134,663 used machines on RESALE, but how to find them? Machine Search
axial fan, fan, extraction, fan wheel, fan blade, fan blades, blade fan impeller -Manufacturer: Multi Wing, wing fan impeller 4-blade fixed pitch -Diameter: 400 mm -Hole: Ø 19 x 40 mm -Quantity: 1x fan wheel available -Dimensions: Ø 400 x 75 mm -Weight: 0.7 kg
Complete BOSCH line for sterile ampoules filling under isolator Production: 400 ampoules per minute working range • Diameter : From 9 up to 30 mm • Height : From 60 up to 160 mm • Formats incluided :1 - 2ml The machine comes with ISOLATOR and DEDICATE AHU AND CIP/ SIP IPC (weigh control ampoules)
Ref. -No.: 10369 Manufacturer: MONFORTS Year of construction: 2005 Type of control: CNC Control: MTCK/Euro Turn Storage location: Halberstadt X stroke: 450 mm Z - stroke: 3850 mm Centre Distance: 3970 mm Feed Capacity - Z: 20,7 kN Feed Capacity - X: 10,1 kN Rapid Travel Speed X-Axis: 4 m / min Rapid Travel Speed Z-Axis: 5 m / min Tailstock Quill Diameter: 125 mm Tailstock Quill Stroke: 200 mm Circumference diameter over slideway: 830 mm Circumferential diameter over radial slide: 540 mm spindle taper diameter: 140 (Metrisch) mm Quills Morse taper: MK6 Max swing diameter: 900 mm
Try square, locksmith square, hair square, precision hair square, control square -Manufacturer: Hommel, stop angle DIN 875/0 -Type: 600 x 400 mm -Accuracy level: 0 -Dimensions: 615/400/55 mm -Weight: 6.6 kg
Power supply unit, DIN rail power supply unit, switching power supply unit -Manufacturer: Block, DIN rail power supply -Type: PVSB 400/24-40 -Input: 400-500 VAC/50-60 Hz/2.2-1.8 A -Output: 24 V 40 A -Dimensions: 205/130/H130 mm -Weight: 3.1 kg
Linear bearing, linear rail, linear guide, roller guide rail, guide carriage, guide rail, roller carriage, electric carriage, linear carriage -Manufacturer: Afag, linear slide electric slide -Type: ES30-400 -Stroke_ 400 mm -Shaft: Ø 20 mm -Dimensions: 630/60/120 mm -Weight: 6.6 kg
Ref. -No.: 10313 Manufacturer: MONFORTS Year of construction: 2001 Type of control: CNC Control: EUROTURN Storage location: Halberstadt Country of origin: Deutschland Machine-No.: 164 01 Machine length: 6200 mm Machine width: 2110 mm Machine Height: 1995 mm Weight Of The Machine Ca.: 7,7 t X stroke: 450 mm Z - stroke: 3850 mm Chuck diameter: 315/400/500 mm Turning Diameter: 630 mm Turning Length: 3000 mm Centre Distance: 3985 mm Spindle Head: DIN 55027 - 11x290 Feed Capacity - Z: 23,9 kN Feed Capacity - X: 11,3 kN Rapid Travel Speed X-Axis: 4 m / min Rapid Travel Speed Z-Axis: 5 m / min Tailstock Quill Diameter: 125 mm Tailstock Quill Stroke: 200 mm Space requirement: 7500 x 3500 mm Circumferential diameter over radial slide: 540 mm mm spindle taper diameter: 140 mm Jaw chuck diameter: 400 mm jaw continuity: 102 mm Quills Morse taper: 6 Max swing diameter: 830 mm travel of the cross slid ...
SMO-4008-N QC12Y 8x4000 Hydraulic Press Brake Specifications - Maximum thickness of mild steel (PN-EN S235): up to 8.0 mm - Maximum working length: 4000 mm - Cutting angle: 1.5 - Strokes/minute: 8 - Kickback distance: 600 mm - Motor power: 11.0 kW - Length: 4800 mm - Width: 1800 mm - Height: 1950 mm - Total weight: 7300.0 kg Equipment - Backgauge driven by an electric motor (on ball screws) - Hydraulic sheet metal clamping over the entire working length - Blade spacing adjustment - Ball transfer units built into the table - Task lighting - Front supports - Mobile footswitch Rear ramps The rear ramp has been equipped with ball transfer units, so that shutdowns are never left on the machine. E21S Controller (Located on a swivel arm on the left side of the machine) - Backgauge control - 40 programs can be saved - up to 25 different steps in each program - R ...
Recon Part Number: SEV1X Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!
Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker -Tool cabinet: Steel cabinet with 4 shelves -Width: 935 mm -Depth: 400 mm -Height: 1950 mm -Door: lockable, without a lap -Weight: 78 kg
Power cables, extension cables -Extension cable: Length 25 m -Plug: Mennekes 13112 CEE plug 63 A 5-pin 400 V -Transport dimensions: Ø 600 x 190 mm -Weight: 26 kg
Quick-release nut for balancing machine, clamping nut -Manufacturer: Haweka, quick-release nut for balancing machine -Item No.: 143 403 003 -Suitable for: Haweka ProGrip clamping devices with 40 x 3 mm shaft -Quantity: 2x quick-release nuts included -Price: per piece -Dimensions: 290/92/H80 mm -Weight: 0.7 kg/pc.
TYPE = MODEL RS 4004 900/400/C Web width = 500 ÷ 950 mm Print width max. = 925 mm Printing cylinders with a surface width of 1000 mm can be installed. Raport = 500 - 1020 mm Max. mech. Speed 400 m/min 2 x Unwinder Auto Splice max. ø 1000 mm 1 x Rewinder Auto Splice max. ø 1300 mm Printing Rotogravure, series 4004 With trolleys 10 normal for axleless cylinders 2 norma and current printing units for cylinders with axes. Axisless printing units with three-phase drives Dryer : Thermal oil
Angle bracket, locksmith square, flat angle -Flat angle: Leg length 400 x 195 mm -Quantity: 1x flat angle available -Dimensions: 400/195/H10 mm -Weight: 2.2 kg
Power: 900 kVA Cooling: Water with front-mounted cooler Speed: 1500 1/min Generator: Stamford HCI 634G1 Voltage: 400/231 V, 50 Hz Tank: approx. 1100 liters Subject to prior sale - errors possible Internal Reference Number: E-1004-65
Key data: 400 mm, 1000 mm
Buzuluk 14231 CE conversion in 2010 Antifriction bearing Motor: 55 kW Motorized NIP adjustment Baseplate
Auxiliary power switch, circuit breaker, fuse, line switch, miniature circuit breaker, load break switch, terminal block -Manufacturer: wöhner, fuse-switch disconnector, load break switch -Type: FSD-NH2 -Number: 2x load break switches available -Price: per piece -Overall dimensions: 285/210/H145 mm -Weight: 3.7 kg/pc.
Hydraulic tank cap, tank cap -Hydraulic tank cover: from Atlantic ATS 3006 plate shear -Item No.: HMG 400 x 1 H -Dimensions: Ø 440 x 70 mm -Weight 14.5 kg
Cantilever racking, heavy-duty racking, single-sided cantilever racking, pallet racking -Cantilever rack: two-sided, height 4000 mm -Stands: 5x 340/150/H4000 mm / 350/300/3400 mm -Cantilever arms: 70 pieces 140/140/1500 mm -Cross braces: 124 pieces 60/40/1350 mm -Submission/Price: complete -Weight: 4100 kg
Tires, solid rubber tires, forklift tires, solid rubber bandages, solid rubber elastic bandages -Solid rubber tires: Solid rubber wheel, solid rubber bandage -Tire size: Ø 400 mm -Inner diameter: 276 mm -Quantity: 20 tires available -Price: per piece -Dimensions: Ø 400 x 78 mm -Weight: 5 kg/pc.
Key data: 1020 mm, 510 mm, 610 mm
Inv. Num. : 6222 Type: BMC 4020 Producer: HURCO Created: 2000 Parameters: Control system: UNIMAX Operating hours: 59,600 h Work table length: 1220 mm Work table width: 510 mm Minimum vertical spindle speed: 80 1/min Maximum vertical spindle speed: 8000 1/min X-axis travel: 1020 mm Y-axis travel: 510 mm Z-axis travel: 610 mm Spindle power: 15 kW Maximum tool weight: 682 kg Max. tool weight: 7 kg Machine height: 2670 mm Machine length: 3350 mm Machine width: 2320 mm Machine weight: 5600 kg Equipment: Tool clamping 2015: Spindle change
4000 x 2000mm 10KW Fiber laser / 10,000w Fiber laser
Used HAPPLE control screen sieve machine in good condition Screen basket 400 x 1000 mm n=270 rpm, with spare sieving basket Power 4 kw
Impact protection, crash protection, shelf protection, column protection, column impact protection, shelf impact protection, corner crash protection -Impact protection: Shelf impact protection, corner bumper protection -Type: L-shape -Height: 400 mm -Quantity: 1 piece available -Dimensions: 305/145/H400 mm -Weight: 5.4 kg
Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 3 kW -Grinding discs: Ø 400 mm -Operating voltage: 380 volts -Weight: 200 kg
Steam turbine Siemens SST400 Year: 2011 Disassembled and put in a storage. Very low working hours. Power:30mW Voltage:10.5kV/50Hz Fuel: Biomass Generator: SGen5-100A-4P Turbo gear unit Flender-Graffenstaden TX80/3 Transformer Siemens S10-40000/110 Condenser Full set of manual books No boilers, no voltage control cabinet (7) Steam turbine Siemens SST-400 Year: 2011 Never used and never installed. Still in original wooden crates. Packing lists. 7 sets available Power:30mW Voltage:10.5kV/50Hz Fuel: Biomass Generator: SGen5-100A-4P Control system Accessories Full set of manual books No boilers Price: on request
Pneumatic cylinders -Stroke travel: 40 mm -Piston diameter: 50 mm -Piston rod: 20 mm (connection M 8 x1.5 thread) -Total length: 80 mm -Total length extended: 120 mm -Air inlet and outlet: adjustable -Quantity: 18 pieces available
Cross table, cross-sliding table, clamping table, clamping plate with T-slots, clamping angle -Cross table for lid type: KF12 -Table surface: 400 x 400 mm -Travel path: x 50 mm/y 65 mm -Weight: 60 kg
Conveyor belt, belt conveyor, transport belt, belt conveyor, chain conveyor -Drive geared motor: 0.37 kW -Belt widths: 15 mm -Length: 400 mm -Adjustable speed: 14-56 m/min -Number: 2x conveyors available Price: per piece -Weight per piece: 88 kg
7electrical transformer 1200 kva ,630 kva 400kva 1600 kva HIGH VOLTAGE 1-2 5381V 2-3 5250V 3-4 5118V
bore capacity in steel (diameter): 40 mm throat: 330 mm bore stroke: 190 mm spindle taper MT: 4 MK table:: 500 x 400 mm column diameter: 140 mm turning speeds: 90 - 1500 U/min total power requirement: 2,2 kW weight of the machine ca.: 435 kg. range L-W-H: 570 x 930 x 2170 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CIRCULAR SAW model SCM SI 400 EP CLASS with CNC-controlled 3-axis ( blade lifting, blade inclination, motorized parallel guide ) with scoring unit EASY CNC electronic control CE regulations : YES with Instruction Manual and CE declaration conditions of use: excellent volts.380/50 Electronic control: manual, semi-automatic and automatic management modes - operator interface with clear and professional graphics 7 inch "Wide screen" color display for precise cutting of furniture, custom-made furnishings, kitchens, panels, doors, frames, composite materials, aluminum and various materials Composition: Sliding carriage in extruded aluminum with large section, rigid and with closed reticular structure for maximum resistance Anodized and hardened surface for maximum wear resistance Ground prismatic guides Worktop complete with extensions, it is made entirely of cast iron ...
PTO adapter, PTO shaft, profile shaft -double-sided toothed -1 Toothed design: Ø 35 x 105 mm -2 Toothed design: Ø 42 x 150 mm -Total length: 405 mm -Number: 21x waves available -Price: per piece -Weight: 4 kg/piece
Clamping plate, welding table, welding table, marking plate -Width: 450 mm -Length: 400 mm -Height: 50 -with fitting bore and threaded holes: M12 (threaded insert M16 x 1.5) -Weight: 60 kg
Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Motor: 0.23 kW 18000 rpm at 300 Hz -Shaft mounting: Ø 15 mm L 25 mm -Number: 5x motors available -Price: per piece -Dimensions: 200/70/H90 mm -Weight: 2 kg
End mill, shank mill, milling cutter -Four-cutter -Roughing end mill -Diameter: 32 mm -Usable length: 40 mm -Corner radius: 4 mm -Type: HSSE -Quantity: 17 pieces -Sale: only complete set -Weight: 10 kg
Key data: 400 mm, 150 mm, 22 kW
I am selling an industrial planer LEDINEK ROTOLES 400 D-S. Built in 2001. Max. working width 400mm Max. working height 2-150mm Min. element length 150mm Max. material take-off 8mm Rotating Shaft 48 Knife Feed speed 10-45 m/min. Motorized thickness adjustment with digital display. Diameter of the extraction hood 200 mm (30m/sec. required) Main spindle motor 22.0 KW. Feed motor 3.0 KW. Total power 26 KW. Total weight 1800kg. European product, manufactured in the EU, with CE certificate and instructions for use. Machine in stock in Kežmarok, Slovakia, possibility to test.
Refrigeration unit Bitzer 4JE-15Y-40P for TK or Plus cooling Year of manufacture 2022, like new Displacement: 63.5m3/h 33 Kw cooling capacity at minus 10°C 13 KW at minus 30°C 11 kw./15 hp. Electrical power, Amp.30.8 Refrigerants 404a, 449a, 448a, 452a,134a etc.
Sulzer ZAL 40S Cylinder heads complete Latest high output model without cracks or weldings water pressure tested
Pipe clamping system, clamps for butt welding machine, butt welding machine, mirror welding machine, pipe welding machine, assembly device for pipes -Capacity: 100-400 mm -Double clamping device: for pipe mounting -Dimensions: 1000/450/H260 mm -Weight: 22 kg
Roller conveyor, conveyor belt, roller track -Roller width: 400 mm -Conveyor length: 2000 mm -Roller diameter: 50 mm -Central spacing: 100 mm -Height: 300 mm -driven: via flat belt -without: flat belts -Dimensions: 2000/520/H300 mm -Weight: 90 kg
frequency monitor, speed and frequency monitor, frequency monitoring, frequency monitoring -Type: FW4-2-120-400-1 -Un: 120 VAC -Fn: 400 Hz -Number: 1x frequency monitors available -Price: per piece -Weight: 0.8 kg
Control: Fanuc 16MB Max.travel range: X 1300 mm Y 800 mm Z 635 mm Clamping table: 1440 x 860 mm Spindle speed ? 4500 - 80000 rpm Taper ? HSK25 Tool changer ? 12 positon Automation: Erowa Easy changer XT for 4 UPC pallets, Robot.Made in Switzerland
Control: Fanuc 16MB Max.travel range: X 1300 mm Y 800 mm Z 635 mm Clamping table: 1440 x 860 mm Spindle speed ? 4500 - 80000 rpm Taper ? HSK25 Tool changer ? 12 positon Automation: Erowa Easy changer XT for 4 UPC pallets; Robot Made in Switzerland
Inductive sensor, electronic sensor -Manufacturer: IFM -Product Type: GM5002 GIMC-4015-US -Quantity: 2 available -Price: per piece -Weight: 0.2 kg
NH fuse switch disconnector -NH2-400 A -500 V-630 A-AC22 B -690 V-630 A-AC-21B -Dimensions: 100/660/H190 mm -Weight: 5 kg
TGW curves roller conveyors 45° left Order no. 150072 Item 03.0721 year of manufacture: 2012- working width: 345 mm plastic rollers working width: 400 mm metal rollers total width: 480 mm inner radius: 1050 mm speed: 0.45 m / sec lateral guide on both sides Rollers: conical plastic molded rollers: Metal Optional: 3 supports Shipping dimensions: Lxwxh 2200 x 800 x 400 mm: 90 kg Features: Running direction: LEFT Construction year: 2012 condition: very good (used) Nominal / outside width in mm: 480 Roll width in mm: 345 angle: 45° Driven: YES Engine type: SEW Eurodrive Conveyor speed m / s: 0,45 scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf v ...
KALTENBACH KKS 400 NA automatic circular sawing machine built in Germany is used for the precise, fully automatic cutting of flat bars, angle bars, profiles and tubes. The machine uses a reliable drive with hardened and ground helical gears, which, in combination with the electronic cutting height adjustment and the fast reverse movement of the cutting disc, ensures smooth operation and short cutting times, even during the most demanding processing. A large workspace with a clamping element stiffens the material during cutting, ensuring that the workpiece is held firmly and securely on both sides of the 400 mm diameter blade. The KALTENBACH circular sawing machine is offered with, among others, a material feeder, chip conveyor and convenient to use PLC control. Technical data of the KALTENBACH KKS 400 NA circular sawing machine - PLC control - machinable materials: steel, stainless ...
maximum number of results exceeded
please refine your search
