brush used for sale

working width: 400 mm; maximum workpiece thickness: 300 mm; min. Workpiece length: 250 mm; aggregate: 2 Bürsteinheiten centrally adjustable and each with a single fine adjustment; 1. brush: methal brush, diameter 220mm; 2. brush: thynex brush granulation 80, diameter 220mm; height adjustment: handwheel; readout workpiece thickness: mechanical counter; feed speed: 4 - 12 m/min; motor power brushes: 2 x 3 kW; motor power feed: 0,37 kW; machine length: machine width: weight: In this machine, the brushes are pivotable diagonally to the feed direction, As a result, the edges are broken similar to oscillating brushes.

Type: Hedge and Grass Cutter New machine Auction-ID: A3-43510-35523

Permanent Magnet Brushless Servo Motor SIEMENS with ALPHA Spur GearServo Drive, Gear Motor, Servo GearType:1FT6105-8SF71-3EG1Series No. YF P921 8717 03 001Year of Manufacture: 2002Nominal Torque = MO: 54/65 NmNominal Current = Io: 36/45 ADreh Number = n. max.: 4500 rpmSpur Gear ALPHATyp: SP 210-MF2-20 -021-000Shaft Diameter 75 mmStump Shaft Length 105 mmCentering Diameter 180 mmCentering Diameter 35 mmBolt Circle Diameter 250 mm / 4 x 17 mm BoresHousing Dimension L/W/H 725 x 225 x

Single column hydraulic press, straightening press, punching bracket ECKOLDPressen frame with hydraulic cylinder, mobile press, punching unitType RSD 1500 - 125Masch. No. 317 / 690 Year of construction approx. 1986Compressive force 150 ton. Projection 125 mmSlide stroke 35 mmTable size 280 x 210 mmPlunger area 125 mmInstallation height (plunger to table) max. 265 mmTable height above floor 403 mmHydraulic operating pressure max. 500 bar- without hydraulic unit- Lifter surface with 4 threads M16 and 20 mm guide groove, one centering hole in the middle 15

Brushing machine Brand: Ecoline Type: Rustikmat 2-600 New machine - Upper feeding belt with grip, power 0,75 kW frequency controlled. - Controlled lift of feed belt via ball bearing guidances for precision and a long product life. - Manual height adjustment - Additional pneumatical and self-regulating pressure of brushes via lower pressure pistons to process as well slight convex / concave formed surfaces to get an even finish. - Additional verticale and independant adjustment of the bruhes up to 20 mm via regulator to have a similar wear and tear and to change the depth of the structuration (stronger / slighter). - Transmission of the motors via v-belt. That is the cause of the low weight, minimal maintenance work and in relation a high trasmission. Suctiong housing for each brush. - Additional rollers at infeed and outfeed for more supporting space. 2 Brushes More ...

Brushing machine brand: Ecoline Type: Rustikmat 2-1000 New machine 2 brushes More stability due to the lower brush position Length of the brushes 1000 mm; Diameter 270 mm. Power 4 kW per brush. Each brush can rotate in synchronism and counter-rotation. Working width: 1000 mm Working thickness: 120 mm. Workpiece dimensions: Min. length: 350mm Max. Width: 1000mm Max. Thickness: 120mm Electric adjustment of thickness, speed and feed with digital display. Spindle diameter 50 mm. Infinitely variable feed: 0 - 12 m/min. The speed of the brushes and the feed speed are controlled by frequency converters. The heavy machine bed allows deep structuring of the plates.

Brush grinding machine Brand: Ecoline Type: B Sand 5 New machine The B Sand 5 as a high-quality solution for your production. The individual equipment offers many possibilities. In addition to panels and profiled doors, sash surfaces can also be processed, for example. A perfect result for different types of materials and surfaces: - Solid wood, MDF, veneered parts... - impregnated, primed surfaces... Technical data: Workpiece dimensions: Min. length: 550 mm Min. thickness: 10mm Max. Width: 1550 mm Max. Thickness: 120 mm Power: 11 kW Air pressure: 6-8 bar Suction nozzle: 6 x Ø120mm unit - vertical swiveling brushes for grinding the edges. diameter 400mm per brush, 2 motors á 1,1 kW - Horizontal sanding lamellar roller diameter 420mm, length 1600mm, 3 kW motor - Cross brush for sanding the wood fibers diameter 40mm, 1,5 kW motor - 2 round b ...

Properties: Length 780 mm Total height 2400 mm Motor power 0.25 kW Depth 780 mm Volume 931 L Steel as a material Description: Front flange - DN 50 reduction Flange rear - reduction DN 50 bottom: Disc valve DN 100 Motor: 0.25 KW

Vertreiberbürste als Zubehör auf Anfrage lieferbar. - Producer Leif & Lorenz - Type B2 - 1300 - Working width ~ 1200 mm - Year of construction 2004 / 2005 - Working height ~ 800 mm - Number of curtain heads 1 Stk. - Curtain head, straight in line - Operating side, right - Length infeed conveyor 1400 mm - Length outfeed conveyor 1400 mm - Length over all 3000 mm - Feed speed infinitely adjustable 54 - 150 m/min - Lacquer pump infinitely variable - Height adjustment manuell - Colour 7035 - Voltage / HZ : 50 V, 400 Hz - Total connection power ca. 3 kW - Location, on stock D-32825 Blomberg - Voltage fluctuation max. +/- 5%

in line washing & brushing machine, Station 1: Brushing station, equipped with 2 brush rollers, Station 2: Squeezing station, equipped with 2 squeezing rollers and an air dryer with a new air knife, all rollers are sprayed with osmosis water for cleaning, maximum material width: is 80 cm. - Please note this lot is also listed as part of lot 1 and is subject to seller conformation by Panasonic, total price for lots 25 to 41 must be greater that the price for lot 1. Auction-ID: A1-45187-27

Suitable for thin materials, wood and painted surfaces. Working width: 1650mm, feed rate: 5-25m/min, sanding belt dimensions: 1650mm/2620mm, connected load: 33kW, length: 1800mm, width: 2200mm, height: 2500mm, weight: 4.5t, operating hours: approx. 200h. The machine is technically fully functional. On-site inspection is possible.

- Producer Venjakob - Working width 1300 mm - Max. part height ~ 30 - 150 mm - With ionisation half-coil on top - Zur Montage auf einen Transport oder Schleifmaschine - ohne Schaltschrank - Connecting piece 2 x 180 mm - Total connection power Höhenverstellung 0,09KW, Bürstenantrieb 0,75 kW - Voltage / HZ 400 / 50 - Location - Spannungsschwankungen max. +/- 5 %

- Producer Venjakob - Working width 1300 mm - Max. part height ~ 30 - 150 mm - Heightadjustment, manually - Zur Montage auf einen Transport oder Schleifmaschine - ohne Schaltschrank - Connecting piece 2 x 120 mm - Total connection power Bürstenantrieb 1,5 kW - Voltage / HZ 400 / 50 - Location - Spannungsschwankungen max. +/- 5 %

- Producer Leif & Lorenz - Type B6 - Working width 1100 mm - Year of construction 2017 - 1. Unit - Stain brush System FlexTrim - Motor power 1,1 kW - Brush head speed adjustable by converter - Vacuum transport belt - Feed speed infinitely adjustable - Length 1.000 mm - Location - Colour 7035 - Voltage / HZ 400/50

wird mit neuem VakuumTransportband ausgeliefert. - Producer Fladder - Type Gyro 300 VAC - Working width 1300 mm - Year of construction 1994 - Number of brush heads 6 Stk. - Rotating and oscillating sanding head - Motor power 5 kW - Vacuum transport belt - Feed speed infinitely adjustable 2 - 8 m/min - Length 2070 mm - Width 2370 mm - Height 2240 mm - Weight 2300 kg - Location - Voltage / HZ 400 / 50

with two vacuum fans - Producer Fladder - Type Gyro 300 VAC-2 - Working width 1300 mm - Year of construction 1997 - Number of brush heads 6 Stk. - Rotating and oscillating sanding head - With sound insulating cabinet - Motor power 5 kW - Vacuum transport belt - Feed speed infinitely adjustable 2 - 8 m/min - Length 2070 mm - Width 2370 mm - Height 2240 mm - Weight 2300 kg - Location - Voltage / HZ 400 / 50

Grinding width 1350 mm CE version V400/50 50 Hz Viewing window for visual access to the units LED lighting for indoor lighting Vacuum table with 3 kW electric fan Tynex Texturing Brush with Tynex Brush K46 Y-type - Pneumatic on/off for the roller of the first unit ? R? - Pneumatic on/off for the roller 2nd abrasive belt roller combination unit TC - Elastic electronic sanding shoe (56 graduation) - Electronic thickness adjuster FOX 1000S electronic control 10.4 inch touch screen 15 kW motor power 1-motor version

Type DTL-20A modified Brush roll height 200 mm Pneumatic Grinding Head Height 200 mm Brush roll diameter 300 mm Pneumatic Grinding Head Diameter 100mm Diameter of spindle 25/30 mm Roller speed: frequency control Electric up and down Power 0.75 kW Transport dimensions 860x750x1100 mm Weight 140 kg Price 2050 Eur (EXW Jonava, Lithuania)

Brush sander WOODLAND MACHINERY with metal brush (new) Type 1000-2S metal Working width 1000 mm Min.working length 400 mm Working thickness 2-80mm Grinding roller speed - Frequency control Feeding speed 5-20 m/min Metal shaft 7.5KW Grinding motor 2.2KW Feed motor 1.5 kW Lifting motor 0.37KW Total motor power 11.57 kW Transport dimensions 1600x1650x1450mm Weight 750 kg Price 6700 Eur (EXW Jonava, Lithuania)

working width: 800 mm; working height: 300 mm; min. Workpiece length: 250 mm; aggregate: 2 Units seperatly adjustable; 1. brush: Metalbrush diameter 220mm; 2. brush: Tynexbrush, grit 80, diameter 220mm; height adjustment: manual; read out workpiece thickness: mechanical counter; feed speed: 4 - 12 m/min; motor power brushes: 2 x 5,5 kW; motor power feed: 0,37 kW; machine length: 1400mm; machine width: 1500mm; waight: 950kg;

working width: 300 mm; maximum workpiece thickness: 210 mm; min. Workpiece length: 300 mm; aggregate: 2 Bürsteinheiten central adjustable; 1. brush: tynexbrush granulation 60, diameter 180mm; 2. brush: tynexbrush granulation 80, diameter 180mm; height adjustment: handwheel; read out workpiece thickness: mechanical counter; feed speed: 4 - 12 m/min; motor power brushes: 2 x 3 kW; motor power feed: 0,37 kW; machine length: 1150mm; machine width: 800mm; weight: 390;

working width: 400 mm; maximum workpiece thickness: 300 mm; min. Workpiece length: 250 mm; aggregate: 2 brushing units separately adjustable; 1. brush: metal brush 220mm; 2. brush: tynex brush, granulation 80, diameter 220mm; height adjustment: handwheel; height adjustment: mechanical counter; feed speed: 4 - 12 m/min; motor power brush: 2 x 3 kW; motor power feed: 0,37 kW; machine length: 1400mm; machine width: 900mm; weight: 500kg;

working width: 600 mm; maximum workpiece thickness: 300 mm; min. Workpiece length: 250 mm; aggregate: 2 brushing units seperatly adjustable; 1. brush: methal brush, diameter 220mm; 2. brush: tynex brush granulation 80, diameter 220mm; height adjustment: handwheel; read out workpiece thickness: mechankal counter; feed speed: 4 - 12 m/min; motor power brushes: 2 x 4 kW; motor power feed: 0,37 kW; machine length: 1400mm; machine width: 1200mm; weight: 650kg;