bottle wash used for sale

7 pallets with new glass bottles 0.7 l, white glass with screw cap, including the pallet boxes Auction-ID: A7-45677-181

Bottling line with a capacity of 30,000 bottles per hour. It uses 0.33 litre Vichy, 0.33 litre Euro, 0.35 litre lemonade and 0.5 litre NRW non-returnable and returnable bottles. It is also possible to pack 6-carton bottle carriers for 0.5 litre bottles in bottle crates. The removal of old cartons and the insertion of new cartons from/into the quill boxes is done by hand. The bottles are inserted by the packer. The system consists of the following machines / components: - Depalletising and palletising system Manufacturer: Radenska & Steinle - Foreign crate detection and sorting system Manufacturer: Syscona - Unpacker Manufacturer: SZA Federspiel - New glass lifter Manufacturer: Steinle Fördertechnik - Uncapper Manufacturer: Rink - Bottle washing machine Manufacturer: Krones - Crate washer - Bottle inspector Manufacturer: Krones - Beer preheater Manufacturer: Fischer - Bottle filler Manuf ...

A carousel for filling glass bottles and capping them with crown caps., Additional title: 50,000 bo/h, crown caps, Capacity: 50000 bph, Formats: 0,33 l LongNeck bottles, 0,5 l NRW bottles; crown caps, Running direction: rigth -> left, Operation / Control: Siemens S5, Base construction: filling level filler with return air tube, Features: 120 filling points, 24 sealing points, double pre-evacuation, high-pressure injection

Glass bottle filling system for hot filling smoothies. Consisting of the following components: - Unpacking table - bottle rinser - Vacuum filler (with 24 filling valves, Nagema, 1984, type ‘VW 24/1’) - Flash pasteuriser (KZE) - Pressure tank - Capper (Marchesini, type ML667) - Lid sorter - Tunnel cooler - Blower - Lid inspection (BBull CIS) - Labeller (Anker, 1999, type ‘Roland 10/4’) - Packing table - Conveyors - Control panel - Cooling tower - Steam boiler - Water softening (Lohbeck GmbH, Softtrol CD double system), Additional title: hot filling, with pasteurisation, Capacity: 5000 bo/h, Formats: 0.25 liter bottles, twist off caps, Features: Unpacking table, rinser, vacuum filler, flash pasteuriser, pressure tank, capper, lid sorter, tunnel cooler, lid blow-off, lid inspection, labeller, packing table, conveyors, control panel, cooling tower, steam boiler

Filling line for 0.33 L disposable Euro bottles The bottles are placed by hand on a bottle loading table. From there they run on a conveyor belt to the labeling machine, where an all-round adhesive label is applied. Then they go to the combined rinser/filler/sealer, and downstream bottle collection table, from which the bottles are manually packed into crates or other containers., Additional title: Glass bottle filling, Nominal capacity approx.: 3750 bottles/h, Formats: 0.33 L disposable Euro- and Vichy-bottles, Running direction: left -> right, Operation / Control: Filler: Siemens ET 200 SP, Touch Panel, Position: free standing, Features: Bottle loading table, labeling machine from Intrex (model: Intrex Set with all-round adhesive labeling), bottle rinser/filler from Leibinger GmbH (rinser model: 12 BG, filler model: Multima L (= long-tube filler) control: Siemens S7, built in 2019), Bo ...

Disposable PET filling line consisting of the following components: - Crate ejector (crate emptier, Gera GmbH, 20 ejectors in a 4x5 arrangement) for 0.5-litre bottles - Crate ejector for 1.0-litre bottles (Gera, 2003) - Case washer with cleaning nozzles - Stretch blow moulding machine (SIG, type Blomax 18, built in 2003, with 18 cavities) - Air conveyor for PET bottles (Convair, 2001) - Suction system (2003) - Air transport (KHS Innoline, 2003) - Premix system (Procomac Starmix CM, built in 2001, 250 hl/h) consisting of water degassing, mixer and carbonation with a total of 4 containers - Velcorindo dosing (dmt, Burdomat II G) - Cap feeding and cap conveyor system (Procomac, 2005) - PET bottle rinser, filler and capper (Procomac, 2001) - Labelling machine (P.E. Futura, 2001) for hot glue labelling of wrap-around labels, in block with laser dating (Videojet, 2017, with suction) and label  ...

Inspection machine for detecting damage and contamination in glass bottles, as well as for identifying foreign bottles., Nominal capacity of filler: 60000 b/h, Power: 10,7 kW, Water: max. 4 bar, consumption: 1,3 l/min, Compressed air: 6 bar, consumption: 2,5 bar, 30 N/m³/h, Length: approx. 2.995 mm, Width: approx. 2.370 mm, Height: approx. 2.600 mm, Weight: 5200 kg, Formats: 0,33 l LongNeck-, 0,5 l NRW-bottles, bottle height: min. 150 mm/ max. 350 mm, diameter: 71 mm, Machine partitioning: 94 mm, Operation / Control: Siemens S5, Features: inspections: bottom inspection, mouth inspection, sidewall inspection, caustic detection High frequency, residual fluid detection Infrared, evaluation for detection and separation of bottles with heavy abrasion, height detection

Glass bottle filler and capper for filling beer as well as CO2-containing and non-CO2-containing soft drinks and capping with crown caps. Capacity: approx. 14000 bph. Fomat parts for Euro, NRW, Longneck and Vichy bottles., Additional title: 42 filling points, Capacity: 14000 bottles/h, Number of filling valves: 42, Voltage: 220/380 V, Length: 3,10 m, Width: 2,25 m, Height: 3,30 m, Formats: Euro, NRW, Longneck und Vichy type bottles with crown caps, Running direction: left -> right, Operation / Control: Siemens S5

Carousel for sealing swing-top bottles., Capacity: 18000 bottles/h, Features: Height adjustment, control device for closing pressure, mechanical / pneumatic testing of shackle tension, high-pressure injection device, rinsing and swelling device

Additional title: crate packer, Capacity for plastic crates: 500 cycles/h , Power: 11 kW active power/ 15 kVA apparent power, Voltage: 230/400 V ± 5 %, Frequency: 50 Hz ± 2 %, Length: 4170 mm, Width: 2550 mm, Height: 2650 mm, Weight: 4300 kg, Formats: Max. height: product: 360 mmm, plastic crate: 380 mm, cardbord box: 500 mm, Features: 2 heads à 20/24 bottles, construction with T-flange table quick hitch, only work with glas bottles, incl. filled crate inspector, Krones Checkmat

Inspection system for detecting damaged and soiled bottles., Additional title: Residual liquid, bottom, mouth, sidewall control, Capacity: 32000 bottles/h, Power: 3,6 kW, Voltage: 400 V, Frequency: 50/60 Hz, Compressed air: min. 6 - max. 10 bar, Length: 2,5 m, Width: 1 m, Height: 2,5 m, Weight: 1700 kg, Formats: Longneck-, Steini-, Vichy- 0,33 l bottles / 0,5 Longneck-, NRW- 0,5 l bottles, Running direction: right-left, Operation / Control: Heuft, Features: residual liquid, bottom, body, mouth, side wall

Packaging machine for packing PET bottles in plastic crates. The machine is set up in a T-layout. The packing curve and cycle times are freely programmable. The machine packs 0.5 l and 1.0 l PET bottles in crates containing 20 or 9 bottles respectively. Retrofitting to other formats is possible., Additional title: Gripper head packer for packing PET bottles into beverage crates, Max. capacity: 24000 bo/h referring to 0.5 l bottles, Cycle time: 400 cycles/h, Number of packing heads 0.5 l: 3 pcs., Number of packing heads 1.0 l: 5 pcs., Power: 13,7 kVA, Voltage: 400 V, Frequency: 50 Hz, Compressed air: 4.5 m³/h, 6 bar, 3/8 connection, Weight: 2900 kg, Formats: 0.5 l and 1.0 l PET bottles; 20-bottle crates for 0.5 l (in a 4x5 arrangement); 9-bottle crates for 1.0 l (in a 3x3 arrangement), Running direction: Longitudinal run for 20-litre crates; transverse run for 9-litre crates, Operation / ...

New bottle depalletiser on two levels. This new bottle skimming machine is a depalletiser with lifting frame in single-mast design. The mast is fitted with guide rails to support the vertically moving, roller-guided frame. The transfer device is attached to the lifting frame. The bottles are discharged in the upper area. The infeed and outfeed of the pallet transport is located under the transfer device. Our team at VBW Asset Trade will be happy to answer your questions. Send us an inquiry or simply give us a call!, Additional title: Depalletiser with lifting frame, Capacity: 140 layer/h, Power: 8,75 kW, Voltage: 230/400 Volt, Frequency: 50 Hz, Compressed air: 5,0 bar; 8,0 Nm³/h, Length: 4020 mm, Width: 3400 mm, Height: 5425 mm, Weight: 3800 kg, Formats: europalett (1200 x 800 x 140 mm), Operation / Control: control box / Siemens S7, Material: Painted mild steel, Position: free standing ...

Bottle level control, Current: up to 1,5 kW/power supply, Voltage: 220/110 V, Frequency: 50/60 Hz, Length: 420 mm, Width: 350 mm, Height: 720 mm

Bottle washing machine Nagema GM Arcade Year of construction 1993 Output 23,000 bph, Additional title: Single-ended machine, Capacity: 21000 bo/h, Bottles each row: 16 bo/row, Length: 8,64 m, Width: 4,47 m, Height: 1,92 m, Weight: 17900 kg, Formats: 0,5 l NRW-Bottle, Features: Heated by steam; smoke suction; insertion sieves; caustic settling tank , Periphery: S5 controll (HMI Lauer)

miho fill level detector for detecting underfilled or overfilled bottles, as well as for cap detection. The device works with a high-frequency alternating voltage., Additional title: Fill level inspection system, Capacity: 24000 b/h, Operation / Control: at control box, Material: Painted steel / stainless steel, Position: free-standing / mounted on bottle transport, Base construction: Housing with evaluation electronics with tubular frame on spherical feet, Features: Measuring device, control electronics, bottle ejector

Full crate inspection system for PETCYCLE crates, with 20x0.5 l, 9x1.0 l, 6x1,0 l and 6x1.5 l bottles., Additional title: Full crate inspection system, Capacity: 4000 crates/h, Formats: 20 x 0,5 l, 9 x 1,0 l, 6 x 1,0 l and 6 x 1,5 l-PET-bottles, Material: Stainless steel housing, Position: free standing, Base construction: Box on tubular feet, Features: Conveyor belt, 1 housing with measuring electronics, 1 housing with electronics/operator touch

Glass bottle filling line for beer and non-alcoholic beverages for filling 9000 bph. Includes: - De-capper: JOHA type Smaragt, built in 1990, with one unscrewing head - Bottle unpacker: JOHA type E100, built in 1978, with one packing head - Crate washer: JOHA type KA2N, built in 1983 - Bottle washer Pirzer, built in 1983, with 19 bottle racks per row - Empty bottle inspector: Inex type Optiscan 4s - Bottle filler and capper: Krones type 28/7, built in 1975, with 28 filling valves and 7 capping stations - Capper: Adelski, with 4 capping stations - Labelling machine: Pirzer, built in 1979, for belly and neck labels, with 8 labelling stations - Bottle packer: JOHA type A400 Q, built in 1977, with one packing head, Additional title: Years of manufacture: 1975 - 1990, Capacity: 9000 bottles/h, Formats: 0,5 l Euro bottle; crown cap; screw cap; 20x0,5 l beverage crate, Features: De-capper; de-c ...

Crushes bottles by pressing them. - high crushing capacity - high volume reduction - accident-proof (splinter-proof) - low noise [85/87 dB(Ai)] - low wear rate - compact design (minimum space requirement), Crushing capacity: 6000 b/h, Current: 6,5 A, Voltage: 380 V, Frequency: 50 Hz, Length: 15220 mm, Width: 1300 mm, Height: 22600 mm, Weight: 700 kg, Base construction: on dome feet, Features: Fragment tub, noise protection box, slot for manual disposal of single bottles

This bottle crusher from HEIN Lärmschutztechnik GmbH efficiently crushes bottles by pressing and offers high crushing performance and significant volume reduction. Its compact and robust design ensures low wear, quiet operation (85/87 dB(Ai)), and splinter protection, making it ideal for busy production environments. The system has a manual capacity of 2,400 bottles per hour and operates at 380 V / 50 Hz, 6.5 A. It stands on ball feet and has a fragment container and a noise protection box, while its compact dimensions (1.45 m × 1.20 m × 1.85 m) mean it requires little space. The machine weighs 900 kg and offers stability and durability in daily operation. At a glance: Crushes bottles by pressing them. - high crushing capacity - high volume reduction - accident-proof (splinter-proof) - low noise [85/87 dB(Ai)] - low wear rate - compact design (minimum space requirement) Our team at VB ...

Krones Prontomatic labelling machine, type 12-6/6-4, For labelling crown-capped bottles in 0.5-litre and 0.33-litre sizes, as well as swing-top bottles in 0.5-litre and 0.58-litre sizes. Disposable crown-capped bottles in 0.33-litre sizes can also be labelled., Capacity: 13500 bph Swing-top label, Voltage: 400 V, Frequency: 50 Hz, Length: 2450 mm, Width: 2000 mm, Height: 2500 mm, Formats: Crown cap returnables: 0,33l, 0,5l NRW; crown cap one-way: 0,33l; swing-top: 0,5l, 0,58l, Machine partitioning: 180mm, Running direction: Right - left, Operation / Control: Simatic S7-300

The VP 800 bottle packer and depacker is designed for automatic operation within the beverage industry., Additional title: Linear set packer, Capacity: 600 crates/h 10 strokes/min., Power: 5,5 kW, Current: 10 A, Voltage: 400 V, Frequency: 50 Hz, Length: 3000 mm, Width: 1540 mm, Height: 2600 mm, Weight: 1100 kg, Formats: 24 x 0,33 L Vichy, Running direction: Right-left, Operation / Control: Simatic S7-99, Base construction: Frame, height-adjustable, Features: approx. 3 m bottle outlet; approx. 5,5 m crate inlet; approx. 4,5 m crate outlet

Returnable glass bottle filling line, Additional title: Years of manufacture: 1991–1995, Capacity: 50000 b/h, Formats: 0,33 l LongNeck-, 0,5 l NRW-bottles, neck-/breast-/body-/back-labels, Euro pallets, Operation / Control: Siemens S5, Features: decrowner, decrater, bottle washing machine, empty bottle inspector, bottle filler and closurer, filled height inspection, labelling machine, dating, label inspection, crown cork inspection, crater, filled crate inspection, bottle and crate conveyors

PET bottle air conveyor over 2 floors, used for 0.5 l, 1.0 l and 1.5 l bottles. Length approx. 50 m. Our team at VBW Asset Trade will be happy to answer your questions. Send us an inquiry or simply give us a call!, Additional title: PET bottle conveyor system, Capacity: 24000 b/h, Formats: 0,5, 1,0 l und 1,5 l PET-bottles, Material: mainly stainless steel, Position: free-standing on the floor / suspended from the ceiling, Features: Bottle transport channel with bottle guides, with 2 x 360° and additional curves, with a 15° incline and horizontal run, 5 frequency-controlled blower motors

Bottle ejector for removing empty PET bottles from PETCYCLE crates, with attached upward turner., Additional title: PET bottle ejection system, Capacity: 4000 crates/h, Power: 2,8 kW, Current: 8 A, Voltage: 400 V, Frequency: 50 Hz, Compressed air: 6 bar, 1 m³/h, Length: 3000 mm, Width: 1910 mm, Height: 3830 mm, Weight: 2500 kg, Formats: PETCYCLE 20 x 0,5 l, 9 x 1,0 l, 6 x 1,0 l, 6 x 1,5 l, Operation / Control: Simatic S7-300, Material: stainless steel, Position: free standing, Base construction: Stainless steel square tube construction on spherical feet, Features: Infeed or upward turner with protective grid, crate transport, crate guide, bottle ejector, switch cabinet, protective housing with plexiglass panes, staircase and operating platform with railing

Conveyor belts for PET bottles, with 1-lane hinged belt chain and 6 lanes. Capacity: 24,000 bottles/hour, Additional title: Free bottle conveyors, Capacity: 24000 b/h, Free bottle transport approx.: 30 m, 90° bottle transport curves: 1 piece 1-chain conveyor, 180° bottle transport curve: 1 piece 6-chain conveyor, Formats: PET-bottles in 0,5 l, 1,0 l, 1,5 l, Operation / Control: controlbox / Siemens S7-300, Material: mainly stainless steel, Position: free-standing, Features: Conveyor frames, deflection stations, drives, frequency controls, electrical switchgear, automatic belt lubrication

Overview  This empty bottle inspector (EBI) was manufactured in 2009 by Germany Krones. The machine is designed for the inspection of empty glass and PET bottles prior to filling in beverage production lines. It was previously used in production and has been professionally dismantled and stored in a warehouse. The machine is available immediately from warehouse. Technical data Capacity: Not provided Formats: 0.75 L Gourmet bottle 0.25 L Gourmet bottle 0.25 L Vichy bottle Application: Inspection of empty bottles prior to filling Configuration: Multiple inspection modules including base inspection, sealing surface inspection, thread inspection, mouth/finish inspection, sidewall inspection, residual liquid detection, foreign container detection, bottle height control (±2.5 mm tolerance) Inspection systems: Base inspection (camera) Sealing surface inspection Thread inspection (conical opti ...

Overview This case packer was manufactured in 2020 by German company Mühlbauer. The machine is in excellent condition, has been well maintained, and is immediately available for sale due to discontinuation of use. It is ready for immediate operation and suited for various bottle and crate formats. Technical data  Capacity: 8,000 bottles/hour Formats: 0.50 l Euro bottle / 20-bottle Euro crate 0.50 l Euro bottle / 20-bottle module crate 0.33 l Gourmet bottle / 20-bottle Euro crate 0.33 l Longneck bottle / 24-bottle module crate 0.33 l Vichy bottle / 24-bottle module crate Machine condition: Very well maintained, ready to use Scope of Delivery  Bottle packer Mühlbauer Satelite EP-0400-T

Used Labeler Cavagnino & Gatti CG-84-FR 3-8 3000 bph Year 2001 For flasks of 150 mm in diameter These Cavagnino & Gatti rotary wet glue labelers are capable of production speeds from 4,000 to 9,000 bottles per hour with applications throughout the wine, beverage, food, chemical and household industries. The CG84CR-DR-FR series of machines are the result of an innovative design that has allowed for a reduction of components of the labeling unit which has resulted in important advantages in terms of economy, ease-of-use, changeover time and maintenance. This series of C&G machines are available with either the standard bottle platform motion by double profile cam in an oil bath or by programmable servo-platforms MP. These labelers can be equipped with various optical and/or mechanical spotting systems for the automatic alignment of printed capsules, glass cartouches, side and bottom notchl ...

Technical Specifications & Performance Data The KHS Innofill-ER VF 143/20 is a high-speed used isobaric filling monoblock designed for premium glass bottle applications in beverage production. Engineered for reliability in industrial packaging environments, it offers consistent performance for soft drinks, sparkling water, and still water on a used bottling line. Manufacturer: KHS Model: Innofill-ER VF 143/20 Category: Filling Monoblock (Isobaric) Year of manufacture: 1994 Rated speed: up to 45,000 bottles per hour (format- and product-dependent) Filler configuration: 143 isobaric filling valves (rotary) Capper: 20-head Alcoa ROPP, 20 mm (rotary) Container types: Glass bottles Bottle formats: 0.70 L, 0.75 L Product types: Soft drinks, water (sparkling), water (still) Electrical: 50 Hz Condition: In storage Documentation & safety: Manuals available; safety features included Advanced Autom ...

Technical Specifications & Performance Data The FINPAC SHM B2 is a second hand sleeve labeling solution engineered for high-output beverage production and industrial packaging environments. Optimized for PET bottles, it delivers stable application of shrink sleeves and consistent shrink quality via an electric tunnel, making it a strong fit for a used bottling line seeking reliable, repeatable labeling performance. Manufacturer / Model: FINPAC SHM B2 Year: 2007 Category: Labeling Machine (sleeve applicator with electric shrink tunnel) Nominal speed: up to 9,000 bottles/hour Container types: PET (primary configuration) Bottle formats set up: 0.06 L and 0.50 L Typical bottle range: diameter 55–87 mm; height 120–240 mm Sleeve film thickness: 45–50 µm Number of stations: 1 Labeling method: Sleeve application (method code 8) Label placement: Full-body sleeve capability (plac ...

Technical Specifications & Performance Data Used Bottle Labeler Krones VARIOMATIC 7000 bph suitable for integration in a used bottling line for beverage production and other industrial packaging applications. This second hand rotary labeler combines cold-glue and self-adhesive technologies to cover a wide range of products and label materials. Manufacturer / Model: Krones VARIOMATIC Year of manufacture: 1998 Nominal speed: up to 7,000 bottles per hour (bph) Container type: Glass bottles Bottle format: 0.75 L (typical wine and sparkling formats) Labeling technologies: 4 stations total – 3 cold-glue stations + 1 self-adhesive (PSL) station No. of plates / bottle platforms: 4 Label materials: Paper (cold glue) and pressure-sensitive labels Optical centering system: Not included (mechanical centering per OEM configuration) Electrical: 220 V, 20 A, three-phase Condition: In storage Docum ...

Technical Specifications & Performance Data The STS S2T6/R (year 2009) is a rotary bottle labeler engineered for glass containers and ideal for integration into a used bottling line dedicated to beverage production and industrial packaging. With a compact rotary carousel, it supports multi-station labeling for high-quality presentation across a wide variety of beverages such as water, juice, beer, and wine. Manufacturer / Model: STS S2T6/R Year of manufacture: 2009 Machine type: Rotary labeling machine (second hand) Number of plates: 6 Rotation direction: Clockwise Number of stations: 4 (configurable for cold glue, hot-melt, and self-adhesive roll-fed, depending on installed tooling) Label application: Capable of multiple labels per container, including front/back and wrap-around configurations Container material: Glass (configured) Electrical: 380 V, 50 Hz, three-phase Approximate weigh ...

Technical Specifications & Performance Data The Eticap AR 4T 2S is a rotary pressure‑sensitive labeling machine designed for precise application on glass bottles within a used bottling line. This second hand unit offers reliable performance for beverage production environments seeking consistent label placement at moderate speeds. Manufacturer / Model: Eticap AR 4T 2S (4 labeling heads) Year of manufacture: 1997 Production speed: up to 2,500 bph (bottles per hour) Container types: Glass bottles (optimized for cylindrical and slightly conical formats) Bottle formats handled: 0.06 L and 0.75 L Labeling technology: Pressure‑sensitive (self‑adhesive) Number of labeling stations: 2 Rotary plates: 4 cam‑driven plates with mechanical orientation (Maltese‑cross/Geneva mechanism) Rotation direction: Clockwise Head adjustment: Manual fine adjustment for label heads Optical ...

Technical Specifications & Performance Data The Kosme Kosmac 6r1s3s ADH is a rotary self-adhesive labeler with additional glue application for seal/tax band, designed for dependable operation in beverage production environments. Ideal for integration into a used bottling line, it offers consistent labeling quality for glass bottles in still and sparkling applications. Manufacturer / Model: Kosme – Kosmac 6r1s3s ADH Year of manufacture: 2000 Production speed: up to 3,000 bottles per hour (format-dependent) Container types: Glass (configured) Bottle formats: 0.375 L and 0.75 L Labeling configuration: 3 self-adhesive groups (front/back/neck) + glue station for state/tax seal Number of stations: 4 total Number of plates: 6-plate rotary carousel Rotation direction: Clockwise Electrical supply: 380 V, 50 Hz, 3.5 kW, 3-phase Approximate weight: 2,000 kg Advanced Automation & Control System ...

Technical Specifications & Performance Data The SACMI OPERA RA 720 8T S3 is a rotary labeling machine engineered for consistent, high-quality application on glass bottles within demanding beverage production environments. As a second hand solution from a leading manufacturer, it offers reliable performance and ease of integration into a used bottling line. Manufacturer / Model: Sacmi OPERA RA 720 8T S3 Year: 2005 Category: Labeling Machine (rotary) Operational condition: READY FOR OPERATION Production speed: up to 6,000 bottles/hour Container types: Glass Bottle formats: 0.06 L and 0.75 L Number of plates: 8-position rotary carousel Number of labeling stations: 3 (multi-label capability) Label positions: Supports body/front, back, and neck applications Optical centering system: Integrated high-precision sensor-based centering Head adjustment: Fine-adjustable labeling heads for precise al ...

Complete Bottling Line for Water (PET 1.5L) – Overview This used PET bottling line is configured for still water in 1.5-liter bottles, delivering a performance range of approximately 12,000 to 16,000 bottles per hour. Designed for industrial packaging and beverage production, it combines proven second hand equipment from recognized manufacturers to offer a reliable, efficient solution for a used bottling line. The configuration includes preform handling, blow molding, filling, capping support, labeling, shrink wrapping, handle application, palletizing, and conveyors, enabling a seamless end-to-end packaging process. Key components include a preform tipper and elevator by Sameto Technifil, a Siedel SBO10 blow molder, an Alsim Asmojet filler, an Arol cap feeder, a Kronos Contiroll labeling machine, an ACMI Fenix 165 shrink wrapper, and a Smipack HA50 handle applicator. This versatile ...

Used Wine Bottling Line For Glass Bottles of 3L – 2000 BPH Technical features: 150 mm chain Production: 2000 carboys per hour Voltage: 380 Low voltage: 24v Frequency: 50Hz Working direction: right to the left Worktop height: 1240mm Carboy base format diameter: 51, 179 × 340 This line includes big italian brands, like Bardi, Bertolaso and Cavagnino&Gatti. The bottling line ends with labelling equipment, so different packing systems can be attached as needed. This can be standard cardboard boxes or tray plus film or wrap-around system closure. The two bottle sizes worked are 1,5L and 3 L but if needed this can be adapted for 0,75 L too. With additional payment it can be upgraded to create equipment for the inlet and outlet, the 0,75 L bottle size. It has a satin cork corker and aluminium screw cap capper, and an 8 head labeller with two adhesive stations. It performs gravity filli ...

Used Bottling Line KRONES for Glass Bottles up to 20000 bph Introduction to the Bottling Line KRONES Initially, the used KRONES bottling line for glass bottles is highly sought after in industrial settings due to its reliability and efficiency. Comprising a range of top-tier components, the Complete Bottling Line KRONES ensures seamless performance, effectively meeting the stringent demands of high-volume production. Main Components Firstly, the KRONES K-131-669 filling monoblock, manufactured in 2016, stands as the centerpiece of the Complete Bottling Line KRONES. Capable of handling a remarkable 20,000 bottles per hour, it is complemented by the 1998 KRONES 472-072 depalletizer and the 2000 Gronemeyer RINSER 8983-400-4. Consequently, this collective setup facilitates a smooth and uninterrupted workflow from bottle unloading to the filling process in the Complete Bottling Line KRONES. Q ...

Used Filling Line For Edible Oil In PET 1L Bottles Capacity: 6.000 bph x 1,0 L Blow Molding Machine KOSME KSB 3000 – 2001. – 2 pcs x 3.900 bph Box for preforms with transport to the blower Compressor for cooling moulds MTA S.R.L. – 2000 KOSME bottle air conveyor – 1999 AISI 304 stainless steel Electrical control cabinet with PLC Built-in air filters It transports bottles from blower to filler Filling Monoblock Filler and capper – ICS-Slovenia – 1995 – 6.000 L/h Labelling Machine Labeller ICS – 1995 – paper labels, cold glue Conveyor belts ICS – 1995 Packer in transport boxes 3×5 bottles – ICS – 1995 Shrink Wrapper Shrink wrapper SMIPACK-packer in foil 2×5 bottles – 2013 Pallet Wrapper Pallet wrapper ZLATOROG-Slovenia – 1999 Compressor KAESER low and high pressure compressors – 2000 Refrigeration dryer  ...

Used Bottle Rinser PROCOMAC Gripstar up to 6000 bph This Used Rinser not only delivers high efficiency but also ensures excellent performance for bottle rinsing. Procomac manufactured this system in 1999, and designed it to operate at a maximum speed of 6000 bottles per hour (BPH). As a result, this setup guarantees optimal performance in production lines. The rinser handles bottle formats ranging from 0.20 to 1.5 liters, providing versatility and adaptability in different production settings. Furthermore, its robust construction adds to its overall efficiency. Technical Features of the Rinsing Machine PROCOMAC Gripstar The Gripstar rinser features 32 grippers that operate in a clockwise rotation. Consequently, this design stabilizes the bottles during the rinsing process and reduces the risk of damage or malfunction. In addition, the system incorporates fixed nozzles, which simplify mai ...

Used Rinsing Machine Poggio for glass bottles 6000 bph Structural features of the used rinsing machine Poggio The Used Rinsing Machine Poggio for glass bottles 6000 bph operates with 24 grippers specifically designed to process 0.75-liter glass bottles. First of all, the machine follows a clockwise rotation and performs a single rinsing phase. Additionally, the rotating support interfaces directly with the grippers, which securely hold each bottle to ensure accurate positioning and tilting. As a result, the system optimizes the efficiency of the rinsing cycle. Moreover, engineers built the stainless steel frame to endure intensive production environments, while protective enclosures enhance safety in humid bottling areas. Treatment system and operating principles The machine performs a single rinsing cycle using only water, without relying on any chemical agents. Notably, the Used Rinsin ...

Used Bottle Inspector GF HAWK 24 000 BPH Characteristics of the machine and of the products handled It is made through: – traditional commands (push button panel) – PC hardware (video, keyboard and mouse) Traditional commands In order to allow quick and safe intervention by the operator, the controls have been provided of a traditional type; for example: – machine stop – machine running – etc. PC hardware The machine is equipped with the main hardware elements of the PC, such as: – video – keyboard – mouse Ambient temperature In order not to jeopardize the safety and optimal operation of the machine, follow the values ​​indicated: – storage temperature: from -10 to 60 ° C – ambient operating temperature from 10 to 45 ° C – temperature inside panels: Power electrical cabinet: – electrical power cabinet ...

Complete Bottling Line for 187 ml glass Beverage Containers The complete bottling line for 187 ml plastic beverage containers represents a cutting-edge solution in the field of automated bottling. Designed for wine products, it is capable of operating at an impressive speed of up to 250 bottles per minute. This high production capacity is made possible by integrating highly specialized machinery that works in perfect synergy. Each component of the line has been selected to ensure efficiency, reliability, and superior quality in the bottling process. While the current configuration is optimized for wine, the flexibility of the machinery allows for adaptations to other beverages, always maintaining high operational standards. Emmeti MT665 Empty Bottle Depalletizer Year 2017 The Emmeti MT665 empty bottle depalletizer, built in 2017, is the initial element of the bottling line. This machine  ...

Used HEUFT empty bottle inspector 72000 BPHTechnical Specifications & Performance DataThis Empty Bottle Inspector (EBI) is engineered for high-speed beverage production and industrial packaging environments. Manufactured by HEUFT, the system combines a HEUFT InLine reflexx Release 9 inspector with a HEUFT Spectrum SX TB 72 pre-selection unit, networked for complete bottle flow control. Designed for integration in a used bottling line, it offers robust inspection performance for returnable glass bottles at line speeds up to 72,000 bottles per hour.Manufacturer: HEUFTPrimary model: InLine reflexx Release 9Pre-selection unit: Spectrum SX TB 72 (with Gateway II network interface)Additional platform reference: Spectrum TXYear of manufacture: 2009Maximum capacity: 72,000 bottles/hourBottle formats: Compatible with 0.33L and 0.5L bottle formatsContainers: Designed for Glass bottle handling (gre ...

Technical Specifications & Performance Data The New Bottle Inspector Weight Checking Inspections Unit with Rejection Piston is an inline, high-throughput solution engineered for precise mass verification of individual packages without stopping product flow. Purpose-built for beverage production and industrial packaging environments, it delivers reliable, non-contact rejection for out-of-tolerance items, ensuring consistent quality and regulatory compliance. Application: Inline dynamic weight control with automatic reject piston Maximum speed: up to 11,000 bph (bottles/packs per hour) Inspection type: 2 (dual-threshold underweight/overweight logic) Containers: Brik cartons and cans (aluminum tins/cans) Conveying architecture: multi-conveyor configuration (4 conveyors) for stable weighing and controlled reject Operation: Simultaneous weighing without line stoppage; positive push-off reject ...