bucket elevator used for sale

Forklift slots; 5890 Auction-ID: A1-51257-526

New Mikron Hidrolik MHK-E120 Clamshell Bucket Excavator Bucket 120 cm from the year of manufacture 2024. Auction-ID: A3-46114-4610

New Mikron Hidrolik MHK-E120 Clamshell Bucket Excavator Bucket 120 cm from the year of manufacture 2024. Auction-ID: A3-46114-4611

Dimensions LxWxH: 60x40x40 cm,

Recording width 80 cm, recording width 26 cm, bolt 9 cm, height 190 cm, depth 215 cm

NEW, 2,40 m working width, 2.0 m³ capacity, 658 kg weight, suitable for Bobcat telescopic handler attachment

Hydraulic quick coupler CV30/40 Tilting piece Auction-ID: A3-46114-19477

NEW, 300 cm working width, approx. 2.20 m³ capacity, 800 kg weight, with JCB Q fit attachment

ID3710 O&K SRB100 year/Year of construction ca. 1982 55 t Bucket wheel excavator, overhauled with a new bucket wheel and new excavator buckets in 2013. Worked for only a few hours after the overhaul, some of the excavator buckets are now missing.,Bucket volume 100 Liter, Conveyor width 800 mm, theor. Output 500 cbm/h, Electric power installed 190 KW, Bucket wheel diameter 4000 mm, Bucket wheel drive power 75 KW, Length of bucket wheel boom 6000 mm, Length of discharge boom 10.000 mm Bucket wheel excavator, overhaul and new bucket wheel and new excavator buckets in 2013. Only a few hours after overhaul, some of the excavator buckets are now missing. Bucket volume 100 litres, conveying width 800 mm, theoretical flow rate 500 m³/h, installed electrical power 190 kW, bucket wheel diameter 4000 mm, bucket wheel drive power 75 kW, bucket wheel boom length 6000 mm, boom length 10,000 mm

Atlas E32 Working well No leaks CW30 Quick Connector Auction-ID: A3-46114-19473

KITZINGER contino 250BS1 bucket washing system, still in original packaging, System structure:, 1. 2000mm inlet table, wash material transport via scan belt chain with cams every 500mm, fixed pass-through height 400mm height (hold-down device adjustable with M6 threaded rods), bottom partially open with space for 1 E2 container as dirt trap, horizontal pass-through opening downwards, self-draining bucket bottom, 2. Washing 1000mm long, tank 400l with large outer filter housing, EDUR stainless steel circulation pump 4kW 1500l/min at 1.5bar, heating 20kW steam directly with Spirax Sarco mixing nozzle, 3. Rinse with fresh water, hourly requirement 300-400l (adjustable), length 800mm, including steam countercurrent, Inlet table 2000 mm Washing 1000 mm Rinsing 800 mm Neutral area 500 mm Blow-off 1800 mm Outlet 2000 mm Total length 8100 mm, KITZINGER contino 250BS1 bucket washing system, pump  ...

Shovel Aluminium ALU Weigh Bucket Flour Shovel 290 mm( 2 pieces )Aluminium die-cast polishedTotal length approx. 290 mm375mlWeight approx. 184 gATTENTION: Aluminium is not dishwasher safe! Details see picture

Shovel Aluminium ALU Weigh-in Bucket Flour Shovel 265 mm ( 2 pieces )Die-cast aluminium polishedTotal length approx. 265 mm285mlWeight approx. 120 gATTENTION: Aluminium is not dishwasher safe! Details see picture

Shovel Aluminium ALU Weigh scoop Flour scoop 250 mm ( 2 pieces )Die-cast aluminium polishedTotal length approx. 250 mm250mlWeight approx. 98 gATTENTION: Aluminium is not dishwasher safe! Details see picture

Digging bucket, excavator bucket, demolition bucket, trenching bucket -Design: stable -Width: 420 mm -Height: 1010 mm -Depth: 1370 mm -Intermediate mounting dimension: 275 mm -Hole diameter: Ø 60 mm -Laceration teeth -The attachment to the spoon: can be changed by us for an additional charge. -Empty weight: 360 kg

Digging bucket, excavator bucket, demolition bucket, trenching bucket -Design: stable -Width: 500 mm -Height: 900 mm -Depth: 1100 mm -Intermediate mounting dimension: 185 mm -Hole diameter: Ø 50 mm -teeth of tearing -The design of the spoon attachment can be changed by us for an additional charge. -Empty weight: 190 kg

Backhoe bucket, excavator bucket, demolition bucket, trenching bucket -Execution: very stable -Width: 850 mm -Height: 1060 mm -Depth. 1600 mm -Zeppelin quick change adapter NADO -ripping teeth -Number: 2x excavator buckets available -Price: per piece -The mounting on the spoon can be changed by us at an additional cost -Dimensions: 850/1600/H1060 mm -Own weight: 600 kg

Digging bucket, excavator bucket, demolition bucket, trenching bucket, excavator bucket -Excavator bucket: heavy-duty, very stable -Width: 1220 mm -Height: 950 mm -Depth: 1380 mm -Photograph: Atlas 1704, dimensions see photos -teeth of tearing -Load hook -The attachment to the spoon: can be changed by us for an additional charge. -Empty weight: 814 kg

Backhoe bucket, excavator bucket, demolition bucket, trenching bucket, excavator bucket -Excavator bucket: heavy design, very stable -Width: 410mm -Height: 630mm -Depth: 1050 mm -Hole: bore Ø 45 / 52 mm, dimensions see photos -teeth -the holder on the spoon: can be changed by us for an additional charge -Transport dimensions: 1050/410/H710 mm -Weight: 116 kg with pallet

Side tipping bucket, wheel loader bucket, earth shovel -Manufacturer: Kramer, wheel loader shovel, wheel loader shovel, heavy duty, very stable -Bucket width: 1650 mm -Inner mounting width: 865 mm -Hole: bore Ø 40 / 50 mm, dimensions see photos -Holders: for ripper teeth -Dimensions: 760/1650/H770 mm -Weight: 240kg -Own weight: 480 kg

Digging bucket, excavator bucket, demolition bucket, trenching bucket, excavator bucket, ditch cleaning bucket -Manufacturer: KFL, excavator bucket, digging bucket type T185 -Width: 880 mm -Height: 775 mm -Depth: 960 mm -Internal width of opening: 280 mm -Mount: Bore Ø 60 mm, dimensions see photos -The attachment to the spoon: can be changed by us for an additional charge. -Transport dimensions: 960/880/H830 mm -Weight: 228 kg

Swing bucket, excavator bucket, swing bucket, trench cleaning bucket, trench bucket, hydraulic dozer bucket -Manufacturer: Lehnhoff, hydraulic leveling bucket, swivel bucket type 902 Lit. -Width: 2000mm -Contents: 0.0790 m³ -Height inside: 700 mm -Depth: 580 mm -Hole: Ø 60/70 mm -Intermediate size mount: 285 mm, dimensions see photos -Transport dimensions: 1980/1335/H580 mm -Weight: 636 kg

backhoe bucket, excavator bucket, trenching bucket, excavator bucket, ejector bucket, ejector bucket -Excavator bucket: hydraulic ejector bucket, heavy duty -Width: 400mm -Height: 830mm -Depth: 1330 mm -Inner mounting width: 240/270 mm -Hole: bore Ø 72/60 mm, dimensions see photos -the holder on the spoon: can be changed by us for an additional charge -Transport dimensions: 1330/400/H1050 mm -Weight: 289 kg

Backhoe bucket, excavator bucket, demolition bucket, trenching bucket, excavator bucket -Excavator bucket: heavy design, very stable -Width: 600mm -Height: 440mm -Depth: 900 mm -Inner mounting width: 200 mm -Hole: bore Ø 40/50 mm, dimensions see photos -teeth -the holder on the spoon: can be changed by us for an additional charge -Transport dimensions: 900/600/H670 mm -Weight: 116 kg

Digging bucket, excavator bucket, demolition bucket -Design: stable -Contents: 175 l -Width: 500 mm -Height: 550 mm -Depth: 1000 mm -Quick-change mount -Carrier device: Hekomat SKL08 -Laceration teeth -The design of the spoon attachment can be changed by us for an additional charge. -Empty weight: 210 kg

Digging bucket, excavator bucket, demolition bucket -Design: stable -Contents: 175 l -Width: 680 mm -Height: 650 mm -Depth: 700 mm -Quick-change mount -Intermediate mounting dimension: 260 mm -Laceration teeth -The design of the spoon attachment can be changed by us for an additional charge. -Empty weight: 230 kg

Digging bucket, excavator bucket, demolition bucket -Design: stable -Width: 570 mm -Height: 450 mm -Depth: 600 mm -Intermediate mounting dimension: 160 mm -Hole spacing: 220 mm -Bore: Ø 45 mm -extended cutting edge -The design of the spoon attachment can be changed by us for an additional charge. -Weight: 130 kg

Digging bucket, excavator bucket, demolition bucket, trenching bucket -Design: stable -Width: 280 mm -Height: 750 mm -Depth: 1000 mm -Intermediate dimension: 290 mm -Hole diameter: Ø 60 mm -Laceration teeth -extended cutting edge -The design of the spoon attachment can be changed by us for an additional charge. -Empty weight: 340 kg

Digging bucket, excavator bucket, demolition bucket, trenching bucket, excavator bucket -Design: stable -Width: 710 mm -Height: 1000 mm -Depth: 1500 mm -Intermediate mounting dimension: 350 mm -Hole diameter: Ø 80 mm -Laceration teeth -extended cutting edge -The design of the spoon attachment can be changed by us for an additional charge. -Empty weight: 700 kg

Digging bucket, excavator bucket, demolition bucket -Width: 600 mm -Height: 600 mm -Depth: 800 mm -Intermediate mounting dimension: 255/200 mm -Bore: Ø 45/50 mm -Laceration teeth -The design of the spoon attachment can be changed by us for an additional charge. -Weight: 160 kg

Digging bucket, excavator bucket, trenching bucket, ditch cleaning bucket -Width: 300 mm -Height: 600 mm -Depth: 800 mm -Intermediate mounting dimension: 255/200 mm -Bore: Ø 45/50 mm -Laceration teeth -extended cutting edge -The design of the spoon attachment can be changed by us for an additional charge. -Weight: 100 kg

Mini excavator bucket, digging bucket, excavator bucket, demolition bucket -Width: 470 mm -Height: 470 mm -Depth: 600 mm -Intermediate mounting dimension: 135 mm -Hole spacing: 110 mm -Bore: Ø 35 mm -Laceration teeth -extended cutting edge -The design of the spoon attachment can be changed by us for an additional charge. -Weight: 80 kg

Digging bucket, excavator bucket, demolition bucket, trenching bucket -Design: stable -Width: 280 mm -Height: 750 mm -Depth: 1100 mm -Intermediate mounting dimension: 165 mm -Hole diameter: Ø 45 mm -Laceration teeth -The design of the spoon attachment can be changed by us for an additional charge. -Empty weight: 150 kg

60 cm working width, 92 l volume

LxWxH: 120x40x45 cm

System for filling yoghurt and quark into round plastic buckets of various sizes and for labelling them with self-adhesive shrink labels. The system consists of a separate filling/capping unit and a labeller. Filler/capper: The plastic buckets are placed onto the conveyor belt from the stack of buckets in the bucket magazine. The buckets are sterilised with hydrogen peroxide and steam via a heating cartridge prior to filling, and the lids are sterilised prior to sealing. The product is filled into the buckets using a calibratable load cell until a specified weight is reached. The sealer places lids from the lid magazine onto the buckets and presses them firmly into place. Labeller: Continuous labelling machine for self-adhesive sleeve labels. Suitable for various bucket sizes with a capacity of 1–5 kg., Capacity filler/capper appr.: 450 units/h Based on a 6-litre bucket; depends on con ...

Filling and capping machine for filling plastic buckets of various sizes with yoghurt and quark. The plastic buckets are placed onto the conveyor belt from the stack of buckets in the bucket magazine. The buckets are sterilised with hydrogen peroxide and steam using a heating cartridge prior to filling, and the lids are sterilised prior to sealing. The product is filled into the buckets using a calibratable load cell until a specified weight is reached. The sealer places lids from the lid magazine onto the buckets and presses them firmly into place., Additional title: weight-based filling, Capacity appr.: 450 units/h based on a 6.1-litre bucket; depending on container size and product viscosity, Power: 11 kW, Voltage: 400 V, Frequency: 50 Hz, Heating / Cooling: steam 3 bar; 10 kg/h, Compressed air: 6-8 bar; Qmax = 300 l/min, Length: 3708 mm, Width: 968 mm, Height: 2442 mm, Formats: 1.3-l ...

A Dudik bucket conveyor system with trolley is available. Trolley: Dudik RK2250, Travel drive: Bockwoldt/SEW FR 285 III, Conductor rail: Vahle MKHS, Bucket volume: 2250l. The mechanical drive was renewed in 2013. Documentation available. An on-site inspection is possible. Expected to be available from January 2027.

Bucket fillers for yoghurt are specialized machines used in the dairy industry to fill containers or buckets with yoghurt product efficiently and accurately. Here are some key points about them:, - Types: There are various types of bucket fillers, including gravity fillers, volumetric fillers, and piston fillers. The choice depends on the viscosity and type of yoghurt., - Automation: Many bucket fillers are semi-automated or fully automated, which helps in improving the speed and accuracy of the filling process., - Hygienic Design: Since they deal with food products, these machines are designed to comply with health and safety regulations, ensuring easy cleaning and maintenance., - Adjustability: Some bucket fillers allow for adjustable filling volumes, making it easier to fill different sizes of buckets with varying quantities of yoghurt., New Tub Fillers By for 1 kg up to 10kg buckets  ...

SIGMA 11222 oscillating rotor with 2 rectangular buckets 13222; ; Max. plate height: 56 mm; Max. speed (3-18KS / 3-18KHS): 3,000 rpm; Max. FCR (3-18KS / 3-18KHS): 1.218 x g; Max. load per stand: 337 g; Tmin at max. speed: <4°C; Angle: 90°; ; Internal reference: FA-1430; Auction-ID: A1-50994-1036

- Capacity 6t. - A control panel screen is missing. - This equipment was part of the production line associated with the DISA DISAMATIC D3-Z-555 DMS molding machine, available separately under batch number A7-50548-2. - Operating conditions of this machine: unchecked. - EX WORKS sale. Disassembly, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-50548-4

4 x 1x50ml adapters for SIGMA 13104 / 13117 nacelles/buckets; ; For SIGMA laboratory centrifuge with rotor 11133; For 4 x 1 x 50ml Falcon tube; ; Internal reference: FA-1428; Auction-ID: A1-50994-1070

Lot consisting of JPC excavator attachments (except HT25), never used: - hydraulic breaker - 200 mm bucket - 800 mm bucket Ø25 mm connection Overall dimensions: 1200 x 800 x 500 mm Weight: 100 kg Auction-ID: A7-50798-388

Universal kit for mini excavator with 25mm pin, consisting of hammer, 200 mm bucket and 800 mm bucket, never used Overall dimensions: 1200 x 800 x 500 mm Weight: 150 kg Auction-ID: A7-50801-29

Concrete mixing bucket, 250 litres, standard connection, pressure 215 bar, flow rate 90 lt/min automatic material discharge, never used Overall dimensions: 1500 x 900 x 700 mm Weight: 370 kg Auction-ID: A7-50798-248

Lot consisting of 200 mm bucket, 800 mm bucket and quick coupler for excavators, Ø25 mm coupler, never used Overall dimensions: 800 x 400 x 400 mm Weight: 20 kg Auction-ID: A7-50801-6

200 mm bucket for excavators (except HT25), never used Overall dimensions: 200 x 300 x 300 mm Weight: 10 kg Auction-ID: A7-50799-419

HT 18 mini-excavator, equipped with 3-cylinder KUBOTA D722 diesel engine, self-braking recessed track engines, protective cage and reinforced frame, joystick and electric controls, equipped with extendable undercarriage, boom swing, hydraulic system for hammer, with 200mm bucket and 800mm bucket never used, 0 hours The color of the excavator may vary according to availability (yellow, red, other) Overall dimensions: 2700 x 1100 x 2600 mm Weight: 1650 kg Auction-ID: A7-50801-1

800 mm bucket for excavators (except HT25 mm), Ø25 mm coupler, never used Overall dimensions: 800 x 400 x 400 mm Weight: 20 kg Auction-ID: A7-50799-423

Concrete mixing bucket, 250 litres, standard connection, pressure 215 bar, flow rate 90 lt/min, automatic material discharge Overall dimensions: 1500 x 900 x 700 mm Weight: 370 kg Auction-ID: A7-50799-140