bowe p used for sale

Folding and Inserting Machine: speed: upto 4.000 per hour, maximum monthly performance: 70.000, maximum annual output: 600.000, power required: 230V, noise level:

Description: Measurement ranges 20 to 25, 25 to 35 and 35 to 50 mm Approx. Onsite Dimension. (l x w x h): 300 x 200 x 50 mm, weight approx.: 3 kg

Radial drilling machine make VEB Schmölln Bowes type BR 40x1250/1Machine -No: 691354Technical specifications:Drilling capacity in ST 60:40 mmDrilling capacity in GG 255 mmProjection: 1250 mmDrilling depth: 355 mmClamping area: 1450 x 920 mmRemove drilling spindle - base plate: 375 x 1375 mmBoom height adjustment: 750 mmLateral movement of the headstock: 950 mmDrilling spindle speeds: 20 - 1200 rpm.Feed range 6 x: 0.063 - 0.63 mm/revConnection value of the machine: 4.7 kWRequired space: 2050 x 930 mmHeight of the machine Transport height / max boom above: 2800 /3200 mmWeight approx.: 3000 kgColor greenwith- Dice table- new electricsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for you ...

Curved tooth coupling, coupling KTR Kupplungstechnik BoWex M-14 1x hub for shaft diameter: Ø 10 mm, groove width: 3 mm 1x® hub for shaft diameter: Ø 14 mm, groove width: 5 mm hub diameter: Ø 25 mm, length: 12 mm sleeve color: white 2x locking screw: M5 Material: steel Coupling diameter: Ø 40 mm Coupling length: 50 mm New ! Dimensions: 50 x 40 x 40 mm

Glaze line, Type Jelly Power Pack JLC, Fabr. Boyens,

Downpour record Grey iron GGG50 1500 x 1500 chamber filter records Downpour records for chamber filter pressing 1500x1500 we can offer to you for almost all arrangements chamber filter records also in PP, filter cloths and spare parts almost all manufacturer.

Drum pump, hygienic ExzenterschneckenpumpeVon of the company GrünpumpenTechnische DatenTyp ds.: LDS 80.1Ser. No.: 0259 Qm³ / h 2,40N1 / min: möglichVerpackung 6,75ZahlungsmodalitätenBarzahlung pick up and transfer in advance and shipping pick up, shipping via forwarding and abroad by prior arrangement all data were listed to the best of our knowledge and belief.Errors are reserved. This auction is aimed only at professionals, dealers, and other legal persons.

; ready for operation

Flygt pumps model 3085 Top quality! Steel case, stainless steel shaft 2 kW 1395U RPM Flow rate corresponds to ca 30 l / s 1800 l / min Total length ca. 80 cm, 60 kg Very good condition! â?¬499 This is not a DIY part, these pumps are offered usually for twice. Preferred site 76829 Landau, pick up, delivery possible

Offer via gebr. Pipe separation and chamfering machine Fabr. GF Type AVM RA6 Technical data: Outer pipe diameter 75-183mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed Speed levels electronically 1 - 6 Power 1600W used, in good condition.

Offer via gebr. Pipe cutting- chamfering machine Fabr. GF GEORG FISCHER Type RA41 Built in 2009 Technical data: Outer pipe diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270 rpm. Speed levels electronically 1 - 6 Power 1600 W incl. pipe feeding unit height-adjustable Used

Offer via gebr. Pipe cutting- chamfering machine Fabr. GF GEORG FISCHER Type RA41 Built in 2009 Technical data: Outer pipe diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270 rpm. Speed levels electronically 1 - 6 Power 1600 W incl. pipe feeding unit height-adjustable Used

Offer via gebr. Pipe cutting- chamfering machine Fabr. GF GEORG FISCHER Type RA41 Built in 2001 Technical data: Outer pipe diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270 rpm. Speed levels electronically 1 - 6 Power 1600 W incl. pipe feeding unit height-adjustable Used

Offer via gebr. outdated - pipe separation and chamfering machine Fabr. GF Type RA6 Saw has been completely overhauled and tested. - Engine completely new - Gearbox re-stored and new seals Technical data: Outer pipe diameter 75-183mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 40 - 215 rpm. Speed levels electronically 1 - 6 Power 1800 W incl. mounting plate used, in good condition.

Offer via gebr. outdated - pipe separation and chamfering machine Fabr. GF Type RA4 Saw has been completely overhauled and tested. - Engine re-stored and new seal. - Gearbox re-stored and new seals Technical data: Outer pipe diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270 rpm. Speed levels electronically 1 - 6 Power 1600 W incl. mounting plate used, in good condition.

Offer via Gebr. overhauled pipe cutting chamfering machine Fabr. GF GEORG FISCHER Type RA12 Saw was completely overhauled and tested. - completely new drive motor. - Gearbox re-bearings and new seals Specifications: Pipe outer diameter 215-325mm Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 40 - 215 rpm. Speed stages electronic 1 - 6 Power 1800 W incl. feeding unit and auxiliary unit used, in good condition.

Offer via Gebr. overhauled pipe cutting chamfering machine Fabr. GF GEORG FISCHER Type RA12 Saw was completely overhauled and tested. - completely new drive motor. - Gearbox re-bearings and new seals Specifications: Pipe outer diameter 215-325mm Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 40 - 215 rpm. Speed stages electronic 1 - 6 Power 1800 W incl. feeding unit and auxiliary unit used, in good condition.

Vacuum pump, airframe pump, rotary vane pump ALCATEL type 100-132 Fabr. No. 173082 - 3101 Year of construction: approx. 1995 Volume flow: approx. 50 m3/h Negative pressure: 0.5 mbar (indicated on the type plate)Negative pressure: - 0.9 bar (determined during test run) Motor power: 3 kW Motor speed: 1420 rpm. Mains connection: 400 Volt, 50 Hz - Oil-lubricated rotary vane pump Dimensions L x W x H: 700 x 420 x 310 mm Weight: 78 kg good condition; used

Single column hydraulic press, straightening press, punching bar ECKOLD press frame with hydraulic cylinder, mobile press, punching unit type RSD 1500 - 125 Masch. No. 317 / 690 Year of construction approx. 1986 Compressive force 150 ton. Projection 125 mm Ram stroke 35 mm Table size 280 x 210 mm Ram surface 125 mm Installation height (tappet to table) max. 265 mm Table height above corridor 403 mm Hydraulic operating pressure max. 500 bar - without hydraulic unit tappet surface with 4 threads M16 and 20 mm guide groove, in the middle a centering hole 15 mm- 1 piece high-pressure hydraulic hose with male thread M30x1.5 mm , Hose length 4 meters - 1 piece High pressure hydraulic hose with union nut M30x1.5 mm, hose length 4 meters Space requirement L x W x H 700 x 300 x 1450 mm Weight 1250 kg good condition; used

Tandem cutter rollers for cutting table

Power Distributors VAT not deductible Please inquire with location and postcode

Post of 9 stueck submersible pumps and dirty water pumps Manufacturer: Heath Pumps Pumpex (Sweden) Flygt Spt Soendgerath Power ratings from 1.5kw to 6.5kw Pumping capacities up to 120m3/h Foerderhoehe up to 80m Various controls for pumps also with operating hour counter, with float switch or with level monitoring New price of a large pump 4,500.-EUR The pumps were in use for a maximum of 3 years and have been stored ever since. Special price

Used Membrane Filter Press, Chamber Filter Press for sludge dewatering Rittershaus & Blecher / VEB Stassfurt 1000x1000 ( Mix-Paket) Plate size: 1000x1000mm Cake thickness: 40 mm length: 5500 mm Number of Plates: 60 filter pressure: 8 Bar Membrane pressure: 15 Bar Plate transport: manuell filterclothes: optional Membranmix-Paket The machine is in a goog condition and 15 machines like this availabe.

Infeed / Outfeed device

pressure:200 t distance between columns:2900 mm stroke:800 mm dimensions of the machine ca.:3300 x 2700 x 3100 mm Table dimensions:2500 x 2000 mm :4000 mm :33 mm/sec :33 mm/sec distance table - lower edge of ram:1100 mm table height over floor:750 mm :2300 mm return capacity:25 t total power requirement:15 kW Oil Cooling:1 kW stroke speed:18 mm/sec down speed:2 - 10 mm/sec :200 l table plate:100 mm distance between columns:2400 mm open height:1000 mm weight:9 t Table Height:750 mm :34 Lt./min. Impact leper extension removable (200 mm long):550 ? Table top flattened, with or without T-slots:7900 ?

Waelz piston pump booster Manufacturer: Busch Type: Panda WV 0500 C/B and Panda WV 1000 C/B available suction swells: 500 - 1000 m3/h Performance: 12 months Status: Generalueberholt Delivery time: by arrangement; ready for use

Waelz Piston Pump Booster Vacuum Pump Manufacturer: Busch Typ: Puma WP 1000 D2 Status: used, tested A complete recovery can be offered as an alternative. Then with 12 months of service to the geraet.; ready for use

Platform stairs for assembly or maintenance on containers or truck bodies, etc. Weight 328 Kg Belbility platform max 300KG each 150Kg per side Stand area 25002250mm with folded side work surfaces with folded out side parts 3850mm Work surface platform size 3850 1000mm Stand height measured from the ground 2200mm

spare parts - dimter press cylinder for cycle press PN 25 H Press cylinder for hydraulic clock press 20 + 25 to

pressure:200 t distance between columns:1550 mm stroke:400 mm dimensions:ca. 4400 x 3250 x 4100 mm Table dimensions:1500 x 1500 mm distance table - lower edge of ram:1590 mm return capacity:20 t total power requirement:20 kW Oil Cooling:1,5 kW stroke speed:25 mm/sec down speed:10 mm/sec :250 l table plate:120 mm Table cut-out:550, 450, 350 und 200 mm table speeds:30 mm/sec

l 45 kw POWER 680 kg/h (depending on material/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSAGE SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for wood chip raw material - Pellet mill with main motor 45 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system to control the blockage of the Matritze Humidity monitoring - Cooling and dedusting system for the pellets produced via a screw

Hand pitter for plums and plums, with right- and left-handed handle

Power supply, power converter, power supply, switching power supply, DIN rail power supply, power supply, servo module, dual power supply -Manufacturer: Escherich high-voltage power supply Power Unit 55 FC -Type: PU55 FC-230V / ES023 -Voltage: 230V/50-60Hz -Quantity: 2x power supply available -Price: per piece -Dimension: 235/120/H140 mm -Weight: 2.9 kg/pc.

Converter, power supply, power supply, switching power supply -Manufacturer: Siemens, SITOP Power 10 power supply -Type: 6EP1434-1SL01 -Input: 230/400 V 3 AC 50/60 Hz -Output: 24 V DC 10 A -Number: 6 pieces available -Price: per piece -Dimensions: 130/240/H125 mm -Weight: 3.3 kg/piece

Scheugenpflug DOS P016 Piston Feeder Piston dosing system DOS P for a wide range of requirements The piston dosing systems from Scheugenpflug work according to the principle of volumetric dosing, i.e. the dosed amount of material is mechanically determined by the geometry and stroke of the associated cylinders. The cylinder is filled with the potting material by feeding it from the corresponding material conveyor system. If a two-component medium is used, the volume of the two cylinders simultaneously determines the ratio of the resin and hardener components to each other. The dosing pistons simultaneously push the two components in separate channels towards the exhaust valve, where they only mix in the static mixing tube to form a homogeneous reactive medium. The Dos P016 / 050 / 100 / 300 / TCA piston dosing systems are high-precision volumetric dosing systems designed for pr ...

capacity 5 kilos of popcorn per hour - professional machine - Teflon coating - heated and illuminated cooking chamber - stirring system and automatic thermostat

capacity 5 kilos of popcorn per hour - professional machine - Teflon coating - heated and illuminated cooking chamber - stirring system and automatic thermostat

capacity 5 kilos of popcorn per hour - professional machine - Teflon coating - heated and illuminated cooking chamber - stirring system and automatic thermostat

capacity 5 kilos of popcorn per hour - professional machine - Teflon coating - heated and illuminated cooking chamber - stirring system and automatic thermostat

Transducer (CMM) rigid probe RENISHAW Type PH5 + TP20 + PEL1-50 Probe for measuring machine Serial: 77501 - A Probe holder Probe body TP20 for interchangeable modules (probe modules) Extension - type PEL 1, length 50 mm Probe attachment M8 thread Head mounting with MS shaft 9.5 mm - Status display with 2 LEDs - Cable connection via 5-pin DIN 180 socket - 5 threaded connections M8 for touch probe (4 pieces of blind plug) Total weight 280g used in good condition; used

Punching units, punching unit, punching bracket, punching tool, non-driven clinking and shearing units, forming bracket -Manufacturer: SUPRA, punching bracket GN4 type PA80 400 with punching tool -Throat: 400 mm -Punching capacity: mm -Matrix: Ø 75 mm -Dimensions: 570/120/H140 mm -Weight: 27.6 kg

Approx. Onsite Dimension. (l x w x h): 400 x 400 x 400 mm, weight approx.: 20 kg

Cat-Nr 09-2070 in a very good condition! Apex 1500 Pressing Station is a continuous pressing system for the production of fruit juice.The advantages of the APEX Pressing station are universal application for several kind of fruits, we have experience with Apples, Pears, Grape juice, Cherries, Strawberries, Red currents. Technical Data: Capacity: 14 to/h Length: 6646 mm Width: 4110 mm Height: 5630 mm Weight: 8000 kg Width of belt:1500 mm Speed of belt:0-11 m/min Air pressure min:>4 bar Air pressure max:8 bar More Information and photos upon request! Manual Instructions available! Subject to prior sale. All prices are valid Ex-Works, excl.VAT. The mentioned price is valid inly for 1 Pressing Station 1500. Freight Charges: depending on dimensions and destination. Delivery: from 97753 Karlstadt-Karlburg

Kat-No 08-1514 in very good condition - checked! Pump diagnostics: Pressure test: 4 bar Suction capacity up to -1.5 bar: -0.5 Conveyor pressure: 3 bar Power: 23,500 liters/h Ampere min/max: 3.8 Other pump types or our complete range (tanks, pumps, filters, beverage technology) on request! For questions call 09353 909050 or 0171 651 8248 Fax: 09353 9090522 All prices are ex works, plus Vat Intermediate sale reserved. Freight cost share: by scope of delivery Sightseeing is also possible on weekends or evenings by appointment.

Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Diesel tank 16,000 liters double-walled used, with a used diesel pump DK 70 EZ: The pump is 1 year young and was overhauled by the manufacturer general. The container is used, cleaned, overhauled and is equipped with the following fittings: 1 optical leak detector with type approval and leakage liquid (new) 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII) (new) 1 ladder 1 diesel pump DK 70 EZ Container dimensions Length 8,290 mm Diameter 1,600 mm Weight approx. 3,000 kg Of course, you can also use your tank system. We are happy to offer you diesel pumps with a hig ...

Kat-No 08-1632 in very good condition HxLxW: 56x78x30 cm For further information: Tel: 09353 909050 or Fax: 09353 9090522 Mobile: 0171 6518248 All prices are ex works plus law VAT Intermediate sale reserved Freight cost share: by scope of delivery Delivery time: immediately from stock Sightseeing is also possible in the evening or on weekends by appointment.

Cat. No. 07-1268 in very good condition Type SEP 100.1 Design: H1 PO1 Dimensions: Length: 143 cm Width: 56 cm Height: 143 cm Capacity: 60 litres/min., 3600 l/h Pressure: 6 bar Engine power: 4 kW DN 65 For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our complete catalogue. Sightseeing is also possible in the evening and on weekends by appointment. All prices are ex works plus law VAT Intermediate sale reserved! Freight cost share: by scope of delivery