broadbent used for sale

A total of 5 sewing machines from various manufacturers are available. 1) Brother LS2-B837. 2) Adler K767 990001. 3) Mauser MA335-G-6/01-BLN. 4) Brother KE-430 FX-05, year of manufacture: 2017, needle: 135x172 Nm110. 5) Dürkopp Adler. On-site inspection is possible.

We sell 600 x HP/Brocade 32Gbit SFPs, used, tested, 6.50 USD each Brocade P/N: 57-1000333-01 21CFR1040.10 32G SW HP P/N: PLC: 871362-001 Pictures on request. These SFPs have an original Brocade label and a HPE spare part number. In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORAC ...

Naehmaschine Brother Exedra E-100 Mark II, Foot Lifter FB II, MD-816B; You buy an industrial naehmaschien from Brother Naehmachine Brother Exedra E-100 Mark II, Foot Lifter FB II, MD-816B, DB2-B737-413 380V

Machine type: Bronx six-roll straightener 6CR 4BW incl. saw and roller tables Working range: Tube: from Ø 15 mm to Ø 54 mm Make Bronx, similar to Kieserling, type: Bronx 6CR 4BW

We sell 2 x Brocade X6-4 SAN Switches Each configured with: 2 x BR-X6-2148. P (Port Blade, FC32-48, 48x32G SWL SFP+, BR) 2 x BR-X6-2164. P (Port Blade, FC32-64, Bundled with Qty-8 4x32G QSFP SWL QSFPs) In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used ha ...

This 4-axis Brother TC-32BN QT was manufactured in 2008, featuring a Brother B00 control system, X-axis travel of 550 mm, Y-axis travel of 400 mm, and Z-axis travel of 415 mm. It boasts rapid traverse rates of 70 m/min, a spindle speed up to 20,000 rpm, and a tool magazine with 40 positions. Consider the opportunity to buy this Brother TC-32BN QT vertical machining centre. Contact us for more information about this machine.

FOR SALE COMPLETE MAIN ENGINE MAN BRONS 12V 25/30 HAVE A GDY SIR; WE VE COMPLETE BRONS MAN 12V 25/30 ENGINE AT OUR STOCK. THIS ENGINE EQUAL AS SULZER 12 ASV 25/30 ENGINE ENGINES ARE IN VERY GOOD RUNNING CONDATION. WE VE SO MANY NEW GENUINE SPARE PARTS AT OUR STOCK. ENGINES ARE READY TO LOAD ON TRUCK. PLS FIND SPEC OF ENGINES AT BELOW 2400Kw 900 RPM 1984 YOB 20604/1045147 SERIAL NO. IF YOU'VE ANY FURTHER QUESTIONS PLS DO NEED HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurlubay Best regards; Aliaga marine services E mail: info@aliagamarine.com PHN/fax: +90 232 618 03 85 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY

Key data: 100 mm, 500 mm, 480 mm

Manufacturer: Brother Type: Speedio W-1000 XD1 Commissioning: 2024 Control type: CNC D00 and plain text dialog programming Axles: 4 X-travel: 100 mm Y-travel: 500 mm Z-travel: 480 mm + stand elevation 150 mm 4.Axis 360° Spindle speed: 16 -16000 rpm Spindle adapter cone: BBT-30 (BT-30) Tool stations: 21 (high-speed tool changer) Optional extras: Internal coolant supply 15 bar with self-cleaning pre-filter system Coolant tank 150 litres "Twin" chip disposal system for coarse and fine chips incl. filter system Automatic side door for robot loading Emulsion mist extraction for working area 700 m³/h CNC rotary table Brother T200 Ad.L clamped with counter bearing 2 x rotary union 4-flow Workpiece clamping hydraulic 80-210 bar Tool breakage monitoring Renishaw Laser Robot interface Part clamping control via differential pressure sensors (2-fold) ...

This Brother TC 32B Vertical Machining Center was built in Japan in 2007. Equipped with a Brother control unit, this machine incorporates 3 + 1 axis and a rotary table. Its BT30 spindle can operate with a speed up to 12000 rpm.

This 5-axis Brother Speedio M 300 X3 vertical machining center was manufactured in 2024. It features a CNC-C00 control unit, with travel dimensions of 300 mm on the X-axis, 440 mm on the Y-axis, and 305 mm on the Z-axis. The machine supports a spindle speed of up to 16,000 min⁻¹ and a rapid traverse rate of 50 m/min. It has a tool storage capacity of 22 tools. Consider the opportunity to buy this Brother Speedio M 300 X3 vertical machining center. Contact us for more information.

This 5-axis Brother HS-70A wire EDM machine was manufactured in 2003. It features a CNC-A50 control, working strokes of 410 x 260 x 170 mm, and can handle workpieces up to 350 kg. The wire diameter ranges from 0.1 to 0.3 mm, supporting precise cutting. If you are looking to get high-quality EDM capabilities, consider the Brother HS-70A machine we have for sale. Contact us for more information about this machine.

Vertical Drilling and Milling Center Brother TC-22A with 4th Axis Year of Make: 1999 Control: Brother Technical data: Spindle speed: max. 12,000 rpm Tool holder: BT 30 Number of magazine slots: 26 Travels: X-axis: 500mm Y-axis: 400m Z-axis: 410mm 4th axis: 0.001° Accessories: Nikken Rotary Table Base plate zero point clamping system We have 2 identical machines in stock.

This 3-axis Brother TC-32B QT vertical machining center was manufactured in 2006. It offers precision and efficiency for various machining tasks. If you are looking to get high-quality milling capabilities, consider the Brother TC-32B QT machine we have for sale. Contact us for more information.

Brother Speedio S700X2Year of manuf. : 2022 Control : Sonstige Brother C00 Speed : 10000 rpmMovement X/Y/Z : 700/400/300 mmTool holder : BBT 30 ____________Description:Mainspindle:Technology:DirectdriveSpeed:10.000 rpmPower (max.):26,2 kWTorque (max.):92 NmTaper:BBT 30Workingtable:Clampingsurface:800 x 400 mmTableloading (max.):250 kgIn general:Toolmagazine:21 StationsRapid travers in X/Y/Z:50/50/56 m/minEquipment/Accessory:Chipmanagement:Chip coveyorCoolingmanagement:Minimumlubrication (IKZ), Company Lubrix V54.-Axis:Lehmann EA-510 with CounterbearingWorkpiececlamping:Hydrulic, 80-210 barContactcontrol:PneumaticAutomationinterface I:Automatic Door (electrical)Automationinterface I:RobotinterfaceOilmistseparation:Mechanical extraction, company Sara UC1 SDColumnextention:150 mmSetup operations:Electronic HandwheelFurther Equipment:Trafo

Intelligent Gas Flow Meter, 5860S/BC1GA0BA1B1, Brooks Instrument, new We have set the lowest price for the new part on the market. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece there is still a great discount. As good as new in original packaging! The part was bought from a spare parts warehouse of a company and has never been in operation, is completely as good as new and in its original packaging. - High-quality mass flow meter for gas - Max. 300 bar Functional guarantee! We cannot provide a conventional warranty and warranty for second-hand parts. Since we know that the device works, we give you a functional guarantee when you purchase it. If the device does not work within 6 months of purchase, you can return the goods and we will refund the purchase price.

Broma Milk Roll Pusher Milchweck / dough piece pusher for manual assignment / one-man operation Pressure setting adjustable long discharge belt Tabletop unit DGUV V3 tested Connection 400V, 16A-CEE plug Used machine overhauled with 6 months warranty

Stock# U2403-1 Used stainless steel homogenizing mixer by Brogtec (CH) model MH-8. Mixer has total volume of mixing chamber 10 l and working volume about 8 l. Tank is rising and lowering manually. Has bottom discharge outlet and possibility to discharge by manual tilt. Working pressure range - mixing chamber from vacuum till 29 PSI (2 bar). Heating jacket up to 43 PSI (3 bar). Working temperature range - mixing chamber from 32 - 250 F (-1 to 120 C). Heating jacket - from 89 - 250 F (31 - 120 C). Mixer is equipped with anchor with wall scrappers type agitator, vertical ribbon agitator and hi-speed homogenizing mill. Anchor and ribbon agitators are driven by gearbox and el motor 0.3/0.44 kW, 1660/3260 rpm, 460 V, 60 hz. Working rotation of vertical ribbon agitator is about 124 rpm, working rotation of anchor agitator - up to 62 rpm. Hi-speed homogenizing mill is belt driven by el motor  ...

TECHNICAL SPECIFICATIONS Manufacturer: BROWN LENOX Designation: KUE KEN Jaw Crusher Type: 106 Design: Double toggle jaw crusher Year of construction: 1982 Inlet opening (width/depth): 1065 x 305 mm Gap width: 38 - 75 mm Throughput: 65 - 110 t/h Maximum feed size: 240 mm Drive power: 55 kW Crushing speed: 300 - 350 rpm Total weight: 10,200 kg SPECIFIC COMMENT - Solid crusher construction with steel support

Coordinate Measuring Machine Brown&Sharpe Model: Microval 454 PFX YOM: 1996 Measuring range X-axis: 457 mm Measuring range Y-axis: 508 mm Measuring range Z-axis: 406 mm Max table loading: 225 kg Machine dimensions (LHW): 895x885x1575 mm

Used steam boiler made by Cleaver Brooks, capacity 2000 kg of steam/1 hour and a pressure 9 bar. New 1997. Gas burner. Working medium steam, permissible temperature 178 degrees Celsius. Heated area 117 m2.

We sell 160 x Broadcom VSE-225-31S 25/40Gbit SFP+ In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at low prices from HASCON! Sales are only made to companies. We have available complete systems and components in refurbished conditions from all the ...

Vertical machining center TC-32BN QT :::TECHNICAL SPECIFICATIONS::: CNC Model: Brother - CNC Version: B00 - Tool Holder: BT 30 - Spindle Power: 11Kw - Number of Spindle Revolutions: 12000 Number of tools: 26 - X-axis travel: 550mm - Y-axis travel: 400mm - Z-axis travel: 415mm - Rapid feeds for linear axes X Y Z: 70m/min Guides: roller CNC divider: yes Divider brand and model: No. 2 NIKKEN Rotation: Continuous Pallet change: yes Pallet size: 600 x 425mm Maximum allowable load: 200Kg Round pallet: yes High refrigerant pressure: yes Chip conveyor: belt Machine equipment: Renishaw probe ready :::D DIMENSIONS AND WEIGHT::: Length: 1890mm Width: 3669mm Height: 2360mm Weight: 4600Kg

Electric motor BROOK CROMPTON Type: D160 LD ( D160LD ) Motor power 15 kW Speed : 1460 rpm Voltage: 220/ 380V Eddy current coupling:: 180 CD4/2 Power: 12.3 kW speed: 1275 rpm 90V, 3.3 Ad.C. Degree of protection: IP23 PYE Dimensions: 1040x450x500 mm

Manufacturer: Brother Model : TC-324N Machine Weight: 2800 kg Voltage Supply: 380 V, 3 Phase, 50/60 Hz Power Consumption: - Spindle Motor: 2.5 kW - Total: 7.0 kVA Short Circuit Current of Main Switch: 10 kA Find more here - / Contact us at -

Key data: 350 mm, 250 mm, 200 mm

• Brother milling machine – TC 31 machining center (2 pieces, fig. 1) Year of Make: 2007 Travel X: 350 mm Travel Y: 250 mm Travel Z: 200 mm Spindle speed: up to 22,000 rpm Spindle cone: BT30 Work table: 500 x 270 mm Wz – Magazine: 26 seats Special feature: Table designed as a rotary changer, loading clamping holder via magazine and ABB robot

Oil-Insulated Power Transformers for Sale Manufacturer: Brown Boveri Model: TRFKa 1350/30 Power Rating: 1350 kVA High Voltage: - 26.25 kV (Middle position) - 27.56 kV (Position 1) - 24.93 kV (Position 5) Low Voltage: 6.3 kV Current Rating: - High Voltage: 29.7 A (Middle position) - Low Voltage: 124 A Frequency: 50 Hz Cooling: ONAN Year of Manufacture: 1972 Status: In operation until March 2025 Notable Condition: High CO levels and water content; oil drying and treatment recommended. Find more here - / Contact us at -

Used homogenizer made by Brogli + CIE Basel Switzerland, type: MH 500 B, capacity: 500 liters with heating jacket, frame mixer, teflon scrapers, dispersing mixer and comb homogenizer.

Control Other Brother C00 Speed [rpm] 10000 Travel X/Y/Z [mm] 700/400/300 Tool pick-up BBT 30 Main spindle: Technology Direct Drive Speed 10,000 rpm Power (max.) 26.2 kW Torque (max.) 92 Nm Tool holder BBT 30 Work table: Clamping area 800 x 400 mm Table load (max.) 250 kg General: Tool Magazine 21 Stations Rapid traverse in X/Y/Z 50/50/56 m/min Equipment/accessories: Chip Management Chip Conveyor Coolant Management Minimum Quantity Lubrication (IKZ), Fabr. Lubrix V5 4th axle Lehmann EA-510 with counter bearing Workpiece Clamping Hydraulic, 80-210 bar Support Control Pneumatic Automation Preparation I Automatic Work Area Door (Electric) Automation Preparation II Robot Interface Oil Mist Extraction Mechanical Separator, Fabr. Sara UC1 SD Stand riser 150 mm Setup operation Electronic handwheel Further equipment transformer

Sewing machine Make Brother Model TZ1-B652 Year unknown Capacity will do leather and fabrics Details has been used for menu cards covers with leather onto board. The unit appears newish Available direct

Foot valve, foot pedal, 5/2 way valve, solenoid valve, hydraulic valve, oil valve, pressure valve, valve block, control block -Manufacturer: David Brown Hydraulics -Type: C9193430351 -Type: SNF05 137 -Quantity: 1x valve available -Weight: 1.1kg

used 2-way baler Manufacturer: MBH BRONNEBERG Type: SUPER II Operating hours: 1,575 h specifications: Press forces: Lid: 900 kN Intermediate compressor: 900 kN End compressor: 120 kN Package dimensions (h x w): 305 x 305 mm Filling opening (l x w): 1,600 x 1,000 mm Drive power of the main pump: (37 kW ? to be tested) Performance data: Sheet metal waste: up to 3 – 5 mm. Cycle time: approx. 45 - 60 sec. Number of parcels: up to 40 - 50 / hour Dimensions: Length: 4,200 mm Width: 1,900 mm / 3600 mm Height: 2,400 mm Weight approx. : 10 tons Subject to errors in the technical data

Brother Hi-Spin riveting machine 5mm high spin Type: BR1-103 - Crimping ability (Mild steel rivet) φ5mm or less - Spinning head: 20-40mm - Distance between tabletop and punch: 60-180mm - Table working surface size: 310 x 180mm - Processing time setting range: 0.3-5 seconds - Normal pressure: (Varies depending on pressing conditions) 2-5kg/cm2 Air consumption: Power supply and motor Three-phase 200V 0.2kw 4Pole Machine size Width 390 x depth 510 x height 1000mm Machine weight 95kg

Inv. Num. : 8729 Type: TC 215 Producer: Brother Generated: Parameters: Work table length: 500 mm Work table width: 220 mm Maximum table load (even): 75 kg Maximum vertical spindle speed: 10000 1/min X-axis travel: 300 mm Y-axis travel: 220 mm Travel Z-axis: 200 mm Number of all tools: 10 pieces Machine height: 1901 mm Machine length: 2430 mm Machine width: 1200 mm Machine weight: 1300 kg Equipment: Tool Holder

Brown & Sharp Tesa Hite 350 Digital Height Gauge 007.30041

Brown & Sharp 600 x 400 mm

Brown & Sharp 500 x 500 mm

Brown & Sharp 1000 x 2000 mm

General SKU228M139 LocationBarneveld MakeBrogli & Cie AG TypeMH-1000 C No.1723 Year of construction1976 Pressure Working pressure0 Bar Main Features MaterialStainless steel Volume1000 Ltr. Motor32 KW Specified Features - Processing vessel MaterialStainless steel 1.4408 Closed stirring vesselcheck Capacity1000 l With covercheck With propellor stirrer(spiral Helix stirrer) With anchor stirrerscraper stirrer Motor8 kW (400 V, 1450 rpm) Speed mixing shaft300 rpm With homogenisercheck Motor16/24 KW (400 V, 3000 rpm) Information With switchcheck With switchgearcheck Floorspace3,0 x 1,8 m Total height3,1 m Extra Specifications- Vessel is missing - based on manometer on lid, the vessel should be designed for vacuum Processing vesselsBrogliProcessing vessels > Processing vesselsBrand > Brogli What you can expect from Foeth: -- Machine is in working condition -- At a  ...

A machining center with 10-station tool changer is offered. Table clamping surface X/Y: 600mm/300mm, travel X/Y/Z: approx. 420mm/300mm/250mm, spindle speed: 6000rpm. Tool holder: BT30. Control: Brother CNC-400, machine weight: approx. 2000kg, including manual. Inspection possible by appointment.

This Brother TC 31AN was manufactured in 2007. It features a robust Fanuc machining center control, a high-speed spindle up to 22,000 rpm, and a BT30 spindle taper. The work table measures 500 x 270 mm, complemented by a 26-slot tool magazine. Specialized with a rotary changer table for efficient fixture loading. Contact us for further details regarding this machine.

This 4-axis Brother Speedio S700X1 was manufactured in 2014. It features a robust table size of 700 x 400 mm and a maximum table load of 250 kg. Equipped with a high-speed spindle up to 10,000 rpm and a 15 kW motor, it supports a tool magazine with 24 tools. Ideal for precise and efficient machining. Contact us for more information about this machine.

I'm selling parts for a Brother TC-31A pallet milling machine (year 2000). All components are available, including: - indexers (4th axis), - screws and mechanical components, - electronics modules, - motherboards, - tool magazine, - motors, - servos, - and many other components. For pricing on individual parts, please contact me.

Three Broich conveyor belts are available, length conveyor belt 1/2/3: 4400/4070/5500mm, width conveyor belt 1/2/3: 1400/1900/1400mm. An on-site inspection is possible.

General SKU255T404 LocationBarneveld Main Features MaterialStainless steel Motor7.5 KW Inlet diameter140 mm Specified Features - Colloid mill Colloid millcheck Rotor sizesdia. 75x140mm Teethed rotorcheck With hoppercheck Inletdia. 80 mm Outletdia. 36 mm Motor7,5 kW 380 Volt Speed2850 rpm MaterialStainless steel 1.4435 (316L) Information MakeColloVelox No.2114 Mounted on wheelscheck With switchcheck Floorspace0,7x0,8 m Total height1,2 m Weight250 kgColloid millsBrogliMills > Colloid millsBrand > Brogli What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU213M066 LocationBarneveld MakeBrogli + Cie Basel TypeMulti Homo MH-20 C No.1054 Pressure Working pressure0 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume20 Ltr. Specified Features - Processing vessel Closed stirring vesselVacuum processing vessel (1x) Capacity20 Ltr (useful) Vessel sizesdia. 340x250mm, Vessel mounted on wheels With covercheck Outletdia. 20mm With jacket(with electric heating, 4000 Watt) With anchor stirrerscraper stirrer With homogenisercheck MaterialStainless steel 1.4404 (316L) Information Year of construction1969 With switchcheck Floorspace1,4x0,7 M Total height1,4 M Weight380 KG Technical specs Extra informationVessel mounted on wheels Processing vesselsBrogliProcessing vessels > Processing vesselsBrand > Brogli What you can expect from Foeth: -- Machine is in working condition -- At a reduced price comp ...

General SKU302P607 MakeBrogtec Mischtechnik GmbH (DE) LocationBarneveld CEcheck TypeMH-20 Pressure Working pressure2 Bar Vacuum possiblecheck Working pressure jacket5 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume20 Ltr. Motor3 KW Specified Features - Processing vessel Closed stirring vesselcheck Capacity20 Ltr Vessel sizesdia. 340 x 280 mm Dished bottomcheck Flat top sidecheck With covercheck Outletdia. 65 mm With jacketcheck Max. temperature150 Degr. C With anchor stirrercheck Motor3 kW 400 Volt Speed mixing shaft15 rpm MaterialStainless steel 1.4404 (316L) Information No.BR-121104 Year of construction2005 Mounted on legscheck With switchgearcheck Floorspace1,4x0,8 M Total height1,9 M Weight550 KGProcessing vesselsBrogtecProcessing vessels > Processing vesselsBrand > Brogtec What you can expect from Foeth: -- Machine is ...

Technical data: Manufacturer: Tesa Brown&Sharpe Type: Derby Etalon 454 Year of Make: 1998 Measuring range X/Y/Z: X 457 mm, Y 508 mm, Z 406 mm Transducer: Renishaw TP-ES Dimensions and weight Weight: approx. 250 kg Condition Condition: Used Functional: Tested and fully functional

Vibration damper, compensator, damper, expansion compensator, expansion piece, axial compensators, stainless steel compensator, steel expansion compensator, steel expansion joint -Manufacturer: SB Broneske, compensator unused -Type: SBF25.050 -Nominal diameter: Ø 270 mm / length 235 -Material: Bellows stainless steel -Bolt circle: Ø 335 / 18 mm -Number: 5x dampers available -Price: per piece -Dimensions: Ø 375 x 230 mm -Weight: 15.3 kg/piece

Vibration damper, compensator, damper, expansion compensator, expansion piece, axial compensators, stainless steel compensator, steel expansion compensator, steel expansion joint -Manufacturer: SB Broneske, compensator unused -Type: SBF25.100 -Nominal diameter: Ø 270 mm -Material: Bellows stainless steel -Bolt circle: Ø 335 / 18 mm -Dimensions: Ø 375 x 260 mm -Weight: 15 kg

Pneumatic chain hoist, crane, indoor crane, assembly crane, air-operated chain hoist, compressed air chain hoist, compressed air chain hoist, pneumatic chain hoist -Manufacturer: BroomWade, pneumatic chain hoist type MLHI10A -Load capacity: 500 kg -Chain length: 3100 mm -Dimensions: see photos -Transport dimensions: 260/230/H300 mm -Weight: 18 kg