brush used for sale

5031 KVA Brush BJ45M.89/4 Generator 11,000 V / 2641 A 1500 r/min from 1994 for sale. The air-cooled alternator is in working order. Further information on request.

Brush segment Quick Snap, brush, plastic brush, nylon brush, weed brush, conical brush -Brush: steel / plastic bristles -Wooden ring: Ø 490/328 mm -Quantity: 1x brushes available -Price per piece -Dimension: Ø 760 x 260 mm -Weight: 9.2 kg / piece

Brush segment Quick Snap, brush, plastic brush, nylon brush -Manufacturer: Tennant, brush, 20 nylon with plate unused Ovp -Type: 14967 Disco 20 D = 500 -Quantity: 2x brushes available -Price per piece -Dimension: Ø 500 x 110 mm -Weight: 6 kg / piece

Brush segment Quick Snap, brush, plastic brush -Outer: Ø 105 mm -Segment outside: Ø 86 mm -Recording: 60 mm -Toothing: 20 teeth -Width: approx. 105 mm -Price: per piece -Number: 44x available -Weight: 0.35 kg/piece

1 Qty.1 Second-hand brush grinding machine Mfc.: Gurutzpe Type: Brushes cutting machine Built: 1975 Model: Max. Q800x2500 2 Qty. 1 Second-hand Rubber Grinding Machine Mfc.: Churchill Type: PCH 24" X 96" Built: 1957 Model: Max. Q600x2400

Cleaning brush Brand: TecnoWood Type: SPD The cleaning brush unit SPD has been studied to clean the surface of the boards. The filaments of the brush remove the dust to assure a deep cleaning. The big flexibility is assured by the modularity of the solution, which is the greatest strength of all solutions of TecnoWood. Technical Data Standard equipment - Unit with a double brush - Electric lifting of the top brush with digital readout of the working position - Manual lifting of the bottom brush with digital readout of the working position - Customised length of the brush - Customised fixing brackets - Width of the brush 50 mm. - Automatic system to detect the thickness, for brushes units integrated into a line with PLC - Brushes speed rotation max. 90 mt/1? Optional equipment - Optional equipment - Blowers? unit to be applied at the exit side of a ...

Brush machine Hymmen With 3 brushes Brush 1 500 lobe brush for smoothing the surface Brush 2 sisal brush for glossy surfaces Brush 3 soft cleaning brush Working width 1300 mm Feed speed 3 - 20 m/min. With replacement brushes Total dimensions L 2000 mm x W 3000 mm x H 1500 mm

- Producer Costa - Type BF 25-1350 - Working width 1350 mm - Year of construction 2002 - Number of brush heads 2 Stk. - 1. Unit - Spindle with brush head, D 350 mm - Producer brush head Flex Trim - grain size 220 - Bürstenkopf tiltable 0 - 30 Grad - 2. Unit - Spindle with brush head, D 350 mm - Producer brush head Flex Trim - grain size 220 - Brush heades tiltable 0 - 30 Grad - Unit height adjustable - Vacuum transport belt - Operating side, left - Location - Druckluftbedarf, Enstaubung 4 bar bei 340 L/min - Diameter Connecting piece 4 x160mm mm - Absaugleistung 3.600+2.500, Gesamt: 6.100 m³/h - Airspeed, exhaust system 24 m/s - Switch cabinet built into the machine - Total connection 35 A / 15 kW - Voltage / HZ 400 / 50 - Spannungsschwankungen max. +/- 5 %

Working width: 400 mm; Working height: 300 mm; minimum workpiece length: 250 mm; Aggregates: 2 brush units separately adjustable ; Brush evasion height: 25 mm with pneumatic damping; 1. Brush: Metal brush diameter 220mm; 2. Brush : Tynex brush, grit 80, diameter 220mm; Clockwise - counterclockwise: for both brushes; Height adjustment: handwheel; Height indicator: mechanical counter; Feed speed: 4 - 12 m/min; Motor power brushes: 2 x 3 kW; Engine power feed: 0.37 kW; Machine length: 1400mm; Machine width: 900mm; Weight: 500kg;

Configuration: EBM 450 DB + 5B DB = transverse band 5B=5 x brush aggregate DB: 4 KW B: 5 KW TECHNICAL DATA Brushes - modular system - easy adjustment and change of brush - shaft brushing machine ? 40 ? n = 1000 rpm - sense of rotation: running/counter-running - brush diameter min/max: 200 /300 mm transverse band - bandwidth: 150 mm - sanding belt speed: adjustable with variator - pneumatic sanding shoe - engine: 4 kW General - working height: 850 mm (fixed table) - before and after the brush unit is a rubberized pressure roller that ensures problem-free throughput guarantees - speed anti-slip conveyor belt of exceptional quality with variator 4 to 12 m/min. - min. piece length for brush ? 200: 275 mm - workpiece height/brush ? 300: 300 mm - transit motor 2.2 kW - digital reading 1/10 mm

Brush deburring machine RSA type RASA Mono Masch. No. R.III-09/2669 Year of construction 2008 Brush diameter max. 250 mm Brush width 60 mm Brush holder 53 mm Brush speed 1500 / 3000 rpm. Motor power 2.6 / 3.1 kW Mains connection 400 volts, 50 Hz - Base with 4 oscillating elements Space requirement L x W x H 720 x 480 x 1180 mm Weight 172 kg very good condition; used

working width: 400 mm; maximum workpiece thickness: 300 mm; min. Workpiece length: 250 mm; aggregate: 2 brushing units separately adjustable; 1. brush: metal brush 220mm; 2. brush: tynex brush, granulation 80, diameter 220mm; height adjustment: handwheel; height adjustment: mechanical counter; feed speed: 4 - 12 m/min; motor power brush: 2 x 3 kW; motor power feed: 0,37 kW; machine length: 1400mm; machine width: 900mm; weight: 500kg;

Brush deburring machine, pipe deburring machine BAUER Type BE 1 Masch. No. 05-72025 Year of construction 2005 Brush diameter 250 mm Brush width 25 - 60 mm Speed 1500 / 3000 rpm. Power 2,2 / 3 kW Mains connection 380 Volt, 50 Hz - Material support - new deburring brush Space requirement L x W x H 550 x 450 x 440 mm Weight 65 kg good condition; used

SPECIFICATIONS: Workspace: Maximum width: 1600 mm Minimum length: 550 mm Working height: min. 10 mm - may. 120 mm PLC control COMPOSITION: I. Group: 02 Side brushes with automatic adjustment II. Group: 01 Transverse rotation brush (immersion brush) III. Group: 03 Interchangeable heads with disc brushes or brushes IV. Group: 02 edge strip heads V. Group: 03 Interchangeable heads with disc brushes or brushes VI. Group: 01 Transverse rotation brush (immersion brush) EQUIPMENT: 01 Motorized transport carpet: 2200 x 1600 mm 01 Self-cleaning motorized unloading belt (conveyor belt) 2500 x 1600 mm

Working width: 600 mm; Working height: 280 mm; minimum workpiece length: 250 mm; Aggregates: 2 brushing units centrally adjustable and each with individual fine adjustment; 1. Brush: Metal brush diameter 220mm; 2. Brush : Tynex brush, grit 80, diameter 220mm; Height adjustment: electric; Height indicator: mechanical counter; Feed speed: 4 - 12 m/min; Motor power brushes: 2 x 4 kW; Engine power feed: 0.37 kW; Machine length: 1.5m; Machine width: 1.5m; Weight: 700kg; On this machine, the brushes can be swivelled diagonally to the feed direction, this breaks the edges, similar to oscillating brushes.

Brush deburring machine, tube deburring machine ERINI type 250 Year of manufacture approx. 1995 Brush diameter 250 mm Brush width 25 - 60 mm Speed 1500 / 3000 rpm. Power 2.2 / 2.8 kW Mains connection 380 volts, 50 Hz - Material support - new deburring brush - Extraction connection 100 mm Space requirement L x W x H 620 x 500 x 1150 mm Weight 100 kg good condition; used

working width: 600 mm; maximum workpiece thickness: 300 mm; min. Workpiece length: 250 mm; aggregate: 2 brushing units seperatly adjustable; 1. brush: methal brush, diameter 220mm; 2. brush: tynex brush granulation 80, diameter 220mm; height adjustment: handwheel; read out workpiece thickness: mechankal counter; feed speed: 4 - 12 m/min; motor power brushes: 2 x 4 kW; motor power feed: 0,37 kW; machine length: 1400mm; machine width: 1200mm; weight: 650kg;

working width: 400 mm; maximum workpiece thickness: 300 mm; min. Workpiece length: 250 mm; aggregate: 2 Bürsteinheiten centrally adjustable and each with a single fine adjustment; 1. brush: methal brush, diameter 220mm; 2. brush: thynex brush granulation 80, diameter 220mm; height adjustment: handwheel; readout workpiece thickness: mechanical counter; feed speed: 4 - 12 m/min; motor power brushes: 2 x 3 kW; motor power feed: 0,37 kW; machine length: machine width: weight: In this machine, the brushes are pivotable diagonally to the feed direction, As a result, the edges are broken similar to oscillating brushes.

Working width: 600 mm; Working height: 300 mm; minimum workpiece length: 250 mm; Aggregates: 2 brushing units separately adjustable; 1. Brush: Metal brush diameter 220mm; 2. Brush : Tynex brush, grit 80, diameter 220mm; Clockwise - counterclockwise: both brushes can be adjusted separately; Height adjustment: electric; Height indicator: mechanical counter; Feed speed: 4 - 12 m/min; Motor power brushes: 2 x 4 kW ; Engine power feed: 0.37 kW; Machine length: 1400mm; Machine width: 1200mm; Weight: 650kg;

Description: sanding machine with brushes Technical specifications: the machine was used for structuring veneered panels. sanding width approx. 1100 mm workpiece thickness from 3 mm up to 160 mm belt conveyor with variable feed speed aggregate 1: steel brush diameter 310mm, motor power 5,5 KW. rotation speed fixed. aggregate 2: tynex brush diameter 310mm, motor power 5,5 KW. rotation speed variable by inverter. aggregate 3: steel brush diameter 310mm, motor power 5,5 KW. rotation speed fixed. aggregate 4: tynex brush diameter 310mm, motor power 5,5 KW. rotation speed variable by inverter. CE norms serial number: 30, Approx. Onsite Dimension. (l x w x h): 2,500 x 1,500 x 2,100 mm, weight approx.: 2,000 kg

Weed brush Nimos ECO-60 HM, three-point front attachment with PTO pump for brush-drive. Right-turning PTO drive in working direction! Also suitable for direct hydraulic drive. Hydraulic motor with flat-sealing hydraulic connections. For swivel functions 3 x dw required. Brush-circle D = approx. 700 mm, Swivel range from left to right approx. 250 cm. Other weed brushes stock, also hand-held and self-propelled work machine. ------ Jodau Municipal, Environmental & Green Care Technology ------- Used machines for plant & sports field maintenance, gardening & landscaping, cemetery technology & winter service, sweeping & disposal, environmental care, motors and more...

Belt conveyor "Italmeccanica" mm: 1000 Working width mm: 1600 2 brushes for lateral processing in the entrance area Longitudinal machining brushes Horizontal brush unit Horizontal brush unit Brush roller (transversal) Weight Kg: 2000 Total connection KW: 15.5

TECHNICAL DATA: Working width mm: 1600 No 2 side brushes Lengthwise brushing unit Horizontal brush Horizontal brush Brush roller (transversal) Weight Kg: 2500 Total power installed kW: 11

TECHNICAL DATA: Working width mm: 1600 No 2 side brushes Lengthwise brushing unit Horizontal brush Horizontal brush Brush roller (transversal) Weight Kg: 2500 Total power installed kW: 11

Deburring machine make RSA type Turnamat 2Machine -No: 48-1047 / 96 built in 1996Technical specifications:Workpiece cross-sections: 10 x 10 to 150 x 150 mm2 brush speeds: 1500/3000 rpm.Deburring time: 1 - 5 sec.Drive power: 3.5 / 4.6 kWsuitable for- Steel, VA, aluminum, copper and brass- Deburring by rotating the brush at high speed- Service rotation = circling the brush around the axis of rotation, i.e. continuous change of working direction at low speedused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Deburring machine make RSA type Turnamat 2Machine -No: 048-028908 built in 2008Technical specifications:Workpiece cross-sections: 10 x 10 to 150 x 150 mm2 brush speeds: 1500/3000 rpm.Deburring time: 1 - 5 sec.Drive power: 3.5 / 4.6 kWDimensions approx .: 1200 x 1200 x 1800 mmWeight about: 550 kgsuitable for- Steel, VA, aluminum, copper and brass- Deburring by rotating the brush at high speed- Service rotation = circling the brush around the axis of rotation,i.e. continuous change of working direction at low speedused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Wire brush round, round grinding brush, braid round brush, grinding wheel, cup wheel -Inside: Ø 25 mm -Outer: Ø 300 mm -Width: 25 mm -Number: 5x discs available -Price: per piece -Weight: 2.5 kg

Wire brush round, round grinding brush, braid round brush, grinding wheel, cup wheel -Inside: Ø 32 mm -Outer: Ø 200 mm -Width: 25 mm -Number: 3x discs available -Price: per piece -Weight: 1 kg

Brush deburring machine, tube deburring machine BAUER Type BE 1 Masch. No. 29-0520 Year of construction 1992 Brush diameter 250 mm Brush width 25 - 55 mm Speed 1500 / 3000 rpm. Power 2,2 / 3 kW Mains connection 380 Volt, 50 Hz - Material support Space requirement L x W x H 500 x 450 x 440 mm Weight 45 kg good condition; used

Brush sanding machin with 3 working units. Machine has only a few operating hours. 1st working unit: - 5 rotating heads with 3 discs each - disc diameter 125 mm - quick change of the discs - motorized height adjustment 2. Station: - brush with diameter 300 mm - motorized height adjustment - Electronic inverter 4 kW 3. Station: - brush, diameter Durchmesser 300 mm - motorized height adjustment - Electronic inverter 4 kW - Rotative blower cleaning panel - Touch Screen IPC COMPACT 8,5 - conveyer with vacuum table - vacuum fan 7,5 kW - Vorschubgeschwindigkeit wird über einen FU geregelt - conveyer electronic inverter 2,2 kW - Producer Viet - Type Opera 5-3.3 XLL - Working width 1.350 mm - Year of construction 2018 - Working height 900 mm - Max. part height 200 mm - Vacuum transport belt - Operating side, left - Standort, nicht am Lager in Litauen - Voltage / HZ 400/50 - Spannungssch ...

Working width: 600 mm; Working height: 220 mm; minimum workpiece length: 250 mm; Aggregates: 4 ; 1. Saw Cutting Unit Random System: Saw Cut Optics; 2. Brush : metal, diameter 220mm; 3. Brush: Tynex grit 60, diameter 220mm; 4. Brush: Tynex grit 120, diameter 220mm; Height adjustment: handwheel; Height indicator: mechanical counter; Feed speed: 4 - 12 m/min; Engine power sawn rough: 1.1 kW; Motor power brushes: 4 kW; Engine power feed: 0.37 kW; Machine length: 2800mm; Machine width: 1500mm; Machine height: 1600mm; Weight: 1500kg;

Working width: 300 mm; Height:-; Minimum workpiece length: Aggregates: 2 brushing units top/bottom; 1. Brush: Steel; 2. Brush : Steel; Height adjustment: electric; Height indicator: -; Brush speed: both infinitely variable; Feed rate: -; Motor power brushes: 2 x 3 kW; Engine power feed: -; Machine length: 1150mm; Machine width: 800mm; Weight: 390;

Manufacturer: Heesemann Struckturbürstenmaschine, Type: BM 8, Year: 2005, Monting of the machine: Brush/Brush/Brush, Number of units: 3, Working widht mm: 1300, Diameter of brushes: 400+400+150 mm, kW output motor: 7,5+7,5+1,5, Feeding speed continous adjustable: 13-65 m/min, Weight approx. kg: 6.000, Work piece width min-max mm: 1300, Year :2005

Triple brush CIMEX, TRUVOX INTERNATIONAL LTD R48HD Number of brushes: 3 brush diameter: Ø 200 mm outer diameter brush housing: Ø 510 mm motor: 1,5 kW 230 V 1AC 50 Hz IP X0 approx. 10 m connection cable used, tested ! Dimensions: 750 x 510 x 1140 mm

Brushing machine Brand: Ecoline Type: Rustikmat 2-600 New machine - Upper feeding belt with grip, power 0,75 kW frequency controlled. - Controlled lift of feed belt via ball bearing guidances for precision and a long product life. - Manual height adjustment - Additional pneumatical and self-regulating pressure of brushes via lower pressure pistons to process as well slight convex / concave formed surfaces to get an even finish. - Additional verticale and independant adjustment of the bruhes up to 20 mm via regulator to have a similar wear and tear and to change the depth of the structuration (stronger / slighter). - Transmission of the motors via v-belt. That is the cause of the low weight, minimal maintenance work and in relation a high trasmission. Suctiong housing for each brush. - Additional rollers at infeed and outfeed for more supporting space. 2 Brushes More ...

Brushing machine brand: Ecoline Type: Rustikmat 2-1000 New machine 2 brushes More stability due to the lower brush position Length of the brushes 1000 mm; Diameter 270 mm. Power 4 kW per brush. Each brush can rotate in synchronism and counter-rotation. Working width: 1000 mm Working thickness: 120 mm. Workpiece dimensions: Min. length: 350mm Max. Width: 1000mm Max. Thickness: 120mm Electric adjustment of thickness, speed and feed with digital display. Spindle diameter 50 mm. Infinitely variable feed: 0 - 12 m/min. The speed of the brushes and the feed speed are controlled by frequency converters. The heavy machine bed allows deep structuring of the plates.

Brush grinding machine Brand: Ecoline Type: B Sand 5 New machine The B Sand 5 as a high-quality solution for your production. The individual equipment offers many possibilities. In addition to panels and profiled doors, sash surfaces can also be processed, for example. A perfect result for different types of materials and surfaces: - Solid wood, MDF, veneered parts... - impregnated, primed surfaces... Technical data: Workpiece dimensions: Min. length: 550 mm Min. thickness: 10mm Max. Width: 1550 mm Max. Thickness: 120 mm Power: 11 kW Air pressure: 6-8 bar Suction nozzle: 6 x Ø120mm unit - vertical swiveling brushes for grinding the edges. diameter 400mm per brush, 2 motors á 1,1 kW - Horizontal sanding lamellar roller diameter 420mm, length 1600mm, 3 kW motor - Cross brush for sanding the wood fibers diameter 40mm, 1,5 kW motor - 2 round b ...

Brushing machine for structuring of wood surfaces Brand: Ecoline Type: Rustikmat 2-600 Immediately available showroom machine - Upper feeding belt with grip, power 0,75 kW frequency controlled.  - Controlled lift of feed belt via ball bearing guidances for precision and a long product life.  - With electronic adjusments and frequency controlled brushes  - Transmission of the motors via v-belt. That is the cause of the low weight, minimal maintenance work and in relation a high trasmission.  - Additional rollers at infeed and outfeed for more supporting space.  - Additional pneumatical and self-regulating pressure of brushes via lower pressure pistons to process as well slight convex / concave formed surfaces to get an even finish.  - Additional verticale and independant adjustment of the bruhes up to 20 mm via regulator to have a similar wear a ...

Type DTW-120A Horizontal three axis Brush roll height 300/600/300 mm Brush roll diameter 300 mm Roller speed: frequency control Power 1.5 kW Transport dimensions 1780x760x880 mm Weight 165 kg

Type DTW-60A Horizontal three axis Brush roll height 300/300 mm Brush roll diameter 300 mm Roller speed: frequency control Power 1.5 kW Transport dimensions 1220x720x900 mm Weight 150 kg

Type DTL-20A Brush roll height 200 mm Brush roll diameter 300 mm Roller speed: frequency control Electric up and down Power 0.75 kW Transport dimensions 860x750x1100 mm Weight 140 kg

Brush deburring machine, make RSA, type Rasamax MonoMasch. -No: R-M-38/3305 built in 2000Technical specifications:Material thickness from: 1 - 6 mmSheet thickness: up to 6 mmSheet width: 100 to 1,000 mmSheet length: 100 to 1,000 mmSheet shape: sheets with notches, straight cut sheetsMaterials: steel, stainless steel, NEMax. Brush diameter: 250 mmBrush speed: 1500/3000 rpm.Drive power: 1.0 / 1.4 kWPower connection: 380 V, 50 HzDimensions with base: 400 x 500 x 1300 mmWeight approx: 50 kgWith- Base cabinetused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Small compact brush machine for companies that are just starting out with brushing. Specifications: Working width 400mm Working height n.a. (or limited by the height of the feeder) 1 working head 3 kW (4kw optional). Suitable for brushes dia.250mm, L 400mm, d40mm. Brush from below, without feed is possible to work manually. Made in Slovakia, EU. Parameters adjustable on request. The price is without feeder and without tools

Brush deburring machine make RAIMANN type USM 58Machine -No: 219361 Ser. -No: 1068 built in 1989Technical specifications:Brush diameter: 300mmBrush Width: 110mmDrive power: 2.2 kWPower connection: 380V, 50HzDimensions L x W x H: 750 x 600 x 1100 mmApprox. weight: 80 kgwith- Table axially adjustable in height and angleused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

- Producer Leif & Lorenz - Type B6 - Working width 1100 mm - Year of construction 2017 - 1. Unit - Stain brush System FlexTrim - Motor power 1,1 kW - Brush head speed adjustable by converter - Vacuum transport belt - Feed speed infinitely adjustable - Length 1.000 mm - Location - Colour 7035 - Voltage / HZ 400/50

Working width: 400 mm; Working height: 300 mm; minimum workpiece length: 250 mm; Aggregates: 2 brushing units separately adjustable; 1. Brush: Scotch Brite Medium/Diameter 220mm, Vario Drive; 2. Brush : Scotch Brite Hard / diameter 220mm, vario drive; Height adjustment: handwheel; Height indicator: mechanical counter; Feed speed: 4 - 12 m/min; Motor power brushes: 2 x 3 kW / both with vario drive (infinitely adjustable); Engine power feed: 0.37 kW; Machine length: 1400mm; Machine width: 900mm; Weight: 500kg;

Working width: 400 mm; Working height: 220 mm; minimum workpiece length: 250 mm; Aggregates: 2 with fine adjustment; 1. Saw Cutting Unit Random System: Saw Cut Optics; 2. Brush : Tynex brush, grit 80, diameter 220mm; Height adjustment: handwheel; Height indicator: mechanical counter; Feed speed: 4 - 12 m/min; Engine power sawn rough: 1.1 kW; Motor power brushes: 3 kW; Engine power feed: 0.37 kW; Machine length: 1400mm; Machine width: 1400mm; Weight: 550kg;

working width: 300 mm; maximum workpiece thickness: 210 mm; min. Workpiece length: 300 mm; aggregate: 2 Bürsteinheiten central adjustable; 1. brush: tynexbrush granulation 60, diameter 180mm; 2. brush: tynexbrush granulation 80, diameter 180mm; height adjustment: handwheel; read out workpiece thickness: mechanical counter; feed speed: 4 - 12 m/min; motor power brushes: 2 x 3 kW; motor power feed: 0,37 kW; machine length: 1150mm; machine width: 800mm; weight: 390;

Brush machine Wandres type Ingromat Cleaner CF04/400 Specifications: • Working width (mm): 400 • Brush: top and bottom • Spraying device

Strip Brush MINK BRUSH Flex System FBL1330-K16 Fiber Height: 10mm Fiber Material: Horsehair Fiber Color: Black Body Measurements: Width: 10mm, Height: 23mm Sheet Thickness: 2 - 3mm Body Material: Thermoplastic rubber (TPE/TPV) body color: black length: approx. 20 m New ! Dimensions ( packaging ): 650 x 650 x 40 mm