box used for sale

Technical data for the pallet rack traverse: Shelving system: Dexion Type: Speedlock Super 4 The scope of delivery includes: 01x pallet rack traverse, used Material color: sendzimir galvanized Truss type: SLO 89|2 Box profile: 89 x 50 mm Agraffe: 4 HK (hook) clear width: 3,095 mm

406mm x 14mm API Pipe Mill Year New: 2006 Material Grade: X70 / X52 Pipe Diameter: 4.5" - 16" Wall Thickness: 4mm - 14mm Pipe Length: 6m - 14m Coil Width: 1350mm Coil OD: 2200mm Coil Weight: 25 ton Four (4) Entry Storage Area Floor Standing V-Type Coil Car Mandrel Uncoiler (5.5Kw Drive) Automatic Shear & End Welder Coil Straightener Horizontal Accumulator Forming Mill Six (6) Forming Stands Three (3) Side Clusters Four (4) Finn Passes 280Kw & 355Kw Forming Drives Welding Section Mechanical 4 - Roll Squeeze Box 800Kw EFD High Frequency Welder Two (2) Mid Frequency Annealing Heads Sizing Mill Four (4) Sizing Stands Two (2) Straightening Turk Heads 200Kw & 400Kw Sizing Drives Milling Flying Cut Off Rotary Double Saw Blades Diameter: 355mm Speed Accelerating System Digital Length Control Hydraulic Cut-Off Drive Mechanical Traverse Powered Run-Out  ...

Technical data for the pallet rack traverse: Shelving system: Dexion Type: P90 The scope of delivery includes: 01x pallet rack traverse, used Material color: orange Truss type: SLO 89/2 S275 JR Box profile: 90 x 50 mm Agraffe: 5 HK (hook) clear width: 1,900 mm load per pair of trusses 1,800 kg, at the same time. distributed load 02x locking pins, used Execution: compl. galvanized For securing the longitudinal members against unintentional lifting

Technical data for the pallet rack traverse: Shelving system: Dexion Type: P90 The scope of delivery includes: 01x pallet rack traverse, used Material color: yellow Truss type: SLB 110/1.5 S320 Box profile: 110 x 50 mm Agraffe: 5 HK (hook) clear width: 1,900 mm load per pair of trusses 2,000 kg, at the same time. distributed load 02x locking pins, used Execution: compl. galvanized For securing the longitudinal members against unintentional lifting

2,700 mm clear width / K: 95 x 45 mm Technical data for the pallet rack traverse: Shelving system: Jung Heinrich Type: Delta The scope of delivery includes: 01x pallet rack traverse, used Material color: yellow Box profile: 95 x 45 mm Agraffe: 3 HK (hook) clear width: 2,700 mm

Bitzer unit Two-stage with 2 compressors Bitzer Type S6F-30.2Y, including condenser, collector switch box

Technical data for the pallet rack traverse: Shelving system: Jung Heinrich Type: Delta The scope of delivery includes: 01x pallet rack traverse, used Material color: yellow Box profile: 85 x 45 mm Agraffe: 3 HK (hook) clear width: 2,800 mm

Machine type MIG/MAG welding system Brand Rehm Type Magnum 182 Supply voltage 230/400 volts Setting range 30 – 180 amperes Duty cycle 25 % ED at 180 amps 60% ED at 140 amps 100% ED at 100 amps Current setting 6 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder 2-roller drive Fuse 16 Ampere Special device 2-stroke/4-stroke Points/Interval Dimensions L x W x H 760 x 320 x 580 mm Weight 53 kg Age approx. 20 years Condition workshop tested, very good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 1 piece pressure reducer argon with 2 pressure gauges 1 roll of welding wire D-300 coil, 5 kg, 8.0 mm Ø 1 can non-stick spray 1 piece hand shield 1 piece protect ...

never used System • Dimension mm 1700 x 1050 x h 1350 • Vertical Box Motion system • Power 400 Volt 50 / 60 Hz • Air supply 6 Bar Technical • Max Film mm up to 720 • Max Speed 25 ppm • Max Jaws mm up to 310 • Max Length Pack mm up to 400

Bitzer unit Two-stage for freezer and blast freezer, with 2 compressors Bitzer type S6G-25.2Y, including condenser, collector Control box Converted to the compressor. Price on request Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at

bore capacity in steel (diameter): 25 mm throat: 175 mm bore stroke: 50 mm : 16 mm spindle taper: ISO 30 spindle turning speed range: 50 - 3000 U/min : 380 mm : 175 mm table surface area: 700 x 180 mm connected load frequency: 230 V max. distance between table and spindle-nose: max. 320 mm total power requirement: 0,75 kW weight of the machine ca.: 150 Kg dimensions of the machine ca.: 670 x 550 x 910 m Drilling and milling machine with large table Digital display SINO 3-axis. Digital display quill stroke. 2 speed levels. Left/Right switch Pan head left/right 90° spindle protection. incl. tool box with various tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Vertical baler HSM 155.2 VL, built in 2003 Specifications: Manufacturer: HSM Type: 155.2 VL Year of construction: 2003 Press force: 16 t Drive power: 4 kW Filling opening: 1100 x 590 mm Filling height: 730 mm Press box dimensions: 1100 x 700 x 1130 mm (WxDxH) Bale size: approx. 1100 x 700 x 700-1000 mm Capacity per hour: approx. 4-8 bales Theor. Idle cycle time: 24 s Dimensions: 1400 x 1200 x 2300 mm (WxDxH) Weight: 1300 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale takes place from the location, without guarantee and guarantee. Our payment term is 100% prepayment.

Technical data for the pallet rack traverse: Shelving system: SLP The scope of delivery includes: 01x pallet rack traverse, used Material color: orange Truss Type: RTS125 Box profile: 125 x 50 mm Agraffe: 3 HK (hook) clear width: 3,600 mm load per pair of trusses 2,400 kg, at the same time. distributed load 02x locking pins, used Execution: compl. galvanized For securing the longitudinal members against unintentional lifting

bore capacity in steel (diameter): 45 mm quill stroke: 125 mm : 560 mm : 230 mm table surface area: 800 x 240 mm spindle turning speed range: 75 - 3200 U/min max. milling cutter diameter: 80 mm spindle taper: ISO 30 max. distance between table and spindle-nose: 460 mm throat: 230 mm connected load frequency: 230 V total power requirement: 1,5 kW weight of the machine ca.: 580 Kg dimensions of the machine ca.: 1,2 x 1,0 x 2,1 m Equipment: All axes with 3-digital display. Quill travel has separate digit display. Automatic feed in X-axis and quill. Motorized Z-axis. tapping device. coolant system. machine base. Collet set, SK tool holder. Further machine accessories in box. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 30 mm throat: 200 mm bore stroke: 70 mm : 16 mm spindle taper: MK3 spindle turning speed range: 50 - 3000 U/min : 565 mm : 220 mm table surface area: 840 x 210 mm connected load frequency: 400 V max. distance between table and spindle-nose: max. 470 mm total power requirement: 1,1 kW weight of the machine ca.: 230 Kg dimensions of the machine ca.: 0,75 x 1,05 x 1,3 m Drilling and milling machine with large table Digital display SINO 3-axis. Digital display quill stroke. 2 speed levels. Left/Right switch Pan head left/right 90° Recording MC 3 - B16. Drill chuck 3 - 16 mm. spindle protection. Machine stand. incl. tool box with various tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hives inserter BORTOLIN mod. MA 88/2 Year: 2006 Speed: 1.800 CPH da 6, 1.200 CPH da 12 Double head Safety protections. Complete with vibrating belt to facilitate the descent of the hive into the box

3 x Diverter ZWR-150-AS/AS-H0/R2-D-S Distribution or collection element in pneumatic conveyor systems for powdered and granular Products from a wide range of industrial sectors. Factory No. / Item no. /Drive end: 92576 / -- / R 92577 / -- / R 92578 / -- / R GENERAL DATA Product: Li2Co3; LiOH Powder Bulk density: 380.0 kg/m3 Bulk density: 900.0 kg/m3 Grain size distribution: 0.050 mm Grain size distribution: 0.400 mm Product temp. min.: 10.0 °C Product temp. max.: 35.0 °C Ambient temp. min.: 10.0 °C Ambient temp. max.: 35.0 °C Discharge pressure: 0.00 bar (g) Explosion protection: According to customer specifications, no explosion protection provided Design data Max. operating pressure: 6.00 bar (g) Compressed air supply: 4.50 bar MATERIALS / DESIGN Execution: Distribution Housing: Cast aluminium EN AC-42100 (A375.0) with replaceable stainless steel in ...

We offer a position Doka Framax Alu 186,759m² in good ready-to-use condition with up to 75% discount! Partially new formwork - new value = 176.805,40€ Special net price 53.512,74€ Formwork completely cleaned, inspected and sorted. Formlining exposed concrete class 2/3 or newly covered with Finply formwork. Out-of-the-box, suitable for higher-value use. Pcs. Designation 28 Alu-Framax Xlife-Element HK 0.90x 2.70m 3 Alu-Framax Xlife-Element HK 0.90x 2.70m – newly occupied 3 aluminium Framax Xlife element HK 0.75x 2.70m 1 aluminium Framax Xlife element HK 0.75x 2.70m – newly occupied 15 Alu-Framax Xlife-Element HK 0.60x 2.70m 5 Alu-Framax Xlife-Element HK 0.60x 2.70m – newly occupied 10 aluminium Framax Xlife element 0.45x 0.90m 3 Alu-Framax Xlife element 0.45x 0.90m – newly occupied 3 aluminium Framax Xlife element 0.30x 2.70m 7 Alu-Framax Xlife el ...

Ref.Nr. 0808 Name of the system Exhaust air scrubber C180 Manufacturer: Kyocera Model C180 Year of construction 2022 ACCORDING to order confirmation from the manufacturer Description Exhaust air scrubbers for installation next to the exhaust or free installation for washing (absorption) of aggressive and toxic gases from the exhaust air directly at the point of origin. For cleaning, the exhaust air is passed through a spray mist, which is generated by a specially designed conveyor and spray wheel. The purified exhaust air is passed through agglomerators and mist eliminators to prevent moisture from entering the exhaust air system. Execution 1 housing made entirely of polyprophlen (PP), (see below for the overall dimensions of the device) 1 block flange DN 250 with 4 connections on the right, left and top sides 2 sealing covers to close the connections that are not ne ...

Machine Type: TIG Inverter Welding Machine Water-cooled DC and AC system Make Lorch Type V 30 AC/DC Connection voltage 3 x 400 Volt Adjustment range 3 – 300 amps Duty cycle 60% ED at 300 amps 100% ED at 250 amps Infinitely variable current adjustment max. weldable material thickness steel / stainless steel = 8 mm Aluminium = 5 mm Cooling inverter by built-in fan Cooling burner water-cooled Design of mobile industrial plant Fuse protection 32 amps Dimensions L x W x H 1,130 x 450 x 815 mm Weight 108 kg Age approx. 10 years Condition workshop-tested, very good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece TIG torch Binzel WHW 18 SC, 4 mtr. long 1 piece of ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box cpl. Equipped 1 ...

Machine Type: TIG Inverter Welding Machine gas-cooled DC and AC system Brand: Merkle Type LogiTIG 240 AC/DC Connection voltage 1 x 230 Volt Setting range 3 – 240 amps Duty cycle 35% ED at 240 amps 60% ED at 160 amps 100% ED at 130 amps Infinitely variable current adjustment max. weldable material thickness steel / stainless steel = 6 mm Aluminium = 4 mm Cooling inverter by built-in fan Cooling burner gas-cooled Portable compact system design Fuse protection 32 amps Dimensions L x W x H 535 x 230 x 465 mm Weight 25 kg Age 36 months Condition workshop-tested like new incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece TIG burner 4 mtr. long 1 piece of ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box cpl. Equipped 24 Months ...

This BYSTRONIC Xpert 200 x 3100 Bending machines machine was manufactured in 2011 in Germany. The machine has a bending length of 3100 mm and includes a box of bending tools.

Jenacher diesel emergency generator with a MAN 2842 LE diesel engine and a Hitzinger Synchronous generator . Complete with switch box and heat extraction from Jenbacher with 235 kW from the exhaust heat

Used vacuum homogenising mixer type HYJRZ-50. Technical data: - Machine made of stainless steel, - Tank capacity: 65 L, - Working volume: 50 L (minimum 30 L), - Mixer: 1.5 kW 60 rpm, with inverter for speed control, - Homogeniser: constant speed 2.2 kW 2900 rpm, with inverter to regulate speed. - Power supply: 3 phases 380v/50hz, - Vacuum pump helps to pressurise the tank, - Lower 2 electric heaters are made of high quality stainless steel, tap water valve for heating the jacket, temperature control on the control panel, - Maximum heating temperature by water heating 100 °C , - Maximum heating temperature by oil heating 150 °C, - Minimum heating temperature is room temperature; - Heating power 6kw, - Cooling method: by cold water or chilled water through the central jacket. - The temperature sensor for temperature measurement is located in the control box. - Wei ...

We offer Doka Multi-Purpose Bar Top 50 with 80% discount New value = €14,035.50 Package price: 2800,00€ net. Out-of-the-box Pcs. Designation 7 multi-purpose bars WS10 Top50 0,50m 18 Multi-purpose bars WU12 Top50 2,50m 1 multi-purpose bar WS12 Top50 2,75m 1 multi-purpose bar WU12 Top50 3,00m 8 multi-purpose bars WU12 Top50 3,50m If you have any questions, please contact Mr. Becker on 0049 176 70044689 Offer only valid while stocks last! Subject to prior sale! Loading: free of charge from our warehouse Transportation: Can be arranged on request. The transport price depends on the required loading meters, weight and distance and is calculated individually. Payment: cash payment on pick-up, transfer before pick-up. All prices excl. VAT + transport. Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration a ...

Machine Type: TIG Welding Machine gas-cooled DC system Brand: Merkle Type TIG 160 DC Connection voltage 1 x 230 Volt Adjustment range 4 – 160 amps Duty cycle 35% ED at 160 amps 60% ED at 140 amps 100% ED at 120 amps Infinitely variable current adjustment max. weldable material thickness 4 mm Cooling system by built-in fan Cooling burner gas-cooled Design of portable assembly system Fuse protection 16 amps Dimensions L x W x H 560 x 230 x 480 mm Weight 17 kg Age approx. 25 years Optional accessories Connection for handheld and foot remote controllers Condition workshop-tested, good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece TIG torch ABL 17, 4 mtr. long 1 piece of ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box  ...

Machine Type: TIG Welding Machine gas-cooled DC and AC system Brand: Merkle Type TIG 200 AC DC Serial No. 23.573 Connection voltage 1 x 400 Volt Adjustment range 5 – 200 amps Duty cycle 20% ED at 200 amps 60% ED at 120 amps Infinitely variable current adjustment max. weldable material thickness steel / stainless steel = 5 mm Aluminium = 3 mm Cooling system by built-in fan Cooling burner gas-cooled Portable compact system design Fuse protection 25 amps Dimensions L x W x H 610 x 220 x 460 mm Weight 42 kg Age approx. 25 years Optional accessories Connection for handheld and foot remote controllers Condition workshop-tested, very good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece TIG burner 4 mtr. long 1 piece of ground cable 1 piece pressure reducer with 2 pressure gauges  ...

Log cross-cut saw Stable industrial cross-cut saw for blocks, e.g. for Production of pallets/firewood, etc. Used machine, Germany, North Rhine-Westphalia Electric cross-cut saw for the production of Pallet blocks incl. conveyor belt, Roller table and sliding table for squared timber Automatic inclined conveyor belt for filling a Mesh box or collection container The system works perfectly and is in good technical condition. Storage location, postal code 57319. Transport is carried out by buyer. Sale only without guarantee and warranty Subject to changes and errors in the technical data, specifications and prices as well as prior sale!

Description Parcel logistics Mailroom handling Vacuum – Tube lifter Schmalz Jumbo 50 with swivel arm for wall mounting Payload 80 kg, boom approx. 3.5 m Sound insulation box for vacuum pump with wall mounting frame 2 different suction plates

Passage width 2500 mm Stroke 900 mm Total power requirement 62 kW Machine weight ca. 27,5 t Dimensions L x W x H approx. 3950 x 2200 x 4850 mm Retraction force 40 t Master cylinder 2 pieces Column diameter 220 mm Installation height 1300 mm Table size 2500 x 1600 mm Ram size 3100 x 16000 mm Table height above floor approx. 900 mm Flow speed 200 mm/sec Return speed 200 mm/sec Working speed 5 - 15 mm/sec Oil tank 1500 l Oil quantity 1200 l Pressure control adjustable from up to 50 - 400 t Thermoforming cushion 1400 x 800 mm Deep-drawing unit capacity 30 - 60 t Deep-drawing cushion stroke 250 mm Deep-drawing cushion speed 5 - 80 mm/sec robust machine body with solid welded construction low-maintenance and reliable Piston rod with induction hardening and chrome cladding T-slots according to customer requirements, if not specified 22mm according to DIN CE Certific ...

Bitzer shock freezer, freezer unit with evaporator and switch box

Manufacturer / Model JOHNFORD Model SV-41 + DIVISOR 4º/5º EJE Year 2007 CNC HEIDENHAIN iTNC 530 Table dimension 1.200 x 600 mm Max weight allowed on table 1.200 kg Travels (X/Y/Z) 1.050 / 610 / 610 mm Distance spindle nose to table 100-710 mm. Distance spindle center to column 640 mm. Rapid Feed(X/Y) 30.000 mm./min. Rapid Feed(X/Y/Z) 20.000 mm./min. Cutting feed 12.000 mm/min. Taper BT-40 Spindle speed 60-10.000 rpm Spindle power 7,5 / 11 kW Automatic tool changer (ATC) INCLUDED ATC type Bidireccional RANDOM ATC Positions 20 Max tool diameter 100 mm Max tool length 320 mm Max tool weight 10 kg Equipment Internal coolant 20 Bar INCLUDED 2 longitudinal chip conveyor INCLUDED Chip Conveyor INCLUDED Portable Handwheel HEIDENHAIN HR-410 Complete installation 4th axis INCLUDED Rotary table Golden Sun CNCT 321 (4th/5th axis) INCLUDED Rotary table diameter 200 mm.  ...

Manufacturer / Model JOHNFORD Model SV-41 + APC Year 2007 CNC FANUC 18i MC.2 Table dimension 1.200 x 600 mm Max weight allowed on table 1.200 kg Travels (X/Y/Z) 1.050 / 610 / 610 mm Distance spindle nose to table 100-700 mm. Distance spindle center to column 640 mm. Rapid Feed(X/Y) 30.000 mm./min. Rapid Feed(X/Y/Z) 20.000 mm./min. Cutting feed 12.000 mm/min. Taper BT-40 Spindle speed 60-10.000 rpm Spindle power 7,5 / 11 kW Automatic tool changer (ATC) INCLUDED ATC type Bidireccional RANDOM ATC Positions 20 Max tool diameter 100 mm Max tool length 320 mm Max tool weight 10 kg Equipment Internal coolant 20 Bar INCLUDED 2 longitudinal chip conveyor INCLUDED 2 cross chip conveyor INCLUDED Air conditioning in electrical cabinet INCLUDED Portable Handwheel INCLUDED Automatic pallet changer INCLUDED ZF box INCLUDED

Machine is in TOP condition ! X/Y/Z: 400/220/400 mm Speed: 40 - 2500 rpm Feed: 0 - 500 mm/min Rapid traverse: 1200 mm/min Quill stroke: 80 mm Table: 700 x 320 mm Tool holder: ISO 40 Drive motor: 2.2 kW Machine dimensions (WxDxH) 120 x 150 x 175 cm Dimensions electrical box (WxDxH) 64 x 32 x 90 cm Machine weight 1200 kg Weight control cabinet 80 kg

Used UHT Line made in 1999. Steriliser, Homogeniser, milk bag filler 2500 L/h Used sterilization and aseptic packaging line Year of production 1999 1. Elecster Twin 2500 L/h sterilizer (with homogenizer) Note: Damaged sterilizer controller Manufacturer: Toomo Halogen Oy SF-3781 Toijala, Finland Technical data: 120kVA power supply power consumption for heating 54 kJ/kg total power consumption 81 kJ/kg compressed air min 6 bar water – pressure 2 – 4 bar water temperature 5 - 10°C cooling water consumption depending on capacity: homogenizer cooling approx. 100 L/h, cable connection cooling approx. 100 L/h capacity: 1000-2500l/h sterilization temperature 140°C homogenization temperature 65°C homogenization pressure: 120-150bar dimensions: - occupied area 2300x2000 mm (device 700x1200 mm; homogenizer 800x2600 mm) - height 2700 mm - weight: sterilizer 3000 kg, ho ...

Machine Details Stock number 1105-03752 Machine type machining center - vertical Make DOOSAN DAEWOO Type MYNX 550 Year of construction 2002 Control type CNC Storage location HAGUENAU Country of origin KORREA Delivery time IMMEDIATELY Freight base ex works Technical details longitudinal 1270 mm transverse 510 mm vertical 625 mm Tool changer 30 pos. tool length 250 mm tool diameter 80 mm tool through. with free neighbor box. 130 mm Rapid traverse 30 m/min Machine weight ca. 8 t Drive power 100% ED 15 kW Drive power 40 % ED 13 kW Speed range 8000 1/min Tool holder SK 40 Table surface 1200 x 500 mm Permissible load (central table) 800 kg Information FANUC 21 M B El. Handwheel Conveyor 8000 RPM 30 TIMES ATC BT 40 CHIP CONVOYER

Including Small Plastic Swivel Castors x 4 Excluding Box

Max. load 3000 kg; working width 1000x1000 mm; electrical/hydraulic; v.v. hydraulic unit; power 15 kW; incl. control box on column

Excluding box Various sizes

Excluding Box

including accessories; unused in box

Bottling line isobaric PET/glass Year: 2000 - 2013 Speed: PET: 6.000 bph Vetro: 8.000 bph Blower SIAPI - 2000 Preform tilter – 2012 ZECCHETTI air conveyors – 2000 Depalletizer SYMPAK - 2003 Filling monoblock BC 42.50.10 – 2000 Ozonator – 2000 Caps elevator – 2000 Deareator and Saturator BC– 2000 Labeller KOSME cold glue and hot melt for glass – 2000 Labeller P.E. hot melt for PET - 2003 Bottle inspector (cap level label) – 2000 Inkjet VIDEOJET – 2013 Devider (1 to 2 rows) – 2003 Shrink wrapper DIMAC – 2000 Handler TWINPACK – 2000 Wraparound DIMAC – 2003 Box conveyors - 2003 Palletizer KEBER – 2000 Pallet wrapper – 2000

Maximum cutting thickness 20mm, unloading 500mm, with corner 105x105mm, equipped with lifting roller bench 3700x520mm, PEHU 210 control box and work table with various accessories.

Excluding Box

Swivel Wheels x 3 Single Wheels x 5 Excluding Box

including accessories; unused in box

Ventilation system Howatherm , 16.000 m3/h, with speed control via Feqwenzumrichter Danfoss, filter, heat exchanger cold/warm, Silencer, control box, etc. Used for laboratory purposes only. Very good condition, as good as new. Price on request.

-Release agent spraying system for bread baking tins -Grease baking tins -Grease box moulds

Unused pneumatic machine clamp, is still in the box. -Jaw width: 200 mm. -Jaw height: 63 mm. -Jaw opening: 300 mm. -T length: 710 mm. -T height: 173 mm. -Incl clamping cleats. -Total weight: 86 kg.

Unused in box