bruderer bsta 80 used for sale

Bruderer BSTA 18 600 spm High-performance speed from 100-600 spm Force Max 180 KN Adjustable stroke New Silicon control Pneumatic and hydraulic all new Strip width max 190 mm Feed Bruderer BBV With digital stroke counter with programmable auto stop and digital speed counter Overhauled, very good condition, ready to work.

Pressing plate of BRUDERER BSTA 41 type W x D x H = 660 x 550 x 95 mm Hole = 500 x 100 mm

Stroke power: 180 KN (18 tons). Adjustable speed: 100 - 600 strokes per minute. Adjustable stroke: 4 - 36 mm. In very good working condition. Feeder: BBV 60/60 Max. Strip Width: 60 mm. Max. Feeding Length: 60 mm. Max. Thickness: 2 mm. With stroke and speed counter. Programmable speed, number of strokes etc. Three working modes: manual, one stroke and automatic. Heavy Duty, for non stop production. Pneumatic clutch and brake. Machine with warranty 6 months. Machine dimensions: 600 mm x 600 mm x 1850 mm. Machine weight: approx 1.2 tons. Power consumption: 2.2 KW. Technical Air: 8 bar.

Bruderer press. Year of production: 1985 Condition: perfect The press has a soundproofing cabin and a roll feeder.

Bruderer Automatic Precision Punching Press. Type: BSTA 110H. Max. Pressure: 1100 kN (110 T). Speed range: 100 – 800 spm. Year of production: 1976. Fitted with roller-gripper feed unit BBV 320/200 on left-hand side. Max. strip width: 400 mm. Max. strip thickness: 12 mm. Max. feeding pitch: 200 mm. Adjustable stroke: 16-75. Ram height adjustment: 89 mm. Max. Tool width clearance between columns: 1170 mm. Weight of machine: cca. 26000 kg. Electrical cabinet and control. Oil pump. Oil cooler. Fitted with spring feet dampers. Front and rear safety guards with inspection glass.

Press capacity: 30 ton Ram stroke adjustable: 16 - 40 mm Slide adjustment: 40 mm Shut height (stroke down, adjustment up): 230 +/- 20 mm Free lateral opening F-B: 170 mm Table surface area : 480 x 450 mm Slide area: 250 mm Number of strokes: 100 - 600 s.p.m. Required power: 5,5 kW Dimensions L x W x H: 2.150 x 1.200 x 1.160 mm Weight of machine approx.: 2,5 ton

Press capacity: 50 ton Ram stroke adjustable: 16 - 51 mm Slide adjustment: 64 mm Free frontal opening L-R: 1100 mm Free lateral opening F-B: 250 mm Table surface area : 1080 x 650 mm Slide area: 980 x 420 mm Hole in table: 1060 x 200 mm Number of strokes: 100 - 750 s.p.m. Required power: 22 kW Height over floor approx.: 2471 x 1278 x 3150 mm Weight of machine approx.: 9 ton

Max. stroke speed: 600-2000/min, feed: 10-80mm, with oil cooler.

Max. pressing force: 30t, stroke speed: 100-600/min, stroke adjustment: 8-40mm, length: 1200mm, width: 1160mm, height: 2150mm, weight: 2.5t.

Max. pressing force: 30t, stroke speed: 100-600/min, stroke adjustment: 8-40mm, length: 1200mm, width: 1160mm, height: 2150mm, weight: 2.5t.

Max. pressing force: 30t, stroke speed: 100-600/min, stroke adjustment: 8-40mm, length: 1200mm, width: 1160mm, height: 2150mm, weight: 2.5t.

Max. pressing force: 30t, stroke speed: 100-600/min, stroke adjustment: 8-40mm, length: 1200mm, width: 1160mm, height: 2150mm, weight: 2.5t.

Max. pressing force: 30t, stroke speed: 100-600/min, stroke adjustment: 8-40mm, length: 1200mm, width: 1160mm, height: 2150mm, weight: 2.5t.

Max. pressing force: 30t, stroke speed: 100-600/min, stroke adjustment: 8-40mm, length: 1200mm, width: 1160mm, height: 2150mm, weight: 2.5t.

Max. pressing force: 30t, stroke speed: 100-600/min, stroke adjustment: 8-40mm, length: 1200mm, width: 1160mm, height: 2150mm, weight: 2.5t.

Max. pressing force: 250kN, stroke: 13-38mm, stroke speed: 875-1500/min, connected load: 20kW.

Pressing force: 40t, stroke adjustment: 13-57mm, ram adjustment: 60mm, stroke speed: 60-1200/min, connected load: 15kW, weight: 6t, with documentation, an inspection is possible.

pressure: 20 t stroke: 8-38 mm no. of strokes: 100-1800 Hub/min table surface area: 400x400 mm table pass: 380x80 mm table height: 1000 mm weight of the machine ca.: 4 t dimensions of the machine ca.: BxTxH 1600x1600x3100mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 125 t plate thickness: 2 mm no. of strokes: 100-1000 Hub/min Control: Bruderer total power requirement: 50 kW weight of the machine ca.: 23 t dimensions of the machine ca.: ca. B 3 x L 6 x H2,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bruderer BSTA200M High-performance automatic punching press. Max. pressure: 200 [kN] (20 [T]). Speed range: 100 - 1800 [spm]. Year of manufacture: 1996. Feed BBV 101/75 on the right-hand side. Max. strip width: 125 [mm]. Max. feed distance: 75 [mm]. Adjustable stroke: 8; 13; 19; 25; 32; 38; 44; 51 [mm]. Ram height adjustment: 51 [mm]. Dimensions of the clamping plate (clamping plate): 510 x 400 [mm]. Bed opening: 400 x 160 [mm]. Mbawvyqg Max. distance of the mold width between the columns: 410 [mm]. Max. strip passage width: 260 [mm].= Connected load: 36 [kVA]. Power 400 [V] 50 [Hz]. Control voltage: 24 [V]. Machine dimensions: H 2540 x W 1661 x D 855 [mm]. Machine weight: approx. 3100 [kg]. Control cabinet and control system. Including all original technical documentation. Also high-speed presses in stock: Mabu, Schaal, Bihler and other Bruderer models.

Key data: 30 t, 100 1/min

Specifications Pressing force 30 t Stroke rate 100 – 600 mm Plunger stroke adjustable up to 40 mm Installation height 300 mm with built-in clamping plate

pressure: 20 t total power requirement: 20 kW weight of the machine ca.: 5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure:030 t stroke:8 - 40 mm no. of strokes:100 - 600 /min distance between columns:325 mm distance table/ram, max. stroke up, adjustment up:250 mm table surface area:540 x 300 / 325 x 395 mm hole in the table:315 x 110 mm table height over floor:1000 mm column travel -side:290 mm ram surface:250 mm material width of feeder:120 mm material thickness of feeder:3,0 mm feed length:60 mm power requirement:5,5 kW weight:2,6 t Dimensions (WxDxH):1,5 x 1,2 x 2,2 m clutch:pneumatic roll feed:mechanical, Bruderer BBV 120/60

CONTROLS   conventional PRESS FORCES   total force (nominal): 20 to SLIDE (MECHAN. PRESS)   stroke adjustment: yes   stroke min.: 8 mm   stroke max.: 38 mm   variable speed: yes   stroke rate (min.): 100 /min   stroke rate (max.): 1800 /min STRIP-FEEDER   feeder type: roll feeder ELECTRICAL SPECIFICATIONS   total power consumption: 20 kW DIMENSIONS / WEIGHTS   total weight approx.: 3600 kg Coil Reel&Straightener KOHLER (option)

PRESS DESIGN   drive system: eccentric / crank PRESS FORCES   total force (nominal): 30 to PRESS TABLE   table surface (left-right): 480 mm   table surface (front-back): 428 mm SLIDE (MECHAN. PRESS)   slide adjustment: 40 mm   stroke adjustment: yes   stroke min.: 8 mm   stroke max.: 40 mm   variable speed: yes   stroke rate (min.): 100 /min   stroke rate (max.): 600 /min TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 220 mm STRIP-FEEDER   feeder type: roll feeder   feeding step min.: 20 mm   feeding step max.: 100 mm ELECTRICAL SPECIFICATIONS   total power consumption: 4.5 kW   mains voltage: 380 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/ri ...

Press capacity: 25 ton Ram stroke adjustable: 13 - 38 mm Slide adjustment: 51 mm Shut height (stroke down, adjustment up): 230 - 281 mm Max. die size: 430 x 360 mm Number of strokes: 100 - 1.500 s.p.m. Table surface area : 530 x 530 mm Required power: 18 kW Dimensions L x W x H: 2.075 x 1.355 x 2.620 mm Weight of machine approx.: 4,5 ton feeding speed: sheet width: 200 mm

High speed press Original Manufacturer by: BRUDERER Type: BSTA 30 Technical data: Stroke power 300 KN (30 tons) Adjustable speed 100 - 600 strokes per minute up to 10 strokes in one second Equipped with synchronized BBV feeder Feed pitch up to max. 60 mm adjustable, highly accurate With PLC control Three working mode: single punch, complete stroke and full automatic Emergency stop Pneumatic clutch and brake Weight approx 2.5t Automatic in feed, fully synchronized with punching moment Tool and coiler not included (price on request) Technical Air 8 bar Operators instruction manual Machine with new CE certificate Overhauled - Rebuilt by Silicon plus

Capacity: 0 t Number of strokes per/min: 0   Table length: 0 mm Table width: 0 mm CNC Brand: 0 CNC Model: 0 Operating hours: 34925 Technical data Pressure: 60 to Stroke: (stepless) from: 70 s/min up to: 800 s/min Execution: 4 supports Table surface: Length: 770 mm Width: 620 mm Thickness: 120 mm Table relieving: Length: 580 mm Width: 100 mm With pressing power: downside up Slide adjustment: 80 mm Stroke adjustment: from: 20 mm up to: 76 mm Slide clamping surface: Length: 700 mm Width: 456 mm Passage between the supports: longitudinal: 650 mm Lateral: 260 mm Air connect: 6 - 10 bar Voltage 50 Hz 3x: 400 Volt Total power required: 41 kVA Machine´s weight about: 7600 kg Overall dimensions machine: Length: 2600 mm Width: 2100 mm Height: 2200 mm Various accessories: Belt feeding: SOPREM Workpiece conveyor Sound insulation cabin Chip conveyor

sheet width: 0 mm plate thickness: 0 mm plate length: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

very well preserved automatic machine with/without motor reel

Cat. No. 11-3600-6 new Storage Vessels / Stackable Tanks in AISI 304 with Cooling Jacket 800 + 800 Litres Standard Equipment: 3 Feet Level Indicator Tank Inlet on the Top NW 50 Diameter 920 mm Bottom and Top in Conical Shape Surface: inside IIID and outside marbled Discharge Outlet NW 50 Connection for Clap DN 50 Manhole on the front in oval shape 300 x 435 mm – pressed-in Volume: on the ground: 800 litres on the top: 800 litres Height on the ground: 1835 mm Height on the top: 1550 mm Total height: 3385 mm Surcharges/unit: Butterfly Valve DN 50 Clap Gr.37 Tapping Pipe for Clap Gr. 37 with Butterfly Valve NW 40=Clear Discharge Sample Valve Mixer 0,37 kW, 400 V, 1370 rev/min with connector for Clap size 37 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: ...

Robust fine rolling mill with 800 mm roll width and 800 mm roll diameter, incl. main drives, auxiliary drives, control cabinet and hydraulic unit for splitting. In regularly maintained condition, rollers without riefen. Available for an extra charge: Matching dust filter from Hellmich.

Fine rolling mill with 800 mm roll width and 800 mm roll diameter, incl. main drives and auxiliary drives, split adjustment manually. In regularly maintained condition, rollers without riefen. Available for an extra charge: Matching dust filter from Hellmich.

Roller crusher with 800 mm roller width and 800 mm roller diameter, incl. roller drives, auxiliary drives, switch box and hydraulics power pack for gap adjustment. In regularly maintained condition, rollers without ridges. Available at extra charge: Suitable dust filter by Hellmich.

Roller crusher with 800 mm roller width and 800 mm roller diameter, incl. main roller drives and auxiliary drives, manual gap adjustment. In regularly maintained condition, rollers without ridges. Available at extra charge: Suitable dust filter by Hellmich.

Welding table, straightening table, straightening flap, work table, clamping table measuring plate, lapping and control plate PAGUS working surface: 800 x 800 mm working height: 100 mm Dimensions: 800 x 800 x 100 mm

Clamping table PAGUS Clamping area: 800 x 800 mm 8 grooves Groove width: 18 x 31 mm center groove: 28 x 9 mm bore: 32 mm 32 mm deep (not rotatable, counterpart missing) used, tested ! Dimensions: 800 x 800 x 220 mm

Seal kit flap / KPL XOMOX CRANE 750 - 800/10, 800 - 81 for high-performance butterfly and control valve type 800 nominal diameter: DN 750 - 800 Pressure rating: PN 10 seat material: Firesafe Shaft seal: Graphite New ! Dimensions ( packaging ): 960 x 960 x 50 mm

S/s smoke trolley, dimensions: 800 mm x 800 mm x 1800 mm.

Technische Daten: - Rollendurchmesser    800 mm - Schnitthöhe         max. 400 mm - Arbeitsstisch    1290 x 800 mm - min. Lamellenstärke        2 mm - Tolleranz                  +/- 0,15 mm - Sägebandbreite max. 54 x 0,9 mm - Sägebandlänge min./max. 5530/5380 mm - Motorleistung 15 kW - Spannung 400 V, 50 Hz - Motorleistung Vorschub 0,37 kW - Höhe des Vorschubtteppisch 300 mm - Anschlaglänge des Vorschubteppisch 750 mm - Andruckrollen Durchmesser 160 mm - Durchlassbreite vom Vorschubteppich zum Sägeband 200 mm - Durchlassbreite vom Sägeband zu den Andruckrollen 200 mm - stufenlose Vorschubgeschwindigkeit  0-30 m/min. - manuelle Anschlagpositionierung mit digitaler Anzeige - automatische Stern-Dreieck Schaltung - Radbremsung pneumatisch - obere und untere Sägebandführung - obere Sägebandführung verstellbar über Zahnstange - automatische  ...

Technische Daten: - Schnittbreite 800 mm - Schnitthöhe 470 mm - Sägebandlänge 5611 x 19-50 mm - Schnittgeschwindigkeit 20 m/s - Tischabmessung 900 x 700 mm - Tischhöhe 930 mm - Sägetischneigung -5C bis +45C - Absaugstutzendurchmesser 100 mm - Durchmesser der Laufrollen 810 mm - Motor-Leistung 5,5 kW - Spannung 400 V - Maschinenabmessung (B x T x H) 1300 x 750 x 2506 mm - Transportabmessung L=2500, B=730, H=1280 mm - Gewicht 550 kg komplett mit: - gummierte und präzisionsgelagerte Laufräder ermöglichen geräuscharmen Betrieb - Aluminiumanschlag mit Schnellklemmung - Maßskala am Anschlag mit 2 Lupen zum genauen Ablesen und Einstellen - Schnitthöhenverstellung einfach und schnell über Handrad- Zahnstangenkombination einstellbar - Sägebandbreite von 19 mm bis 50 mm möglich - schrägstellbarer Arbeitstisch von 0C - 45C über Präzisions- Schneckengetriebe - 2 Anschlußmöglichkei ...

Technische Daten: - 8 Aggregate - Arbeitsbreite min./max. 300 - 2500 mm - Arbeitshöhe min./max. 10 - 120 mm - Vorschub stufenlos regelbar 6 - 36 m/min - Motor Vorschub 4,0 kW - Motor Breitenverstellung 0,75 kW - Gesamtanschluss 47,0 kW - Spannung 400 V / 50 Hz - Absaugstutzen FI 8 x 120 mm - PLC + touch screen Steuerung - Transportkette mit Nocken, Abstand 500 mm - Einlauflänge 1500 mm für Paneele / Dielung / Möbelplatten / Türen Vorritzsäge: - Motor 2,2 kW - Drehzahl 3000 Upm. - Sägeblattaufnahme FI 30 mm - Sägeblatt FI min./max. 160 - 200 mm Ablängsäge:(Zerspaner) - Motor 5,5 kW - Drehzahl 3000 Upm. - Sägeblattaufnahme FI 30 mm - Sägeblatt FI min./max. 200 - 300 mm 1. Frässpindel: - Motor 5,5 kW - Drehzahl 7500 Upm. - Frässpindelaufnahme FI 40 mm - Werkzeug FI min./max. 108 - 180 mm - jumping (pneumatisch gesteuertes Ein- und Austauchen) 2. Frässpindel: - Motor 7,5  ...

1X Electrical power (Kw 0.73), Centrifugal force(kg) 680, Sieving decks 1 and sieve area (m2) 0.36

Technische Daten: - Vorschub + Auf / Ab - Sägekopf elektrisch regelbar - 2-teiliger Grundrahmen - Bedienersitz - Wenderollen - Stammspanner - zusätzliche Stammauflagen - Sichtlineal - Kreisskala - mechan. manuell verstellbare Sägeblattführung - max. Stammdurchmesser 800 mm - max. Schnittlänge 11 m - Hauptmotor 10 kW - Vorschubmotor 0,55 / 1,05 kW - Hubmotor 1,1 kW - Sägeband L= 4010 bis 4140 mm, B=30 bis 35 mm -Vorschubgeschwindigkeiten: 1. Stufe: 2,2 bis 4,5 m / min 2. Stufe: 4,5 bis 9,0 m / min 3. Stufe: 7,0 bis 9,0 m / min 4. Stufe: 14,0 bis 28,0 m / min - Gesamtgewicht ca. 1250 kg - Abmessungen L=13,0 m x B=2,05 m x H=1,35 m

Technische Daten: - max. Arbeitsbreite 800 mm - automatischer Arbeitsablauf in X-Achse - Linearführungen in X-Achse mit Staubstutz - manuelle Verstellung der Z-Achse - Magnetspanntisch 120 x 820 mm - Schleifwinkel +/- 90C - Drehzahl Schleifscheibe 2800 U/min - Schleifscheiben FI 150 x 60 x 32 mm - Vorschubgeschwindigkeit 0-10 m/min - Motor 1,5 kW / 400 V - Motor Vorschub 60 W - Motor Kühlmittelpumpe 40 W - Kühlmitteleinrichtung verhindert ein Überhitzen der Messer - Halogenlampe mit verstellbarer Halterung - Gleitmittelpumpe mit Zentralschmierung - Abmessungen L=1700, B=900 mm, H=1350 - Gewicht 300 kg

We have for sale: 1 Holec SVS switchgeaar 17,5kV 800Amp busbar 3 motorized breaker feeders with Stucke protection relays 1 x fused loadbreak switch

1 mixing arm with bottom discharge screw all stainless steel right-left turn 1 speed dimensions (l x w x h) : ± 2.500 x 1.050 x 1.700 mm with new control box + control (Siemens logo) all new cables

Cell wheel lock made of noble steel unused KREISEL Environmental Technology Type: ADG 630 x 800 x 21-24 Z Built: 2005 Inlet opening: approx. 800 x 500 mm Outlet opening: approx. 800 x 500 mm Cell wheel diameter: 630 mm Number of cells: 12 Cell depth: approx. 200 mm Cell wheel made of stainless steel Housing made of steel Geared motor : SEW-EURODRIVE Type :RF107 AR132S/MWEX/II3GD DV132M4/TFII36D 7.5 kW 24 rpm 230/400 V IP65 Motor Ex protected! Total dimensions: approx. 2700 x 800 x 800 mm

For sale we offer new scissor roller conveyor. Roll width 610mm Length retracted 3000mm Length extended 8000mm Height 690-1000mm Load capacity 130kg/m Available quantity: 2 pieces Other lengths available in stock: 4 and 10m Shipping worldwide Price per piece 6.700€ net plus VAT If you are interested, please contact us to confirm availability.