bucket used for sale

With content Auction-ID: A1-50663-1589

Auction-ID: A1-41281-384

Auction-ID: A1-41281-23

Cutting width 325 mm, capacity 105 litres Auction-ID: A7-51315-90

LxWxH: 40x46x45 cm,

Dimensions LxWxH: 60x40x40 cm,

Recording width 80 cm, recording width 26 cm, bolt 9 cm, height 190 cm, depth 215 cm

NEW, 2,40 m working width, 2.0 m³ capacity, 658 kg weight, suitable for Bobcat telescopic handler attachment

HITACHI ZX135 TILT BUCKET Width 1950mm Beam/Beam 670mm Depth 460mml Auction-ID: A3-46111-36366

This lot is unused ; Auction-ID: A1-51150-30

NEW, 300 cm working width, approx. 2.20 m³ capacity, 800 kg weight, with JCB Q fit attachment

ID3710 O&K SRB100 year/Year of construction ca. 1982 55 t Bucket wheel excavator, overhauled with a new bucket wheel and new excavator buckets in 2013. Worked for only a few hours after the overhaul, some of the excavator buckets are now missing.,Bucket volume 100 Liter, Conveyor width 800 mm, theor. Output 500 cbm/h, Electric power installed 190 KW, Bucket wheel diameter 4000 mm, Bucket wheel drive power 75 KW, Length of bucket wheel boom 6000 mm, Length of discharge boom 10.000 mm Bucket wheel excavator, overhaul and new bucket wheel and new excavator buckets in 2013. Only a few hours after overhaul, some of the excavator buckets are now missing. Bucket volume 100 litres, conveying width 800 mm, theoretical flow rate 500 m³/h, installed electrical power 190 kW, bucket wheel diameter 4000 mm, bucket wheel drive power 75 kW, bucket wheel boom length 6000 mm, boom length 10,000 mm

KITZINGER contino 250BS1 bucket washing system, still in original packaging, System structure:, 1. 2000mm inlet table, wash material transport via scan belt chain with cams every 500mm, fixed pass-through height 400mm height (hold-down device adjustable with M6 threaded rods), bottom partially open with space for 1 E2 container as dirt trap, horizontal pass-through opening downwards, self-draining bucket bottom, 2. Washing 1000mm long, tank 400l with large outer filter housing, EDUR stainless steel circulation pump 4kW 1500l/min at 1.5bar, heating 20kW steam directly with Spirax Sarco mixing nozzle, 3. Rinse with fresh water, hourly requirement 300-400l (adjustable), length 800mm, including steam countercurrent, Inlet table 2000 mm Washing 1000 mm Rinsing 800 mm Neutral area 500 mm Blow-off 1800 mm Outlet 2000 mm Total length 8100 mm, KITZINGER contino 250BS1 bucket washing system, pump  ...

Shovel Aluminium ALU Weigh Bucket Flour Shovel 290 mm( 2 pieces )Aluminium die-cast polishedTotal length approx. 290 mm375mlWeight approx. 184 gATTENTION: Aluminium is not dishwasher safe! Details see picture

This lot is unused ; Auction-ID: A1-51150-72

Shovel Aluminium ALU Weigh-in Bucket Flour Shovel 265 mm ( 2 pieces )Die-cast aluminium polishedTotal length approx. 265 mm285mlWeight approx. 120 gATTENTION: Aluminium is not dishwasher safe! Details see picture

Shovel Aluminium ALU Weigh scoop Flour scoop 250 mm ( 2 pieces )Die-cast aluminium polishedTotal length approx. 250 mm250mlWeight approx. 98 gATTENTION: Aluminium is not dishwasher safe! Details see picture

Digging bucket, excavator bucket, demolition bucket, trenching bucket -Design: stable -Width: 420 mm -Height: 1010 mm -Depth: 1370 mm -Intermediate mounting dimension: 275 mm -Hole diameter: Ø 60 mm -Laceration teeth -The attachment to the spoon: can be changed by us for an additional charge. -Empty weight: 360 kg

HITACHI ZX225 BLADE CLEANING BUCKET Width 2150mm Beam/Beam 700mm Depth 700mm Auction-ID: A3-46111-36363

150cm wide. tiltable. Auction-ID: A3-46111-8224

HITACHI ZX225 TOOTH BACKHOE BUCKET Width 1500mm Blade/beam 105mm depth 800mm Auction-ID: A3-46111-36365

Digging bucket, excavator bucket, demolition bucket, trenching bucket -Design: stable -Width: 500 mm -Height: 900 mm -Depth: 1100 mm -Intermediate mounting dimension: 185 mm -Hole diameter: Ø 50 mm -teeth of tearing -The design of the spoon attachment can be changed by us for an additional charge. -Empty weight: 190 kg

Backhoe bucket, excavator bucket, demolition bucket, trenching bucket -Execution: very stable -Width: 850 mm -Height: 1060 mm -Depth. 1600 mm -Zeppelin quick change adapter NADO -ripping teeth -Number: 2x excavator buckets available -Price: per piece -The mounting on the spoon can be changed by us at an additional cost -Dimensions: 850/1600/H1060 mm -Own weight: 600 kg

Digging bucket, excavator bucket, demolition bucket, trenching bucket, excavator bucket -Excavator bucket: heavy-duty, very stable -Width: 1220 mm -Height: 950 mm -Depth: 1380 mm -Photograph: Atlas 1704, dimensions see photos -teeth of tearing -Load hook -The attachment to the spoon: can be changed by us for an additional charge. -Empty weight: 814 kg

Backhoe bucket, excavator bucket, demolition bucket, trenching bucket, excavator bucket -Excavator bucket: heavy design, very stable -Width: 410mm -Height: 630mm -Depth: 1050 mm -Hole: bore Ø 45 / 52 mm, dimensions see photos -teeth -the holder on the spoon: can be changed by us for an additional charge -Transport dimensions: 1050/410/H710 mm -Weight: 116 kg with pallet

Side tipping bucket, wheel loader bucket, earth shovel -Manufacturer: Kramer, wheel loader shovel, wheel loader shovel, heavy duty, very stable -Bucket width: 1650 mm -Inner mounting width: 865 mm -Hole: bore Ø 40 / 50 mm, dimensions see photos -Holders: for ripper teeth -Dimensions: 760/1650/H770 mm -Weight: 240kg -Own weight: 480 kg

Digging bucket, excavator bucket, demolition bucket, trenching bucket, excavator bucket, ditch cleaning bucket -Manufacturer: KFL, excavator bucket, digging bucket type T185 -Width: 880 mm -Height: 775 mm -Depth: 960 mm -Internal width of opening: 280 mm -Mount: Bore Ø 60 mm, dimensions see photos -The attachment to the spoon: can be changed by us for an additional charge. -Transport dimensions: 960/880/H830 mm -Weight: 228 kg

This lot is unused ; Auction-ID: A1-51150-16

This lot is unused ; Auction-ID: A1-51150-20

Auction-ID: A1-51150-81

Swing bucket, excavator bucket, swing bucket, trench cleaning bucket, trench bucket, hydraulic dozer bucket -Manufacturer: Lehnhoff, hydraulic leveling bucket, swivel bucket type 902 Lit. -Width: 2000mm -Contents: 0.0790 m³ -Height inside: 700 mm -Depth: 580 mm -Hole: Ø 60/70 mm -Intermediate size mount: 285 mm, dimensions see photos -Transport dimensions: 1980/1335/H580 mm -Weight: 636 kg

backhoe bucket, excavator bucket, trenching bucket, excavator bucket, ejector bucket, ejector bucket -Excavator bucket: hydraulic ejector bucket, heavy duty -Width: 400mm -Height: 830mm -Depth: 1330 mm -Inner mounting width: 240/270 mm -Hole: bore Ø 72/60 mm, dimensions see photos -the holder on the spoon: can be changed by us for an additional charge -Transport dimensions: 1330/400/H1050 mm -Weight: 289 kg

Backhoe bucket, excavator bucket, demolition bucket, trenching bucket, excavator bucket -Excavator bucket: heavy design, very stable -Width: 600mm -Height: 440mm -Depth: 900 mm -Inner mounting width: 200 mm -Hole: bore Ø 40/50 mm, dimensions see photos -teeth -the holder on the spoon: can be changed by us for an additional charge -Transport dimensions: 900/600/H670 mm -Weight: 116 kg

Digging bucket, excavator bucket, demolition bucket -Design: stable -Contents: 175 l -Width: 500 mm -Height: 550 mm -Depth: 1000 mm -Quick-change mount -Carrier device: Hekomat SKL08 -Laceration teeth -The design of the spoon attachment can be changed by us for an additional charge. -Empty weight: 210 kg

Digging bucket, excavator bucket, demolition bucket -Design: stable -Contents: 175 l -Width: 680 mm -Height: 650 mm -Depth: 700 mm -Quick-change mount -Intermediate mounting dimension: 260 mm -Laceration teeth -The design of the spoon attachment can be changed by us for an additional charge. -Empty weight: 230 kg

Digging bucket, excavator bucket, demolition bucket -Design: stable -Width: 570 mm -Height: 450 mm -Depth: 600 mm -Intermediate mounting dimension: 160 mm -Hole spacing: 220 mm -Bore: Ø 45 mm -extended cutting edge -The design of the spoon attachment can be changed by us for an additional charge. -Weight: 130 kg

This lot is unused ; Auction-ID: A1-51150-69

This lot is unused ; Auction-ID: A1-51150-4

This lot is unused ; Auction-ID: A1-51150-6

Digging bucket, excavator bucket, demolition bucket, trenching bucket -Design: stable -Width: 280 mm -Height: 750 mm -Depth: 1000 mm -Intermediate dimension: 290 mm -Hole diameter: Ø 60 mm -Laceration teeth -extended cutting edge -The design of the spoon attachment can be changed by us for an additional charge. -Empty weight: 340 kg

Digging bucket, excavator bucket, demolition bucket, trenching bucket, excavator bucket -Design: stable -Width: 710 mm -Height: 1000 mm -Depth: 1500 mm -Intermediate mounting dimension: 350 mm -Hole diameter: Ø 80 mm -Laceration teeth -extended cutting edge -The design of the spoon attachment can be changed by us for an additional charge. -Empty weight: 700 kg

Digging bucket, excavator bucket, demolition bucket -Width: 600 mm -Height: 600 mm -Depth: 800 mm -Intermediate mounting dimension: 255/200 mm -Bore: Ø 45/50 mm -Laceration teeth -The design of the spoon attachment can be changed by us for an additional charge. -Weight: 160 kg

Digging bucket, excavator bucket, trenching bucket, ditch cleaning bucket -Width: 300 mm -Height: 600 mm -Depth: 800 mm -Intermediate mounting dimension: 255/200 mm -Bore: Ø 45/50 mm -Laceration teeth -extended cutting edge -The design of the spoon attachment can be changed by us for an additional charge. -Weight: 100 kg

Mini excavator bucket, digging bucket, excavator bucket, demolition bucket -Width: 470 mm -Height: 470 mm -Depth: 600 mm -Intermediate mounting dimension: 135 mm -Hole spacing: 110 mm -Bore: Ø 35 mm -Laceration teeth -extended cutting edge -The design of the spoon attachment can be changed by us for an additional charge. -Weight: 80 kg

Digging bucket, excavator bucket, demolition bucket, trenching bucket -Design: stable -Width: 280 mm -Height: 750 mm -Depth: 1100 mm -Intermediate mounting dimension: 165 mm -Hole diameter: Ø 45 mm -Laceration teeth -The design of the spoon attachment can be changed by us for an additional charge. -Empty weight: 150 kg

Mounted with CW10 veracter attachment Auction-ID: A3-46111-31042

This lot is unused ; Auction-ID: A1-51150-3

This lot is unused ; Auction-ID: A1-51150-18

60 cm working width, 92 l volume

LxWxH: 120x40x45 cm