bs used for sale

frequency: 50 Hz voltage: 380 V : 220 V connected load: 2,6 kVA rated current: 6,1 A weight of the machine ca.: 1 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 380 mm max. band length: 430 mm weight of the machine ca.: 0,5 t : : : Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

There are 3x Kaeser compressors, 2x Atlas Copco compressors and 3x Kaeser refrigeration dryers available. 1) Compressor Kaeser CS 75, year of manufacture: 1992, operating pressure: 10bar, operating hours: 38265h. 2) Compressor Kaeser AS 44, year of manufacture: 1999, operating pressure: 8.5bar, operating hours: 41564h. 3) Compressor Kaeser BS 60, year of manufacture: 1983, operating pressure: 7.5bar, operating hours: 50674h. 4) Compressor Atlas Copco GA 45, year of manufacture: 1990, operating pressure: 10bar, operating hours: 26831h. 5) Compressor Atlas Copco GA 45, year of manufacture: 1990, operating pressure: 10bar, operating hours: 52447h. 6) Refrigeration dryer Kaeser TD 51, year of manufacture: 1997, refrigerant: R22. 7) Refrigeration dryer Kaeser TF 171, year of manufacture: 2000, refrigerant: R134a. 8) Refrigeration dryer Kaeser TE 76, year of manufacture: 1996, refrigerant: R22 ...

-Tunnel opening approx. 400 x 200 mm. -Temperature adjustable up to 200 degrees -Transport speed adjustable up to 15 m/min. -The machine has 4 casters for moving and 4 separate adjustable feet for fixing. -220V/ 50 Hz/ 6.5 KW The machine has never been put into operation, so it is unused. The scope of delivery includes an operating manual with spare parts list and circuit diagram as well as 2 spare heating elements.

Paper vibrator with spreading rollers Baumann BSB 3/L, year of construction 1988, serial number 210277, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. Bobr Sbjh H Ivij Nwkedc You are welcome to visit the machine in our house by prior appointment.

The positions of the rotating tools are: T01-02-03-04 / T22-23 / T34-35 - equipped with Iemca Boss 332E/32 new in 2006 - lot of collets / guide bushes - MSC-501 Control - the machine has always worked with oil.

• Suppository production line for prefabricated plastic cast packaging • Working direction from right to left • Output max. 10,500 suppositories/h • Material of cast packaging PVC/PE, PS/PE, PVC/PVDC/PE • Dimensions of pouring packages: Container spacing 17.3 mm (pitch), container height 44-51 mm depending on format tools, standard version. • Casting packaging Roll material printed and unprinted, roll diam. 500 mm, pick-up diam. min. 100 mm • Available format parts for container heights 44 mm (1.1 g) and 51 mm (2 g) • Polystar 100 GE film sealing device for sealing the film ends • Contactor control • Drive 400V/50Hz Line consisting of: Filling machine Citopac SFD-10 CP • 2 filling stations, distance 17,3 mm • -osing range per filling point 0.5-3.5 ml • Dosing via heatable intermediate container 0.3 l and heatable tap head with rotary slide control (3 each a ...

This Eisele Waterpump BSD442, Can be used for the emptying and cleaning of pits, ponds, mine shafts and similar tasks,, for reducing ground water, pumping out water ballast from ships, on building sites, in, stone and gravel quarries and building material works., For municipalities and industrial concerns., , Throughput capacity: 100 m3/h, Max dirt passage: 19 mm, Max. head: 6 MWK, Max dirt passage: 1750 rpm, Weight: 1600 kg, , = More information =, , Year of manufacture: 1999, Applicable material: Water, Empty weight: 1.400 kg, Connector size: 4 inch, Technical condition: good, Visual appearance: good, Price: On request, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.n ...

Serie: 2070 Zaagbladdiameter: 500 mm Maximale snelheid: 2800 tpm Gewicht: 320 kg

FOR SALE: BRUDERER BSTA 50USL High-Speed Stamping Press With Automatic Strip Feeder BBV 190 500 kN | 100–1120 spm | Fully automatic | Top-tier Swiss quality Technical Highlights: Nominal force: 500 kN Stroke rate: 100–1120 strokes per minute Working hours: 41000 h Main motor: 22 kW Control voltage: 24V DC Power connection: 400V / 50Hz / 62 kVA Adjustable stroke: 16 / 19 / 25 / 32 / 38 /44 / 51 mm Shut height adjustment: 64 mm Working Dimensions: Max tool installation width: 1100 mm Strip pass width: up to 256 mm Ram area: 980 × 420 mm Table area: 1080 × 650 mm Strip entry height adjustable: 60–140 mm Max strip width: 120 mm Max feeding pitch: 85 mm Max material thickness: 4 mm Feeding angle: 180 Deg Machine Dimensions (with BBV 190): Machine footprint (L × W × H): 2407 × 1278 × 3150 mm Weight (approx.): 8,000 kg Equipment Includes: Feeder BBV 1 ...

Key data: 75 mm, 2000 mm

Demonstration article Condition: slight signs of wear BSM 75x2000 Two-stage belt sander with contact wheel diameter 196 mm and large surface grinding surface 75x530 mm. With automatic tension regulator for constant sanding belt tension. Specifications: Sanding belt width 75 mm Surface grinding surface 75x530 mm Sanding belt length 2000 mm Grinding speed 1: 14.5 / 2: 29 m/s Contact wheel diameter 196 mm Drive motor power 3000 W Mains connection 400/50 V/Hz Length 700 mm Width 490 mm Height 1130 mm Weight 72 kg Swivel range >90° Extraction diameter 100 mm Subject to prior sale

SUB: FOR SALE... CHRIS MARINE VALF SPINDLE GRINDING MACHINE AT TURKEY HAVE A GDY SIR WE VE 1 PC USED CHRIS MARINE VALF SPINDLE GRINDING MACHINE AT TURKEY TYPE BSP-2 NO. 463/204 DATA 3X 440V 60HZ IT WAS USED VERY LESS HOURS IF YOU HAVE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurlubay Regards; Aliaga marine services E-mail: infoaliagamarine.com PHN/fax: + 90 232 618 03 88 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY

Offer 25071 Specifications: - E.-Hydr. Lifting-lowering of the saw bracket - Saw blade dimensions 400 x 45 x 2.0 mm - Cutting range - 90° round approx. 250 mm - Flat approx. 250 x 130 mm - Square approx. 220 x 220 mm - Max. opening width of the vice 405 mm - Lifting speeds + cutting speeds adjustable - Mitre-adjustable vise - E.-Mot. Coolant Setup - Drive 380 V / 2.0 kW - Space requirement approx. W 550 x H 1270 x D 1700 mm - Weight approx. 380 kg

Swing-cut guillotine shears KÖLLSCHEN type BSK 2000/2Fabr. No. 69 1307 Year of construction 1969Cutting length 2000 mmCutting thickness 2 mmStand projection 90 mmWorking height 920 mmMains connection 380 volts, 50 HzEngine power 4 kW- Drive via geared motor with brake and crankshaft- mechanical sheet metal hold-down- manual back gauge 500 mm- stop adjustment via 2 handwheels, rear on the backgauge guide with measuring scale- front side stop left 720 mm- electric foot switch- manual

Rotary Brush Screen WESTFALIA BSB 200 Properties Type BOD 200 Machines No. 1 684 639 Total height 2500 mm Total length 600 mm Depth 600 mm Manufacturer: Westfalia Separator AG

Press capacity: 50 ton Ram stroke adjustable: 16 - 51 mm Slide adjustment: 78 mm Shut height (stroke down, adjustment up): 300 mm Table surface area : 930 x 590 mm Number of strokes: 620 - 1.120 s.p.m. Required power: 40 kW Dimensions L x W x H: 3.900 x 1.400 x 3.065 Weight of machine approx.: 9 ton

Control Siemens SINUMERIK 828D Rotary diameter. [mm] 378 Turning length [mm] 489 Workspace max. turning diameter 378mm max. machining length 489mm X-axis 205mm Z-axis 590mm Y-axis 110mm B-axis 590mm Main spindle Chuck diameter 210mm max. rod diameter 68mm Spindle bore diameter 76mm Drive power 11/18.5 kW max. torque 209.5 Nm max. speed 4,500 rpm Sub-spindle Chuck diameter 135mm max. rod diameter 36mm Spindle bore diameter 43mm Drive power 7.5/11 kW Max. torque 40.4 Nm max. speed 6,000 rpm Tool turret Number of tool stations 12 Tool holder BMT45 Powered Tools Yes max. speed 6,000 rpm

max. format 80 x 120 cm Year of construction 1992 Vibrating machine Spreading roller Flap stop on the left Air table Delivery date: immediately from stock Price on request. We supply and install worldwide.

width of the strips: 75.0 mm band length: 2000 mm band speed: 30.0 m/sek grinding width: 500 Plantisch mm suction capacity: 630 m³/h total power requirement: 3.75 kW weight of the machine ca.: 90.0 kg range L-W-H: 1100 x 550 x 1035 mm Furnishing : - High quality construction - The drive roller is crowned - This automatically centers the sanding belt in the middle of the roll - Fully vulcanized contact roller for the longest service life and the best possible smoothness - Tool-free and therefore faster, uncomplicated change of the sanding belt - Stepless height adjustment - for optimal adjustment of the belt sander to the user - Freely adjustable metal stop - for the optimal and safe guidance of workpieces Use of the large surface grinding area - Belt speed structurally optimized - thus a burning of the workpiece during processing can be largely excluded - Extraction equipped with rob ...

width of the strips: 150 mm band length: 2000 mm band speed: 30.0 m/sek grinding width: 500 Plantisch mm suction capacity: 630 m³/h total power requirement: 3.75 kW weight of the machine ca.: 100 kg range L-W-H: 1100 x 550 x 1035 mm Furnishing : - High quality construction - The drive roller is crowned - this automatically centers the sanding belt in the middle of the roll - Fully vulcanized contact roller for longest service life and smooth running - Tool-free and therefore faster, uncomplicated change of the sanding belt - Stepless height adjustment - for optimal adjustment of the belt sander to the user - Freely adjustable metal stop - for the optimal and safe guidance of workpieces Use of the large surface grinding area - Belt speed optimized in terms of design - thus burning the workpiece during processing can be largely excluded - Extraction equipped with robust and flexible ext ...

Inv. Num. : 8644 Type: BSL 204 Producer: Bäumer Created: 1983 Parameters: Max. workpiece dimensions: 2200 x 2200 x 1300 mm Equipment: Vacuum table New motor for the table drive New sensors New control panel GO spirals and nuts for vertical machine movement

Inv. Num. : 8647 Type: BS12 (AE) - III Producer: TSUGAMI Generated: Parameters: Control system: TSUGAMI MORU MSC 501 Side length: 170 mm Max. turning diameter: 3-12 mm Maximum spindle speed: 12000 1/min Spindle bore: 7 mm Weight: 2200 kg Equipment: Bar Feeder TSUGAMI

MAchine is in good working condition.

Inv. Num. : 8648 Type: BS12 (AE) - III Producer: TSUGAMI Generated: Parameters: Side length: 170 mm Max. turning diameter: 3-12 mm Maximum spindle speed: 12000 1/min Spindle bore: 7 mm Weight: 2200 kg Equipment: Bar Feeder TSUGAMI

pressure: 25 t no. of strokes: 1500 Hub/min sheet width: mm total power requirement: 20 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 25 t no. of strokes: 1500 Hub/min sheet width: mm total power requirement: 20 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Make IXION Type: BST16 Drilling capacity in steel (diameter) 3 - 16 mm Clamping height max. 1500 mm Weight 300 kg Max. clamping height: 1,500 mm Machine weight: 300 kg Drilling capacity: for ST 60: 3.5 mm - 16 mm Ø for GG-20: 3 mm - 16 mm Ø

output: 30 kW suction power: 4.200 l/min turning speeds: 5.092 U/min overpressure: 10 bar dimensions of machine L x W x H: 1,72 x 0,90 x 1,60 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This Eisele BSD304 is a powerful, electrically driven wastewater pump, designed for reliable use in industrial and construction applications., Thanks to its robust construction and high pumping capacity, this model is ideal for pumping contaminated water, sludge, and liquids containing solids., The pump is driven by a 400V electric motor and combines durability with energy efficiency., The cast iron housing and corrosion-resistant components ensure a long service life, even with continuous use in harsh conditions., , Key features:, , Voltage: 400V (three-phase), Pump type: Centrifugal, wastewater, Suction head: up to approximately 7 meters, Delivery head: up to approximately 20 meters, Pump body material: wear-resistant cast iron, , Suitable for: construction sites, sewage work, agriculture, and water management, , Easy to maintain and ready for immediate use, , The Eisele BSD304 is a re ...

The Eisele BSE740 is a self-priming, electric pump unit with a capacity of up to 130 m³ per hour, , designed for pumping dirty water, sludge, bentonite, and slurry. The pump has a motor power of 5.5 kW, , operates on a 3-phase 400V, 50Hz power supply and can operate under a maximum pressure of 20 meters water column (mwk).​, , Below are some important specifications and applications:, , Specifications of the Eisele BSE740, Type: Eisele BS740, Maximum pressure: 20 mwk, Flow rate: Up to 130 m³/h, Motor: 3x 400 V, 50 Hz, 5.5 kW, , Applications: sewage, sludge, bentonite, slurry, Use: suitable for dirty water pumps, industrial use, water management, and salvage projects., , Throughput capacity: 130 m3/h, Max dirt passage: 15 mm, Motor brand: Euromotori, Max. head: 20 MWK, Max dirt passage: 1500 rpm, Weight: 400 kg, , = More information =, , Year of manufacture: 1999, Empty weight: 450 kg ...

Sanding belt length 2200 mm, sanding belt width 400 mm, table length 1200 mm, usable height 120 mm, sanding width 390 mm, sanding belt speed approx. 21 m/sec, feed speeds 6 - 11 - 16 m/min, drive motor 7.5kW, feed motor 0.26 - 0.55 - 1kW, pneum. Belt oscillation and belt blow-out, incl. landing gear

The Eisele BSE740 EX Explosion-proof is a self-priming, electric pump unit with a capacity of up to 130 m³ per hour, , designed for pumping dirty water, sludge, bentonite, and slurry. The pump has a motor power of 5.5 kW, , operates on a 3-phase 400V, 50Hz power supply and can operate under a maximum pressure of 20 meters water column (mwk).​, , Below are some important specifications and applications:, , Specifications of the Eisele BSE740, Type: Eisele BS740, Maximum pressure: 20 mwk, Flow rate: Up to 130 m³/h, Motor: 3x 400 V, 50 Hz, 5.5 kW, , Applications: sewage, sludge, bentonite, slurry, Use: suitable for dirty water pumps, industrial use, water management, and salvage projects., , Throughput capacity: 130 m3/h, Max dirt passage: 15 mm, Motor brand: Euromotori, Max. head: 20 MWK, Max dirt passage: 1500 rpm, Weight: 400 kg, , = More information =, , Year of manufacture: 2016, E ...

The Eisele BSE740 is a self-priming, electric pump unit with a capacity of up to 130 m³ per hour, , designed for pumping dirty water, sludge, bentonite, and slurry. The pump has a motor power of 5.5 kW, , operates on a 3-phase 400V, 50Hz power supply and can operate under a maximum pressure of 20 meters water column (mwk).​, , Below are some important specifications and applications:, , Specifications of the Eisele BSE740, Type: Eisele BS740, Maximum pressure: 20 mwk, Flow rate: Up to 130 m³/h, Motor: 3x 400 V, 50 Hz, 5.5 kW, , Applications: sewage, sludge, bentonite, slurry, Use: suitable for dirty water pumps, industrial use, water management, and salvage projects., , Throughput capacity: 130 m3/h, Max dirt passage: 15 mm, Motor brand: Euromotori, Max. head: 20 MWK, Max dirt passage: 1500 rpm, Weight: 400 kg, , = More information =, , Year of manufacture: 1995, Empty weight: 450 kg ...

taper MK: 4 feeds:: ja weight of the machine ca.: 1,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1250x880x850 mm Weight: 180 kg Total power requirement: 1,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 210 mm band length: 400 mm capacity 90 degrees: square: 190 mm capacity 90 degrees: flat: 240 x 190 mm cutting speed: 16/32 m/min total power requirement: 1,1 kW weight of the machine ca.: 180 Kg dimensions: 1,2 x 0,8 x 80,8 m Hydraulic hacksaw with: - Coolant device - good condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1250x880x850 mm Weight: 180 kg Total power requirement: 1,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: BOGRAMA Model: BSM 750 / 220 / 15 Year of Manufacture : 2005 Type of Machine : Cut and Punch Machine Find more here - / Contact us at -

Base frame with adjustable base made of stainless steel Unwinding device for sleeve rollers with pull-off motor Sleeveformer and transport with servo motor and control Sleeve cutting device by means of rotating knives Sleeve lift device with sleeve holder Photocell control for product recognition Print Mark Recognition Complete Siemens control panel with control panel (touch panel) Pneumatic safety protection machine Sleeve Roll Monitoring Sleeve Roll End Monitoring Pneumatic connection 6 bar 1/2" E-connection 400 V, 50 Hz, 2 kW Maximum flow height for products 400mm Double sleeve roll unwinding with cutting and joining table Piece of sleeve storage (80 m) Product separation and product orientation Flail motor station for positioning the sleeve Needle system tor Sleeve Running sleeve holding station Platform with steps and railing for ergonomic operation of the sleeve ...

Key data: 75 mm, 2000 mm

+Demonstration machine+ Slight signs of wear (slight damage to the paintwork) Two-stage belt sander with contact wheel diameter 196 mm Surface grinding surface 75x530 mm. With automatic tension regulator for constant sanding belt tension. Two grinding speeds 14.5 m/s and 29 m/s Grinding head can be swivelled over 90° Shipping costs throughout Austria Immediately available / subject to prior sale.

with air blower / jogging device min. opening width: 620 mm max. opening width: 1.345 mm max. stacking weight: 1.000 kg with protective grid

Band saw Metabo BS260 Swift, year 2006, very good condition, 260 watts, 230 V, 1712 mm belt length, 40 kgPrices subject to change, errors, printing and typesetting errors excepted

Find more here - / Contact us at -

This 4-axis Fidia K 165 BSH was manufactured in 2002. It features a PCN775 control unit and a main spindle with a speed range up to 30,000 rpm. The machine dimensions are 3723 mm in length, 3750 mm in width, and 3370 mm in height, supporting a maximum table load of 2000 kg. If you are looking to get high quality milling capabilities consider the Fidia K 165 BSH machine we have for sale. Contact us for more information.

taper MK: 2 Dimensions (L/W/H): 800 x 400 x 1500 mm weight: 300 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This BRUDERER BSTA 25 was manufactured in 2007. A high-speed precision stamping press, it features a vertical main ram for precise stamping and a horizontal feed mechanism for workpiece positioning. Ideal for sheet metal forming, stamping, pressing, and metal shaping, it operates at high speeds with computerized control. Compact design ensures space-saving installation. Consider the opportunity to buy this BRUDERER BSTA 25 metal press. Contact us for more information.

Manufacturer: KAESER Model: BSD 72 SFC Year of Manufacture: 2012 Machine type: Screw Compressor Rated Power: 37.0 kW Motor Speed: 2960 1/min Max. Operating Pressure: 8.5 bar Ambient Temperature: 3 degrees C / 45 degrees C

feed pressure: 11 bar : 7,2 m³/min Number of working hours: 33.245 h total power requirement: 37 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Band saw Bäuerle Type BS 70 Passage height max. 490 mm Projection/cutting width 680 mm Motor power 3 kW With stop on saw table Saw blade guide 3-roller guide top and bottom Tilting table Rubber coating on the saw rollers Saw blade rollers diameter 700 mm Saw blade length 5000 mm Dimensions approx. 1300 mm x 800 mm Height 2400 mm Weight approx. 700 kg

Cutting range at 90° Round: 210 mm Square: 210 mm Flat: 240 x 190 mm Cutting range at 45° Round: 150 mm Square: 150 x 100 mm flat: 150 x 100 mm Saw blade dimensions: 400 x 30 x 1.5 mm 2 lifting speeds by pole switching. Motor: 16 & 32 m/min Drive motor: 380 V, 0.9 kW Weight: 170 kg Space requirement: 1190 x 480 x 1300 mm