bucket elevator used for sale

Used complete isobaric filling line Krones up to 32 000 bph Significantly the Used complete isobaric filling line Krones up to 32 000 BPH is a technologically advanced line Specifically it s designed for PET filling with water both still and carbonated and soft drinks CSD Impressively this used isobaric filling line offers an impressive capacity of up to 32 000 bottles per hour BPH combining efficiency and precision in the bottling process Main Component KHS Blomax Blower Central to the line is the KHS Blomax 18 blower achieving a maximum productivity of 32 000 B H Included in the equipment are a preform silo elevator and unscrambler plus an air recovery system Additionally a new touch HMI Human Machine Interface has been installed and the machine has been completely overhauled It has been adapted to work with a single type of neck preform e g 1L 30gr Preform PCO1881 and comes with a set ...

Overview This machine was built in 1998 by French manufacturer Sidel. The machine is in very good working condition, is already professionally dismantled and stored in a warehouse. Techn. Details Capacity: 7.200 bph in 1,5L Number of moulds:  6 (molds not included) Equipped with quick change for shell molds Number of heating modules: 10 modules Neck personalization: 29/25           Working hours: 47.000 only            Machine was regularily maintained       Machine equipped with:                     Sidel preforms elevator to unscrambler Sidel preforms unscrambler & feeder Sidel oven & blowing wheel for 6 molds Sidel electrical cabinet Sidel PCC drive & control panel Big set of spare parts list upon request

Blasting Manufacturer: KIESS Year of construction: 2009 Cabin interior dimensions: LxWxH = approx. 5x8x4 m System screwed Inside extraction floor with grates integrated in the building Blast gun with hose and nozzle in addition, outside extraction and filter system with extraction motor Kiess CD355-1 Flow rate 10,000 m³/h Pressure: 350 bar Power: 15 kW Filter Tower DVP140-2 Steel Goods Container Taifun 200 4 extraction motors for floor ducts Elevator height approx. 500 cm Control cabinet Trolley on rails for workpieces approx. 250x125 cm

Approximately 3,000 running hours. Key Information: Output: 3150 containers per hour 250ml; 2700 containers per hour 500ml Molds and tooling for 250ml and 500ml IV bags/bottles (14 cavity) included Tooling for Eurocap or nipple/pierce top presentations Eurocap cap welding machine with cap elevator Three product filters 14 parison programable parison head with Moog controller.

Fully rebuilt by Weiler in 2018. Characteristics: Output: 2800 containers per hour Molds and tooling for 100ml IV bags/bottles (12 cavity, 12 parison) included Eurocap cap welding machine with cap elevator Including: - new fill system - new extruder drive - new parison head - hydraulic system overhaul

Van Meurs Aseptic bag-in-boxfilling machine Model: B200-C Used for: dairy (icecream and milkshakes) Capacity : Up to 250 bags per hour Size : 2 to 1200 liter pack Serial number : 932 Year of construction : 2000 Condition : Excellent Location : Netherlands Semiautomatic filling machine designed for aseptic filling of liquid products in bags with a cap. Process description: taking off the cap, filling by magnetic flow transmitter for counting liters and automatically placing the cap back on the bag. Placing the bags has to be done manually. The machine is multifunctional for small and large volumes: 2 - 1,200 liters bag-in-box, bag-in-drum, buckets or sterile containers. Dry sterilization by steam. Includes roller conveyor, height adjustable and fold-out table. Control cabinet and PLC control system. Many spare parts, multiple types of grippers for different type of containe ...

ID3088 Fiebig E500 year of construction approx. 1990 Scoop wheel, diameter 5,000 mm, cup width 700 mm, 22 cups, geared motor brand HUEBER year of manufacture, 1996, 4 kW, frequency converter available Bucket wheel, diameter 5,000 mm, bucket width 700 mm, 22 cups, geared motor brand HUEBER built in 1996, 4 kW, frequency converter available

Dead weight: 52.2t, max. dumping height 3.44m, lifting power 347.6 kN, displacement 16.1 L, engine power 394 kW, bucket capacity 6.5 m³

Dismantling saw EFA SK 18 WB, year of manufacture 2015, Connection 230V, with elevator, used, good condition, works perfectly

General SKU395U1156 LocationBarneveld MakeExakta TypeEXA EZ 125-45 Mach.No.123-20171-002-0914 Main Features Motor1.1 KW Length1600 mm Width450 mm Specified Features - Conveyor belt MaterialPlastic, Stainless steel Elevator beltcheck Trough type conveyor beltcheck Belt width450 mm Belt length1600 mm With carrierscheck With motor1,1 kW Outlet height950 mm Information Year of construction2014 Mounted on wheelscheck With switchcheck CEcheck Floorspace1,6x0,78 m Total height1,0 m Weight140 kgConveyor beltsExakta PackConveying systems > Conveyor beltsBrand > Exakta Pack What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Used root vegetables line by Boema. New 2007. Capacity 6000 kg/h. The line consists of: 1. Straight rubber lifter 2. Drum soil remover 3. De-stoning machine 4. Drum rinser 5. Straight elevator made of PVC 6. Steam peeler 7. Cooling tub with auger 8. Brush peeler 9. Single-screw pump with self-discharge hopper 10. Drum filter 11. Control belt

Used Complete Bottling Line Krones Up to 21000 BPH The bottling industry is continuously evolving As a result machinery is becoming more efficient and high performing Specifically the used Krones bottling line capable of reaching up to 21000 BPH stands out remarkably It is ingeniously designed for PET containers and specifically for still water Moreover it employs a volumetric filling method to ensure both precision and reliability Key Components of the Krones line up to 21000 bph This line includes several key components that contribute significantly to its high efficiency For instance the Sidel SBO 20 blow molding machine from 2004 is essential for preparing PET containers Additionally the AF CE6808 compressor from 2009 and the Atlas Copco GA18 from 2006 provide the necessary pneumatic energy for various stages of the process Container Handling In terms of container handling empty cont ...

General SKU334U821 LocationBarneveld MakeKek Kemutec TypeCM 220 No.B 32844 Year of construction11-2006 Main Features MaterialStainless steel Motor4 KW Width220 mm Specified Features - Sieve granulator Granulating sievecheck Conical granulating sievecheck Rotor sizesDia: 220x150mm Sieve sizesDia: 220x180 Sieve perforationDia:3mm (3x) InletDia:145mm Motor4kW, 400Volt, 1425rpm (ex) Speed1425 rpm With extra sievescheck MaterialStainless steel 1.4306 (304L) Information Total height0,75m Weight200kg Floor space1,1x0,53m ATEX compatiblecheck Extra SpecificationsThe product bucket has a diameter of 300 mm and a height of 300 mm. Bucket volume: ±20 liters. Powdered foodsSieve granulatorsKek KemutecIndustries > Food & Feed > Powdered foodsSieves > Sieve granulatorsBrand > Kek Kemutec What you can expect from Foeth: -- Machine is in working condition -- At a reduced pri ...

General SKU300U601 LocationBarneveld MakeKrämer TypeE2000S-250 No.3.4646 Year of construction2011 Main Features MaterialStainless steel Specified Features - Vibro sieve Vibro sievetablet deduster Inlet117x80mm Outlet80x47mm With air cleaningcheck MaterialStainless steel 1.4435 (316L) Information Mounted on stainl. st. framecheck Mounted on wheelscheck With switchcheck Weight310 kg CEcheck Floor space0,8x0,8 m Total height1,25 m Extra SpecificationsThe tablet deduster can handle tablets with a maximum diameter of 25mm at a speed of up to 3,500,000 tablets per hour, designed for 4.8x2.3mm tablets. It features a rotation conveyor elevator and a Ceia metal detector (type THS-PH21) with an input size of 90x25mm and an output size of Ø 65mm, all controlled through a dedicated control box.Minerals & inorganicPlastic & rubberPlastic & polymersSolid pharmaceuticsOther fe ...

Description: • Serial number 2046 • Standard tires 29.5 R25 • Bucket width 3480 mm • Standards bucket capacity 4.80 m³ • Steering type AL • Maximum Speed ​​35 km/h • Maximum pouring height 3100 mm • Lifting power 264 kN • CUMMINS QSM11 engine: displacement 10800 cc, power 250 KW • Working hours according to meter 16500  ,  ,IMPORTANT: , , The customer is responsible for all the loading related to the equipment. , Dimensions and weights are approximate. , , Approx. Onsite Dimension. (l x w x h): 9,320 x 3,210 x 3,800 mm, weight approx.: 29,800 kg

4 rolls, max rolling dimension 2,500 x 22 mm, allows cones to be made, practical for making buckets or anything related to public works.

Tetra-Plast LX-2 (Sidel) PET bottles blow moulding machine for sale, maximum capacity of 3.000 bottles per hour with zero working hours completed in 2011. The machine was dry cycled and tested by a Tetra-Pak (Sidel) technician. The machine has the following components: 1. Main PET bottles blow moulding module 2. Silo with elevator for preforms 3. Chiller for cooling MTA-TAE 051 4. Moulds lifting device The moulds are not included in the price. The price given is Ex-Works our warehouse. The Tetra-Plast LX-2 (Sidel) PET bottles blow moulding machine for sale with two moulds, serial nr. 40102/2542, maximum capacity of 3.000 bottles per hour with zero working hours, and size of bottles between 0 and 2 liters. The machine was completed, dry-cycled and tested in 2011. It does not come with a pressure compressor. The machine does the movements with a press. The mould was ...

200 cm working width, with Lehnhoff MS21 mount, mount width: 510 mm, bolt diameter 80 mm, embankment bucket suitable for 30 - 40 t excavators,

140 cm working width, mounting width: 510 mm, bolt diameter 80 mm, other buckets with Lehnhoff MS21 mounting in stock!

Volume bucket 180 cm working width suitable for 30-40 t excavators, with Lehnhoff MS21 mount, mount width: 510 mm, bolt diameter 80 mm,

Operating Instructions FMB Machining Center / Version 9. June 2011. Machining centres Software from Schüco installed Software design Special machines Operating instructions 7. technical data 7.1Machine dimensions Total length mm 9,750 Total depth / with LS mm2.750 / 3.300 Total height max. mm4.100 7.2 Axle travel X-axis mm approx. 7,100 Y-axis mm approx. 1,480 Z-axle bucket 710 V-axis (optional)mmca 6,980 A axis (optional)degrees180 ° Gajs30zga C axis (optional)degree360 ° W-axis (optional)mm 7.3Working spindle Spindle drive kW7.5 Spindle speedmin-120.000 Spindle mounting HSK E40 7.4Tools Mounting HSK E40 Wkzg positions 6 (more optional) 12 Wkzg maximum diameter mm 35 Saw blade Ø for milling spindle mm 400

Description: Ventilated benchtop centrifuge Mega Star 600, brand VWR Condition: Excellent, Year of purchase: End 2018. Price Characteristics: Benchtop centrifuge ideal for a wide range of applications such as the research in the pharmaceutical and biotechnology industry and research university. Auto-Lock 3 rotor locking system: Rotor change without tools at the touch of a button; users can quickly change the rotors and easy access to the rotor chamber for cleaning. ClickSeal aerosol-tight bucket sealing system: user-friendly one-handed gloved opening/closing, no need for screw caps or complex clips. SMARTSpin technology optimises acceleration, residual braking and residual load imbalance for maximum safety, regular analysis and reproducible separations. The pulse function saves time for short analyses. Intuitive controls and a large, bright LED display make operation easy. and  ...

Guttridge fully automatic powder filling line Consists of Easyflo screw elevator conveyor with vibratory sieve that directly fills a 50Kg stainless auger filler, 300g - 4000g weight range, suitable for filling pouches / tubs / cans, brand new touch screen plc controls, height adjustable frame, with infeed conveyor, 1Ph

Overview This SIDEL blow moulder and KHS filling monobloc were both manufactured in 1999. They are still in production until the end of October and can be viewed in person. Technical Details Blow moulder | SIDEL | SBO 18 Series 2 | 1999 Current capacity: 23.400 bph in 1.25L Working hours: 40.000                   Number of moulds: 18            Moulds type: Shell type quick change Formats produced: 1.25L Bottles: Cylindrical petaloid base Oven type: Sidel Neck personalization: PCO 1881  Type of preforms: with recycled PET resin Machine was regularly maintained     Machine equipped with:                     Sidel preform tipper Sidel hopper with cover & feeder Sidel preforms unscrambler Sidel preforms infeed rail Blowing station for 18 moulds Sidel electrical cabinet with Siemens Sidel PCC drive & control Lanfranchi bottles buffer storag ...

Complete Automatic Line Packaging Trays. Composed by: - Interlocking Cardboard Tray Former Model Vara Year of Construction 1992 - Belt conveyor elevator for multi-head weigher - A304 stainless steel vibrating screen - Linear Multihead Weigher 10 Heads Opem Inox A304 Year of Construction 1992 With Base - A304 Stainless Steel Flow Pack Packaging Line Conveyor Belts - Technopack Flow Pack packaging machine Year of construction 2001 Max Speed 60 Pcs / min. 10.4 Double Coil Automatic Exchange Touch Screen Panel.

Peeling set, consisting of: - Raft with elevator For semi-floating product reception and subsequent elevation. - INOX steel hopper, polypropylene mesh elevator with A-250 buckets and INOX recirculation pump. - Lung hopper for peeler For accumulation of product in the load of the peeler by abrasion, it has level detectors and general construction in AISI-304 Stainless Steel - Abrasive peeler - Vertical peeler, suitable for fresh or scalded products, using drum abrasives. Load capacity: 25kg Documentation available

Vegetable cutting and washing line consisting of: Product elevator by means of plastic belt with buckets. Dimensions: 2740 x 200mm useful Model: EV-2740X200 Cutting, slicing and dicing machine for vegetables (potatoes in its last application) with continuous working system for uninterrupted production. Three-dimensional cuts that have four corrugated surfaces and smooth cuts of a variety of fruits and vegetables. Accepts a maximum product feed of up to 5.5 (140 mm) in any dimension. Cuts cubes or smooth or corrugated strips, three-dimensional cuts that have four corrugated surfaces and smooth cuts of a variety of fruits and vegetables. Slices: 1/16 - 3/4 (1.6 - 19.1 mm) Cubing: A combination of the slicing blade, crosscutting blade arbor and circular blade arbor is used for dicing. Changing the size of the cubes is done by using the necessary cutting spindles and adjustin ...

Vegetable and fruit puree line, with a production of 2000kg/day (6h). Composed of: Slicer URBASA brand model Q908.010 built in stainless steel AISI 304, with stainless steel blades. 1,5kW MARRODAN model PR32318 B/T elevator with scalder feed. With PVC/Polyurethane belt 3C 500 with cleats. total length: 3000mm useful width: 500mm power: 0,37kW MARRODAN linear mesh scalder model PR32217, for vegetable products. The regulation of the scalding/hydration system is made by a temperature controller connected to a PT100 probe. The feed speed is regulated by a frequency inverter. Basic construction in Stainless Steel AISI 304 Polypropylene mesh type A-1061mm Total installed power: 4,7kW Group of 2 pulpers/pulpers and 250 lts heated tanks for mixing and cooking. INOXPA centrifugal pump model HYGINOX SE made entirely of stainless steel, driving the product to the exchanger ...

Vegetable cutting and washing line Line composed of: Product elevator using plastic belt with buckets Dimensions: 2740 x 200mm useful Brand: T.PACK S.L Model: EV-2740X200 Year 2005 Cutter, slicer and dicer for vegetables (potatoes in its last application) with a continuous work system for uninterrupted production. three-dimensional cuts that have four wavy surfaces and smooth cuts of a variety of fruits and vegetables. Accepts a maximum product feed of up to 5.5 (140mm) in any dimension. Makes smooth or wavy dice or strip cuts, three-dimensional cuts that have four wavy surfaces, and smooth cuts of a wide variety of fruits and vegetables. Slices: 1/16 – 3/4 (1.6 – 19.1 mm) Dicing: A combination of the slicing blade, cross blade arbor and circular blade arbor is used for dicing. Changing the size of the cubes is done by using the necessary cutting spindles and adjust ...

Belt press POWERPRESS 400 is designed for pressing fruit, berry and vegetable mass. Fruit mass is placed on the belt which presses it against cylinders + Fruit and Vegetable Washer Elevator Mill MAXIMILL 1000. # Pour jus de pomme, jus de raison, jus dorange, jus de poire, jus dananas, etc. The obtained juice flows in the collection tray under the press. The pressing process is continuous. Capacity: 400 kg/h The most evolutionary feature of our Belt press POWERPRESS line is integrated pump and juice collection tank into the press itself. That means that you save money and do not need an additional juice collection tank and pump which otherwise would use much space and money. There is a filtration sieve integrated into the juice collection tank. Because of that the belt press 400 filtrates the juice even during the pressing stage providing cleaner and more pure product. Bel ...

The Discaf 120-180 kg coffee roaster 2 vaccum Paris T16 packing machines (1 kg, 125g and 250g with the possibility of converting the forming tubes to other weights) Other parts such as: , elevators, mixer, Z-type feeder, etc. http://menparis/en/machinery/t-16-fully-automatic-packaging-machine/ https://www.discaf/mixted-industrial-coffee-roasters-TF-120-300.html

Coffee maker / Coffee maker DISCAF TF-120 Charge / hopper 120-180 kg MIXTED ROASTER TF-120 Machine with a capacity of 120 kg for batch, for to roast automatically the coffee and nuts. Equipment: Load chute. Pneumatic register. Internal drum with motor. Outer drum isolated Swing-bohter triggered through pneumatic cylinder. Pneumatic control box. Smoke aspiration fan. Combustion chamber Husk cyclon. COOLER Coffee cooler, manufactured in stainless steel and with the following elements: Entry hopper. Receiving cylinder. Internal remove blades. Support cylinder. Transmission through motor. Lids with rapid opening closes to facilitate his cleanliness. Inferior trays for the residues captation. Ventilating aspiration. Exit hopper. VERTICAL AUGER FEED ELEVATOR Auger feed elevator. Manufactured in stainless steel and with the following elements: Hop ...

IR-12 Coffee roaster manufactured by Diedrich 12kg capacity per batch 70 tons flawlessly roasted on this machine since it was put in service in 2021 External chaff collector 6 data package (4 temperature probes, airflow and gas changes automatically logged in softwares like Cropster) Custom made oversized chaff bucket Machine not in production anymore since the summer 2023 Inspection possible Find our other announcements by clicking on the machine list in our dealer profile

Used Elopak Forming and Filling Line for Liquid Soap up to 4200 Cartons h The Used forming and filling line Elopak for liquide soap up to 4200 cartons h stands as a testament to reliability and performance for discerning industry professionals Operational Status and Technical Features Currently housed in storage this line accommodates bottle formats ranging from 0 25 L to 1 0 L offering essential versatility in packaging solutions Furthermore its fill type based on weight ensures accuracy throughout the filling process Details on the Filling Machine The Elopack liquid Soap line boasts a standard A Style configuration manufactured in 1995 with a subsequent capper upgrade in 2007 Despite lacking a CE certificate meticulous testing and thorough cleaning have rendered it in optimal working condition Performance and Key Features of the Elopack liquid Soap line Capable of processing up to 4 20 ...

Cork elevator with cork orientation More then 300 machines new and second hand on our seema .de

Nova rotary conditioner R16 year 2017 very good condition fully faired equipped with tray for pots diam 95 pot unstacking function, dosing filling by piston, heat sealing possibility of filling buckets on the machine table CIP cleaning planned on schedule - machine dimensions: 940x1375x1807 (excl. tot 2246 with pot unstacker) - capacity/h: 1000 pots/h 500g pots - possible volumes 100g 125g 250g 400g 500g diameter 95 + buckets 5l 10l… - weight 500 kg - motor power: installed power 1.5KW power supply 400V3P+N+T 50Hz head disconnector: 12A minimum pressure: 6 bars max pressure: 7 bars average consumption: 14Nm3/h at 6 bars - very good condition machine from 2017 price excl. tax €59,000 - operation around 6 hours/week or around 1700 hours in total sin ...

Double Z-Kneader / Sigma Kneader / Bucket Kneader / Trough Kneader Topos - Made by Topos, built approx. 1960 - Refurbished in 2018 - Electric motor VEM 4 / 6 KW pole-switchable, for 2 speeds 1445 / 720 rpm, 11/12 A -Belt - 2 Z-shafts - All parts that come into contact with the product are made of stainless steel - Single-walled container approx. 700 x 760 x 500 mm = approx. 250 litres - Usable volume approx. 150 litres - Floor emptying - Weight approx. 1200 kg - Overall dimensions approx. 1400 x 1500 x 1700 mm - Very stable design and very good condition

- Running direction: Left - Right - Swivel upper part of the machine - One-head natural cork - Vacuum sealing - Single-head screw capper, with four-roller head, (28 x 44 mm) - With nitrogen injection before closing - A lot of bottle guide stars, for many formats! - Closure feeder belt elevator - Machine in TOP condition

fully hydraulic wheeled excavator Liebherr 912, built in 1986 4 times twin tyres. 70 KW 6 cylinder Deutz engine. Rideable on the road. Additional hydraulic connections for chisels. Device is operational. Equipment : trench bucket, bowl gripper, 3 normal spoons in different widths. Total weight 18 tons (can be driven on a low-loader)

Key data: 3000 mm, 500 mm, 480 mm

Offer Vertical machining center AXA VSC 2-3000 SMK built in 1996 with tool presetter cup Kalimat 250 + pico A1 Picture 1-10 The machining center is sold to our customer due to a business change. The customer must participate in the dismantling and loading by professionals. Indoor crane 8t is available. Manufacturer: AXA Maschinenbau Schöppingen Machine no.85506 Year of construction:1996 Running hours 21808 elect. X-axis stroke 3000mm /2 x 1000mm Y-axis stroke 500mm Z-axis stroke 480mm Spindle version SK 40 SMK changer for 30 tools Movable control panel with CNC path control Heidenhain TNC 407 right Switchboard Ball Roller Screw Measuring system Heidenhain Central lubrication unit Vogel Mini MFT Hydraulickapggregat Hydac Chip conveyor Connection 400/230 V, 63A Connected load: 28 kW Dimensions mm approx.: L 5010, W 2700, H 2900 ? Weight 6400 kg Accessor ...

Technical data approx.: - Load capacity 250 kg - E. chain hoist VETTER type SIXX2F - Lifting speeds 4 + 2 m/min - Projection approx. 4000 mm - Crane girder IPE 200 - Hook height approx. 2150 mm - Swivel radius 360° - Total height approx. 2780 mm - Stand area stand / bucket approx. 1050 x 1050 mm - Total length approx. 4600 mm - Total weight approx. 4200 kg

Heavy lift bucket 200 cm with Euro mount, Also other shots like Atlas, Avant, Bobcat, Cat, Claas, Deutz Fahr, Dieci, Faucheux, Genie, Giant, Hercules/Everun, JCB, John Deere, Kramer, Liebherr, Mailleux, Manitou, Merlo, Mustang, New Holland, Paus, Schäffer, SMS, Terex, Volvo, Weidemann, Zettelmeyer available!

We offer: Chiller Air-cooled chiller Climaserv GFC-F 260 ST 260 kW Cooling capacity in container outdoor standing on the roof The machine was used to cool the liquid circuit of the waste heat generated in the wallpaper production plant during the printing process. The system comes from a vinyl structure wallpaper manufacturer. The buyer is responsible for the dismantling, loading and transport from the specified location in the hall of the purchased machine. Costs: approx. 2500 € net.. Offer is outdated. Specifications Basic: Manufacturer: Geoclima S.r.l. Type: Climaserv GFC-F 260 ST Type of installation: Container on roof in the open air Series: CS 9010 Year of construction: 06/1999 Power consumption:101,5kW Rated Current:162.5A Starting Current:301A Max.Operating Current:225.5A Operating Current: 400V/50Hz/3~/PE Control current: 230-24V/50Hz/1~/PE Metric ...

Shelf Shelving System Spare Parts Warehouse High Rack, Storage Rack, Industrial Rack Used Manufacturer: GEMAC Spare parts warehouse over 3 walk-in levels with floors, elevator and office space approx. 25000 sheet metal shelves each approx. 400 x 1100 mm Shelf load: 80 kg Load max: 500 kg Field width: approx. 1100 mm Depth: approx. 400 and 800 mm Shelf height approx. 1800 mm The plant is currently being dismantled

Ident-Nr.: CAT0906MKH6603880 Weight: 5600 kg bucket: 1 CBM : Stunden : 80 % quick coupler: Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Mini excavator, Manufacturer: KOBELCO, Type: SK 55 SRX-6, Year of manufacture: 2019, Fuel: Diesel, Total weight (kg): 5,850, Read operating hours (h): 2,172, Vehicle identification no.: R05734, 1 bucket package, consisting of: 1 ditch cleaning bucket approx. 140cm, 2 backhoe buckets approx. 45/50cm, radio, advertising foiling, damage: all around Traces of use

Mini excavator, Manufacturer: KOBELCO, Type: SK19, Year of manufacture: 2021, Fuel: Diesel, Total weight (kg): 2,300, Operating hours read (h): 579, Vehicle identification no.: 21703525, Chassis adjustable in width, 1 bucket package, consisting of: 1 ditch cleaning bucket approx. 100 cm, 2 backhoe buckets approx. 40/60 cm, Advertising foiling, Damage: all around Traces of use

Offer 1 mixing container Böllhoff stainless steel 250 l D=85 x165cm with lid, Basic emptying + device for level measurement Fig. 1-5 ! Please do not ask for scrap recycling. Capacity: 250 l Diameter: approx. 60cm Height: approx. 90 cm The plant is still located at the site in Halle Saale. It is sold ex works EXW. The plant was used to store/mix paints for the paint shops. The facility is empty. 1 mixing container Böllhoff stainless steel 500l D=85 x165cm + level measurement photo 6-8 VB 490 € also agitator + 190 € VB and 7 paint mixing buckets agitator tank Drais 300 l steel very stable rollable VP 1990 € without photo Compressed air technology such as: -Compressed air system Kaeser Kompressor.SC 121, dryer DC 75E and.. Plastics technology such as: • 9 injection moulds for the production of castors for furniture and accessories Metalworki ...

wheel loader, manufacturer: KRAMER, type: 5065, year of manufacture: 2022, fuel: diesel, KW: 34.3, total weight (kg): 4,500, read operating hours (h): 210, vehicle identification no.: 349040715, 1 grab bucket KRAMER 10000275259, serial number: IXS10_26_22_003, width: approx. 165 cm, weight: 464 kg, 1 pallet fork WACKER NEUSON, Damage: all around Traces of use

Offer 1 mixing tank Böllhoff stainless steel 500l D=85 x165cm + level measurement Foti 1-8 ! Please do not ask for scrap recycling. The plant is still located at the site in Halle Saale. It is sold ex works EXW. The plant was used for storing/mixing paints for the paint shops. The facility is empty. It consists of the following technical components: Container Manufacturer: Böllhoff Verfahrenstechnik Type: Storage tank 500 liters Year of construction: verm. 1991/92 Dimensions: approx. D = 85 x 165 cm Dimensions container inside: D=80x108 with Level measurement probably VEGA 10702.20 Capacitive Probe Level Indicator Vega with Stainless steel connection In addition to the tank, there is a separate lid with a geared motor for an agitator, see photos. Surcharge 190 € Manufacturer of transmission motor: Greifenberger Antriebstechnik Markredewitz Engi ...