130,800 used machines on RESALE, but how to find them? Machine Search
Max. size= 92 x 63 cm, Availability= 062025, Format 920x630mm capacity 750kg max.pile hight 1210mm LOT Loaded in truck or container
Pile lifter Rachner RSL 50-A; Condition unused; Platform size 890x630mm; Load capacity 650KG; Automatic mode with light barrier. Pile lift Rachner RSL 50-A; condition never used; size 890x630mm; lifitng capacity 650 kg; autimatic mode with light bar.
Stock number: F682, Capsule elevator,, standing in painted rack., Conveyor with dogs W 100 mm., Outlet height 2000 mm., Product silo L 900 x W 900 mm.
Stock number: F1026, Capsule elevator, stainless steel,, silo for capsules 820 x 1200 mm., Elevator W 100 mm. with carriers,, height of outlet 2100 m., 0,18 kW., 220/380 Volt., Material: Stainless steel AISI 304
An external lift Büter Hebetechnik GmbH is available. Payload: 2000kg, lifting height: 8160mm, lifting time: approx. 45s, lowering time: approx. 45s, drive power: 6.2kW, stops: 3, ground floor height: 0mm, 1st floor height: 4450mm, 2nd floor height: 8355mm, internal dimensions X/Y: 1500mm/1260mm, largest pallet: CP2. Documentation available. An on-site inspection is possible.
Wheelchair-accessible silo system from Hedemann in a stable design. The facility was purchased new in 2016 for 100k and is in very good condition. Filling from below is carried out by an elevator. At the top, the distribution to the two silos is controlled via a folding box. The smooth silo inner walls make the silos easy to clean, which is positive for product changeovers. 2x 25 t (bulk density pellet 800 kg/m³), built in 2016 If you are interested, please write to us and you will receive further detailed information.
Pile lifter Polar LW 450-2; cleaned and tested; Tub size 620x900mm; Load capacity 450kg; Light barrier; Stroke 850mm. Pile lift Polar LW 450-2; cleaned and checked; size 620x900mm; lift capacity 450kg; Photo Sensor; throw 850mm.
Pile lifter Polar LW 450-1 EV; cleaned and tested; Stacking device; Tub size 620x900mm; Load capacity 450kg; Light barrier; Stroke 850mm. Pile lift Polar LW 450-1 EV; cleaned and checked; angular boards; size 620x900mm; lift capacity 450kg; Photo Sensor; throw 850mm.
Width 1.2 m Height 2 m Length 4.6 m
Can go up to 22 m in height. In working order. Auction-ID: A3-43528-6001
Impressions=0 m, Condition= Good , Availability= 2025-11-03, Pile turner Max weight 500kg Top working condition
A Wiese pendulum bucket elevator in Z-shape for gentle vertical and horizontal conveying of sensitive, light bulk materials (potato chips) is available. Particle size range: 50mm-60mm, max. conveying material temperature: 30°C, moisture: dry, bulk density: 0.07t/m³, conveying capacity: approx. 14.3m³/h, belt speed: 0.22m/s, max. bucket filling: 60%, belt material: EPDM, bucket width: 476mm, support roller diameter: 95mm. Lower edge discharge: 4960mm, feed vertical shaft center: 3490mm, vertical shaft center last discharge: 1675mm. Documentation available. An on-site inspection is possible.
Pile turner with - blower - jogger Load capacity: 800 kg Plattform internal sizes: 900 x 600 mm Sheet size: 860 x 600 mm max. opening: 1330 mm min. opening: 450 mm
Gebhardt Freight Elevators ConVer 146.03, 4 Stops, Doors Bottom Front Upper Stops Rear, Drive Top Right and Top Left, Colour 5019/7053 Conveying height 9600 mm (heights adjustable) Car width 2800 mm / Car depth 2060 mm / Car height 2000 mm Drive-on ramp 100/ pit 120mm possible Year of construction 2017 Delivery time with adjustment approx. 8 weeks, without changes 4-6 weeks the price quoted is only an approximate price per machine without assembly/freight and VAT (exact price will be calculated depending on the renovation work required) Seller Offer No. resale 2170139/2170140
GEBHARDT ConVer 146.02 freight elevator, 2 stops, doors at the bottom front - upper stop at the back, drive at the top right Conveying height 4,580mm (heights adjustable) Car width 1200mm/ Car depth 1460mm/ Car height 2000mm Ramp 60mm/ pit possible Year of manufacture 2007 Delivery time for adaptation approx. 8 weeks without changes 4-6 weeks
Horstmann SEW Elevator Cable Winch RA2467 Technical data: Frame dimensions: 1380x100x600 mm (HxLxW) Winch diameter: Ø = 450 mm (1420 mm circumference) Steel rope thickness: 10 mm Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 7.5 S1 Rope length: 14200 mm (14.2 m) Speed (v m/s): 0.54 Pulling force: 11600 N /1160 kg Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG
Elevator motor, gear motor, electric motor, stop motor, drive motor, crane motor, bridge crane -Manufacturer motor Flender type: LUGA-160LQ-04Y -Manufacturer gearbox Wittur type: SRP3100 -Power: 25 kW -Speed: 59.4 rpm -Construction: B3 -Diameter shaft: Ø mm -Protection class: IP 54 -Brake -Number: 2x motors available -Price: per piece -Dimensions: 1060/660/H830 mm -Weight: 668 kg
Goods elevator, steep conveyor, height conveyor for thread rolling machine, flat-jaw thread rolling machine, vibratory conveyor -Manufacturer: Tortona, freight elevator aligned with long screws -Elevator usable width: 700 mm -Maximum diameter: 16 mm -Individual components: see photos -Dimensions: 1450/900/H3040 mm -Weight: 960 kg
- pile lift - max capacity: 1000 kg - Format Platform 80 x 120 cm
- pile lift - max capacity: 1000 kg - Format Platform 80 x 120 cm
with air blower min. opening width: 600 mm max. opening width: 1400 mm max. stacking weight: 1.000 kg with protective grid general overhauled 2016
Manufacturer: Gebhardt Model: CONVER 146 Year of Manufacture: 2018 Type of Machine : Freight Elevator Find more here - / Contact us at -
Pile lifter Polar LW 1200-4; cleaned and tested; Tray size 840x1270mm; Load capacity 1200kg; Stacking device; Photo sensor; Stroke 850mm. Pile lift Polar LW 1200-4; cleaned and checked; size 840x1270mm; lifting capacity 1200kg; angular boards; Photo Sensor; throw 850mm.
Polar Transomat TR 130 EL 4 (2001) Automatic format setting
Built in 1981 Stacking lift Tub system photoelectron. Stack Scanning mobile Delivery date: immediately from stock
1 conveyor of 2600mm x height 160mm belt width 350mm 1 x 7600mm conveyor x 6000mm belt width 6000mm ⚠️This lot is part of a combination — read carefully before bidding This lot is part of the combination n°102 which includes the items n° 102 of the ... Nos. 16, 19, 21, 22, 23 and 25. Closing: The combination will close approximately 20 minutes after the last individual lot in the combination closes. Adjudication: At closing, two scenarios are possible: - If the bid on the combination exceeds the sum of the best individual bids → the combination is awarded, the individual lots will be void. - If the bid on the combination is less than this amount → the individual lots are sold separately, the combination will not be accepted. Auction-ID: A1-45912-19
Material: Stainless steel Built: 1993 Content: 1770 ltr Pressure inside: 0.5bar Pressure outside: 10bar Weight: 5000 kg L x W x H: 4700mm/900mm/1200mm An indirect heat exchanger with mechanical material transport. Very good condition. YOU ARE A NEW, OUTDATED AND USED
used
Manufacturer PWH Flow capacity 400 m3 hour of bulk material Grit 0 to 30 mm Bulk weight 0.84 to 0.90 to / m3 Water content 18% Heap height 12 meters Operating voltage 380 V Control voltage 220 V Bucket capacity: 100 litres • Number of shovels: 8 pieces • Bulk per minute: 60 • Theoretical power: 360 m3/h • Effective power: 280 m3/h • Bucket wheel diameter: 3.45 m • Circumferential force (wheel): 15,000 N • Cutting speed on the knife: 1.35 m/sec • Removal height (heap height): 12 m • Discharge of the lowered wheel: 11 m • Lifting height on the paddle wheel: 6 m • Lifting speed on the paddle wheel: approx. 3 m/min • Senovice speed on the paddle wheel: approx. 3m/min • Swivel speed: approx. 12 m/min • Angle of rotation of the trolley (suspension): 360 • Angle of rotation of the trolley
MATEC Stappler tipping bucket type 2 The tipping bucket can be locked with a bolt with cotter pin so no tipping is possible. The tipping buckets can be supplied also with a hydraulic tilting device. The blades are 1950 mm wide and type 2 1300 mm deep. The standard blade height is 450 mm. Solid wall or lattice towers can be ordered as accessories. The nominal weight of the shovel is 2000 kg. Each blade has 4 lifting eyes for crane handling. 4 mm thickness, corners and a replaceable wear bar reinforced permit prospecting. Other blade dimensions are possible upon request. Year 2017 New machine Spare parts/service MATEC CH-4952 Eriswil/DE-79618 Rheinfelden Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 ...
Inclined lift with motorized winch (7.5 kW / 36 UPM), lifting bucket (1,000 l. usable volume), weighing frame / foot station (2,000 kg max.), 25 m rope and head station for material transfer. Rope and SEW winch drive are new; Elevator was used to feed an Eirich intensive mixer type R(V) 18. Technical documentation is available.
tilting recess, chip recess, Chip wagons, Forklift trly, Scrap bucket Dimensions: Width x Length x Height (approx. 74 x 73 x 135 cm) Total height: approx. 94 cm 4 wheels handle rocker arm Outlet tap Portable with forklift As shown, it is sold with various sheet steel boxes. All information without guarantee
tilting recess, chip recess, Chip wagons, Forklift trly, Scrap bucket Dimensions: Width x Length x Height (approx. 74 x 73 x 135 cm) Total height: approx. 94 cm 4 wheels handle rocker arm Outlet tap Portable with forklift As shown, it is sold with various sheet steel boxes. All information without guarantee
small tipping container, width 63.5, height 98.5, length 125.0 cm for forklifts with fork width 11.5 cm
tilting recess, chip recess, Chip wagons, Forklift trly, Scrap bucket Dimensions: Width x Length x Height (approx. 74 x 73 x 135 cm) Total height: approx. 94 cm 4 wheels handle rocker arm Outlet tap Portable with forklift As shown, it is sold with various sheet steel boxes. All information without guarantee
Langguth V 81 Bucket Destapler,Destapler for unpalpping buckets Bucket size from 2.5 - 20 l automatic handle alignment Very good condition, directly from production!
hydraulic tipping tank or tipping bucket Price: 800,-p.pcs. + VAT reclaimable: R928 hydraulic tipping trailer, tipping wagon MAFI hydraulically tiltable by means of a manual hydraulic pump. Load capacity 2000 kg Overall height 2000mm Inner body dimension Br.1900mm Flat 900mm top 1450mm 2 pieces are to be handed in Because they have been stored for years, they are partly rusty or the paint is peeling off. Otherwise very good technical. Condition in my opinion see also photo of the cylinders easily convertible as a tipping container on a forklift (has been done before) unscrew the chassis weld on 2square tubes for fork mounting Unscrew the manual hydraulic pump with quick couplings and adapt it to forklift hydraulics It is best to visit and try it out for yourself. I had several at one of them the chassis was removed and the holder for forklifts was welded on, intended for wo ...
tilting recess, chip recess, Chip wagons, Forklift trly, Scrap bucket Dimensions: Width x length x height (approx. 74 x 73 x 135 cm) with sheet metal wall attachment approx. 30 cm, three sides Total height: approx. 94 cm 4 wheels handle rocker arm Outlet tap Portable with forklift Sold as shown with sheet steel cabinet. All information without guarantee
Digging bucket, excavator bucket, demolition bucket, trenching bucket -Design: stable -Width: 275 mm -Height: 715 mm -Depth: 1020 mm -Intermediate mounting dimension: 185 mm -Hole diameter: Ø 50 mm -The attachment to the spoon: can be changed by us for an additional charge. -Weight: 120 kg
Quick-change attachment for wheel loader buckets, screening buckets, stone buckets, shovels, sorting buckets -Quantity: 5 pieces of various types -Number: 5 different manufacturers -Sale: only complete set -Price: complete -Total weight: 136 kg
Lid folding machine, folding machine, folding machine, lid folding machine, can folding machine, can folding machine -Lid seaming machine for sheet metal buckets -The machine creates the fold for the lid -Dimensions: 1000/1200/H1150 mm -Weight: approx. 800 kg
tilting recess, chip recess, Chip wagons, Forklift trly, Scrap bucket Dimensions: width x length x height (approx. 94 x 76 x140 cm) Total height: approx. 118 cm 4 wheels handle rocker arm Outlet tap Portable with forklift Sold as shown with various sheet steel boxes. All information without guarantee
maximum number of results exceeded
please refine your search
200 € 
