brother tc used for sale

Table clamping surface: 2 x 350 x 300 mm traverse path x/y/z: 700/300/250 mm spindle retainer: BT 30 ISA kl. / gr. Table/spindle distance: 450 mm spindle speeds: 6-6000 rpm number of tool stations: 10 pieces feeds: 5-10000 mm / min rapid traverse: x & y/z 25/20 m / min spindle drive: 3,1/4,1 kW Electr. Supply: 400 V kW weight: 2600 kg

Table clamping area: 300 x 500 mm Travel x/y/z: 420/300/250 mm Spindle holder: BT 30 ISA small/gr. distance table/spindle: Spindle speeds: approx. 10 - 10000 rpm Feeds: approx. 5 - 10000 mm/min Rapid speed: x u. y/z 25/20 m/min Spindle drive: 7 kW electr. Connection: 400 V, approx. 9 kVA kW Space requirement: 2650 x 1400 x 2450 mm Weight: approx. 2800 kg

Vertical machining center TC-32BN QT :::TECHNICAL SPECIFICATIONS::: CNC Model: Brother - CNC Version: B00 - Tool Holder: BT 30 - Spindle Power: 11Kw - Number of Spindle Revolutions: 12000 Number of tools: 26 - X-axis travel: 550mm - Y-axis travel: 400mm - Z-axis travel: 415mm - Rapid feeds for linear axes X Y Z: 70m/min Guides: roller CNC divider: yes Divider brand and model: No. 2 NIKKEN Rotation: Continuous Pallet change: yes Pallet size: 600 x 425mm Maximum allowable load: 200Kg Round pallet: yes High refrigerant pressure: yes Chip conveyor: belt Machine equipment: Renishaw probe ready :::D DIMENSIONS AND WEIGHT::: Length: 1890mm Width: 3669mm Height: 2360mm Weight: 4600Kg

Inv. Num. : 8729 Type: TC 215 Producer: Brother Generated: Parameters: Work table length: 500 mm Work table width: 220 mm Maximum table load (even): 75 kg Maximum vertical spindle speed: 10000 1/min X-axis travel: 300 mm Y-axis travel: 220 mm Travel Z-axis: 200 mm Number of all tools: 10 pieces Machine height: 1901 mm Machine length: 2430 mm Machine width: 1200 mm Machine weight: 1300 kg Equipment: Tool Holder

CNC controller: BROTHER Axes X-axis travel mm: 450 Y-axis travel mm: 320 Z-axis travel mm: 410 Worktable Table dimensions mm: 550x350 Spindle Spindle speed rpm: 12000 Tool system Tool holder: BT-30 Tool magazine slots: 26

Find more here - / Contact us at -

A machining center with 10-station tool changer is offered. Table clamping surface X/Y: 600mm/300mm, travel X/Y/Z: approx. 420mm/300mm/250mm, spindle speed: 6000rpm. Tool holder: BT30. Control: Brother CNC-400, machine weight: approx. 2000kg, including manual. Inspection possible by appointment.

This Brother TC 32B Vertical Machining Center was built in Japan in 2007. Equipped with a Brother control unit, this machine incorporates 3 + 1 axis and a rotary table. Its BT30 spindle can operate with a speed up to 12000 rpm.

This 4-axis Brother TC-32BN QT was manufactured in 2008, featuring a Brother B00 control system, X-axis travel of 550 mm, Y-axis travel of 400 mm, and Z-axis travel of 415 mm. It boasts rapid traverse rates of 70 m/min, a spindle speed up to 20,000 rpm, and a tool magazine with 40 positions. Consider the opportunity to buy this Brother TC-32BN QT vertical machining centre. Contact us for more information about this machine.

Vertical Drilling and Milling Center Brother TC-22A with 4th Axis Year of Make: 1999 Control: Brother Technical data: Spindle speed: max. 12,000 rpm Tool holder: BT 30 Number of magazine slots: 26 Travels: X-axis: 500mm Y-axis: 400m Z-axis: 410mm 4th axis: 0.001° Accessories: Nikken Rotary Table Base plate zero point clamping system We have 2 identical machines in stock.

Naehmaschine Brother Exedra E-100 Mark II, Foot Lifter FB II, MD-816B; You buy an industrial naehmaschien from Brother Naehmachine Brother Exedra E-100 Mark II, Foot Lifter FB II, MD-816B, DB2-B737-413 380V

Control Other Brother C00 Speed [rpm] 10000 Travel X/Y/Z [mm] 700/400/300 Tool pick-up BBT 30 Main spindle: Technology Direct Drive Speed 10,000 rpm Power (max.) 26.2 kW Torque (max.) 92 Nm Tool holder BBT 30 Work table: Clamping area 800 x 400 mm Table load (max.) 250 kg General: Tool Magazine 21 Stations Rapid traverse in X/Y/Z 50/50/56 m/min Equipment/accessories: Chip Management Chip Conveyor Coolant Management Minimum Quantity Lubrication (IKZ), Fabr. Lubrix V5 4th axle Lehmann EA-510 with counter bearing Workpiece Clamping Hydraulic, 80-210 bar Support Control Pneumatic Automation Preparation I Automatic Work Area Door (Electric) Automation Preparation II Robot Interface Oil Mist Extraction Mechanical Separator, Fabr. Sara UC1 SD Stand riser 150 mm Setup operation Electronic handwheel Further equipment transformer

Used machine in good condition. Available for immediate delivery. - Rapid Traverse (X x Y x Z): 30.000 mm/min - Rapid Traverse (X x Y x Z): 650 x 400 x 305 mm/min - Number of tool stations: 22 - Spindle taper: BT-30 - Spindle power : 7,4 kW - Max. spindle speed: 16.000 rpm - Max. tool diameter: 80 mm - Max. tool weight: 3 kg - Coolant tank capacity: 200 l - Dimensions (long x wide x high): 3.248 x 1.837 x 2.696 mm - Weight: 3.500

Sewing machine Make Brother Model TZ1-B652 Year unknown Capacity will do leather and fabrics Details has been used for menu cards covers with leather onto board. The unit appears newish Available direct

Key data: 100 mm, 500 mm, 480 mm

Manufacturer: Brother Type: Speedio W-1000 XD1 Commissioning: 2024 Control type: CNC D00 and plain text dialog programming Axles: 4 X-travel: 100 mm Y-travel: 500 mm Z-travel: 480 mm + stand elevation 150 mm 4.Axis 360° Spindle speed: 16 -16000 rpm Spindle adapter cone: BBT-30 (BT-30) Tool stations: 21 (high-speed tool changer) Optional extras: Internal coolant supply 15 bar with self-cleaning pre-filter system Coolant tank 150 litres "Twin" chip disposal system for coarse and fine chips incl. filter system Automatic side door for robot loading Emulsion mist extraction for working area 700 m³/h CNC rotary table Brother T200 Ad.L clamped with counter bearing 2 x rotary union 4-flow Workpiece clamping hydraulic 80-210 bar Tool breakage monitoring Renishaw Laser Robot interface Part clamping control via differential pressure sensors (2-fold) ...

Brother Hi-Spin riveting machine 5mm high spin Type: BR1-103 - Crimping ability (Mild steel rivet) φ5mm or less - Spinning head: 20-40mm - Distance between tabletop and punch: 60-180mm - Table working surface size: 310 x 180mm - Processing time setting range: 0.3-5 seconds - Normal pressure: (Varies depending on pressing conditions) 2-5kg/cm2 Air consumption: Power supply and motor Three-phase 200V 0.2kw 4Pole Machine size Width 390 x depth 510 x height 1000mm Machine weight 95kg

This 5-axis Brother HS-70A wire EDM machine was manufactured in 2003. It features a CNC-A50 control, working strokes of 410 x 260 x 170 mm, and can handle workpieces up to 350 kg. The wire diameter ranges from 0.1 to 0.3 mm, supporting precise cutting. If you are looking to get high-quality EDM capabilities, consider the Brother HS-70A machine we have for sale. Contact us for more information about this machine.

This 5-axis Brother Speedio M 300 X3 vertical machining center was manufactured in 2024. It features a CNC-C00 control unit, with travel dimensions of 300 mm on the X-axis, 440 mm on the Y-axis, and 305 mm on the Z-axis. The machine supports a spindle speed of up to 16,000 min⁻¹ and a rapid traverse rate of 50 m/min. It has a tool storage capacity of 22 tools. Consider the opportunity to buy this Brother Speedio M 300 X3 vertical machining center. Contact us for more information.

I'm selling parts for a Brother TC-31A pallet milling machine (year 2000). All components are available, including: - indexers (4th axis), - screws and mechanical components, - electronics modules, - motherboards, - tool magazine, - motors, - servos, - and many other components. For pricing on individual parts, please contact me.

x-travel: 1000 mm y-travel: 500 mm z-travel: 300 mm Control: CNC C00 spindle turning speed - stepless: 10000 U/min spindle motor: 10 kW distance table - lower edge spindle: 180 - 480 mm rapid traverse: 50 m/min table surface area: 1100 x 500 mm total power requirement: 9,5 kW weight of the machine ca.: 3,3 t dimensions of the machine ca.: 2,5 x 2,4 x 2,5 m - CNC control CNC-C00 - ATC 14-tools (BT 30) - Coolant through Spindle less than 5000h The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Brother Speedio S700X2Year of manuf. : 2022 Control : Sonstige Brother C00 Speed : 10000 rpmMovement X/Y/Z : 700/400/300 mmTool holder : BBT 30 ____________Description:Mainspindle:Technology:DirectdriveSpeed:10.000 rpmPower (max.):26,2 kWTorque (max.):92 NmTaper:BBT 30Workingtable:Clampingsurface:800 x 400 mmTableloading (max.):250 kgIn general:Toolmagazine:21 StationsRapid travers in X/Y/Z:50/50/56 m/minEquipment/Accessory:Chipmanagement:Chip coveyorCoolingmanagement:Minimumlubrication (IKZ), Company Lubrix V54.-Axis:Lehmann EA-510 with CounterbearingWorkpiececlamping:Hydrulic, 80-210 barContactcontrol:PneumaticAutomationinterface I:Automatic Door (electrical)Automationinterface I:RobotinterfaceOilmistseparation:Mechanical extraction, company Sara UC1 SDColumnextention:150 mmSetup operations:Electronic HandwheelFurther Equipment:Trafo

Manufacturer: Brother Model: GT-361 Year of Manufacture: 2017 Technical Specifications - Voltage: 100V - 240V - Frequency: 50/60 Hz - Current: 0.4 A - Certifications: CE, MET (UL 60950-1, CSA C22.2 No.60950-1), RAM, S - Listing No.: E112529 - ACN: 001 393 835 Find more here - / Contact us at -

MWM TCG 2020 V12-Nr. MWM TCG 2020 V16

Part-turn actuator, pneumatic cylinder, rotary vane actuator, swivel module -Manufacturer: Rotech, TCR module for rotary actuator unused -Type: TCR3MVAZ -Number: 2x module available -Price: per piece -Dimensions: 160/70/H105 mm -Weight: 0.4 kg/piece

AMUTEC TCR S 1200, reel-to-reel pre-cut bags, Construction year 2003,, totally revisioned in 2024 by Constructors technicians, very well maintained

Technical Specifications & Performance Data The Used Tetra Cap Applicator TCA45 is a robust, single-head cap application unit from Tetra Pak®, engineered for reliable operation in beverage production environments and seamless integration within a used bottling line. Purpose-built for continuous industrial packaging, it offers steady output with precise cap application after filling and before packing. Manufacturer: Tetra Pak® Model: TCA 45 TETRA PACK Year of manufacture: 2004 Nominal speed: up to 7,500 bricks/hour No. of heads: 1 Cap type: OEM code 4 (per manufacturer specification) Rotation direction: OEM code 0 (per manufacturer specification) Category: Capping Machine / Cap Applicator Placement: downstream Tetra Pak filling, upstream final packaging Container compatibility: Tetra Pack bricks with appropriate change parts Typical products: water, juice, beer, wine, and other st ...

<br>With near head UNION SPECIAL Maximum sack length: 120 cm<br><br><br><br>Verf Gbar: now

Tetra Pak TCAP/21 1000 ml sl ReCap 3 Applicator We offer: Tetra Pak TCAP/21 ReCap 3 Applicator for 1000 ml slim line Tetra Pak beverage cartons, manufacturing year 2004 - in excellent condition - excellent serviced Available from stock Prior sales reserved

MWM TCG 2016 V 12 Exchange motor / short block with cylinder heads (biogas) Bücker + Essing short block with cylinder heads - crankcase in Exchange (tested according to manufacturer's specifications and repaired) - crankshaft in Exchange including new storage (tested according to manufacturer's specifications and repaired) - piston Squisch new -Liners with Coke wiper ring new -Connecting rods in Exchange including new storage (tested according to manufacturer's specifications and repaired) - cylinder heads in Exchange (tested according to manufacturer specifications and repaired) -Wheel drive including timing chest cover -Oil pump new including oil suction pipe -Oil pan -Oil cooler bundle (new) oil filter (new), closed oil circuit -Camshaft new incl. storage -Torsional vibration damper new -Flywheel housing and flywheel -including paint (RAL 5010) The here offered motor is ...

MWM TCG 2016 V 16 Exchange motor / short block with cylinder heads (biogas) Bücker + Essing short block with cylinder heads - crankcase in Exchange (tested according to manufacturer's specifications and repaired) - crankshaft in Exchange including new storage (tested according to manufacturer's specifications and repaired) - piston Squisch new -Liners with Coke wiper ring new -Connecting rods in Exchange including new storage (tested according to manufacturer's specifications and repaired) - cylinder heads in Exchange (tested according to manufacturer specifications and repaired) -Wheel drive including timing chest cover -Oil pump new including oil suction pipe -Oil pan -Oil cooler bundle (new) oil filter (new), closed oil circuit -Camshaft new incl. storage -Torsional vibration damper new -Flywheel housing and flywheel -including paint (RAL 5010) The here offered motor is ...

MWM TCG 2016 V 12 Exchange unit with complete motor and generator overhauled on basic frame Payment by invoice warranty Bücker & Essing GmbH assumes the warranty exclusively for the delivery volumes supplied by it. A warranty for damages that are not directly related to the delivered and performed thing, as well as a warranty for consequential damages, are expressly not assumed. The warranty is assumed for a further 12 months at the most or until 8000 operating hours have been reached after commissioning, whichever of the two cases occurs first. Regardless of the commissioning date, the maximum warranty period is 15 months after delivery. The warranty case must be notified immediately in writing. Warranty claims can only be asserted if the commissioning and maintenance have been carried out and documented in accordance with the manufacturer's regulations. Commissioni ...

MWM TCG 2020 V 16 Remanufactured Motor / Short Block It is a refurbished short block. Repaired in accordance with the manufacturer's guidelines and the RAL seal of approval. Circumference: - Crankcase incl. new bearing - Crankshaft (Std-dimension) incl. new bearings - Camshafts incl. new bearings - Wheel drive incl. wheel box cover - Flywheel housing - Oil pump with oil suction pipe -Sump - Valve plunger - Oil pressure valve On request, the scope can be expanded (e.g. pistons, liners, cylinder heads, oil coolers, etc.) Further information on the scope and design can be found on our homepage: buecker-essing Removal and installation as well as service for the engine and CHP unit are optionally possible. Please contact us for a written offer. We also have other remanufactured engines, as well as AT cylinder heads, turbochargers, spare parts and other ...

With stitching head UNION SPEZIAL Maximum sack length: 120 cm Available: now

Tipper Tie Technopack TCNV pneumatically operated single-clipper for natural casings, ring-shaped casings, end casings or artificial casings made of collagen, cellulose or PVDC, as well as bags made of polyester, polyethylene or linen The machine is immediately available and can be tested in Koblenz, Germany.

MWM TCG 2020 V 20 Remanufactured Motor / Short Block It is a refurbished short block. Repaired in accordance with the manufacturer's guidelines and the RAL seal of approval. Circumference: - Crankcase incl. new bearings - Crankshaft (Std-dimension) incl. new bearings - Camshafts incl. new bearings - Wheel drive incl. wheel box cover - Flywheel housing - Oil pump with oil suction pipe -Sump - Valve tappets - Oil pressure valve On request, the scope can be expanded (e.g. pistons, liners, cylinder heads, oil coolers, etc.) Further information on the scope and design can be found on our homepage: buecker-essing Removal and installation as well as service for the engine and CHP unit are optionally possible. Please contact us for a written offer. We also have other remanufactured engines, as well as AT cylinder heads, turbochargers, spare parts and othe ...

- Compensator compensator MWM 12304761 - Please note! Price per piece! - 12304761 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new technologies and proc ...

- Compensator Compensator MWM 12300811 Original - Suitable for several motors - Please note! Price per piece! - 12300811 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting a ...

- Oil cool oil cooler 12302852 MWM - Suitable for several motors - Please note! Price per piece! The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new techno ...

Sell completely dismantled as part of DEUTZ TCD2015 V8 MIW GmbH Motoren-Instandsetzungs-Werk Nord-West-Ring 8 D-27404 Zeven-Germany Tel: 0049 (0) 4281-950583 Fax: 0049 (0) 4281-950585 Email: info@miw-zeven

TIPPER TIE TECHNOPACK TCNV-200 BT pneumatically operated single-clipper

RECON Part number: 1227 6584 0 401 430 015 PE12A120/520/6RS1510 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us For further questions we are gladly available!

Turning Diameter 400 mm Turning Lenght 650 mm With C ,Y axes and subspindle Control Unit Fanuc 31i Can be inspected under power

- Compensator Compensator MWM 12300319 - Suitable for several motors - Please note! Price per piece! - 12300319 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integr ...

FOR SALE... 2 SET T/C TO TCR 18-42065 YOB 2010 AT TURKEY HAVE A GOOD DAY SIR. WE VE 2 SET COMPLETE T/C TO TCR 18 - 42065 AT OUR STOCK. PLS FIND TURBO CHARGER SPECT AT BELOW. TYPE: TCR 18 - 42065 WORK NO: 7642160 / 7642161 SPEED: 37300RPM T MAX: 650C. YOB: 2010 IF YOU INTEREST PLS DO NEED HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba BEST of regards; Aliaga marine services E mail: info@aliagamarine

- Mixture pipe MWM 12301623 - Suitable for several motors - Please note! Price per piece! - 12301623 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new t ...

RECON MWM TCG2020-V16 Part number: 1242 0453 HT837937 / TPS52-F33 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

VERTICAL PRESS RUTIL MODEL: ZEUSS1000TCDDB MATR. C06/100 YEAR: 2000 CLOSING FORCE: 1000 TON VOLTAGE: 380 V FREQUENCY: 50 HZ POWER: 216 KW PRESS. AIR: 6 BAR PRESS H20:4.5 BAR

- Bracket bracket MWM 12300514 - Suitable for several motors - Please note! Price per piece! - 12300514 - References: 12300515 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly ada ...

We offer: New Tetra Pak ® spare parts for TBA 8, PT 8, TBA 21, PT 21, TCBP 70, TCAP 21, 75 ... -> In the list that we send to you on request. you will usually find new spare parts for Tetra Pak ® machines such as TBA 8 PT 8 TBA 21 PT 21 TBA 19 (mainly volume flaps for TPA330SQ) TCBP 70 TCAP 47 (little) TCAP 21 (little) TCAP 75 (little) ... Intermediate sale reserved Prices on request

- Exhaust gas bend exhaust manifold MWM 12304038 o. 12300448 - Suitable for several motors - Please note! Price per piece! - 12304038 o. 12300448 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. ...