 to M 10 in steel projection 250 mm Table size 345 x 245 mm Spindle speed 200 - 1000 rpm. Motor power 0.55 / 1.0 kW Mains connection 380 volts, 50 Hz - 6 speed levels via belt change (3 steps via belt + 2 engine speeds) - Table height adjustment with rack via hand crank on the round column - without guide cartridge - Drill chuck 1 to 13 mm- Tool holder 25 mm cylindrical shaft holder Space requirement L x W x H 900 x 500 x 1800 mm Weight 260 kg good condition; used

Magnetic drilling machine, magnetic drilling machine Core hole drilling machine, Metal core hole drilling machine DR. BENDER Type EK 323 Masch No. 180543 Year of construction approx. 1988 Drilling capacity 23 mm Spindle holder MK 2 Spindle speed 160 / 400 / 1250 rpm. Magnet 215 x 105 mm Drilling unit 220 Volt, 50 Hz, 1025 Watt E-magnet 220 Volt, 50 Hz, 65 Watt - Spindle speed via 3 gear stages - Left and clockwise rotation - E-magnet KOCH, type KL32/6 - Drill head height adjustment guided in a linear guide - manual expulsor - Drill stand rotatable on magnetic base, clamping via toggle screw Dimensions L x W x H 680 x 380 x 630 mm Weight 35 kg good condition; used

CNC flame cutting machine BACH type ACW 2500 Flame cutting machine with CNC control NBS 400 Masch. No. 14 561-06 Year of construction 2006 Cutting area 2500 x 6500 mm Raceway length 8000 mm Track width 3345 mm Height of running track 650 mm 2x machine cutting torch with firing table; used

Spot hump welding machine NIMAK type PMP 5 / 35 spot welding machine, projection welding machine Fabr. No. 88100 Year of construction approx. 1988 Power at 50% ED 35 kVA Radius 250 - 450 mm Working stroke 40 mm Electrode force 100 - 460 kp infinitely variable Electrode force at 6 bar 460 daN Operating air pressure 2 to 6 bar Electrode arm 60 mm Electrode holder 30 mm Insert electrodes Cone MK 2 17.78 mm Arm distance 200 / 400 mm Adjustability of the electrode holder 200 mm Connection load 83 KVA Mains connection 380 volts, 50 Hz - 4-times control - stepless power adjustment - single points and series points - bulging electrode guide - water-cooled (without cooling unit) - electric foot switch Space requirement L x W x H 1200 x 650 x 1500 mm Weight 300 kg good condition; used

Brush deburring machine, tube deburring machine BAUER Type BE 1 Masch. No. 29-0520 Year of construction 1992 Brush diameter 250 mm Brush width 25 - 55 mm Speed 1500 / 3000 rpm. Power 2,2 / 3 kW Mains connection 380 Volt, 50 Hz - Material support Space requirement L x W x H 500 x 450 x 440 mm Weight 45 kg good condition; used

Brush deburring machine, pipe deburring machine BAUER Type BE 1 Masch. No. 05-72025 Year of construction 2005 Brush diameter 250 mm Brush width 25 - 60 mm Speed 1500 / 3000 rpm. Power 2,2 / 3 kW Mains connection 380 Volt, 50 Hz - Material support - new deburring brush Space requirement L x W x H 550 x 450 x 440 mm Weight 65 kg good condition; used

MAJA RVE 800 S Flake ice cream machine Flake ice cream machine is versatile: For cuttering in the production of boiled sausage Production of bakery products and dough pieces Refrigeration of fish and seafood filling of fresh food counters in supermarkets, Delicatessen departments Decorative cooling of buffets Year of construction 2009 Ice capacity 800 kg/24h Power 400 V, 740 W Refrigerant R404A For connection to external refrigeration unit (not included) Dimensions approx.: 150 x 147 x H 240 cm More scales - new and used - can be found in our shop! International shipping costs on request!

SCM Swivel spindle milling machine - T110 i Product name: Swivel spindle milling machine Type: T110 i Manafacture: SCM Machine number: 071215 Year of construction: 1996 Condition: used, overhauled Technical details: - Table dimensions: 1,000 x 650 mm - Table height: 920 mm - Useful length of the milling spindle: 150 mm - Adjustment range of the milling spindle: 150 - 20 mm - Spindle diameter: 30 mm - Spindle speeds: 3,000 / 4,500 / 6,000 / 8,000 / 10,000 rpm - Number of rings of the table insert: 5 pieces - Diameter suction nozzle: 120 mm, 2 pieces - Foldable Aigner integral stop - FRIED chip trapping and milling protection device - VARIOFEED feeder, 3 wheels - 2 x table extension, each 1,100 mm - Weight: 430 kg - Swivel range of the milling spindle: -5° to 45° Engine data milling machine: - Power: 4 kW - Voltage: 380 V - Current: 9 A - Frequency: 50 Hz ...

Flexipak Refurbished 3 years ago Speed : 1800 c/h on 125 g Cup dimensions : 73mm and 95 mm Comprises pot drop, liquid fill, lid drop, heat seal, over lidder Motorised 3 metre conveyer Heated 30 litre feed tank with stirrer.

Make : TREPKO Model : 222 KPS Year Of Manufacture : 2004 Machine Dimensions : 1,35 x 1,55x 3,32 metres with conveyor 3,2 meters Product : Butter / Margarine/soft products Cup Dimensions : 115 mm x 75mm Volume : Min 180ml | Max : 500ml Cleaning : CIP Hours : 688,45 Plastic Cup With Aluminium Lid and Cover Cap Condition : Good

Make : Regal Model : 9000 YoM: 2004 Refurbished in 2018 Current Cup Dimensions: 71 mm ( This can be changed on request) Speed : 2400 Cups per Hour Stations : Cup Dispenser- Filler - Aluminium Lid - Sealing - Outfeed conveyor Controls : Very Good condition Available : Immediately after service Location : Dairy Machinery UK