129,377 used machines on RESALE, but how to find them? Machine Search
DIGGING BUCKET 1,500 mm attachment tool, excavator bucket bucket with teeth
LEHNHOFF 2,400 mm Excavator Bucket Trench Swivel Bucket SWA 66 Year 2012
used injection molding tool (mould) for 5,5 bucket with lid (separate mould) height (opening) 54 cm / width 61 cm / length 54 cm
used injection molding tool (mould) for 2 L bucket with lid (separate mould)
NEW, 100 cm width, with Lehnhoff MS03 Symlock mount, 207 kg dead weight, suitable for 4.0 - 5.5 t excavators
Screen bucket / bucket separator ALLU DSB 3-23 The screening bucket is in a good, workshop-tested condition, little run and immediately ready for use. Type: DSB 3-23 15XHD (15 mm) Water volume: 2.3 m³ Earth volume: 2.7 m³ Screening area: 2.3 m² Discs: 215 pieces Dimensions: 269 x 175 x 169 cm (L x W x H) Weight: 3,870 kg Working pressure: 200 - 280 bar Oil consumption: 95 - 235 l/min incl. user manual, spare parts catalogue and declaration of conformity Carrier devices (according to manufacturer): - Excavator operating weight 25 - 35 tons - Loader operating weight 14 - 30 tons The price is net, plus valid VAT. Loading with crane (from above) is included in the price.
Total height: 5100 mm Total length of the lower horizontal part: 3600 mm Total length of the upper horizontal part: 4777 mm Number of entries: 2 Number of intermediate outlets: 1 Chain speed: 19.9 m/min Chain length: 40 m Cup Type: 33 PP Further information can be found in the data sheet.
NEW, 80 cm width, with Martin M03 mount, 125 kg dead weight, suitable for 2.8 - 3.9 t excavators
NEW, 240 cm width, 1.01 m³ capacity, with Manitou attachment, 351 kg dead weight, with 11 teeth
NEW, 140 cm wide, with Martin M10 mount, 123 kg net weight, suitable for 5.6 - 9.0 t excavators
2025 BIG embankment bucket 160cm with OQ45-5 attachment, Technical specifications:, - Weight: 216 kg, - Recording width: 160 cm, - Contents: 279 liters, - CAT 5 - suitable for 5.6 - 9 t excavators
NEW, 80 cm width, with Martin M03 mount, 125 kg dead weight, suitable for 2.8 - 3.9 t excavators
NEW, 140 cm wide, with Martin M10 mount, 123 kg net weight, suitable for 5.6 - 9.0 t excavators
NEW, 120 cm wide, with Lehnhoff MS01 Symlock mount, 73 kg net weight, suitable for 1.9 - 2.7 t excavators
Used slope bucket / ditch cleaning bucket, Working width: 100cm, with Lehnhoff MS01 recording
Ground tray for Striegel wheel loader 86 cm. width Striegel coupling Auction-ID: A1-40132-255
The excavator bucket is in good condition. Auction-ID: A3-43507-34083
Material: Stainless steel Built: 1993 Content: 1770 ltr Pressure inside: 0.5bar Pressure outside: 10bar Weight: 5000 kg L x W x H: 4700mm/900mm/1200mm An indirect heat exchanger with mechanical material transport. Very good condition. YOU ARE A NEW, OUTDATED AND USED
used
Manufacturer PWH Flow capacity 400 m3 hour of bulk material Grit 0 to 30 mm Bulk weight 0.84 to 0.90 to / m3 Water content 18% Heap height 12 meters Operating voltage 380 V Control voltage 220 V Bucket capacity: 100 litres • Number of shovels: 8 pieces • Bulk per minute: 60 • Theoretical power: 360 m3/h • Effective power: 280 m3/h • Bucket wheel diameter: 3.45 m • Circumferential force (wheel): 15,000 N • Cutting speed on the knife: 1.35 m/sec • Removal height (heap height): 12 m • Discharge of the lowered wheel: 11 m • Lifting height on the paddle wheel: 6 m • Lifting speed on the paddle wheel: approx. 3 m/min • Senovice speed on the paddle wheel: approx. 3m/min • Swivel speed: approx. 12 m/min • Angle of rotation of the trolley (suspension): 360 • Angle of rotation of the trolley
Inclined lift with motorized winch (7.5 kW / 36 UPM), lifting bucket (1,000 l. usable volume), weighing frame / foot station (2,000 kg max.), 25 m rope and head station for material transfer. Rope and SEW winch drive are new; Elevator was used to feed an Eirich intensive mixer type R(V) 18. Technical documentation is available.
MATEC Stappler tipping bucket type 2 The tipping bucket can be locked with a bolt with cotter pin so no tipping is possible. The tipping buckets can be supplied also with a hydraulic tilting device. The blades are 1950 mm wide and type 2 1300 mm deep. The standard blade height is 450 mm. Solid wall or lattice towers can be ordered as accessories. The nominal weight of the shovel is 2000 kg. Each blade has 4 lifting eyes for crane handling. 4 mm thickness, corners and a replaceable wear bar reinforced permit prospecting. Other blade dimensions are possible upon request. Year 2017 New machine Spare parts/service MATEC CH-4952 Eriswil/DE-79618 Rheinfelden Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 ...
tilting recess, chip recess, Chip wagons, Forklift trly, Scrap bucket Dimensions: Width x Length x Height (approx. 74 x 73 x 135 cm) Total height: approx. 94 cm 4 wheels handle rocker arm Outlet tap Portable with forklift As shown, it is sold with various sheet steel boxes. All information without guarantee
small tipping container, width 63.5, height 98.5, length 125.0 cm for forklifts with fork width 11.5 cm
hydraulic tipping tank or tipping bucket Price: 800,-p.pcs. + VAT reclaimable: R928 hydraulic tipping trailer, tipping wagon MAFI hydraulically tiltable by means of a manual hydraulic pump. Load capacity 2000 kg Overall height 2000mm Inner body dimension Br.1900mm Flat 900mm top 1450mm 2 pieces are to be handed in Because they have been stored for years, they are partly rusty or the paint is peeling off. Otherwise very good technical. Condition in my opinion see also photo of the cylinders easily convertible as a tipping container on a forklift (has been done before) unscrew the chassis weld on 2square tubes for fork mounting Unscrew the manual hydraulic pump with quick couplings and adapt it to forklift hydraulics It is best to visit and try it out for yourself. I had several at one of them the chassis was removed and the holder for forklifts was welded on, intended for wo ...
tilting recess, chip recess, Chip wagons, Forklift trly, Scrap bucket Dimensions: Width x Length x Height (approx. 74 x 73 x 135 cm) Total height: approx. 94 cm 4 wheels handle rocker arm Outlet tap Portable with forklift As shown, it is sold with various sheet steel boxes. All information without guarantee
Langguth V 81 Bucket Destapler,Destapler for unpalpping buckets Bucket size from 2.5 - 20 l automatic handle alignment Very good condition, directly from production!
tilting recess, chip recess, Chip wagons, Forklift trly, Scrap bucket Dimensions: Width x Length x Height (approx. 74 x 73 x 135 cm) Total height: approx. 94 cm 4 wheels handle rocker arm Outlet tap Portable with forklift As shown, it is sold with various sheet steel boxes. All information without guarantee
Filling is established with a 2¨flow meter - FLOW 33 accuracy 0,5% 1.2 The machine is built with ΙΝΟΧ ASI304 1.3 The machine will come with a full closed cabin for hygiene 1.4 Closure of bucket with film per kg & UV lamp 1.5 Automatic conveying per kg 1.6 Automatic over cap Applicator for 2,5 & 5 kg 1.7 System for CIP connection 1.8 Control panel with touchscreen Siemens IP65 and PLC Siemens, immediate choose of kg .The change over is immediate and needs no handling 1.9 Capacity 4,5t/hour on 5kg 1.10 ΗΕΡΑ filter in cabin 1.11 Stainless steel lobe pump OMAC Type : ΒΕ 220 Machine dimensions: Length : 5 meters Width : 1 meter Height : 230 meters
tilting recess, chip recess, Chip wagons, Forklift trly, Scrap bucket Dimensions: Width x length x height (approx. 74 x 73 x 135 cm) with sheet metal wall attachment approx. 30 cm, three sides Total height: approx. 94 cm 4 wheels handle rocker arm Outlet tap Portable with forklift Sold as shown with sheet steel cabinet. All information without guarantee
tilting recess, chip recess, Chip wagons, Forklift trly, Scrap bucket Dimensions: width x length x height (approx. 94 x 76 x140 cm) Total height: approx. 118 cm 4 wheels handle rocker arm Outlet tap Portable with forklift Sold as shown with various sheet steel boxes. All information without guarantee
Kemper bucket elevator for bread plant Type: BE 11 Possible applications in all dough processing lines transport also of soft doughs Space-saving design optionally 1 or 2 pieces of dough Run-off belt Dimensions: Height: 216cm Width: 71cm Depth: 120cm
Kemper bucket elevator for bread plant Type: BE 11 Possible applications in all dough processing lines transport also of soft doughs Space-saving design optionally 1 or 2 pieces of dough Transverse belt left-hand / Cross-band right-hand with scales
sell well serviced screen bucket Terra ST
Screen bucket 355mm unused Manufacturer Haener Model HSL280 MS03 ECO S355 Type screen bucket with quick-release frame MS03 Type Skeleton Excavator Bucket (Unused) Capacity 140 litres Weight 86kg
DTB Bucket elevator washing conveyor Stainless, bucket elevator conveyor, site inside a 500L stainless tank with recirculation pump, previously used for washing olives, elevates to 1800,, belt width 250mm, overall length of system 2700mm, two in stock, 3Ph
A complete packaging and palletizing line for buckets is available. 1) Vollenda 2VNES2-6-E bucket filling machine, year of manufacture: 2009, bucket formats: 2kg-5kg, filling capacity 2kg/5kg: 1200/800 buckets/h. 2) Palletizer Ehcolo EPL 160, year of manufacture: 2009, empty pallet magazine positions: 15, max. pallet dimensions X/Y/Z: 800mm/1200mm/1500mm, palletizing capacity 2kg/5kg pails: 800/1200 pails/h. 3) Wrapping machine Robopac Rotoplat 3000HD, year of construction: 2009, max. rotation speed: 12 rpm, max. wrapping height: 2400mm, power: 11kW, weight: approx. 1400kg. Documentation available. On-site inspection is possible.
maximum number of results exceeded
please refine your search
150 € 
