box used for sale

Technical data for the pallet rack traverse: Shelving system: Link 51 Type: Boltless XL Included in delivery are: 01x pallet rack traverse, used Material color: yellow Truss type: 4BST Box profile: 80x45 mm Agraffe: 3 hooks Clear width: 2,700 mm incl. inner position angle: W = 20 mm H = 28 mm load per pair of trusses 900 kg, at the same. distributed load 02x safety pins, used Version: kompl. galvanized To secure the longitudinal members against unintentional lifting General information about the article: This item is offered for pickup only. A desired Transport or dispatch of this article is associated with additional costs, which can be queried separately from us depending on the place of delivery or scope of delivery. Our services at a glance: (Prices on request) A Assembly, assembly our general assembly conditions must be observed Shelf insp ...

SALE ONLY COMPLETELY! NO RETAIL SALE! ALSO APPLIES TO WMF MACHINES. THEREFORE SAVE YOURSELF THE CALLS, HOW MUCH DO YOU WANT ONLY FOR THE WMF ETC... Coffee machine - Espresso machines 2x WMF Cafemat 5x Wmf Presto 2x WMF 1000S 11x Thermoplan Tiger (1x WMF 1000 S I kept to myself and is now in my office) in total there are 20 coffee machines A few machines are defective. or a few parts are missing. A box full of parts for the WMF is available. The machines are sold without warranty and guarantee, in net.

Machine type TIG inverter welding system gas-cooled DC system Eurotronic brand Type Porty TIG 1601 DC (i)-2 Connection voltage 1 x 230 Volt Setting range 3 - 160 amps Duty cycle 60 % ED at 160 Ampere 100% ED at 100 amps Current adjustment infinitely variable weldable material thickness 4 mm Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Fuse 16 amps Dimensions L x W x H 400 x 240 x 360 mm Weight 10 kg Age approx. 15 years Condition workshop tested, very good, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece TIG burner SR 17, 8 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box kpl. Equipped Warranty 6 months from the date of delivery Listen-Werk-Price ex stoc ...

Machine type TIG inverter welding system gas-cooled DC system Make EP-Systems Type TopTIG 160 HF Connection voltage 1 x 230 Volt Setting range 5 – 160 amps Duty cycle 60 % ED at 160 Ampere 100% ED at 130 amps Current adjustment infinitely variable weldable material thickness 4 mm Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Fuse 16 amps Dimensions L x W x H 410 x 240 x 320 mm Weight 10 kg Age 4 years Condition workshop tested very good incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece TIG burner 4 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box kpl. Equipped Warranty 6 months from the date of delivery Original price 1.550,00 € + VAT Price kpl. from ...

Heuft boiler Type: KO 400 400kW completely overhauled For thermal oil furnaces and plants with switch box with separate control large white-head burner approx. 150x150cm and 230cm height

Stone slab oven Quail Piccolo I-6 DMS 3 Master Year: 2011 Shared oven -6 floors each 80x60 -each floor fits 2 sheets 60x40cm next to each other long ago -each floor fits a sheet metal 60x80cm transversely -each floor with separate control -Above us bottom heat separately adjustable -each floor with separate swath box -Floor entrance height: 14cm -with base including sheet metal shelf -with exhaust air hood -Control from the oven on the left -Year of construction 06 / 2011 -Electrical connected value: 26.4 kW -Voltage: 400V AC/3Ph/N/PE/50Hz External dimensions: 117cm wide 110cm deep without hood 227cm high

Over-drawing machine Model: IKM 220 with chocolate wheel for pastries of any kind and cakes up to a height of 10 cm Lattice band width 220 mm Capacity approx. 20 kg chocolate Belt speed infinitely adjustable Floor tuners, blowers and vibrators Run-out belt with paper roll Machine mobile Additional heating, veil box Heating oven for 1 heated tub below ( max. 30 kg ) Working direction from right to left Stainless steel Connection 220 V / 1.7 kW Used machine cleaned and tested

New device Special offer!

MBM Commercial Kitchen Technology Germany Flake ice machine MBM Type: ICE 350 IS Stainless steel cladding Coolant: R404a Year of construction 2003 0,800kg Water supply Water drainage With switch box for switching on and off Height: 190cm Width: 125cm Depth: 90cm

Epson G10-854SR Robot Screwdriving Station Dosing Station Assembly of parts for car radios and navigation systems and for testing them. The assembly station is designed as a closed aluminium frame with a steel welding frame inserted and has a very compact design. The control cabinets and valve terminals are integrated into the system. All movement processes during the operation of the system can be tracked on all sides through large windows and doors. Operation is via a touch screen. The assembly station is divided into substations 3.1 dosing area, 3.2 assembly area KK+SW and 3.3 mounting area front. (KK=heat sink, SW=bulkhead angle) The work steps according to these assembly areas are described below: St.3.1: Dosing range - a WT with attached chassis and printed circuit boards enters the dosing area via the transfer belt. - this is stopped at the stroke positioning ...

Machine type TIG inverter welding system gas-cooled DC system Merkle brand Type LiteTIG 190 DC Connection voltage 1 x 230 Volt Setting range 5 – 190 amps Duty cycle 25 % ED at 190 Ampere 60% ED at 140 amps 100% ED at 115 amps Current adjustment infinitely variable weldable material thickness 5 mm Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Fuse 16 amps Dimensions L x W x H 410 x 150 x 240 mm Weight 7.4 kg Age 6 months Condition workshop tested, as new, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece TIG burner 4 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box kpl. Equipped 24 months warranty 1 piece instruction manual List factory price ex stock wit ...

Machine type TIG inverter welding system gas-cooled DC system Merkle brand Type LiteTIG 210 DC Connection voltage 1 x 230 Volt Setting range 5 – 210 amps Duty cycle 20 % ED at 210 Ampere 60% ED at 145 amps 100% ED at 135 amps Current adjustment infinitely variable weldable material thickness 6 mm Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Fuse 16 amps Dimensions L x W x H 410 x 150 x 240 mm Weight 8 kg Age 6 months Condition workshop tested, as new, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece TIG burner 4 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box kpl. Equipped 24 months warranty 1 piece instruction manual Listen-Werk-Price ex stock with 2 ...

-6 floors each 80x60 -each floor with separate control -Above us bottom heat separately adjustable -each floor with separate swath box -Floor entrance height: 14cm -with base including sheet metal shelf -with exhaust air hood -Year of construction 06/2011 -Electrical connected value: 26.4 kW -Voltage: 400V AC/3Ph/N/PE/50Hz -External dimensions approx. 110cm deep without hood 117cm wide 227cm high

Machine type TIG inverter welding system gas-cooled DC and AC system Merkle brand Type LiteTIG 210 AC/DC Connection voltage 1 x 230 Volt Setting range 5 – 210 amps Duty cycle 20 % ED at 210 Ampere 60% ED at 140 amps 100% ED at 130 amps Current adjustment infinitely variable weldable material thickness 6 mm Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Fuse 16 amps Dimensions L x W x H 410 x 150 x 240 mm Weight 9 kg Age 6 months Condition workshop tested, as new, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece TIG burner 4 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box kpl. Equipped 24 months warranty 1 piece instruction manual Listen-Werk-Price ex st ...

Friedrich Etagen Ladenbackofen E 4 6/8 4 floors each 60x80 cm each floor lower and upper heat separately adjustable incl. swath box with base with exhaust hood incl. fan digital control Oven can be driven on castors Floor flaps are made of glass (visible) Oven is in good condition Swath temperature maximum 230° - 275° Dimensions: Height: approx. 208 cm Width approx. 90 cm Depth: approx. 130 cm

Complete sorting plant of Renholmen and RemaSawco The plant can be visited in operation and function until summer 2022. Refurbished in 1996 Power: 400/220 Volt Equipment: 1) Chain conveyor for sideboards and center delivery (buffer zone) 2) Equalization in front of the curve conveyor 3) Accumulation conveyor with curved conveyor 4) Decrypts 2 pcs. To arrange random wood sizes 5) Roller box and buffer table before handling piece by piece 6) Piece-by-piece feeder where the sorter pulls out what needs to be cut off at the top end 7) Sorting station and piecemeal feeding. For manual quality sorting and determination of residual pieces 8) Top-end trim station for manual decision on top trim 9) Conveyor for transport into the sorting hook chains. 10) Hook conveyor chain with steel hook for 40 containers. 11) 40 sliders for pushing down into the right container 12) 40 pieces of  ...

Technical data for the pallet racking system: Shelving system: Mecalux Technical data for installation: Number of shelf rows: 01 pcs. Length per row of shelves: approx. 30,660 mm Number of fields / row of shelves: 11 pcs á 2,700 mm Number of levels plus floor level: 02 pcs. Technical data on the volume: Pallet spaces per field: 09 pcs. Pallet spaces per row of shelves: 09 pcs. Total pallet spaces: 99 pcs. based on: Loading aids: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet ( max. ): 1,000 kg Included in delivery are: 12x pallet rack stand, used Material color: blue Stand Type: M-80-P Stand profilem.: P 80 x 69 x 1.80 mm Incl. transverse and diagonal struts, Base plates The stands are pre-assembled ( screwed truss ) 2,800 mm high 1,100 mm deep 44 ...

Herlitzius bread slicer Type: Planet 3000 Year of construction: 2002 Circular knife machine Stainless steel cladding  with switch box Inlet height and width Adjustable digital control Industrial Machine Height: 220cm Width: 310cm Depth: 142cm

Bar diameter: 0 mm Turning length: 0 mm Slides: 0   CNC Brand: 0 CNC Model: 0 Technical data Diameter of work admitted: 12.5 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.5 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm Various accessories: Electric control-box Controlled clutching device

Technical data for the pallet rack traverse: Shelving system: Jung Heinrich Type: Esmena Included in delivery are: 01x pallet rack traverse, used Material color: yellow Box profile: 100 x 40 mm Truss type: GN 100x40 Agraffe: 5 HK (hook) Clear width: 4,005 mm load per pair of trusses 1,000 kg at the same. distributed load 02x safety pins, used Version: kompl. galvanized To secure the longitudinal members against unintentional lifting General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery can be queried from us.

DIOSNA WENDELKNETER Type: W 120 A for max. 120 kg dough or 75 kg flour Automatic timer with 2 watches 2 speed levels extra switch box incl. 2 extendable stainless steel boilers Plier lock Stainless steel spiral spiral Extra boiler immediately available in stock

Machine type MIG/MAG welding system Fabrikat Castolin Eutectic Type Derby 230 Connection voltage 3 x 400 Volt Setting range 25 – 230 amps Duty cycle 35 % ED at 230 Ampere 60% ED at 154 amps 100% ED at 120 amps Current setting 8 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed gearbox 2-roller drive Fuse 16 amps Dimensions L x W x H 800 x 440 x 790 mm Weight 84 kg Age approx. 20 years Condition workshop tested, good incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch SB 154 G, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll welding wire D 300, 5 kg 1 pair of welder gloves with cuff 1 piece spare parts box kpl. Equipped 1 can of non-stick spray ME 4000 6 ...

Dart Mind TC220 CNC, CNC lathe, CNC Model Fanuc, CNC version 0-T, Main spindle nose ASA 6, Power main spindle 11 Kw, Main spindle chuck diameter 250 mm, Main spindle bar diameter 51 mm, Main spindle RPM 4000, Max turning diameter 350 mm, Max turning lenght 500 mm, Gear box yes, Number of speed 2, Number of turrets 1, Number of fixed toolholders in 1th turret 12, X-axis travel 1th turret 170 mm, Z-axis travel 1th turret 400 mm, Tailstock yes, Quill tailstock travel 60 mm, Cheap conveyor Hinged Belt, Presetting yes, 2001, Length 3640 mm, Width 1850 mm, Height 2000 mm, Weight 5500 Kg

Lister generator set 15 kVA with starter unit - - - - - Engine: - Lister (English manufacturer of industrial engines) - 4 cylinders -Diesel -Water-cooled - 1500 rpm - - - - - Generator: - Manufacturer: Stamford (England) - 15 kVA - 230 / 400 volts - 50 Hertz - AVR - - - - - Control box / starter unit: - Ignition lock for starting - Volt display - Hertz display - Ampere display - Battery voltage indicator - Operating hours counter: 5600 hours - - - - - Condition: -Used - The device was used for emergency protection and for occasional use - A test run with load reduction was made - The engine runs well - The generator generates 400 volts and 50 hertz - - - - - Scope of delivery: - Lister generator set 15 kVA - with starter unit - - - - - Transport: - A Germany-wide transport incl. unloading is possible for an extra charge - To ...

Technical data for the pallet rack traverse: Shelving system: Stow Type: Pal Rack OP Included in delivery are: 01x pallet rack traverse, used Material color: blue Box profile: 100 x 50 mm Version: Head traverse 1,450 mm clear width load per pair of trusses 1,800 kg, with the same. distributed load 02x safety pins, used Version: completely galvanized To secure the longitudinal members Against unintentional lifting

60” x 22” Two Roll Mill Manuf.: Bridge UK With variable speed control Siemens S7 - 1200 Safety PLC. Danfoss 90kW 315 Amp Frequency Drive with Dynamic Braking Resistor Electromotor 90kW 980rpm Front Roll Speed max. speed (50Hz) 14.1rpm Manually adjustable guide plates Manual nip adjustment Failsafe Pneumatic Caliper brake for Emergency Stopping of Mill Flood cooled rolls with rotary unions fitted 8 outlet mechanical lubrication system to roll bearings David Brown gear box – ratio 980:65.1 High speed pinion / bull wheel drive to rolls Safety PLC control for Start up sequence and machine monitoring HMI fitted to main panel for status monitoring of machine Operation Controls – Rolls Stop / Rolls Start / Inch Reversetart / Inch

HBM Hottinger Baldwin Metrology; VKK2; 1996; 4 sensors each up to 2000kg; Stainless steel housing; with central detection unit terminal box; with 4 inputs and 2 outputs; designed for sourdough boiler 5000kg (Electronic scale; weighing system; without evaluation unit!)

Aggregate type: stationary Design: Soundproofed Technical data engine: Engine manufacturer: Yanmar Engine type: 4 TNV 98 T Engine No.: 180067 Motor power: 37.7 KW Cooling: Water-cooled Start: Electric 12 V DC Speed: 1500 rpm Fuel: Heating oil EN 590 Technical data generator: Generator manufacturer: Mecc Alte Generator Type: ECP32.2S4C Gene. Item #: P217148 Generator power: 45 kVA Voltage: 400 / 231 Volt Power factor: cos. - phi 0.8 Speed: 1500 rpm Switchgear: Version: Automatic start Functions: Emergency power operation Switch: Generator switch 4 pole Delivery: Assembled Width approx. mm: Height approx. mm: Depth approx. mm: Tank: Design: Base frame tank with drip tray Width approx. mm: Height approx. mm: Depth approx. mm: Content / Litre: 100 Dimensions of th ...

Coming for sale: several used clamping angles/boring mill angles 1500 to 1800mm wide 2500mm high 1250mm deep Mass: 5.8t Load capacity 60t 6 pieces available tlw with staircase In addition, there are several smaller angles for sale: Clamping angle 1020 x 1025mm No. 81 Clamping angle 805 x 1000mm No. 85 Clamping angle 1660 x 1620mm No. 82 various box angles

Killian NRD 39 Tablet press 39 punching stations, 96,000 - 260,000 tablets/h, currently set for 17mm diameter tablets, with box of other toolings and manual

used shared shop oven Wachtel Piccolo I-5 DMS 3 Master Timer from year of construction 2011 is immediately available for sale in the warehouse in Bielefeld. The furnace is tested for function and cleaned. -5 floors each 60x80cm -each floor with separate control -each floor with upper and lower heat separately adjustable -each floor has its own steam box for steam -each floor with security viewing glass door -with exhaust air hood -with proofing cabinet -Year of construction 08/2011 -electrical power supply 26.9 kW -400V AC/3Ph/N/PE/50Hz Dimensions: Width: 97cm Depth approx. 134cm Height: 237cm

-electric stone slab oven quail -Model Piccolo I-6 -Control DMS 3 m. Clock Timer K -6 floors each 60x80cm -each floor with separate control -each floor with top and bottom heat separately adjustable -each floor has its own steam box -each floor with security viewing glass door -with exhaust air hood -with proofing cabinet -Year of construction: 11 / 2011 -electrical power supply 31.1 kW -400V AC/3Ph/N/PE/50Hz Dimensions: Width: 97cm Depth approx. 134cm Height: 234cm

Decanter Alfa Laval Foodec 700 in excellent conditions. Control Panel not included Decanter Foodec 700 Yr : 2012 Description Bowl : 2 or 3 phase version: 2 phases - open Maximum main speed: 3100 rpm Bowl length: 2565 mm Bowl diameter: 650 mm Beach angle: 20° Solids discharge type: 360°-type with 8 wear liners Solids discharge radius: 175 mm Wear protection solids discharge: Wear liner in tungsten carbide, 8 pieces Solids transportation aids, cylindrical section: Ribs Solids transportation aids, taper section: Ribs Material - hubs: AL 111 2329 (Duplex stainless steel) Material - bowl shell: AL 111 2329 (Duplex stainless steel) Material - bolts: A4-80 (AISI 316) Liquid outlet, type: 8 Standard Plate Dams Conveyor : Features: Windows / Double cone Feed zone type: Esbjerg with exchangeable wear liners (EU3) Pitch: 1x230 mm Flight inclination: Perpend ...

Type: LT200-MY Twin Star Year of construction: 12/2006 Commissioning: 2007 Control: OSP – P200L Delivery time: ex stock The lathe is in very good general condition. Due to the basic and additional equipment, this used machine is versatile. With the automatic bar feeder, the double turret equipment, the additional Y-axis and the parts catcher, the machine produces your workpieces completely independently. From start to finish. Due to the equipment with main and counter spindle, production can be economically effective and fast. Machinery Collet chuck SMW on both sides Main and counter spindle Y-axis Conveyor Bar loading magazine Turbo 5-55 Parts catcher - B-turret with swivel ejection to the collection box (at the door). Onward transport by internal parts conveyor belt. Technical details Swing diameter: mm 400 turning diameter: mm 210 turning length: mm 960 2 tool ...

High: 2.217 mm, Long: 755 mm, Speed: 134/970 rpm, Width: 480 mm, Weight: 440 Kg, Voltage: 220/380 V, Ø column: 150 mm, Base width: 480 mm, Total power: 1.10 HP, Cone spindle: MORSE 3, Length of base: 755 mm, Transmission type: Exchange Box, Spindle motor power: 1 Cv, Ø max. drill steel: 25 mm, Engine cooling power: 0.10 Cv, Spindle displacement: 180 mm, Ø max. steel threaded: M 30, Spindle column neckline: 320 mm, Do not. drill spindle speeds: 8, Angle of inclination of the table: YES, Max. distance spindle axis column: 320 mm, Maximum distance table to spindle: 846 mm, Minimum distance table to spindle: 60 mm, Specification: Column

Output 615 HP Speed 2300 rpm Type of cooling water Number of cylinders 12 With ZF BW160 Type Gear box

Labeller Manufacturer NERI Type BL 400 VTE Series No.M.BAA 137.01 Year of construction 2008 Labeller for boxes max. 400 pieces/min. Box dimensions Length 20- 180 mm x Height 15-120 mm x Width 70-200 mm 2 pages Labelling of Tamper Evident labels horizontal Label roll min. 40 mm max. 400 mm. Incorrect cardboard ejection

Labeller Manufacturer NERI Type BL 400 VTEXL Series No. N 3110018 Year of construction 2011 Labeller for boxes max. 400 pieces/min. Box dimensions length 20- 180 mm x height 15-120 mm x width 70-200 mm 2 pages labelling of Tamper Evident labels horizontal 1 labeller vertical for vignettes Label roll min. 40 mm max. 400 mm. Serialization Make Mettler Toledo YOC 2019 Printer Make Cloud M 610 Incorrect cardboard ejection

Type: LABELING MACHINE Applicable industries: production facilities, food and beverage factories, retail, others Packaging type: box, bag, bag on any flat surface Packaging material: plastic, paper, metal, glass, wood Automatic Quality: Automatic DrivenType: Electric Voltage: 220 V/50 Hz weight: 84 KG Key selling points: Easy to use Core components: PLC, pressure vessel, gearbox, motor, motor, bearing, gearbox, pump Marking accuracy: ±1 mm Labeling Speed: Standard Model: 30~60pcs/min Outer diameter of the label roll: 300 mm Inner diameter of the label roll: 76 mm Machine Material: Aluminum Alloy, Iron

Labeller Manufacturer NERI Type BL 400 VTEXL Series No. N 3110017 Year of construction 2011 Labeller for boxes max. 400 pieces/min. Box dimensions length 20- 180 mm x height 15-120 mm x width 70-200 mm 2 pages labelling of Tamper Evident labels horizontal 1 labeller vertical for vignettes Label roll min. 40 mm max. 400 mm. Serialization Make Systech (Product Tracking) Printer Brand Cloud M 600 Incorrect cardboard ejection

Included in delivery are: 01x pallet rack traverse, used Material color: orange Box profile: 130 x 40 mm Agraffe: 4 HK (hooks) Version: Head traverse Clear width: 2,700 mm 02x safety pins, used Version: kompl. galvanized To secure the longitudinal members against unintentional lifting General information about the article: This item is offered for pickup only. Any further desired transport or dispatch of this article is associated with additional costs, which can be requested separately from us depending on the place of delivery or scope of delivery.

Machine type TIG inverter welding system gas-cooled DC and AC system Brand Hugong Type Wave 200 D III Supply voltage 1 x 400 Volt = plug 5 / 16 A Adjustment range 5 – 200 amperes Duty cycle 15 % ED at 200 amps 60% ED at 153 amps 100% ED at 118 amps Current adjustment infinitely variable weldable material thickness steel / VA: 5 mm Aluminium: 3 mm Cooling inverter by built-in fan Cooling burner gas-cooled Portable compact system version Fuse 16 Ampere Dimensions L x W x H 500 x 240 x 410 mm Weight 20 kg Age 6 months Condition workshop tested as new incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece TIG burner SR 26, Flex, 4 mtr. long 1 piece ground cable 1 pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box kpl. Equipped 1 piece instruction ma ...

Technical data Execution: Vibrating Internal diameter: 1200 mm Height: 350 mm Volume: 300 l Machine´s weight about: 700 kg Overall dimensions machine: Length: 1900 mm Width: 1600 mm Height: 1250 mm Various accessories: Control box Timer

Technical data Diameter of work admitted: 12.5 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.5 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm Various accessories: Combined 3-spindle attachment: 13 Y Electric control-box Controlled clutching device

Technical data Diameter of work admitted: 12.5 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.5 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm Various accessories: Combined 3-spindle attachment: 13Y Electric control-box Controlled clutching device

Technical data Diameter of work admitted: 12.5 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.5 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm Various accessories: Combined 3-spindle attachment: 13 Y Electric control-box Speed accelerator Controlled clutching device

Technical data Diameter of work admitted: 7.00 mm Max. turning length: with flat cames: 60 mm Spindle hole: 8.00 mm Max. treading diameter: 6 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1400 rpm up to: 10000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 2.0 HP Machine´s weight about: 520 kg Overall dimensions machine: Length: 1200 mm Width: 700 mm Height: 1400 mm Various accessories: Combined 3-spindle attachment: 13Y Simple spindle stoping device Electric control-box Controlled clutching device

Technical data Diameter of work admitted: 10.00 mm Max. turning length: with flat cames: 60 mm Spindle hole: 11.00 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1700 rpm up to: 12000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 800 kg Overall dimensions machine: Length: 1440 mm Width: 900 mm Height: 1600 mm Various accessories: Combined 3-spindle attachment: 13 OA Back drilling attachment: 12 AD Electric control-box Swivelling stop Central lubrification

Technical data Diameter of work admitted: 10.00 mm Max. turning length: with flat cames: 60 mm Spindle hole: 11.00 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1700 rpm up to: 12000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 800 kg Overall dimensions machine: Length: 1440 mm Width: 900 mm Height: 1600 mm Various accessories: Back drilling attachment: 12 AD Electric control-box Swivelling stop Central lubrification

Technical data Diameter of work admitted: 10.00 mm Max. turning length: with flat cames: 60 mm Spindle hole: 11.00 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1700 rpm up to: 12000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 800 kg Overall dimensions machine: Length: 1440 mm Width: 900 mm Height: 1600 mm Various accessories: Back drilling attachment: 12 AD Electric control-box Swivelling stop Central lubrification