box used for sale

HBM Hottinger Baldwin Metrology; VKK2; 1996; 4 sensors each up to 2000kg; Stainless steel housing; with central detection unit terminal box; with 4 inputs and 2 outputs; designed for sourdough boiler 5000kg (Electronic scale; weighing system; without evaluation unit!)

Aggregate type: stationary Design: Soundproofed Technical data engine: Engine manufacturer: Yanmar Engine type: 4 TNV 98 T Engine No.: 180067 Motor power: 37.7 KW Cooling: Water-cooled Start: Electric 12 V DC Speed: 1500 rpm Fuel: Heating oil EN 590 Technical data generator: Generator manufacturer: Mecc Alte Generator Type: ECP32.2S4C Gene. Item #: P217148 Generator power: 45 kVA Voltage: 400 / 231 Volt Power factor: cos. - phi 0.8 Speed: 1500 rpm Switchgear: Version: Automatic start Functions: Emergency power operation Switch: Generator switch 4 pole Delivery: Assembled Width approx. mm: Height approx. mm: Depth approx. mm: Tank: Design: Base frame tank with drip tray Width approx. mm: Height approx. mm: Depth approx. mm: Content / Litre: 100 Dimensions of th ...

Machine type TIG inverter welding system gas-cooled DC system Merkle brand Type LiteTIG 210 DC Connection voltage 1 x 230 Volt Setting range 5 – 210 amps Duty cycle 20 % ED at 210 Ampere 60% ED at 145 amps 100% ED at 135 amps Current adjustment infinitely variable weldable material thickness 6 mm Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Fuse 16 amps Dimensions L x W x H 410 x 150 x 240 mm Weight 8 kg Age 6 months Condition workshop tested, as new, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece TIG burner 4 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box kpl. Equipped 24 months warranty 1 piece instruction manual Listen-Werk-Price ex stock with 2 ...

Coming for sale: several used clamping angles/boring mill angles 1500 to 1800mm wide 2500mm high 1250mm deep Mass: 5.8t Load capacity 60t 6 pieces available tlw with staircase In addition, there are several smaller angles for sale: Clamping angle 1020 x 1025mm No. 81 Clamping angle 805 x 1000mm No. 85 Clamping angle 1660 x 1620mm No. 82 various box angles

Killian NRD 39 Tablet press 39 punching stations, 96,000 - 260,000 tablets/h, currently set for 17mm diameter tablets, with box of other toolings and manual

used shared shop oven Wachtel Piccolo I-5 DMS 3 Master Timer from year of construction 2011 is immediately available for sale in the warehouse in Bielefeld. The furnace is tested for function and cleaned. -5 floors each 60x80cm -each floor with separate control -each floor with upper and lower heat separately adjustable -each floor has its own steam box for steam -each floor with security viewing glass door -with exhaust air hood -with proofing cabinet -Year of construction 08/2011 -electrical power supply 26.9 kW -400V AC/3Ph/N/PE/50Hz Dimensions: Width: 97cm Depth approx. 134cm Height: 237cm

-electric stone slab oven quail -Model Piccolo I-6 -Control DMS 3 m. Clock Timer K -6 floors each 60x80cm -each floor with separate control -each floor with top and bottom heat separately adjustable -each floor has its own steam box -each floor with security viewing glass door -with exhaust air hood -with proofing cabinet -Year of construction: 11 / 2011 -electrical power supply 31.1 kW -400V AC/3Ph/N/PE/50Hz Dimensions: Width: 97cm Depth approx. 134cm Height: 234cm

Machine type TIG inverter welding system gas-cooled DC and AC system Merkle brand Type LiteTIG 210 AC/DC Connection voltage 1 x 230 Volt Setting range 5 – 210 amps Duty cycle 20 % ED at 210 Ampere 60% ED at 140 amps 100% ED at 130 amps Current adjustment infinitely variable weldable material thickness 6 mm Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Fuse 16 amps Dimensions L x W x H 410 x 150 x 240 mm Weight 9 kg Age 6 months Condition workshop tested, as new, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece TIG burner 4 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box kpl. Equipped 24 months warranty 1 piece instruction manual Listen-Werk-Price ex st ...

High: 2.217 mm, Long: 755 mm, Speed: 134/970 rpm, Width: 480 mm, Weight: 440 Kg, Voltage: 220/380 V, Ø column: 150 mm, Base width: 480 mm, Total power: 1.10 HP, Cone spindle: MORSE 3, Length of base: 755 mm, Transmission type: Exchange Box, Spindle motor power: 1 Cv, Ø max. drill steel: 25 mm, Engine cooling power: 0.10 Cv, Spindle displacement: 180 mm, Ø max. steel threaded: M 30, Spindle column neckline: 320 mm, Do not. drill spindle speeds: 8, Angle of inclination of the table: YES, Max. distance spindle axis column: 320 mm, Maximum distance table to spindle: 846 mm, Minimum distance table to spindle: 60 mm, Specification: Column

Output 615 HP Speed 2300 rpm Type of cooling water Number of cylinders 12 With ZF BW160 Type Gear box

Labeller Manufacturer NERI Type BL 400 VTE Series No.M.BAA 137.01 Year of construction 2008 Labeller for boxes max. 400 pieces/min. Box dimensions Length 20- 180 mm x Height 15-120 mm x Width 70-200 mm 2 pages Labelling of Tamper Evident labels horizontal Label roll min. 40 mm max. 400 mm. Incorrect cardboard ejection

Complete sorting plant of Renholmen and RemaSawco The plant can be visited in operation and function until summer 2022. Refurbished in 1996 Power: 400/220 Volt Equipment: 1) Chain conveyor for sideboards and center delivery (buffer zone) 2) Equalization in front of the curve conveyor 3) Accumulation conveyor with curved conveyor 4) Decrypts 2 pcs. To arrange random wood sizes 5) Roller box and buffer table before handling piece by piece 6) Piece-by-piece feeder where the sorter pulls out what needs to be cut off at the top end 7) Sorting station and piecemeal feeding. For manual quality sorting and determination of residual pieces 8) Top-end trim station for manual decision on top trim 9) Conveyor for transport into the sorting hook chains. 10) Hook conveyor chain with steel hook for 40 containers. 11) 40 sliders for pushing down into the right container 12) 40 pieces of  ...

Technical data for the pallet racking system: Shelving system: Mecalux Technical data for installation: Number of shelf rows: 01 pcs. Length per row of shelves: approx. 30,660 mm Number of fields / row of shelves: 11 pcs á 2,700 mm Number of levels plus floor level: 02 pcs. Technical data on the volume: Pallet spaces per field: 09 pcs. Pallet spaces per row of shelves: 09 pcs. Total pallet spaces: 99 pcs. based on: Loading aids: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet ( max. ): 1,000 kg Included in delivery are: 12x pallet rack stand, used Material color: blue Stand Type: M-80-P Stand profilem.: P 80 x 69 x 1.80 mm Incl. transverse and diagonal struts, Base plates The stands are pre-assembled ( screwed truss ) 2,800 mm high 1,100 mm deep 44 ...

Labeller Manufacturer NERI Type BL 400 VTEXL Series No. N 3110018 Year of construction 2011 Labeller for boxes max. 400 pieces/min. Box dimensions length 20- 180 mm x height 15-120 mm x width 70-200 mm 2 pages labelling of Tamper Evident labels horizontal 1 labeller vertical for vignettes Label roll min. 40 mm max. 400 mm. Serialization Make Mettler Toledo YOC 2019 Printer Make Cloud M 610 Incorrect cardboard ejection

Labeller Manufacturer NERI Type BL 400 VTEXL Series No. N 3110017 Year of construction 2011 Labeller for boxes max. 400 pieces/min. Box dimensions length 20- 180 mm x height 15-120 mm x width 70-200 mm 2 pages labelling of Tamper Evident labels horizontal 1 labeller vertical for vignettes Label roll min. 40 mm max. 400 mm. Serialization Make Systech (Product Tracking) Printer Brand Cloud M 600 Incorrect cardboard ejection

Included in delivery are: 01x pallet rack traverse, used Material color: orange Box profile: 130 x 40 mm Agraffe: 4 HK (hooks) Version: Head traverse Clear width: 2,700 mm 02x safety pins, used Version: kompl. galvanized To secure the longitudinal members against unintentional lifting General information about the article: This item is offered for pickup only. Any further desired transport or dispatch of this article is associated with additional costs, which can be requested separately from us depending on the place of delivery or scope of delivery.

Technical data Execution: Vibrating Internal diameter: 1200 mm Height: 350 mm Volume: 300 l Machine´s weight about: 700 kg Overall dimensions machine: Length: 1900 mm Width: 1600 mm Height: 1250 mm Various accessories: Control box Timer

Lister generator set 15 kVA with starter unit - - - - - Engine: - Lister (English manufacturer of industrial engines) - 4 cylinders -Diesel -Water-cooled - 1500 rpm - - - - - Generator: - Manufacturer: Stamford (England) - 15 kVA - 230 / 400 volts - 50 Hertz - AVR - - - - - Control box / starter unit: - Ignition lock for starting - Volt display - Hertz display - Ampere display - Battery voltage indicator - Operating hours counter: 5600 hours - - - - - Condition: -Used - The device was used for emergency protection and for occasional use - A test run with load reduction was made - The engine runs well - The generator generates 400 volts and 50 hertz - - - - - Scope of delivery: - Lister generator set 15 kVA - with starter unit - - - - - Transport: - A Germany-wide transport incl. unloading is possible for an extra charge - To ...

Technical data Diameter of work admitted: 12.5 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.5 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm Various accessories: Combined 3-spindle attachment: 13 Y Electric control-box Controlled clutching device

Technical data Diameter of work admitted: 12.5 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.5 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm Various accessories: Combined 3-spindle attachment: 13Y Electric control-box Controlled clutching device

Technical data Diameter of work admitted: 12.5 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.5 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm Various accessories: Combined 3-spindle attachment: 13 Y Electric control-box Speed accelerator Controlled clutching device

Technical data Diameter of work admitted: 7.00 mm Max. turning length: with flat cames: 60 mm Spindle hole: 8.00 mm Max. treading diameter: 6 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1400 rpm up to: 10000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 2.0 HP Machine´s weight about: 520 kg Overall dimensions machine: Length: 1200 mm Width: 700 mm Height: 1400 mm Various accessories: Combined 3-spindle attachment: 13Y Simple spindle stoping device Electric control-box Controlled clutching device

Technical data Diameter of work admitted: 10.00 mm Max. turning length: with flat cames: 60 mm Spindle hole: 11.00 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1700 rpm up to: 12000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 800 kg Overall dimensions machine: Length: 1440 mm Width: 900 mm Height: 1600 mm Various accessories: Combined 3-spindle attachment: 13 OA Back drilling attachment: 12 AD Electric control-box Swivelling stop Central lubrification

Technical data Diameter of work admitted: 10.00 mm Max. turning length: with flat cames: 60 mm Spindle hole: 11.00 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1700 rpm up to: 12000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 800 kg Overall dimensions machine: Length: 1440 mm Width: 900 mm Height: 1600 mm Various accessories: Back drilling attachment: 12 AD Electric control-box Swivelling stop Central lubrification

Technical data Diameter of work admitted: 10.00 mm Max. turning length: with flat cames: 60 mm Spindle hole: 11.00 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1700 rpm up to: 12000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 800 kg Overall dimensions machine: Length: 1440 mm Width: 900 mm Height: 1600 mm Various accessories: Back drilling attachment: 12 AD Electric control-box Swivelling stop Central lubrification

Technical data Diameter of work admitted: 12.5 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.00 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 6 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm Various accessories: Combined 3-spindle attachment: 13Y Electric control-box Speed accelerator

Technical data Diameter of work admitted: 10.00 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.00 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 6 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm Various accessories: Combined 3-spindle attachment: 13 Y Back drilling attachment: 12 AD Pick-up attachment: 34 DA Electric control-box

Technical data Diameter of work admitted: 10.00 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.00 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 6 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm Various accessories: Drilling attachment 12 U Variocam: VNSA Electric control-box Preparation for loader: Barboy Rocker arm with 1/1000 mm

Technical data Diameter of work admitted: 10.00 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.00 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 6 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm Various accessories: Variocam: VNSA Controlled spindle stop device N Electric control-box Preparation for loader: Barboy Rocker arm with 1/1000 mm

Technical data Diameter of work admitted: 10.00 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.00 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 3.0 HP Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm Various accessories: Combined 3-spindle attachment Electric control-box Speed accelerator

X - axis: 0 mm Y - axis: 0 mm Plasma Tube Cutting Machine is highly accurate and versatile. It can cut multiple profiles: pipe, flat bar and box section. The Multiple Profile Cutting Machine combines the cutting capability of three machines into one machine.   Length:14.000 mm  Width:3.500 mm  Height:2.300 mm  Minimum Tube diameter 60 mm Maximum tube diameter 1016 mm Maximum Workpiece weight 6 Ton Number controlled axis 6 Plasma cutting with power supply Max. wall thickness ca 60 mm  

We have refurbished the Nesbad box machine with logic / display, compressed air groups, protectors as well as a safety circuit.

60” x 22” Two Roll Mill Manuf.: Bridge UK With variable speed control Siemens S7 - 1200 Safety PLC. Danfoss 90kW 315 Amp Frequency Drive with Dynamic Braking Resistor Electromotor 90kW 980rpm Front Roll Speed max. speed (50Hz) 14.1rpm Manually adjustable guide plates Manual nip adjustment Failsafe Pneumatic Caliper brake for Emergency Stopping of Mill Flood cooled rolls with rotary unions fitted 8 outlet mechanical lubrication system to roll bearings David Brown gear box – ratio 980:65.1 High speed pinion / bull wheel drive to rolls Safety PLC control for Start up sequence and machine monitoring HMI fitted to main panel for status monitoring of machine Operation Controls – Rolls Stop / Rolls Start / Inch Reversetart / Inch

Shared oven Quail Piccolo I-2 - Electric shared oven with steam function - 2 floors each 60x80 with visible glass - with digital strain gauge control - each floor with upper and lower heat separately adjustable - each floor with its own steam box for steam - with program memory -can be driven on castors - Floor entrance height: 16.5cm -Height of castors adjustable -Year of construction 12 / 2006 -Electrical power supply: 9.6 kW External dimensions: Width: 97cm Depth: 144cm Height: 169cm (adjustable)

automatic baler Manufacturer: UNOTECH Type: UPAMAT 60 V 5 Year of construction: 2016 Operating hours: approx. 11,500 specifications: Cutting force: 60 t Filling opening 1,400 x 1,020 mm Channel format: 750 x 1,100 mm (H x W) Drive power: 37 kW Rated power 70 kW Rated current consumption: 123 A Pump: Axial piston pump Machine weight: 23.500 kg Output: approx. 260 m²/hour under operating conditions Throughput: at 20 - 30 kg/m³ bulk density approx. 7.8 t/h at 30 - 50 kg/m³ bulk density approx. 12.0 t/h at 60 kg/m³ bulk density approx. 15 t Equipped with: Wirbulator 11 kW Press box planked with HARDOX central lubrication point Large digit display Conveyor belt control Free kick 1,300 litre oil tank including chain conveyor Manufacturer: PAAL Type: KEM 1400 Feed length: 6,810 mm Climbing length: 9,000 m ...

- Sous vide. - With mixing arm and mixing arm. - All stainless steel. - Power: 1.16 kW. - Voltage: 400 V. - Tilting tank. - Tank capacity: 150 L. - With vacuum pump. - Frequency: 50 Hz. - Overall dimensions (L x W x H): ± 1,200 x 1,000 x 1,500 mm. - With control box with working and waiting time.

tags for table feed box

SPECIFICATIONS: Number of filter bags: 150 - Ø mm 123 04 Ker crushing plates Height mm: 3000 Fan Power Hp: 30 Star valve Ø mm 320 Tank with 15 solenoid valves Triboelectric probe Spark detection system Output screw conveyor Switch box with inverter Complete with ladders, fencing and piping

Machine on Sale: NOVA JET CLEANING & IRON SCREENS KIT On sale Nova Jet Cleaning & Iron screen kit installed in 2018. Machine is in perfect running conditions and well maintened as worked very few hours (less than 1000h). The complete lot include everything necessary to run the machine along with all perifericals and large set of spare parts for the machine. Machine is fully operational and can be visited for a test and inspection. Lot composition: 1.- Nova Jet Cleaning System for stripping rotary nickel screens. Specifications: • • Max screen lenght 3200mm Rapports available 640mm, 819mm, 914mm y 1014mm (inner brushes for all sizes, most of them new as never been used) Included with Stripping machine • Oil cooler MCO-7OB de 7kw. • Inverter ABB de 55kw • Stripping control unit. 2.- Nova Ironing machine to iron screens after stripping. Specifications: • Ma ...

Decanter Alfa Laval Foodec 700 in excellent conditions. Control Panel not included Decanter Foodec 700 Yr : 2012 Description Bowl : 2 or 3 phase version: 2 phases - open Maximum main speed: 3100 rpm Bowl length: 2565 mm Bowl diameter: 650 mm Beach angle: 20° Solids discharge type: 360°-type with 8 wear liners Solids discharge radius: 175 mm Wear protection solids discharge: Wear liner in tungsten carbide, 8 pieces Solids transportation aids, cylindrical section: Ribs Solids transportation aids, taper section: Ribs Material - hubs: AL 111 2329 (Duplex stainless steel) Material - bowl shell: AL 111 2329 (Duplex stainless steel) Material - bolts: A4-80 (AISI 316) Liquid outlet, type: 8 Standard Plate Dams Conveyor : Features: Windows / Double cone Feed zone type: Esbjerg with exchangeable wear liners (EU3) Pitch: 1x230 mm Flight inclination: Perpend ...

Type: LT200-MY Twin Star Year of construction: 12/2006 Commissioning: 2007 Control: OSP – P200L Delivery time: ex stock The lathe is in very good general condition. Due to the basic and additional equipment, this used machine is versatile. With the automatic bar feeder, the double turret equipment, the additional Y-axis and the parts catcher, the machine produces your workpieces completely independently. From start to finish. Due to the equipment with main and counter spindle, production can be economically effective and fast. Machinery Collet chuck SMW on both sides Main and counter spindle Y-axis Conveyor Bar loading magazine Turbo 5-55 Parts catcher - B-turret with swivel ejection to the collection box (at the door). Onward transport by internal parts conveyor belt. Technical details Swing diameter: mm 400 turning diameter: mm 210 turning length: mm 960 2 tool ...

With very powerful 1100W motor SilentPro10-1 is excellent option for anyone who needs compact and portable compressor that provides considerable air flow rate. Oil-free design and anti-rust inner coating makes it perfect for medical institutions like dental office. Advantages of Aflatek SilentPro10-1: -Compact design. -Much more powerful than other compressors of the same size. -Minimal maintenance needed. -Anti-rust coating. -Air filter. -Low noise and vibrations level. -Oil-free. Technical data: Power supply , V: 230 Motor power, W: 1x1100 Motor speed, Rpm: 1440 Air supply, L/min: 210 Maximum pressure. Bar: 8 Maximum pressure, Psi: 116 Noise Level, dB: 77 Air tank, L: 10 Dimensions(length x width x height), mm: 500x190x490 Weight, kg: 16 Shipping details: Packaging: Carton box Dimensions, (length x width x height), mm: 530x210x500 Weight, kg: 17 T ...

High Power oil-free compressor for workshops, offices, medical institutions and other places where regular compressors of the same size are too loud. Advantages of Aflatek SilentPro300-6: -Six 1100W direct drive electrical motors. -Very large 300l air tank. -Anti-rust coating. -Air filter on each pump. -Low noise and vibrations level. -Oil-free. -Movable on 4 rubber wheels. Technical data: Power supply , V: 3Ph 400V 50Hz Motor power, W: 6x1100(6600) Motor speed, Rpm: 1440 Air supply, L/min: 1260 Maximum pressure. Bar: 8 Maximum pressure, Psi: 116 Noise Level, dB: 85 Air tank, L: 300 Dimensions(length x width x height), mm: 1650x450x850 Weight, kg: 173 Shipping details: Packaging: Plywood box on a pallet Dimensions, (length x width x height), mm: 1720x490x920 Weight, kg: 205 Tracking: Available -Price is with VAT 21% included. Contact us if you  ...

Type: LABELING MACHINE Applicable industries: production facilities, food and beverage factories, retail, others Packaging type: box, bag, bag on any flat surface Packaging material: plastic, paper, metal, glass, wood Automatic Quality: Automatic DrivenType: Electric Voltage: 220 V/50 Hz weight: 84 KG Key selling points: Easy to use Core components: PLC, pressure vessel, gearbox, motor, motor, bearing, gearbox, pump Marking accuracy: ±1 mm Labeling Speed: Standard Model: 30~60pcs/min Outer diameter of the label roll: 300 mm Inner diameter of the label roll: 76 mm Machine Material: Aluminum Alloy, Iron

Less powerful version of SilentPro100-3. Instead of 1100W motors, Silent100-3 has three 550W motors which still makes it very powerful for an affordable price. Oil-free design and anti-rust inner coating makes it perfect for medical institutions. Advantages of Aflatek Silent100-3: Three 550W direct drive electrical motors. Anti-rust coating. Air filter on each pump. Low noise and vibrations level. Oil-free. Easily portable on two rubber wheels. Technical data: Power supply , V: 230 Motor power, W: 3x550(1650) Motor speed, Rpm: 1440 Air supply, L/min: 210 Maximum pressure. Bar: 8 Maximum pressure, Psi: 116 Noise Level, dB: 56 Air tank, L: 100 Dimensions(length x width x height), mm: 1000x400x670 Weight, kg: 58 Shipping details: Packaging: Carton box on a pallet Dimensions, (length x width x height), mm: 1010x415x710 Weight, kg: 66 Tracking: Available  ...

Advantages of Aflatek Air100V: -100l air tank, longer operation. -Multistage air compression. -Powerful 2.2kW belt-driven motor. -Mounted on 4 rubber wheels, portable. Technical data: Power supply , V: 230 Motor Speed, rpm: 2850 Motor power, kW: 2.2 Motor power, HP: 3 Air supply, L/min: 350 Maximum pressure. Bar: 8 Maximum pressure, Psi: 116 Air tank , L: 100 Dimensions(length x width x height), mm: 1180x400x770 Weight, kg: 74 Shipping details: Packaging: Carton box on a pallet Dimensions, (length x width x height), mm: 1200x435x800 Weight, kg: 89 Tracking: Available -Price is with VAT 21% included. Contact us if you need a VAT free offer. -For shipping costs contact us directly.

Advantages of Aflatek Screw10A-200: -Powerful 7.5kW electrical motor. -Integrated 200l air tank. -Air and oil filter already included. -Low noise and vibrations level. -Compact, vertical design. -Up to 10 bar pressure. Technical data: Power supply , V: 3Ph 400V 50Hz Motor power, kW: 7.5 Air supply at 8 bars, L/min: 1100 Air supply at 10 bars, L/min: 910 Outlet diameter, inch: 3/4'' Noise Level, dB: 64 Air tank, L: 200 Dimensions, (length x width x height), mm: 1250x590x1600 Weight, kg: 330 Shipping details: Packaging: Plywood box on a pallet Dimensions, (length x width x height), mm: 1400x700x1800 Weight, kg: 360 Tracking: Available -Price is with VAT 21% included. Contact us if you need a VAT free offer. -For shipping costs contact us directly.

Screw compressor with integrated 300l air tank, air dryer and all of the needed filters. Advantages of Aflatek 3in1 20A: 15kW electrical motor. Integrated 300l air tank. Air and oil filters as well as oil separator already included. Low noise and vibrations level. Compact, vertical design. Integrated air dryer. Technical data: Power supply , V: 3Ph 400V 50Hz Motor power, kW: 15 Drive type: Direct drive Motor protection: IP 54 Air supply at 8 bars, L/min: 2300 Air tank, L: 300 Dimensions(length x width x height), mm: 1400x750x1500 Weight, kg: 430 Shipping details: Packaging: Plywood box on a pallet Dimensions (length x width x height), mm: 1500x900x1600 Weight, kg: 450 Tracking: Available -Price is with VAT 21% included. Contact us if you need a VAT free offer. -For shipping costs contact us directly.

Machine type MIG/MAG welding system MerkLE brand Type M 254 K Connection voltage 3 x 400 Volt Setting range 25 – 250 amps Duty cycle 60 % ED at 250 Ampere 100% ED at 200 amps Current adjustment infinitely variable Cooling transformer by built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed gearbox 4-roller drive DV 25 Fuse 16 amps Dimensions L x W x H 955 x 460 x 780 mm Weight 110 kg Age approx. 25 years Condition workshop tested, good incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch SBT 307 G, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll welding wire D 300, 5 kg 1 pair of welder gloves with cuff 1 piece spare parts box kpl. Equipped 1 can of non-stick spray ME 4000 6 months warranty! 1 piec ...

SPECIFICATIONS: Hydraulic carpentry board pressing system for the production of coffins (oak, poplar, fir and other types of wood) Dimensions of the press mm: 2100 x 1600 with 9 pistons Stroke mm: 150 Complete with: - Automatic loading - 4 pressing units - Automatic unloading - 1 saw for the cross-section max. stroke mm 2800 - 1 manually adjustable device for forming floors and coffin covers - Electrical control box Electric hot and cold operation