bt 40 used for sale

Ventilation duct, ventilation flap, ventilation system, dust extraction, extraction system, ventilation ducts and fittings, canvas nozzle-flexible connection -Ventilation duct: elastic connection -Inside: Ø 400 mm -Flange: Ø 463 mm / bolt circle Ø 438 mm -Hose length: 155 mm -Weight: 2,6 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: Orsta, hydraulic cylinder type R1-63 / 40x1000 -Stroke: 1000 mm -Piston rod: Ø 40 mm / thread Ø24 x 16 mm -Mounting hole: Ø40 x 40 mm -Cylinder: outside Ø 72 mm -Dimensions: 1260/100 / H90 mm -Weight: 26 kg

Double bench grinder, bench grinder, column grinder, column grinder -Manufacturer: Cordia, double bench grinder type DOS 400 -Motor power: 2.2 kW -Speed: 1500 rpm -Grinding disks: Ø 400 x 50 mm -Operating voltage: 380 volts -Dimensions: 590/690/H1080 mm -Weight: 246 kg

Used BOSCH GKF 400S capsule machine. New 1999. The device is technically efficient, very little used. Equipment dedicated to #0 capsules Areas of application of the GKF device: - Depending on the execution method, the GKF 400 capsule filling and closing device is used to fill capsules with powders, granules. - The machine is designed for a maximum throughput of 400 capsules per minute. The device was used in the GMP area. Made of stainless steel. Simple operation, very simple maintenance.

Pipe sealing cushions, leak sealing cushions, sealing plate, pipe sealing, breakthrough sealing -Pipe sealing cushions -Outer/inner diameter: 495/403 mm -Height: 20 mm -Hole circle: Ø 445/14 mm -Delivery of: steel/stainless steel cover plates possible -Number: 8x pillows available -Price: per piece -Weight: 1.5 kg/piece

Turning tool holder, tool holder, turning tool, turning tool holder, tool holder, axial tool holder -different recordings: 10 -from: WNT-Mastertool -Sale: only complete -Price: complete -Weight: 36 kg

Box column drill Alzstar 40S 16 A 380 V Speed 160 - 2250 rpm Length 1 m Width 0.80 m Height 1.80 m Weight 270 kg Work lamp Color: White

Inv. Num. : 6701 Type: 4000 kN Producer: Hydraulico Created: 1977 Parameters: Control system: SIEMENS SIMATIC OP Compressive force: 4000 kN Stroke: 800 mm Table height: 680 mm

Ventilation duct, ventilation flap, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings, louver damper, pressure relief damper -Lucoma: Pressure relief valve DRK 370 x 405 mm -Dimensions: 370/405/165 mm -Weight: 5.3 kg

Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool as: die -Thickness: 25/13 mm -Drawing: with the pictures -Total length: 400 mm -Total height: 99 mm -Price: per piece -Number: 2 pieces -Weight: 9.7 kg

Centrifugal fan, dust extractor fan, fan, extractor, dust fan -Motor power: 3 kW -Voltage: 380/660 V -Speed: 2870 rpm -Volume flow: m³/h -Connection input: Ø 310 mm -Connection output: 400 x 200 mm -Dimensions: 1000/680/H1030 mm -Weight: 254 kg

Kitzinger crate dishwasher / instantaneous dishwasher - Type: Contino 400NDB1 - Year of construction: 2007 - Bandwidth approx. 70cm - Height entrance: 53cm - Total length: 685cm

Nibbel, stamping and forming center with C frame (C – Frame stress-free annealed before mechanical processing – 15-year warranty on freedom from cracking) All with one machine: Nibbling – Stamping – Forming – Embossing – Tapping – Marking – Deburring Servo-electric punch head drive - up to 950 strokes per minute, adjustable depending on the material feed speed. Maximum punching force 300 kN Maximum sheet thickness 6.5 mm Largest workpiece weight 200 kg Machining area 1,500 mm x 4,000 mm (with repositioning up to 8,000 mm) Punching head with FANUC® drive - Programmable: - Punching stroke - Punching depth - Punching speed and - Stamping tool acceleration Tool magazine for 15 pieces up to optionally 150 pieces indexable tools Indexing accuracy 0.01° On request, the machine can be supplied with a TRUMPF® tool system Patented vertical tool magazine ...

Adjustable crossbeam, crane crossbeam, crossbeam for pillar jib crane, indoor crane, workplace crane, chain hoist -Traverse for: the transport of different loads -Load capacity: 8000 kg -Dimensions: 4070/230/H770 mm -Own weight: 715 kg

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Iveco FPT Engine: C13TE2F Engine No.: 284948 Power: 377 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Stamford AvK Generator type: S 4 L 1 D - F 41 Gene. No.: N 22J425396 Generator power: 400 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Manual & remote start Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 600 Dimensions of the power unit: Width approx. mm: 1.620 Height approx. mm: 2.295 L ...

Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, Telescopic rails, pull-out rails, heavy-duty pull-outs -Length retracted: 400 mm -Length extended: 695 mm -Width: 15 mm/height: 42 mm -Price: per pair (left right) -Number: 12x pairs available -Weight: 1.95 kg

Number of spindles: 6 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 5-30 m/min. Weinig Powermat 400 with HSK/Powerlock, axial/radial CNC controlled ---------------------------------------------------------------------- - Short summary: ---------------------------------------------------------------------- - 6 spindles with 8,000 rpm 5 x HSK/Powerlock Axial and radial CNC adjustment of the spindles via control CNC - controlled adjustment and positioning of the feed Detailed description: ---------------------------------------------------------------------- - Technical specifications: Working width: 20-230 mm Working height: 8-120 mm Number of spindles: 6 1. Tool holder - below ------------------------------------------------ Motor with brake: 5.5 kW Spindle diameter: 40mm Speed: 6,000 rpm Tool flight circle: 93 - 160 mm ...

NC – controlled precision rotary table face grinding machine with vertical grinding spindle and cup grinding wheel - brand new Rotary table diameter 400 mm Largest grindable diameter 400 mm Rotary table speeds 0 to 50 rpm infinitely variable Maximum workpiece weight 75 kg Cup grinding wheel Ø 200 mm x H 80 mm Grinding wheel speed 280 to 2,800 rpm infinitely variable Maximum workpiece height 170 mm Smallest programmable infeed dimension of the grinding wheel 0.001 mm Grinding wheel drive power 3 kW Rotary table drive power 0.5 kW Weight approx. 650 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 80 mm -Piston diameter: 32 mm -Piston rod: 12 mm -Price: per piece -Number: 2 pieces -Dimensions: 225/47/H47 mm -Weight: 0.85 kg/piece

Min. 90x130mm, Max. 320x480mm, Capacity: 14000 Cycles/Hour, 6 Feeder Stations, 3x DVU 400 Vertical Feeder, 3x DHU 400 Feeders, 1x CHU 450 Cover Feeder, Stiching Unit ST 400 with 2 Stiching Heads, Three Knife Trimmer TR400 with Stacker Delivery

Bitzer compressors, compressors, type 6F-40.2Y-40P

length: mm height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Pulse welder Hybrid 4002 Year of manufacture 2005 Feeding device / 4 rolls wire feed DV 39 machine no.: 940 16 222 - Welding hose 4000mm - Ground cable 70 square 5000mm - Intermediate hose package approx. 4000mm - Hose package Binzel MB511 Pulse current The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Demolition hammer, chisel hammer, Bosch hammer, mortising hammer -Length: 400 mm -Price: per piece -Number: 5 pieces -Dimensions: 400/33/H33 mm -Weight: 1.6 kg/piece

Face plate, face plate chuck, four-jaw chuck -Manufacturer: FUP -Type: PUUf-M400C6ZJ -Chuck size: Ø 400 mm -Short taper mount for: bayonet disc -Short taper size: 6 -Short cone diameter: 106.375 mm -Hole circle: Ø 133.4 mm -Number: 2x available -Price: per piece -Weight: 57 kg

Face plate, face plate chuck, four-jaw chuck -Chuck size: Ø 400 mm -Taper holder short taper: 6 -Weight: 66.5 kg

Faceplate, faceplate chuck, four-jaw chuck -Hole size: Ø 408 mm -Mounting thread: M95 x 6 mm -Weight: 52 kg

I sell a heavy briquetting press RUF RB400. Year of construction 11/2012 Engine power 22kW Productivity Number 400 pcs. Wood briquettes / hour Wood briquette RUF 150 x 60 x 40-110mm (Depends on material) Material moisture up to 15% Nominal pressure 14200 N/cm2 Oil cooler included. Dimensions: 3000 x 1800 x 2000 mm Combined weight 3000kg Equipment on the right - right entrance box. Condition after full remont/500Mtstd warranty as new. Available right away. With full documentation and CE.

Starter Bosch -Bosch type: 0 001 368 616 -Voltage: 24 V -Teeth: 9 -Dimensions: 370/125/H170 mm -Weight: 16 kg

Double hydraulic pump, oil pump, gear pump -Kracht: gear feed pump -without: drive -with: clutch bell for the drive -Dimensions: 490/250/H345 mm -Weight: 19 kg

Used greenhouse lighting, manufacturer: DH-Licht, model MGR-K 400-CHD, for sale by bid

Refrigerant compressors system Bitzer Type: 4CES-6Y-40S (x3) Volume: 32.5 m3/h (3x) Cooling capacity for R404A: 63 kW at -5°C/40°C, 52 kW at -10°C/40°C, 27 kW at -25°C/40°C Pieces in stock: 12 Reference number: Z 54 Condition: Used Price on request, We have many other equipment : Bitzer, Copeland, Frascold, Lunite, Kueba, Guentner, Eco, Alfa-Laval, Goedhart, Helpman

Sandpaper, emery paper, abrasive cloth, sanding discs, grinding wheels -Outer diameter: 400 mm -Width: 100 mm -Inside diameter: 280 mm -EKW46/3/-K5-V30KE DCW -Price: per piece -Number: 1 pieces -Weight: 14 kg

Sandpaper, emery paper, abrasive cloth, sanding discs, grinding wheels -Outer diameter: 405 mm -Width: 50 mm -Inside diameter: 203 mm -Weight: 10.5 kg

current intensivity: 400 A weight of the machine ca.: 125 kg dimensions of the machine ca.: 470x1025x865 mm min. current voltage (V) 400 max. current voltage (V) 400 min. Welding current intensity (A) 10 max. welding current intensity (A) 400 Fuse protection 25 IP protection class 23 Insulation class H The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

4000 x 2000mm 10000w / 10KW FIBER laser

Pipe sealing bag, leak sealing bag, sealing plate, pipe sealing -Pipe sealing cushions -Outside/inside: Ø 400/323 mm -Height: 58 mm -Number: 2x pillows available -Price: per piece -Weight: 6.7 kg/piece

Angle for filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -Connection: 460 x 400 mm -Material: sheet steel -Dimensions: 765/440/H630 mm -Weight: 12 kg

Clamping plate, plate field, welding table, welding table, plate boring mill, straightening plate, tool holder -with: holes -Width: 400 mm -Length: 500 mm -Height: 30 mm -Weight: 45 kg

4000 x 2000mm 6000w / 6 KW FIBER

Brush machine Wandres type Ingromat Cleaner CF04/400 Specifications: • Working width (mm): 400 • Brush: top and bottom • Spraying device

Three knife trimmer Stitching heads (x 4) Omega stitching heads (x 2) Feeder (x 6) Stacker (Rima) Cover feeder

Pneumatic cylinders, air cylinders, pneumatic rams, air rams, round cylinders -Stroke: 400 mm -Piston diameter: 25 mm -Number: 2x available -Price: per piece -Dimensions: 580/28 mm -Weight: 0.7 kg/piece

Angle for filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -Connection: 460 x 400 mm/405 x 305, Ø 250 mm -Material: sheet steel -Dimensions: 1255/440/500 mm -Weight: 30 kg

Processing plant Manafacturer: Koruma (Nameplate missing) Type: Disho V160/400 Filling volume: 400 l Batch volume: 320 l no vacuum no double jacket with control cabinet, recirculation line & three-way valve LWH: 1500 x 1050 x 1550 mm

Belt delivery Vertical pile feeder (3x DVU 450) Three knife trimmer (TR 400) Feeder (3x DHU 450) Cover feeder (UFA 400)

Faceplate, faceplate chuck, four-jaw chuck, face turning chuck -Mouth size: Ø 400 mm -Cone size: 6 -Short cone mount for: bayonet disc -Short taper mount: Ø 106.375 mm -Bolt circle: Ø 133.4 mm -Through hole: Ø 90 mm -Weight: 51 kg

Clamping plate with T-slots, plate field, welding table, welding table, pallet changer -comes: from a CNC machining center -Width: 440 mm -Length: 400 mm -with: support ribs -with: instep index -Number: 2x plates available -Price: per piece -Weight: 74 kg

Micrometer, micrometer screw -Measuring range: 400 - 500 mm -Also other sizes: available -Weight: 8.7 kg

Control unit, control panel, control panel, control unit, keyboard, screen, control -Foot switch comes from a Trumpf punch type Sunimat 400 -Dimensions: 280/140/H150 mm -Weight: 4.4 kg

Polin Forno Wind4060 Oven Serial: 1104034 2011, stainless, electric oven, 10 trays with cooling rack underneath, adjustable temp and timer controls, 3Ph