bucket elevator used for sale

DIGGING BUCKET 1,500 mm attachment tool, excavator bucket bucket with teeth

LEHNHOFF 2,400 mm Excavator Bucket Trench Swivel Bucket SWA 66 Year 2012

used injection molding tool (mould) for 5,5 bucket with lid (separate mould) height (opening) 54 cm / width 61 cm / length 54 cm

used injection molding tool (mould) for 2 L bucket with lid (separate mould)

tower silos 4 x 50 m³ / 50000 litres of polyester tanks / Tower silos / flour silos, GRP silos, grain silo / hopper silo / compound feed component silo Top condition Content per silo: 50 m³ / 50000 litres piece / pc: 4 pieces Year of construction: 1994 mass of Tower silos without steel: approx. Ø 2,80 x 12 m high Height of the entire system: 21 m Density/weight: 1,200 kg per m³ approval number: Z 10-22-42 Manufacturer: Polem More details: the silos are in good used condition. According to the age traces are present. The system has complete works until its closure. The system could not be tested yet, because there is no power supply. It is a complete meal silo plant with very thick-walled 4 x 50 m³ GRP silos with a density/weight 1200 kg per m³ is each silo separately to fill up the tanks through several cross conveyor (scraper conveyors). The silo is a spray head to cle ...

Alan Ruddock Grain Elevator Malt Intake Hopper - approx. 100kg capacity Inclusive of a manually operated slide Non-standard finish (metallic bronze 56) Grist Elevator - 2.5 m o/a height. As shown in drawing. Inclusive of polypropylene buckets, stretch resistant belting, and a three-phase geared motor. This is a SECOND HAND item and is sold as seen. For more information and more available stock please visit us at - advancedbrewing.co.uk

Used Used Caps Elevator 3.000 bph Marmoinox 2016: Year: 2016 Condition: Good Used Caps Elevator 3.000 bph Marmoinox 2016: Model: alm-zve1 Year: 2016 Speed: 3.000 BPH Type of workable cap: Plastic pre-threaded cap Type: pneumatic Measurements-overall dimensions of machinery: 2100 mm x 750 mm x 3000 mm (h) Safety protections Code: I 78 More details: https://bottlingscout.com

Type: Ruhle SR2 with Elevator Loading sections (L x W x H): 500x120x200 mm Cutting length: 1,0 – 30,0 mm Saw blades 1 set Capacity: up to 1800 kg/hour Electric power: 3.5 kW Machine dimension in cm: Width: 70 cm Lenght: 180 cm Height: 125 cm Delivery time: 10 working days after advanced payment

Type: Holac VA 90 Loading sections (L x W x H): 400x100x80 mm Cutting length: 1,0 – 30,0 mm Saw blades 3 set, 4x4 mm, 10x10 mm, 18x18 mm Capacity: up to 2500 kg/hour Electric power: 8.0 kW Machine dimension in cm: Width: 180 cm Lenght: 90 cm Height: 225 cm Delivery time: 10 working days after advanced payment

5 elevators galvanized or painted, length from 8 to 24 meters, capacity 80 t/h to 200 t/h Tel. 01715213204

was in action behind a 2019 FOSS Inline Fat Analysis System Meat Master(TM) II,, for raw meat,, designed to be mobile,, effective width: 400 mm,, feeding distance: 820 mm,, gradient: approx. 60° - length: approx. 3,800 mm,, Delivery height: approx. 2,500 mm,, Delivery distance: approx. 930 mm,, Lug width: 400mm, Stud height: 50mm, Cleat pitch: approx. 200mm, Hygienic version with central scaffold tube. The construction is very open. The belt is removed using round material. Drive and deflection stations are designed with sheet metal parts. In the lower run the, Belt worn by rollers. The conveyor is equipped with a quick clamping system. Thus, the belt can be lifted for cleaning or removed from the side. The belt is positively driven and, also forced, Support:, with rectangular tube support frame with castors, Product Tours:, Plastic profiles swiveling on both sides, Clear width = stud w ...

For the height conveying of closures

Total height: 5100 mm Total length of the lower horizontal part: 3600 mm Total length of the upper horizontal part: 4777 mm Number of entries: 2 Number of intermediate outlets: 1 Chain speed: 19.9 m/min Chain length: 40 m Cup Type: 33 PP Further information can be found in the data sheet.

NEW, 100 cm width, with Lehnhoff MS03 Symlock mount, 207 kg dead weight, suitable for 4.0 - 5.5 t excavators

Hydr. Ditch cleaning bucket HHG1100-Morin-M0 1000mm Excavator class: 1.2-2.3 ton Working width: 1000mm Opening width: 292mm Depth: 389mm Recording: Morin M0 Weight: 90 kg Volume (SAE) : 74 L Base body made of (S355J2+N) HB400 12x110 cutting edge Back cutting edge 1 cylinder swivel angle 2x45° Cylinder protection Load Holding Valve Hydraulic connections 10L Backhoe Bucket HTL120-Morin-M0 200 mm Excavator class: 1.5-2.3 ton Working width: 200mm Opening width: 339mm Depth: 463mm Recording: Morin M0 Weight: 24 kg Volume: (SAE) 20 L Base body made of (S355J2+N) HB400 12x110 cutting edge Number of teeth: 2 screwed Backhoe Bucket HTL140-Morin-M0 400 mm Excavator class: 1.2-2.3 ton Working width: 400mm Opening width: 339mm Depth: 463mm Recording: Morin M0 Weight: 32 kg Volume: (SAE) 46 L Base body made of (S355J2+N) HB400 12x110 cutting edge Number of tee ...

Excavator class: 1.2-2.3 ton Working width: 1000mm Opening width: 292mm Depth: 389mm Pick-up: MS01 Weight: 87 kg Volume (SAE): 74 L Base body made of (S355J2+N) Cutting edge made of HB400 12x110 Back blade 1 cylinder Swivel angle 2x45° Cylinder protection Load holding valve Hydraulic connections 10L optionally available: Throttle screw - allows exact adjustment of the bucket travel speed and thus a more precise positioning of the bucket Backhoe bucket HTL120MS-01-SYM 200 mm ECO Excavator class: 1.2-2.3 Ton Working width: 200mm Opening width: 339mm Depth: 463mm Pick-up: MS01 Weight: 26 kg Volume: (SAE) 20 L Base body made of (S355J2+N) Cutting edge made of HB400 12x110 Number of teeth: 2 screwed Backhoe bucket HTL140MS-01-SYM 400 mm-ECO Excavator class: 1.5-2.3 Ton Working width: 400mm Opening width: 339mm Depth: 463mm Pick-up: MS01 Weight: 35 kg Volume: (SAE) 46 L Base body made of (S35 ...

Hydr. Ditch cleaning bucket HHG1100-Morin-M0 1000mm Excavator class: 1.2-2.3 ton Working width: 1000mm Opening width: 292mm Depth: 389mm Recording: Morin M0 Weight: 90 kg Volume (SAE) : 74 L Base body made of (S355J2+N) HB400 12x110 cutting edge Back cutting edge 1 cylinder swivel angle 2x45° Cylinder protection Load Holding Valve Hydraulic connections 10L Backhoe Bucket HTL125-Morin-M0 250 mm Excavator class: 1.5-2.3 ton Working width: 250mm Opening width: 339mm Depth: 463mm Recording: Morin M0 Weight: 25 kg Volume: (SAE) 27 L Base body made of (S355J2+N) HB400 12x110 cutting edge Number of teeth: 2 screwed Backhoe Bucket HTL160-Morin-M0 600 mm Excavator class: 1.2-2.3 ton Working width: 600mm Opening width: 339mm Depth: 463mm Recording: Morin M0 Weight: 37 kg Volume: (SAE) 72 L Base body made of (S355J2+N) HB400 12x110 cutting edge Number of tee ...

Hydr. Ditch Cleaning Bucket HHG1100MS-BSYM-01 1000mm Excavator class: 1.2-1.9 ton Working width: 1000mm Opening width: 258mm Depth: 350mm Recording: MS01 (Symlock) Weight: 94 kg Volume (SAE) : 67 L Base body made of (S355J2+N) HB400 12x110 cutting edge Back blade made of HB400 12x110 Taper to the rear 2° 1 cylinder swivel angle 2x45° Load Holding Valve Hydraulic connections 10L Backhoe bucket HTL125MS-BSYM-01 250 mm Excavator class: 1.2-1.9 ton Working width: 250mm Opening width: 389mm Depth: 456mm Recording: MS01 Weight: 35 kg Volume: (SAE) 22 L Base body made of (S355J2+N) HB400 16x110 cutting edge Taper to the rear 3° Number of teeth: 2 screwed Backhoe Bucket HTL160MS-BSYM-01 600 mm Excavator class: 1.2-1.9 ton Working width: 600mm Opening width: 389mm Depth: 455mm Recording: MS01 Weight: 39 kg Volume: (SAE) 72 L Base body made of (S355J2+N) HB ...

Hydr. Ditch Cleaning Bucket HHG1100MS-BSYM-01 1000mm Excavator class: 1.2-1.9 ton Working width: 1000mm Opening width: 258mm Depth: 350mm Recording: MS01 (Symlock) Weight: 94 kg Volume (SAE) : 67 L Base body made of (S355J2+N) HB400 12x110 cutting edge Back blade made of HB400 12x110 Taper to the rear 2° 1 cylinder swivel angle 2x45° Load Holding Valve Hydraulic connections 10L Backhoe Bucket HTL130MS-BSYM-01 300 mm Excavator class: 1.2-1.9 ton Working width: 300mm Opening width: 389mm Depth: 456mm Recording: MS01 Weight: 31 kg Volume: (SAE) 33 L Base body made of (S355J2+N) HB400 16x110 cutting edge Taper to the rear 3° Number of teeth: 2 screwed Backhoe Bucket HTL160MS-BSYM-01 600 mm Excavator class: 1.2-1.9 ton Working width: 600mm Opening width: 389mm Depth: 455mm Recording: MS01 Weight: 39 kg Volume: (SAE) 72 L Base body made of (S355J2+N) HB ...

Kemper bucket elevator for bread plant Type: BE 11 Possible applications in all dough processing lines transport also of soft doughs Space-saving design optionally 1 or 2 pieces of dough Run-off belt Dimensions: Height: 216cm Width: 71cm Depth: 120cm

Kemper bucket elevator for bread plant Type: BE 11 Possible applications in all dough processing lines transport also of soft doughs Space-saving design optionally 1 or 2 pieces of dough Transverse belt left-hand / Cross-band right-hand with scales

DTB Bucket elevator washing conveyor Stainless, bucket elevator conveyor, site inside a 500L stainless tank with recirculation pump, previously used for washing olives, elevates to 1800,, belt width 250mm, overall length of system 2700mm, two in stock, 3Ph

Angled bucket elevator with a bucket size of 0.5 l. per bucket, drive via geared motor 1.5 kW, conveying capacity: +/- 10 m³/h (depending on material, manufacturer's specs), horizontal conveying path (middle inlet to middle ejection): approx. 5.3 m, inlet height: approx. 0.7 m, discharge height: approx. 3.2 m. The rubber belts were not cut during disassembly.

Foot: 900 mm Vertical: 4980 mm Head: 2770 mm Belt speed: 0.47 m/s Flow rate: 10.0 cbm/h Bulk density: 0.18-0.25 t/cbm Engine power: 0.55 kW Speed range: 136 rpm Chain drive: 5/8" Chain Pulley Motor: Z = 15 Sprocket B. movement: Z = 38 Shaft design: sheet steel 3+4mm Removable side plates in the base Further measurements can be found in the attached plan.

Z-shaped angle bucket elevator with a bucket size of 0.5 l. per bucket, drive via geared motor on the head side, conveying capacity: +/- 10 m³/h (depending on material, manufacturer's specs), equipped with optional chassis for semi-mobile use. Horizontal conveying path (middle inlet to middle of ejection): Approx. 2.2 m, Inlet height: Approx. 0.75 m (incl. rollers), Discharge height: Approx. 2.5 m (incl. rollers).

4 different sizes, from stock. Details on the photos. Manufacturer: INTERNOVI Type: PB350 Year of manufacture: 2014 Capacity: 12 m3 Goblet: 350mm - 7.4 liters One with discharge. Explosion-proof, stainless, low noise level. The price refers to 1 complete equipment. Current status: ready for delivery. The equipment is modular. It can also be used and assembled in other ways. Its dimensions can be changed, tailored to the task.

Screen bucket / bucket separator ALLU DSB 3-23 The screening bucket is in a good, workshop-tested condition, little run and immediately ready for use. Type: DSB 3-23 15XHD (15 mm) Water volume: 2.3 m³ Earth volume: 2.7 m³ Screening area: 2.3 m² Discs: 215 pieces Dimensions: 269 x 175 x 169 cm (L x W x H) Weight: 3,870 kg Working pressure: 200 - 280 bar Oil consumption: 95 - 235 l/min incl. user manual, spare parts catalogue and declaration of conformity Carrier devices (according to manufacturer): - Excavator operating weight 25 - 35 tons - Loader operating weight 14 - 30 tons The price is net, plus valid VAT. Loading with crane (from above) is included in the price.

NEW, 80 cm width, with Martin M03 mount, 125 kg dead weight, suitable for 2.8 - 3.9 t excavators

NEW, 240 cm width, 1.01 m³ capacity, with Manitou attachment, 351 kg dead weight, with 11 teeth

NEW, 140 cm wide, with Martin M10 mount, 123 kg net weight, suitable for 5.6 - 9.0 t excavators

NEW, 80 cm width, with Martin M03 mount, 125 kg dead weight, suitable for 2.8 - 3.9 t excavators

NEW, 140 cm wide, with Martin M10 mount, 123 kg net weight, suitable for 5.6 - 9.0 t excavators

NEW, 120 cm wide, with Lehnhoff MS01 Symlock mount, 73 kg net weight, suitable for 1.9 - 2.7 t excavators

Used slope bucket / ditch cleaning bucket, Working width: 100cm, with Lehnhoff MS01 recording

SML heavy-duty dump bucket 240cm with JCB Q-Fit mounting, - Net weight: approx. 443 kg, - Volume: 1.56 m3

Equipped with: Bucket 2400mm, equipped with Euro connection, depth bucket 700mm, height bucket 700mm, Auction-ID: A1-40139-231

Size max 1.120 x 1.620 mm Lifting height max 1.040 mm lifting capacity 1.000 kg Weight 490 kg (approx.)

Mixing system on steel construction with ring trogm (150 l. useful filling, 5.5 kW drive, 0.55 kW motorized outlet), bucket lift (1.5 kW drive, incl. winch, rope and rails) and control cabinet. Hardly used after revision, very good condition.

K.S. Automatik elevator from 2006. Conveyor width: 160mm Year of production: 2006 Serial number: 7 Condition: good Dimensions: 1.300mm x 600mm & 1.300mm (LxW&H)

Nominal rating 1000 kg/h Motor rating 0,37 (0,5) kW (PS) Connected load 230V 50Hz (single-phase) Electrical protection 16 A Length 2500 mm Width 700 mm Height 2100 mm Discharge height 800 mm Weight 150 kg Material 1.4301 / AISI 304 Connection for cleaning ½\" inside Connection for washing vessel 1½\" outside Height fruit outlet 1750 mm ; new machine - top condition