bucket elevator used for sale

wheel loader, manufacturer: KRAMER, type: 5065, year of manufacture: 2020, fuel: diesel, total weight (kg): 4,500, reading operating hours (h): 862, vehicle identification no.: 349011833, 1 grab bucket KRAMER 10000275259, serial number: 071433 0320 0804, year of manufacture: 2020, width: approx. 165 cm, weight: 440 kg, 1 pallet fork WACKER NEUSON , Damage: all around Signs of use

used butter reworker Make: ROTHENBURG Fabr. No. 53400 Year of construction: 2010 Capacity: 4,5to./h Including Elevator The plant will be in operation until the end of July 2024. Price is a matter of negotiation!

was in action behind a 2019 FOSS Inline Fat Analysis System Meat Master(TM) II,, for raw meat,, designed to be mobile,, effective width: 400 mm,, feeding distance: 820 mm,, gradient: approx. 60° - length: approx. 3,800 mm,, Delivery height: approx. 2,500 mm,, Delivery distance: approx. 930 mm,, Lug width: 400mm, Stud height: 50mm, Cleat pitch: approx. 200mm, Hygienic version with central scaffold tube. The construction is very open. The belt is removed using round material. Drive and deflection stations are designed with sheet metal parts. In the lower run the, Belt worn by rollers. The conveyor is equipped with a quick clamping system. Thus, the belt can be lifted for cleaning or removed from the side. The belt is positively driven and, also forced, Support:, with rectangular tube support frame with castors, Product Tours:, Plastic profiles swiveling on both sides, Clear width = stud w ...

Line for filling delicatessen products in plastic trays, consisting of:, Cup filling system, make Waldner, type 12.3, year 2011, 2 lanes (2 different formats) - but it can only be worked in one lane., Format set 1: round cup diameter 100mm (incl. rim) height 80mm and 60mm, Format set 2: Rectangular cup 185mm long 135mm wide (including rim) 35mm deep, The trays are sealed with film from the roll, Roll magazine approx. 500mm long, 400mm wide, Waldner space requirement: approx.: 2,100 m 2,100 mm, Outfeed belt of the Waldner: approx. 1,800 mm, Dosing of liquid and free-flowing components:, The system has two filling heads, which are filled via a pipeline directly from the cooking kettle., The pipeline can be completely pigged., The pigging line and Maso - Sinus pump, type SPS 3, are included in the scope of delivery., Feeding of the multihead weigher by means of two belts:, Tunnel elevator  ...

Sieving bucket 80cm wide for Rhinoceros XN08-12 mini excavator!

Digging bucket 20cm wide for mini excavator XN08-12!

Potato processing line (French fries and split potatoes),, - French fries - line, Potato (French fries) processing line,, Output: approx. 220 kg per hour based on the end product,, French fries dimension 10x10x60 mm, consisting of:, feed bunker with stone catcher,, Carborundum - roller peeler, number of peeling rollers: 7,, Length of the peeling rollers: approx. 2,700 mm, new rollers, with interchangeable roll set for quick replacement of the rolls,, alluvial basin with discharge - elevator,, Bunker conveyor belt, make Marcelissen, type BNT 350-400, Knife block, make Marcelissen, 11x11 mm, Extension conveyor belt with small container, Marcelissen, Roller sorting table, make Marcelissen, type IR 2000-600, Narrow piece sorter, make Marcelissen, type FR4-1750, Flipmaster, make Marcelissen, type 902 MA, With swiveling supports, Continuous fryer make Riehle, type DLA 300 SC-3, 54 kW, vHi, Wit ...

Digging bucket 38cm for Rhinoceros XN08-12 mini excavator!

Leveling bucket 80cm wide, hydraulically swiveling for mini excavator XN08-12!

Ditch clearing bucket for mini excavator XN08-12!Width 80cm!

Speed: 8.000 bph with 0,5 liter bottle. Different formats are possible optionaly. Dismanteling is made by Seegräber GmbH on begining februar 2018. List of machines included: -SIDEL SBO 6 Blowing machine. Completly overhault by SIDEL in 2006. -Preform magazin and preform elevator Compressor, cooling, moulds not included More then 300 machines new and second hand on our seema .de

Description: Narrow chassis 700mm offset skid 3m wide High and low flow lines 3m dipperstick GROENEVELD centralised lubrication S80 ENGCON hydraulic hitch 1 bucket (1600mm) Cummins engine Kawasaki pump Overhauled machine OPERATING MASS: 32264KG ENGINE POWER: 209kW Approx. Onsite Dimension. (l x w x h): 10,667 x 2,990 x 3,225 mm, weight approx.: 32,265 kg

Description: 2.9m dipper High and low flow lines 600mm offset skid 3m wide GROENEVELD automatic greasing system ENGCON S70 hydraulic attachment 3 fixed buckets (2m, 1.5m, 600mm) As is' condition Approx. Onsite Dimension. (l x w x h): 9,728 x 3,000 x 3,440 mm, weight approx.: 21,900 kg

Description: 2.9m dipper High and low flow lines 700mm offset skid 3m wide GROENEVELD automatic greasing system MORIN hydraulic attachment 3 fixed buckets (2m, 1.5m, 600mm) Overhauled machine Approx. Onsite Dimension. (l x w x h): 9,490 x 2,990 x 3,005 mm, weight approx.: 22,100 kg

Description: Narrow chassis 700mm offset skid 3m wide High and low flow lines 3m dipperstick GROENEVELD centralised lubrication End of dipper (No attachment, no buckets) Overhauled machine MAX. OPERATING MASS: 27 300 KG ENGINE POWER: 140kW Approx. Onsite Dimension. (l x w x h): 9,880 x 2,990 x 3,340 mm, weight approx.: 25,700 kg

Description: 2.9m dipper High and low flow lines 600mm offset skid 3m wide GROENEVELD automatic greasing system ENGCON S70 hydraulic attachment 3 fixed buckets (2m, 1.5m, 600mm) Overhauled machine OPERATING MAS: 27000KG ENGINE POWER: 145 Kw Approx. Onsite Dimension. (l x w x h): 10,290 x 3,000 x 3,255 mm, weight approx.: 27,000 kg

Description: 2.9m dipper High and low flow lines 700mm offset skid 3m wide GROENEVELD automatic greasing system End of dipper (No attachment, no buckets) Overhauled machine OPERATING MASS: 22400 KG ENGINE POWER: 124,3 Approx. Onsite Dimension. (l x w x h): 9,490 x 2,990 x 3,005 mm, weight approx.: 22,100 kg

Description: High and low flow lines 3m dipperstick GROENEVELD centralised lubrication S80 ENGCON hydraulic attachment 1 bucket (1600mm) Overhauled machine Approx. Onsite Dimension. (l x w x h): 10,080 x 3,180 x 3,675 mm, weight approx.: 36,200 kg

total power requirement: 3,0 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: 1,6 x 1,4 x 1,6 m Single shaft shredder cutting system chip shredder Performance values: Motor cutting unit 3.0 KW Temperature range 15-40 degrees Celsius Voltage 400V Power consumption 3.0 KW Length x width x height with flat gear 1.50 mm x 575 mm x 315 mm Mounted on a mobile base frame including mobile/tiltable bucket cart including documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pillar-mounted slewing crane:: mobil arm length: ca. 2500 mm weight of the machine ca.: 4 t weight max. in kg: 125 kg bucket net weight: 430 kg bucket filling weight: mindestens 416 kg bucket - total weight: mindestens 846 kg max. wheel load: 391 kg max. support load: 544 kg : . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Power 1.5 kW, water cooling, 220V power supply. 1. Laser metal welding, the basic welding seam is beautiful and fast, the operation is easy to learn, the welding is firm, and the sealing is good, 2. The portable air-cooled handheld laser welding machine adopts an integrated integrated fiber laser and is equipped with a self-developed wobble welding head. The high-tech air-cooled heat dissipation system fills the new application of hand-held welding in the laser equipment industry. It has multiple advantages such as simple operation, beautiful weld seam, fast welding speed, small size and convenient transportation. It is suitable for welding thin stainless steel plates, iron plates, and galvanized plates. , aluminum alloy and other metal materials, it can perfectly replace traditional argon arc welding, electric welding and other processes. It can be widely used in complex an ...

Description: Power 1 kW, wavelength 900-1200 nm, pulse frequency 0-10 kHz, power supply 220 V. 1. Laser metal welding, the basic welding seam is beautiful and fast, the operation is easy to learn, the welding is firm, and the sealing is good, 2. The portable air-cooled handheld laser welding machine adopts an integrated integrated fiber laser and is equipped with a self-developed wobble welding head. The high-tech air-cooled heat dissipation system fills the new application of hand-held welding in the laser equipment industry. It has multiple advantages such as simple operation, beautiful weld seam, fast welding speed, small size and convenient transportation. It is suitable for welding thin stainless steel plates, iron plates, and galvanized plates. , aluminum alloy and other metal materials, it can perfectly replace traditional argon arc welding, electric welding and other processes. I ...

Year : 09/2008 Number of hours : 11100 h Table dimensions: 1450x650 mm Table load capacity : 1300 kg Travels : X1300-Y650-Z600 mm Spindle taper: ISO 40 Speed: 8000 rpm, 2-speed gearbox Motor power: 15 KW Tool magazine: 24 stations Tool type: BT40 Rapid feed speeds 24/20/20 m/min CNC FANUC 18i-MB Electronic handwheel 20-bar high-pressure spindle coolant Chip conveyor + bucket Spindle cooler Air-conditioned cabinet Set of 70 ER & Weldon collet holders, boring bars, milling cutter holders, etc. Visible under power Very good condition Dimensions: 3650x2340x2940 mm Weight : 7600 kg Loading included

Description: interior dimensions approx. 900 x 550 x 700 mm with buckets of sand Approx. Onsite Dimension. (l x w x h): 1,800 x 1,400 x 1,600 mm, weight approx.: 800 kg

Description: Mini crawler excavator, complete with digging bucket, electronic ignition, rubber tracks, rotating 360 degrees turntable, hoses and hammer drive. Never used 0 hours The color of the excavator may vary depending on availability (yellow, red, other) Approx. Onsite Dimension. (l x w x h): 1,200 x 3,000 x 2,500 mm, weight approx.: 1,100 kg

Description: Mini crawler excavator, complete with digging bucket, electronic ignition, rubber tracks, rotating 360 degrees turntable, hoses and hammer drive. Never used 0 hours The color of the excavator may vary depending on availability (yellow, red, other) Approx. Onsite Dimension. (l x w x h): 1,200 x 3,000 x 2,500 mm, weight approx.: 1,100 kg

Description: Mini crawler excavator, complete with digging bucket, electronic ignition, rubber tracks, rotating 360 degrees turntable, hoses and hammer drive. Never used 0 hours The color of the excavator may vary depending on availability (yellow, red, other) Approx. Onsite Dimension. (l x w x h): 1,200 x 3,000 x 2,500 mm, weight approx.: 1,100 kg

Description: Mini crawler excavator, complete with digging bucket, electronic ignition, rubber tracks, rotating 360 degrees turntable, hoses and hammer drive. Never used 0 hours The color of the excavator may vary depending on availability (yellow, red, other) Approx. Onsite Dimension. (l x w x h): 1,200 x 3,000 x 2,500 mm, weight approx.: 1,100 kg

Description: Mini crawler excavator, complete with digging bucket, electronic ignition, rubber tracks, rotating 360 degrees turntable, hoses and hammer drive. Never used 0 hours The color of the excavator may vary depending on availability (yellow, red, other) Approx. Onsite Dimension. (l x w x h): 1,200 x 3,000 x 2,500 mm, weight approx.: 1,100 kg

Description: Electric wheel loader, double engine, 4x4 traction, equipped with bucket, forks and battery charger. Approx. Onsite Dimension. (l x w x h): 2,700 x 900 x 1,600 mm, weight approx.: 1,000 kg

Description: Electric wheel loader, double engine, 4x4 traction, equipped with bucket, forks and battery charger. Approx. Onsite Dimension. (l x w x h): 2,700 x 900 x 1,600 mm, weight approx.: 1,000 kg

An overhauled (reconditioned) mobile concrete batching plant Incl. guarantee Manufacturer: Stetter Type: M1 TZ Overhauled in: 2024 Power: 56m3 aggrgate storage / compartment batcher: 4 X 10 m3, total 40m3 Mixers: pan mixer , Stetter T 1000, compacted concrete output 1.00 m3 per charge Dosage: Aggregate wheighing in the skip bucket 2500kg Cement scale 500 kg water dosing hopper 250 kg Additive scale 1 X 12.0 l Control: STETTER MCI 460 (optional GEDIS IBS 33 W possible) operator stand in a office container installed Cement silo: Optionally possible cladding/housing: Optionally possible Delivery time: according to agreement (immediate available) Delivery free construction site possible assembly and commissioning possible by us Price on request Offers and prices are net ex location. Subject to prior sale, subject to errors and/or misrepresentations, without g ...

Powder and seed doser - 0.5 - 15kg Quenard Soret Stainless steel frame with height-adjustable bag holder 100-liter primary hopper - Weight doser with 2 load cells )Capacity from 309 to 1kg in bucket with chute )Capacity from 1kg to 15kg on weighing pan 20-program PLC Food-grade stainless steel parts in contact with the material -Pedal or automatic cycle start -Production up to 600 b/h depending on volume -220 v and 5 bar power supply

Manufacturer: Norden Model: NM 250 HA Year: 2003 Type: Hot air plastic tube filler / sealer Max capacity : 25 units / min Transport chain : 14 buckets Empty tube feeding : manual Tube printing centering 20 L hopper HA hot air device Ribbed or smooth sealing 1 side coding: 6 characters Verification check: no tube - no filling Available formats. Cutting recovery: CFM R154V hoover ThermoChill I Recirculating Coolers General information Filling volumes: 1ml - 300ml. Diameter: 10 mm - 50 mm

Description: Serial number: 22C050362 Operating hours read: 86.4 h Own weight: 880 kg Capacity: 0.025 m³ Power: 7.6 kW Equipment: with front-mounted dozer blade, Seats: 1 with 2 pcs. Armrests, still wrapped, with backhoe W approx. 360 mm, 1 pc. Grapple B 610 mm, 1 pc. Slope bucket with swivel function W approx. 750 mm, 1 pc. Backhoe bucket B 170 mm, 1 pc. Ripper B 500 mm, 1 pc. Earth auger L approx. 1,400 mm, 1 pc. Hydraulic chisel with attachment L approx. 950 mm Condition note: various abrasions and paint damage all around mini excavator Location: A-3242 Texing Approx. Onsite Dimension. (l x w x h): 2,500 x 1,000 x 2,200 mm, weight approx.: 1,000 kg

Description: FIN: WNCE1602H00002096 Model: EZ36 Power: 18.2 kW Operating weight: 3,973 kg Transport weight: 3,801 kg read operating hours: 435 h Inspection sticker read: 11/2021, next service according to inspection sticker: 03/2023 Equipment: with front-mounted dozer blade, length approx. 175 cm, with rotatable quick-release plate GELL, 1 pc. Backhoe bucket GELL with tines, length 66 cm, fabric upholstery, seats: 1, 2 pcs. Front headlights, 2 pcs. rear headlights, cab heating, glazed safety cab, upper windshield retractable inwards, lower windshield removable, windshield wiper system, radio preparation, antenna, loudspeaker, wiring, LED headlights, Powertilt Known defects: various abrasions, paint damage and rust spots all around 'excavator Location: A-3242 Texing Approx. Onsite Dimension. (l x w x h): 5,500 x 1,800 x 2,600 mm, weight approx.: 3,900 kg

Description: Lot composed of various equipment for industrial cleaning: Portable compressor NILFISK ADVANCE liquid vacuum cleaner 4 Trolleys complete with detergent and bucket carriers KARCHER carpet beater Carpet beater 3 MOP trolleys MOP wringer 12 Brooms with handle 10 Brooms without handle 35 Mop heads for floor cleaning LAVOR SCL COMPACT FREE 45 B industrial floor polisher Single brush 1 Wet bucket 1 3-step aluminum ladder 1 2-step aluminum ladder 1 3-foot aluminum ladder OZONE TERMINETER CB14 Sanitizer 1 Desk with drawers 1 Office armchair 2 Office chairs 1 Non-functioning HP printer 1 ACER EXTENSA 5230E Notebook 1 CANDY SMART 7kg Washing machine 1 Split MXD Convector heater Surplex does not offer loading service for this lot Approx. Onsite Dimension. (l x w x h): 0 x 0 x 0 mm, weight approx.: 0 kg

Used Syrup Room A DUE SYRUP ROOM 1999 The syrup room is in excellent condition almost new barely used Components One Sugar dissolving tank with pasteurizer and filtration One Sugar loading screw conveyor Two 10 000 L tanks Two 20 000 L tanks One Tray One walkway connecting silos One Pasteurizer 2500 l h ONE DISSOLUTION TANK 10 000 L capacity the tank is composed of the following components 1 Conical manhole top cover 2 Pasteurization and filtration system for sugar solution 3 Central cylindrical plating 4 Cone shaped bottom 5 Square support feet 6 Vertical agitator group 7 Supply pumps ONE LOADING SCREW ELEVATOR 12 000 kg h flow loading screw to be used to load crystalline sugar It is composed of Hopper Easel Loading screw Motor gearmotor group Protective grid ONE PASTEURIZER 2500L h Pasteurizer made of AISI 316 and 304 steel components 1 Plate heat exchangers 2 Thermoregulator tool 3 Fl ...

1,550 cbm/h Reclaimers; Bucket Wheel Excavators With Tripper Cars available at least until mid-2024; machines are both still powered and can be tested on site in SE-Europe; purchase of one machine only is possible, too compact open mine excavator machine, to be flexibly used to soft soil, sand, lignite etc., can operate with or without tripper car; also available as single machine at 179 T Euro each 11.6 m length of bucket wheel boom; 10 m cutting height; 7 buckets of each 350 litres volume 181 t + 35 t total operating weights

ID3264 Caterpillar 972-14A year/Year of construction 2023 1030 hours/hours 25 t with bucket, without quick coupler, with central greasing with bucket, without quick coupler, with central lubrication

Overview  The filler + capper block was manufactured in 2021 by the German company ALWID. It is part of a new filling line and can fill chemical products into plastic containers. The machine has ATEX certification, which allows it to process explosive products. The machine can be purchased with warranty.  Technical data  Fully automatic rotary filler Filling system: mass flow meter system, type: Endress+Hauser LPG MASS Number of filling stations: 16 filling stations Max. container dimensions: Height: 50-300 mm, Ø: 20-100 mm Pressurized feed tank for constant flow through flow meter  Below level filling to avoid foam formation during filling  Adjustable bottle neck centering  Electr. level measurement  CIP capable  Designed for riser pipe processing Fully automatic round capper Number of capping heads: 5 With torque adjustment via slip clutches With fully automatic cap sorting an ...

Cork elevator with cork orientation More then 300 machines new and second hand on our seema .de

Description: Industrial planetary gearbox and drive shaft for tunneling machines. Features: 1 Gearbox (833101030, 1472270) 1 Gear Unit (B: 1472322, CH: 39959) Explosion-proof Planetary gearbox with integrated, bearing-mounted output pinion 300kW to 400kW 280 kNm Max Output Torque 345 kNm Max Static Output Torque Typical application areas: Sugar mills Stacker reclaimers Bucket wheel excavators Mining excavators Roller presses Extruders Approx. Onsite Dimension. (l x w x h): 2,000 x 800 x 850 mm, weight approx.: 1,210 kg

Overview The KSB3000 blowing machine was manufactured in 2001 by the Austrian machine builder KOSME. It is located at a machine builder and can be visited in dry run to see the functionality of the machine.  Technical details  Capacity: 3.600 bph  3 cavities Dimensions (LxWxH): 6830 mm x 2860 mm x 2450 mm  space requirement approx. 9x5 m²  weight: 4,5 t  Operating hours: 19.935   Bottles Volume: 250 ml - 2500 ml   Max. Diameter: 110 mm  Scope of delivery  Blow molding machine is completely equipped with the system for preform feeding (the silo, the preform elevator, the preform aligner and the preform infeed).

Overview The empty bottle inspector Linatronic was manufactured 2011 by German company Krones. The machine is already dismantled. Techn. Details Running direction: left-right Detections: Ground inspection Camera Sealing surface inspection camera  Thread inspection camera with cone optics  Sidewall inspection camera  Residual liquid and residual caustic detection By high frequency By infrared  Design of muzzle illumination DualFlash for more precise inspection of the sealing surface Scope of delivery Ejector before machine   Rejector belt for color and break in bucket, Rejector belt to return to washing machine

Stöcklin automated pallet infeed and outfeed system, year of construction: 2008, 5-lanes from pallet storage to loading docks and manual infeed/outfeed, steel rollers, roller width: 900 mm. Lane 1: infeed from shuttle 1 to pallet storage, capacity line 1: 88 pallets per hour, Lane 2: outfeed from shuttle 2 to pallet storage, capacity line 2: 54 pallets per hour, Lane 3: infeed for from manual infeed to pallet storage, capacity line 3: 72 pallets per hour, Lane 4: outfeed pallet storage to (2x) manual outfeed, capacity line 4: 72 pallets per hour, Lane 5: infeed from sorting lane, capacity line 5: 42 pallets per hour, capacity shuttle 1: 63 per hour, capacity shuttle 2: 63 per hour, including: (3x) Altek Hebetechnik GmbH lifting platform for pallets and (2x) pallet elevator, lifting height: approximately: 4500 mm, total dimensions room: 27500 mm x 24000 mm.

Sabiel Ingenieurbüro und Apparatebau GmbH palletizing installation for buckets, type: EIMER-PAL, product number: 19.141, year of construction: 2002, 400/230 VAC, 50 Hz, 24 VDC, 63 A, 6 bar, consisting of: M.A.S. Fördertechnik und Anlagenbau s/s pallet de-stacker, Sabiel spacer unit, various in- and outfeed roller conveyors for pallets, infeed conveyor for buckets, Motoman Robotics Europe AB palletizing robot, type: ERC3-SP100X-160-RE00 and switch cabinet, total dimensions: 8750 mm x 7875 mm x 3200 mm.

Description: VIN: HHKHZ701CC0000294 engine: CUMMINS QSB6.7 engine power: ,121 kW / 165 HP ,/ 1900 rpm working hours: approx. ,8948.6 hrs. width of the pads: 600 mm length of the stick: 3100 mm digging bucket with teeth width of the bucket: 1250 mm piped for hammer, shear and clamp AM/FM Radio  , please also have a look at the video of this excavator serial number: HHKHZ701CC0000294, Approx. Onsite Dimension. (l x w x h): 1,000 x 3,050 x 3,600 mm, Motor manufacturer: CUMMINS, Motor type: QSB6.7, Blade width: 1,250 mm, weight approx.: 25,000 kg

Description: VOLVO EC210BLC Excavator (3078) Engine: VOLVO D6D Gross Power: 119kw (159HP) Boom: 5.91m Arm: 3.53m 20.100 hours PIN: EC210V13783 Hammer NOT Included Bucket QH Approx. Onsite Dimension. (l x w x h): 9,650 x 3,000 x 2,930 mm, Motor manufacturer: VOLVO D6D, weight approx.: 21,000 kg

Description: • Telehandler • Spanish registration number: E 9267 BHD • Serial number JCB5XK2GJK2790857 • Maximum load capacity 3200kg • Maximum lifting height 7000 mm • Maximum front reach 3720 mm • Load capacity at maximum height 2750 kg • Load capacity at maximum reach 1675 kg • Reach with 1000 kg load: 3720 mm • With bucket with useful dimensions approx. 2260 x 1200 x 1000mm • JCB EcoMax engine, power 81 KW • IMPORTANT: • The buyer is responsible for everything related to the loading of this equipment • Surplex will deliver this vehicle to the buyer with a Sale Notification in DGT (Spanish traffic authorities). Approx. Onsite Dimension. (l x w x h): 6,380 x 2,360 x 2,500 mm, weight approx.: 7,600 kg