bottom used for sale

Non-stackable stainless steel tank manhole diameter 400 mm Event Lateral tank bottom drain with 49mm diameter butterfly valve Maximum allowable pressure:-0.15/+0.65 bar Test pressure: 1.3 bar Maximum allowed temperature:-10/+50°C, Volume: 1000 Liters, Tank bottom diameter: Diameter 72mm, Event: 49 mm, Mobile tank: No, Link to manufacturer: http://www.stocklin-logistics.fr/pein/metre-cube/

Stainless steel stackable tank 400mm diameter manhole 72mm diameter vent Lateral tank bottom drain with 49mm diameter butterfly valve Maximum allowable pressure: -0.15/+0.65 bar Test pressure: 1.3 bar Maximum admissible temperature: -10/+50°C, Volume: 1000 liters, Tank bottom outlet: Diameter 49mm, Event: 49 mm, Weight (kg): 136

Wadkin GDU 6 spindle planer Working width 220mm Working height 120mm Spindle arrangement Bottom 5.5kw Rights 5,5kw Left 5.5kw Top 7,5kw Bottom 5.5kw Universal 5.5kw Adjustable spindles Feed speed adjustable on variator Pneumatic material pressure Electric lifting of pressure rollers Feeding table length 1900mm

I am selling the new four-way planer LEADERMAC COMPACT 624 C UG-1, New machine built in 2022. Configuration 6 spindle: Bottom 5.5 kW / 7.5 HP / creasing tool special included Right 11.0 kW / 15.0 HP Left 11.0 kW / 15.0 HP Above 11.0 kW / 15.0 HP Bottom 7.5 kW / 10.0 HP Universal 7.5 kW / 10.0 HP Feed speed adjustable 6-36 m/min. Feed motor 5.5 kW / 7.5 HP + inverter Element max. width 20-240mm Element max. height 10-200mm ! All 6 spindles 6000 rpm. Schneider Touch-Screen EASYSET Electronic programming for working width, working height and contact height Material proofs for short elements. 3-zone pneumatic material pressure system for feed Total weight 6500kg. Fully operational. Available right away. Exhibition machine, completely NEW !

I am selling the new four-way planer LEADERMAC COMPACT 623C U-2, New machine built in 2022. Configuration 6 spindle: Bottom 5.5 kW / 7.5 HP Right 5.5 kW / 7.5 HP Left 5.5 kW / 7.5 HP Top 7.5 kW / 10.0 HP Bottom 7.5 kW / 10.0 HP Universal 7.5 kW / 10.0 HP Feed speed adjustable 6-36 m/min. Feed motor 3.0 kW / 5.5 HP + inverter Gf2x3u9 Element max. width 25-230mm Element max. height 10-150mm All 6 spindles 6000 rpm. Schneider Touch-Screen EASYSET Electronic programming for working width, working height and contact height Material proofs for short elements. 3-zone pneumatic material pressure system for feed Combined weight 6000kg. Combined power 44.25 kW / 59 hp Fully operational. Available right away. Exhibition machine, completely NEW !

Four-sided planer Weinig Hydromat 23C Planing width 20-230mm Planing height 8-160mm Number of heads 6 Head system Bottom 7.5kw Right 7.5kw Left 7.5kw Top 11kw Top 7,5kw Bottom 7.5kw Total power 54kw Pulling rollers in the working table 4 Pneumatic clamps 5 rows of gear pulling wheels 2 rows of rubber pulling wheels Feed speed adjustable on the inverter Soundproofing the cab in the machine CE Certificate Year 2000

Capacity: 230 x 130 mm. Spindles: 8 Bottom 7.5 kW, fence 7.5 kW, near 7.5 kW, 2nd fence 7.5 kW, 2nd near 7.5 kW, top 11 kW, bottom 7.5 kW universal 11 kW Grooved bed Cardan shaft drive Pneumatic pressures Intermediate driven feedroller for short pieces Automatic bed lubrication Spindle diameter: 40 mm. Spindle speed 8000 r/min 5 driven feedrollers in table Feed: 6 - 36 m/min, motor 5,5 kW Automatic hopperfeed Tooling not included

Motorised height-adjustment Sound enclosure over all trimming motors Equipment: Coil and strip magazine Hot melt unit Pressure zone End trims, chamfer and straight, automatic adjustment Top/bottom rough trimming Top/bottom fine trimming, tilting, Contour trimming unit Scraping unit Buffing unit return conveyor Ligmatech ZHR 05

WEINIG four-sided planing machine, PM 17, 5 spindles Machine No. 1329-2356 Year of manufacture: 1982 Working width 170 mm Planning height 120 mm 5 spindles: max. tool length 180 mm, 130 mm Feed table length 2000 mm with planing heads 6 spindles arrangement: 1. Bottom 4 kW 2. Right 3 kW 3. left 5.5 kW 4. Top 5.5kW 5. Bottom 4kW / universal Spindle diameter approx. 35 mm Feed speed 6.5 - 49 m/min. manual lubricant pump Incl. 5 tools for all heads Dimension 4500 mm x 1300 mm x H 1500 mm Weight approx. 3800 kg Technical data subject to correction

MARTIN T90 Year of construction 1996 Nominal current: 64 A max. planing width: 260 mm max. planing height: 160 mm 5 spindles: 4x Tersa planer head + 1x universal spindle Spindle arrangement: Bottom – Right – Left – Top – Universal Spindle 1 – 4: 4 knife shaft – Tersa Use of profile knives for chamfers and radii possible (spindle R + L + O) Spindle 5: Universal 40 mm spindle (max. tool diameter: 220 mm) swivel (- 45° / + 90°) Bottom: 5.5 kW Left+Right: 5.5 kW Top: 5.5 kW Universal: 7.5 kW Feed speed: 4 – 25 m/min. (infinitely variable) electronic positioning control (storage of up to 100 pairs of dimensions possible) Engine brake Central lubrication Extras: Universal spindle Table extension at the spout Hold-down device for joining shaft right incl. 8 new rubber pull-out rollers Suction connection: 250 + 160 mm Dimensions: L: 524.5 cm W: ...

YOM (2008); Max. Roll Length 17 Meter; Min. Daylight between Roller 960mm; Max. Ram stroke 1040 mm; Top Roll diam. 480 mm; Bottom Roll 400 mm; 6 sets of Back-up Rolls; Min/Max Bottom Roll Centers 500/800 mm; Pressing Speed 1 to 6 mm/sec. ram approach 60 mm/sec; main motor 125 HP. Including control panel, panel boxes and conveyors. Weight: 600.000,00 Capacity: 2000 TON, Working size: 17000mm x 35t, 5500 x 40t

Four-sided planer Leadermac 823 Working width 230mm Working height 160mm Head system Bottom 11kw Right 7.5kw Left 7.5kw Top 11kw Top 11kw Bottom 11kw Rights 15kw Left 15kw Upper heads with supports Feed regulated on the wave Feed motor 7.5kw Rollers pulling in the table material Pneumatic upper pulling rollers Adjustment of heads by controller

Stock # U2333-8 Used vertical stainless steel storage tank by Kates (PL) type 2Z1,6 with working volume 1600 l. Tank has internal dimensions: diameter 1280 mm x straight side of wall 1330 mm. Tank has slightly conical bottom with central outlet. Valve not included. Side walls and bottom are layered with stainless steel safety jacket (has inspection window). Top welded, has manway with bolted lid diameter 625 mm. Tank is mounted on three stainless steel legs with tension sensors and stainless steel supporting frame. Sensors are connected to scale panel which is in Ex design. Shipping dimensions (in horizontal position) L 240 cm x W 155 cm x H 170 cm x weight about 500 kg.

SPECIFICATIONS: Pre-spindle machine inlet: 2000 mm Working width: 210 mm Working height: max. 120 mm Cardan shaft drive Drive shaft power: 2.2 kW I. Spindle: Bottom (4 kW) II. Spindle: Right (3 kW) III. Spindle: Left (4 kW) IV. Spindle: Right (5.5 kW) V. Spindle: Above (5.5 kW) VI. Spindle: Above (5.5 kW) VII. Spindle: Bottom (4 kW) With tools

Four-sided planer Weinig Profimat 22N ATS system Working width 220 mm Working height 120 mm Number of spindles: 6 Spindle arrangement: Bottom/Right/Left/Up/Down/Universal Spindle diameter: 40 mm 4 planing heads included Engine power: 1Bottom: 4 kW 2/3 L/P: 5.5kw 4. Top 5.5 kw 5: bottom 4 kW 6 universal : 4 kW ATS System

Labeling machine Manufacturer: BBK 2-sided labeler top and bottom, bottom labeler including thermal transfer printer

Catalogue number: 6824 TECHNICAL SPECIFICATIONS - max width of the workpiece 220mm - max height of the workpiece 125mm 4 spindles: 1) horizontal bottom 220mm 7,5kW 2) vertical right 125mm 3) vertical left 125mm; (2 and 3 spindles) 11kW 4) horizontal top 220mm 11kW - all spindles adjustable up/down, right/left - spindle diameter 40mm - 4 pulling, toothed and metal insertion rollers from above - from above 1 double shaft pulling, rubber - from the bottom of the pulling shaft, rubber - feed on cardan shafts - smooth regulation of feed speed 6-22m / min - feed motor 3kW - lifting motor 0,55kW - electrical setting of planing thickness - length of the introductory table top 2470mm - central lubrication - diameter of extraction connection 3x120mm, 140mm - locked in the cabin - dimensions length / width / height 3940x1450x1470mm - weight 1666kg – unpainte ...

SPECIFICATIONS: Planer: 2500 mm Machinable width: max. 210 mm Working height: max. 150 mm Cardan shaft drive Drive shaft power: 5.5 kW Spindle configuration: I. Spindle: Bottom (4 kW) II. Spindle: Right (4 kW) III. Spindle: Left (5.5 kW) IV. Spindle: Right (4 kW) V. Spindle: Top (4 kW) VI. Spindle: Bottom (4 kW) VII. Spindle: Universal spindle (5.5 kW) With tools.

Four-sided planer Weinig Profimat 23E Working width 230mm Working height 120mm Number of spindles 6 Bottom 5.5kw Right 7.5kw Left Top 7.5kw Bottom 4kw Universal 7.5kw Spindle diameter 40mm Operating speed 24m/min Pneumatic clamps for pulling rollers Electric pressure beam adjustment Worktop lubrication system Year of Build: 1998

Stock # U2421-1 Used vertical stainless steel (AISI 304) mixing tank by ZUGIL (PL) with a working volume 12500 l. Inside dimensions: diameter 2600 mm x length of straight side of wall 2550 mm. Tank has top mounted 2 level paddle type agitator, driven by reducer and el. motor with power 4 kW, 380 volt 3/50 Hz. Working rotation of agitator up to 18 rpm. Agitator is supported at bottom. Mixing chamber is equipped with 4 baffles welded to the wall. Top flat, with bolted stainless steel cover, equipped with hinged inspection manway. Bottom, elipsoidal, welded, with central discharge outlet. Tank is mounted on (3) legs carbon steel legs. New 2003. Last time used in chemical production.

Stock # U2421-3 Used vertical stainless steel (AISI 304) mixing tank by ZUGIL (PL) with a working volume 10000 l. Inside dimensions: diameter 2600 mm x length of straight side of wall 2100 mm. Tank has top mounted 2 level paddle type agitator, driven by reducer and el. motor with power 4 kW, 380 volt 3/50 Hz. Working rotation of agitator up to 18 rpm. Agitator is supported at bottom. Mixing chamber is equipped with 4 baffles welded to the wall. Top flat, with bolted stainless steel cover, equipped with hinged inspection manway. Bottom, elipsoidal, welded, with central discharge outlet. Tank is mounted on (3) carbon steel legs. New 2003. Last time used in chemical production.

Stock # U2423-1 Used stainless steel conical nauta type powder mixer by Pharming type HV 1000 (CZ). Cone has diameter 1550 mm x height 2200 mm. Total volume of tank about 1700 l, working volume up to 1000 l. Total height 324 cm. Standard mixing screw is top driven by el. motor 3 kW, 970 rpm, 230-400 V, 50 hz, and supported by bottom pintle bearing. Arm rotation - 2 rpm. Screw rotation - 60 rpm. Discharge via bottom rotary slide outlet valve, operated manually. Mixer is mounted on 3 lugs with carbon steel supports. Included technical documentation. Shipping dimensions: length 330 cm x diameter 170 cm x weight approx 1000 kg. Machine had been working in food industry.

Stock# U2423-2 Used stainless steel conical nauta type powder mixer by Pharming type HV 600 (CZ). Cone has diameter 1440 mm x height 1855 mm. Total volume of tank about 1300 l, working volume up to 600 l. Total height 2770 mm. Standard mixing screw is top driven by el. motor 3 kW, 965 rpm, 230-400 V, 50 hz, and supported by bottom pintle bearing. Arm rotation - 2 rpm. Screw rotation - 60 rpm. Discharge via bottom rotary slide outlet valve, operated manually. Mixer is mounted on 3 lugs with carbon steel supports. Included technical documentation. Shipping dimensions: length 277 cm x diameter 180 cm x weight 600 kg. Machine had been working in food industry.

Grid plate, clamping plate, clamping table, machine table HECKERT CWK400 Clamping surface: 400 x 400 mm Working height: 92 mm all threads on clamping surfaces M12 x 1.75 holes ( top ): Ø 20 / 50 mm fixing bolt ( top ): Ø 50 x 10 mm holes ( bottom ): 1x Ø 32 mm, 2x Ø 25 mm thread (bottom): 4x M16 x 2.0 bore with driver: Ø 130 / 200 mm holes (holder): 2x Ø 36 mm spare part for machining center HECKERT CWK400 D ! used, tested ! Dimensions: 490 x 400 x 105 mm

Leveling shoe, machine foot, wedge foot, freestanding, 4 pieces FARRAT MACHINERY Ltd. Support height: 76 - 92 mm Support height ( in middle position ): 83 mm Support surface ( top / bottom ): 155 x 75 mm / 175 x 90 mm Plate thickness ( top / bottom ): 8 / 6 mm width across flats: 19 mm Material: cast iron Other quantities on request ! used, tested ! Dimensions ( one foot ): 192 x 92 x 83 mm Dimensions ( packaging ): 200 x 180 x 200 mm

Key data: 5 , 300 mm, 200 mm

Spindle arrangement: scoring saw at the bottom - planing shaft at the bottom - top - right - left Diameter of spindles: 40-X-X-50-50 Spindle Speed: 5400 Counter bearings: 2-3 Jointer: 2-3 Engine powers: 15-45-55-22-18,5 Adjustment of the working width: digital Adjustment of the working height: digital Feed speed : 50 - 200 Feed motor: 45 KW Feed: Cardan Horizontal tool head D205 Vertical tool head D160xH100 Z12 Table height constant approx. 1000mm Diameter of suction nozzles 200-250-160-160-120 Weight 13000 kg

Deck oven Electric oven Wiesheu with IS 500 control Type: EBO 2-68 - Bottom heat and top heat can be controlled individually - 2 baking shelves each 1 x 600 x 800 mm - Mobile oven with brake - Extractor hood / condenser at the top of the storage compartment in the middle - Proofer at the bottom - Modular construction system - Connection 400V, 8.1 kW, 2 x 16A-CEE plugs - Water connection 3/4 inch, water drain for DN 40 - Dimensions: 930 x 1350 x 1900 mm, WxDxH Used oven More bakery machines in stock!

Cutting and planing machine MAKA / Weinig • Lift table • Multi-rip saw MAKA type V350: o Year of construction: 1996 o Chain width (mm): 350 o Cutting height max. (mm): 120 o Engine power (kW): 22 o Feed rate (m/min.): 0 – 40 • Material transfer to the moulder • Moulder Weinig PFA 14/7: o Working width (mm): 140 o Shafts: 7 o 1st shaft: bottom o 2nd shaft: right o 3rd wave: left o 4th shaft: right o 5th shaft: top o 6th shaft: bottom o 7th wave: Uniwelle

Manufacturer: Weinig , Type: Unimat 30 EL, Year: 1999, Control: Siemens, Planing widht mm: 300, Planing hight mm: 120, Number of spindles: 6, Elektronische Achsverstellung: no, Work piece width min-max mm: 300, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 120, Saw unit kW: no, Table rollers: no, Rotations of spindles max. rpm: 6000, Spindle arrangement: U/R/L/R/O/U, Separate engine per spindle: yes, Fully suspended drive feeding: yes, Feeding - kW: 5,5, Feeding speed min-max m/min: 5-36, Feeding speed continous adjustable: yes, Pneumatical top pressure: yes, Jointer Stück: no, 1.Bottom spindle kW: 7,5, 2nd spindle on right kW: 5,5, 3.Left spindle kW: 5,5, 4th spindle on right kW: 5,5, 5.Top spindle kW: 7,5, 5th spindle at bottom kW: 7,5, Noise enclosure: Kabine, FREE TEXT: inkl.3 Hebebühnen und und eine Apstapelanlage/, Year :1999

Manufacturer: Weinig, Type: Unimat 17, Planing widht mm: 170, Planing hight mm: 120, Spindle diameter in mm: 35, Rotations of spindles max. rpm: 6.000, Spindle arrangement: U / R / L / R / O / U, Feeding - kW: 4, 1.Bottom spindle kW: 4, 3.Left spindle kW: 3, 4th spindle on right kW: 3, 5.Top spindle kW: 4, 6th spindle at bottom kW: 4,

Manufacturer: Weinig, Type: Unimat 17, Planing widht mm: 180, Planing hight mm: 120, Number of spindles: 7, Elektronische Achsverstellung: no, Work piece width min-max mm: 180, Min.-max. workpiece length in mm: 350, Wellendrehzahl: 6000, Spindles: 6, Spindle diameter in mm: ca 40, Spindle arrangement: U / R / L /R / O / U / Uni, 1.Bottom spindle kW: 4, 2nd spindle on right kW: 4, 3.Left spindle kW: 4, 4th spindle on right kW: 4, 5.Top spindle kW: 4, 6th spindle at bottom kW: 4, 7th universal on left kW: 4,

Deck oven Electric oven Miwe Condo Type: CO 4.0608 -2D FP Control Bottom heat and top heat adjustable 4 baking shelves 600 x 800 all stoves with steam bottom with 5 algae Extractor hood at the top with swath decodensor Mobile base frame with brake Stove height 125 mm Connection 400V, 19,8kW, 2 x 32A-CEE plugs Water connection 3/4 inch, water drain DN 40 Dimensions: 900 x 1350 x 2120 mm, WxDxH Used oven cleaned with 6 months warranty More top bakery machines in stock!

Leadermac 823 Hypermac four-sided planer Working width 230mm Working height 160mm Number of spindles: 8 Spindle system: 1.Bottom 7.5kw 2.Right 7.5kw 3.Left7.5kw 4.Top7.5kw 5.Right 7.5kw 6.Left7.5kw 7.Top11kw 8.Bottom 11kw Feed speed 50m/min Pulling rollers in the table Upper and lower spindles with supports Pneumatic clamps

SCM Superset XL four-sided planer Working width 230mm Working height 130mm Number of spindles: 7 Spindle system Bottom 9kw Rights 9kw Left 9kw Mountain 9kw Bottom 9kw Rights 7.2kw Left 7.2kw Spindles adjustable in two planes Spindle diameter 40mm Feed speed adjustable on the inverter Drive on cardan shafts Pneumatic clamps

• Mixing tank for suspensions • Useful capacity approx. 500 l • 1 agitator blade in the centre of the base with rubber wipers • Stirring blade speed fixed 18/min • 2 fixed guide rods • 1 drain at the side in the bottom Ø 200 mm with swivelling valve • Bottom flat slightly inclined • Drive 380V/50Hz, 3,6kW • Standing on 4 feet

• Useful capacity 2245 l • Material 1.4404 • Operating temperature 30°C • Manhole cover top Ø 500 mm • Concave tank bottom • Drain at bottom centre NW 30 • Drain at the side NW 50 • Formerly storage tank for PW plant

Hand basin, washbasin, weld-in basin, weld-in swivel basin -Stainless steel sink -Internal dimensions: 600 x 450 mm -Depth: 300mm -Edge: 18mm -Number: 17x available -Bottom left hole: 8/bottom right hole: 9 -Price per piece -Dimensions: 640/500/H300 mm -Weight: 5.1kg

Material: Stainless steel Diameter 1320 x depth 3500 Circuit in double insulated jacket (Diameter 15) Drain D.35 Door 300x450 (position: bottom of shell) 3 inlets on dome Diameter 30 2 Outlets on shell for level control. Conical bottom and dome 3 feet Total height : 4100

Bending tool, die, bottom knife, bottom tool, prism tool -Tool: for press brake, 5 pieces -Dimensions: see the drawing in the photos -Length: 1745 mm / each 1 x 615/570/335/120/105 mm -Width/Height: 80mm -Weight: 65.7 kg

AlTech Labeler Top and Bottom incl. Sato Printer Top and Bottom The machine is in stock and is immediately available.

400 liter STIRRER, used, overhauled, in stainless steel, tank with conical bottom and bridge for motorisation, from following characteristics:stirrer with shaft and impeller notched dia. 200mm. bottom – engine Kw. 4 rounds 1500; exhaust cone cut with jacket and welding of TC 2 1⁄2” fitting half-cover remaking and dust seal gasket. New electrical panel equipped with a 5.5kw inverter so that the engine speed can be varied.

Planing and molding machine Weinig Unimat 30 EL for four-sided planing and profiling of large pieces of wood Loading table (homemade) and including planing heads., spindles: 5, working width: 300 mm, working height: 160 mm, spindle 1: Bottom / counter bearing, spindle 2: Right, spindle 3: Left, spindle 4: Top/counter bearing, spindle 5: Bottom / counter bearing, Tools: Included, Soundproofing: Kashwig

Stackable stainless steel tank Manhole Event Side tank bottom drain with 72mm diameter butterfly valve 17 in stock in April 2023, Volume: 1000 Liters, Tank bottom outlet: Diameter 72mm , Event: 72 mm, Mobile tank: No , Dimensions (mm): 1200x1200 H1720mm, Weight (kg): 188kg

Stackable tanks 316L stainless steel Manhole Event 64 in stock as of April 2023 Side tank bottom drain with 72mm diameter butterfly valve, Volume: 1000 Liters, Tank bottom outlet: 72 mm, Event: 73 mm, Mobile tank: No, Double envelope: No, Dimensions (mm): 1200x1200 H1690 mm, Weight (kg): 188-210 kg

Manufacturer: Herma Model: Labeler 652C Herma Type: 652C S Output: Up to 250 pieces/minute Conveyor belt width: 250 mm Product Dimensions: Top & Bottom Labeling: 30-300 x 10-250 x 38-350 mm (LxWxH) Label roll diameter: Max. 300 mm Core diameter: 76 mm Label dimensions: Top labeling: 15 - 160 x 30 - 300 mm (W x L) • Bottom labeling: 15 - 120 x 30 - 300 mm (W x L) Year of construction: 2021 Almost mint condition, hardly used. Machine design: Modular design for quick adaptations and changes Components: conveyor belt, side guides for products, labeller, control panel CE Mark: Yes Condition: Like new

MOBERT ROLLER 110 6M,, for pre-cut open top bags in a roll, packed in rolls with paper tape, for 1 - 2 - 3 lanes, different bottom shapes available, 2 lanes roll width 420 mm, 3 lanes roll width 300 mm, min roll width 150 mm, Max roll diameter 110 mm, minimum bag length 250 mm, max bag length 1.500 mm, Construction year 1997, Mother reel driven unwinder, max width 1.700 mm, slit and seal unit 1.700 mm. n.2 knives for 3 lanes, gusseting unit 1.600 mm 3 lanes, 2-lanes star-bottom folder, 2-lanes folder for C fold, n.2 automatic taping units, n.1 tension stabilizer for electric cabinet, excellent working conditions

Tipping container, chip hopper, tipping body, mobile PAGUS Content: approx. 0.4 m3 internal dimensions: Length ( top / middle / bottom ): 880 / 1200 / 580 mm width: 625 mm depth: 710 mm fill edge height ( above road ): 730 mm fill edge height ( above container bottom ): 350 mm Material: steel, painted 2x fixed castor, 2x swivel castor forklift compatible, fork spacing: 450 mm ( center / center ) used, tested ! Dimensions: 1320 x 680 x 1100 mm

Lemo Intermat V. 600 ST-N-400 , Year 1999 Machine for the production of wicketer bags HD-PE, LD-PE, LLD-PE, PP Capacity max. 210 bags/minute. Unwinder Max. width = 1350 mm (with brake and side edge control) Max. diameter = 1200mm, Sleeve = 6" Longitudinal separating unit (can also be used for perforation) Folding triangle to form a half tube. Folding unit for bottom gusset 2 punching units bridge with tools 1 punching unit for valves 1 separating seam welding device Pen stacker Data: Bag length 155 -520 mm incl. flap flap = 40 -60 mm, Bottom gusset =27-60 mm Bag width = 70 to 400 mm Test run is possible. The machine is well maintained.

WELEX SHEET CO-EXTRUSION LINE, running with ABS and PS, extruder 115 mm screw diam. 30 L/D, degassing system, 225 kw drive, 190 rpm screw speed, hydraulic screenchanger, hydraulic pack and accumulator, Maag gear pump 56/56, water cooled, gravimetrical blenders, Motan dehumidifying dryers, + Covema co-extruder with 60 mm screw diam. 24 L/D, 175 rpm, electrically heated, air cooled barrel, 18,5 kw drive, 1.650 mm EDI R75 ultraflex die., Flex range on the top lip of up to 1.9 mm. Mounted gap is ca 2.6 mm., Bottom lip is removable and has slotted bolt holes, adjustable to achieve a wider thickness range., One spare bottom lip available - thickness to be checked, 1650 x 400 mm Ø rolls, Static mixer, ABA co ex block with plate type inserts, 1.650 mm 3 roll polishing stack model 18x65 LHSL. 450 mm diameter rolls. Chain driven through selector gearbox. circa 5 hp dc motor. Upstack configuration ...

Key data: 2 mm, 50 mm

Edge banding machine Edge banding machine OTT Type: 20S Edge banding with hot melt glue glue basin Plastic edges up to 2 mm Solid wood edging up to 20 mm Flush milling units at the top and bottom Profile milling units at the top and bottom Edge grinding unit rollable The machine originates from the age-related abandonment of a small construction and cabinetmaking workshop and is available now. Dismantling and loading can be organized by us. Settlement by appointment. Buyers can also pick up and test the machine themselves on site. Condition see pictures, or please refer to the item description. Parts can also be picked up by yourself. All measurements are approximate. All information to the best of our knowledge but without warranty. Subject to prior sale. The items can be picked up by yourself or shipped at the expense of the buyer. Shipping c ...