brush used for sale

Structuring Machine, Brush Grinding Machine Make: Löwer Model: SMN 650 BB Year of construction: 2017 2 grinding shafts

material thickness: - mm material width: 730 mm table-size: 2800 x 730 mm turning speeds: max 12000 U/min speeds: 1000 - 13500 U/min range L-W-H: 3 x 0,85 x 0,57 m weight of the machine ca.: 140 kg Electric 380 Volt: Machinefeets: höhenverstellbar In-house construction of a universal grinding station consisting of a flexible shaft from Suhner with various attachments, a separate belt sanding unit for sanding edges with the same sanding direction (lying and standing - see photos 4+5) and the large sanding table made of aluminum profiles. This table is equipped with a manually movable and height-adjustable side stand that runs in a guide over the entire length. There is a horizontal support bar attached to it, to which the sanding brush is attached and which can be moved manually from front to back. The recording bar can also be tilted if necessary. With this system, larger areas with th ...

Brush machine, manufacturer: WANDRESS, year of manufacture: 1999, serial no.: 991216, Inkromatcleaner, type CH 29/950/1500, cleaning unit, type BI 99 SX3/1500, hot-speed chanel, type HSC 50/2/1500, (hammer bid is subject to reservation, sum of bids 334-350 or collective bid of item 333 will be compared after the auction closes)

Description: serial number:  ,6297 dimensions of workpiece: height max. 100 mm width max. 300 mm length min. 380 mm length max. Infinity through feed speed 5-25 m/min spindle speed 200-1100 rpm spindle length horizontal 300 mm number of spindles (number of brush): 4 (8) standard IP54 power supply 380 V, 3PH/ 50Hz serial number: 6,297, Approx. Onsite Dimension. (l x w x h): 2,390 x 1,300 x 1,800 mm, weight approx.: 1,000 kg

doubel side brushing unit Brand: OMMA Type:SPX_1400 New machine with transversal cleaning system Technical data: Useful working width about mm 1.350 Maximum working thickness mm 150 Adjustable speed mt/min 5~25 Working level (adj. +/- 20mm) mm 905 Brush rotation speed about mt/min 92 Suction connections Ø mm 120 Installed power about kW 1,2 Color Ral 7035 Command side (in front machine, looking at the entrance) Right Standard voltage v 400/50/3 Technical equipment: - Top & bottom transversal cleaning system by means of motorized belts with special nylon brushes. - Adjustable system to compensate the natural lengthening of the brushes, increasing the lifetime. - Mechanical devices through the brushes to remove dust allowing the best elimination/aspiration. - Special cleaning system for the finest particles, with adjustable atomizers and separate tank for specif ...

- double sided brishing / deburring machine Metabo 7445 / Metabo 72730 - 4 kW - shaft diam. 35 mm - 1500 rpm; ready for operation

Motor rating 0,5 (0,7) kW (PS) Connected load 400V 50Hz (3-phase) Electrical protection 16 A Nominal rating max. 400 bottles/h Length 780 mm Width 550 mm Height 1210 mm Weight 80 kg Material 1.4301 / AISI 304 brushes from polyamide Pressure max. 3,5 bar Connection for cleaning AG-1/2\" (Gardena) water temperature max. 30° C Connection for waste water PVC-Schlauch inside Fi45mm, outside Fi50mm ; new machine - top condition

Type SK-1000-P4 Working width 1000 mm Min.working length 400 mm Working thickness 2-80mm Polishing roller speed - Frequency control Feeding speed 5-20m/min Total motor power 8.14kW Disc motor 1.5kW1 Disc swing motor 0.37kW 1 Screw roller motor 2.2kW 2 Feeding power 1.5kW Working table up and down 0.37kW Transport dimensions 2700x1700x1600mm Weight 2300kg

Type SK-1000-P6 Working width 1000 mm Min.working length 500 mm Working thickness 2-150mm Polishing roller speed - Frequency control Feeding speed 3-12,5 m/min Total motor power 13.87 kW Disc motor 1.5 kW1 Cross motor 1.5 kW 1 Screw roller motor 2.2 kW 2 Feeding power 2.2 kW Up and down motor 0.37kW4 Swing motor 0.37kW 2 Working table up and down 0.55 kW Transport dimensions 3650x1850x2100mm Weight 4200 kg

Type SK1300-P6 Working width 1300 mm Min.working length 370 mm Working thickness 5-140mm Polishing roller speed - Frequency control Feeding speed 2.5-12,5 m/min Total motor power 16.87 kW

Length 300/600 mm Width 72 mm Roughness P240/P320 Holder 4,5 mm Price 0,87 Eur/1 pcs. (300) (EXW Jonava, Lithuania) Price 1,74 Eur/1 pcs. (600) (EXW Jonava, Lithuania)

Length 300 mm Width 40/60 mm Roughness P80/P120/P150/P240/P320 Holder 4,5 mm Length 300 mm Width 40/60 mm Roughness P80/P120/P150/P240/P320 Holder 4,5 mm 40 mm: Price 60 Eur (EXW Jonava, Lithuania) 60 mm: Price 68 Eur (EXW Jonava, Lithuania)

4 Belt grinding unit 2 grinding brushes Carpet length mm: 5500 Carpet width mm: 400 (extendable) Weight Kg: 800

TECHNICAL DATA: Working width mm: 400 Workpiece length min mm: 350 Thickness mm: 150 No 2 brushing units (Turnable) Total connection kW: 1,83 Weight Kg: 1200

I sell a bus machine Prochera DSB. Year of construction 2005. 2-sided spindle fi.30 x max. 220mm. Main motor 1.1 kW. Buerste included. Weight 90 kg. Available the same.

New brushing machine KUSING K2L-600e, machine manufactured in Slovakia, in Europe by a company with more than 30 years of experience with woodworking machines. Working width 400mm Working height up to 310mm (with brushes Ø 250mm) 2 working heads 2x 4kw Feed speed 2-12 m/min. Suitable for brushes Ø 250mm, L 400mm, D 40mm. Motorized spindle lift. Weight 1250 kg. The machine of the highest and heaviest category, suitable for serial production and heavy work.

Sheet deburring machine make KUNZ type K 2Machine -No: 3126Max. Sheet thickness: 8.0 mmBrushes: 2Brush diameter: 300 mmMotor power: 2 x 2 kVADimensions L x W x H: 1000 x 700 x 600 mmWeight approx: 150 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

SPECIFICATIONS: 2 brushing units Width transport carpet mm: 400 Workpiece height mm: 10 - 120 Feed speed m/min: 8-12 Installed capacity KW: 2.0

Brushes + grinding machine Erma Fabr. Erma Type. DG 243 Engine. 1.5 kW Turn. 1430 rpm

Connected load: 16kW, documentation available.

I sell the Flader Orbitalbuerstmaschine. Model Quickwood Fladder System Working width 1060mm. Mechanically adjustable rotazion and feed speed. Cheap for rustic bushes and patina surfaces. Profiles possible. Made in Denmark Hansen - Hundebol AS

Fabr. UniSanding built year 2000 with 2 x motors 2.3 Kw with 2 brushes Arb. Width -1300 mm Arb. Height 130 mm Constante table with Vackum

- Producer Venjakob - Working width 1300 mm - Max. part height ~ 30 - 150 mm - With ionisation half-coil on top - Zur Montage auf einen Transport oder Schleifmaschine - Connecting piece 2 x 180 mm - Voltage / HZ 400 / 50 - Location - Spannungsschwankungen max. +/- 5 %

Permanent magnet Brushless Servomotor SIEMENS with ALPHA Spur Gear Type:1FT6105-8SF71-3EG1 Series No. YF P921 8717 03 001 Year of construction: 2002 Nominal torque = MO: 54/65 Nm Rated current = Io: 36/45 A Speed = n.max.: 4500 rpm Spur gear ALPHA Type: SP 210-MF2-20 -021-000 Shaft diameter 75 mm Shaft stump length 105 mm Centering diameter 180 mm Centering diameter length 35 mm Pitch circle diameter 250 mm / 4 x 17 mm Bores Case dimensions L/W/H 725 x 225 x 225 mm Weight: approx. 120 kg good condition Removed from a functional special machine, tested before removal.; used

Type SM/1400 Working width 1400 mm Working length 3500 mm Working thickness 5-150mm Sanding roller speed control 420-960rpm Feeding speed 0-30 m/min Total motor power 35,7 kW Disc motor 5,5 kW-2 Cross motor 0,37 kW -2 Feeding power 1,3 kW Up and down motor 0.25kW-2 Vacuum table (no hoses) Made in Italy 1988m/y/ g Transport dimensions 5200x2900x1900mm Weight 3100 kg Price 7999 Eur (EXW Jonava, Lithuania)

Fladder SC 300 / 1000 finish and brushing machine Year of construction: 1991 Manafacture: Fladder System Denmark S/N 560 Machine height 2210 mm Machine width incl. carousel 4000 mm Machine length incl. carousel 4500 mm Working height carousel 800 mm Working width 1200 mm Max. workpiece height 100 mm Flow speed 0.3 - 10.0 m/min. lock-itTM spindles and length 6 x Ø100 x 350 mm Voltage 3 x 400/500V - 50/60Hz Max./Min. fuse 32 A Max. power consumption 15 kW Extraction 2500 m3/h Net weight 1700 kg

SPECIFICATIONS: Max. machining width: 800mm Working height: 150mm Installed power Kw: 3.0 2 brushing units consisting of 4 counter-rotating brushes Ø250mm x 220 mm Transport carpet with speed control Controller

- Producer Venjakob - Working width 1300 mm - Max. part height ~ 30 - 150 mm - Heightadjustment, manually - Zur Montage auf einen Transport oder Schleifmaschine - ohne Schaltschrank - Connecting piece 2 x 120 mm - Total connection power Bürstenantrieb 1,5 kW - Voltage / HZ 400 / 50 - Location - Spannungsschwankungen max. +/- 5 %

Inv. Num. : 6823 Type: Twingo 600 BBB Producer: HOUFEK Created: 2022 Parameters: Max. speed: 1140 1/min Passage width: 600 mm Max. workpiece height: 300 mm Belt speed: 4.5/9 m/min Tool diameter: 120-300 mm Machine weight: 1220 kg

Carbon brushes, motor carbons in a set PAGUS G163 Grinding surface: 16 x 12.5 mm connection: 1 x 80 mm pole piece: M6 Set consists of 10 carbon brushes ! New ! Dimensions (set): 130 x 65 x 25 mm

Carbon brushes, motor carbons in set PAGUS G187 grinding surface: 32 x 16 mm connection: 2 x 80 mm pole piece: M6 Set consists of 6 carbon brushes ! unused ! Dimensions (set): 130 x 100 x 40 mm

Side broom Kärcher 6.903-380.0 Dimensions: 450 x 450 x 150 mm Weight: 1.7 kg

Carbon brushes, motor carbons in a set PAGUS G130, G162 ( G130,G162 ) W14439 Grinding surface: 30 x 8 mm connection: 1 x 60 mm Connector Set consists of 10 carbon brushes ! unused ! Dimensions (set): 120 x 60 x 50 mm

Side broom Kärcher 6.905-624.0 Dimensions: 450 x 450 x 150 mm Weight: 1 kg

Carbon brushes, motor carbons in a set PAGUS G130, G162 ( G130,G162 ) W14439 grinding surface: 30 x 8 mm connection: 1 x 60 mm Connector Set consists of 30 carbon brushes ! unused ! Dimensions (set): 240 x 90 x 40 mm

Carbon brushes, motor carbons in set PAGUS G130, G162 ( G130,G162 ) W14439 grinding surface: 30 x 8 mm connection: 1 x 60 mm connector Set consists of 50 carbon brushes ! unused ! Dimensions (set): 220 x 200 x 50 mm

Carbon brushes, motor carbons in a set PAGUS G130, G162 ( G130,G162 ) W14439 grinding surface: 30 x 8 mm connection: 1 x 60 mm connector Set consists of 100 carbon brushes ! unused ! Dimensions (set): 220 x 220 x 60 mm

Carbon brushes, motor carbons in set PAGUS G130, G162 ( G130,G162 ) grinding surface: 16 x 10 mm connection: 1 x 60 mm Connector Set consists of 20 carbon brushes ! unused ! Dimensions (set): 150 x 100 x 30 mm

Carbon brushes, motor carbons in set PAGUS G130, G162 ( G130,G162 ) Grinding surface: 16 x 10 mm connection: 1 x 60 mm Connector Set consists of 200 carbon brushes ! unused ! Dimensions (set): 220 x 220 x 70 mm

Carbon brushes, motor carbons in a set PAGUS EG8067J CARBONE 323250Z Grinding surface: 32 x 32 mm Connection cable: 4 x 120 mm Pole piece: M8 Set consists of 10 carbon brushes ! unused ! Dimensions (set): 200 x 160 x 80 mm

Type 1300-2S Working width 1300 mm Min.working length 400 mm Working thickness 2-80mm Grinding roller speed - Frequency control Feeding speed 5-20 m/min Total motor power 6.27 kW Transport dimensions 1700x2100x1400mm Weight 1200 kg Price 6100 Eur (EXW Jonava, Lithuania) Specifications Type 1300-2S Working width 1300 mm Min. Working length 400 mm Working thickness 5-140mm Grinding shaft speed – adjustable by frequency converter Feed speed 5-20 m/min The total power of the motors is 6.27 kW Dimensions for transportation 1700x2100x1400mm Weight 1200 kg Price 6100 Eur (EXW Jonava, Lithuania)

Type 1000-2S Working width 1000 mm Min.working length 400 mm Working thickness 2-80mm Grinding roller speed - Frequency control Feeding speed 5-20 m/min Total motor power 4,12 kW Transport dimensions 1700x1600x1400mm Weight 800 kg Price 4130 Eur (EXW Jonava, Lithuania) Specifications Type 1000-2S Working width 1000 mm Min. Working length 400 mm Working thickness 5-140mm Grinding shaft speed – adjustable by frequency converter Feed speed 5-20 m/min The total power of the engines is 4.12 kW Dimensions for transportation 1700x1600x1400mm Weight 800 kg Price 4130 Eur (EXW Jonava, Lithuania)

Manufacturer: Busch Schleifbürste Rotationschleifbürste, Type: Robatech 1300, Year: 2014, Control: Siemens, Software: Busch, Monting of the machine: 1 Schleifbürstenband, Number of units: 1, Working widht mm: 130, Through running hight max mm: 0-80, Number of rotations controlled: 30-140 m/min, Units mounted upright: Rotation 360 Grad, Fast exchange device: Bürstenbesätze, Through running hight max mm: 0-80, kW output motor: 5,5 Bürste/, Feeding speed continous adjustable: 4-12, Weight approx. kg: 3500, Required space L x W x H mm: 3840 X2400 X2000, Year :2014

Hersteller : Fladder, Type: Gyro 300, Year: 1996, Number of units: 6, Engine power - kW: 12, Diameter of brushes: 320, Number of rotations controlled: yes, Fast exchange device: yes, Axle-diameter: 60, Vacuum belt: yes, Feeding speed continous adjustable: yes, Gewicht ca. kg : 2500, Year :1996

Manufacturer: Quickwood, Type: RO 1300/1T, Year: 2000, Control: yes, Number of units: 1, Working widht mm: 1300, Through running hight max mm: ca. 100, Through running hight max mm: ca. 100, kW output motor: ca. 3, Weight approx. kg: 1500, Required space L x W x H mm: 2180x1850x2100, Year :2000

Manufacturer: Bürkle, Type: Bürste, Working widht max mm: 1300, Diameter of brushes: 150,