136,841 used machines on RESALE, but how to find them? Machine Search
A Nagel Rilank duo in excellent condition. Can ship worldwide.
Key data: 1900 mm, 4 , 380 mm
Description 1 indestructible 4 roller wide belt sanding machine from Böttcher & Gessner - grinding width ca. max.1900 mm, machine can drive up to approx. 390 mm, constant table machine. Two grinding rollers at the top and two at the bottom, one of which oscillates at the top and one at the bottom, retaining belts are clamped directly on the individual rollers. Weight approx. 10 t... With roller conveyor to the left and right of the machine 1. Performance data grinding machine Upper grinding motor No. 1 30 kW / 80 A Upper Grinding Motor No. 2 30 kW / 80 A Lower grinding motor No. 1 30 kW / 80 A Lower Grinding Motor No. 2 30 kW / 80 A Feed motor 7.5 kW / 25 A Motor table adjustment 7.5 kW / 25 A Fuse main switch with 400 A. Overhead crane for dismantling is available. Sale as seen without warranty from location and without dismantling.. But help is being provided. ...
SELA TR70 Pasta Machine Mixing pan capacity: 4kg Hourly mixing + pressing output: 5-8kg Hourly output press only: 8-12kg Dimensions: 44x25x42H Weight: 28kg Power: 380W Machine with cutting device and 4 dies neat and smooth running Machine must be thoroughly cleaned before use Video about test run available
Manufacturer: TOS Model: SKIQ 8 Year: 1960 Condition: Used Stock number: 9540 Clamp plate diameter: 800 mm Max. workpiece height: 700 mm Max. workpiece weight: 2500 kg Weight: 16000 kg
The machine is in good technical condition; testing is possible by prior arrangement. Fanuc 0i-TD control system, running time: 5,876 hours.
Key data: 120 mm, 1 mm
- Max. belt width – 120 mm - Sheet thickness - 0.1 – 1.0 mm (40 kp/mm2) - Speed 6 - 36 m / min - ( 10 cm - 60 cm/ s ) - Guideline Cross section – 100 mm2 - Conveyor inlet – left - Control – Start-Stop - Roller mill adjustment – motorized - Mobile version - Drive 0.55/0.75 kW - 750 / 1400 rot/ min - Original documents Btto – 400 kg
- max. belt width – 250 mm - Sheet thickness - 0.2 – 5.0 mm (40 kp/mm2) - Straightening roller diameter 18 mm - Number of leveling rollers 19 pcs - Min. workpiece dimensions in the flow direction 24 mm - Machine setting reading - 0.01 mm - Infeed table length 220 mm - Speed 3 - 36 m / min - ( 5 – 60 cm/ s ) - Guideline Cross section – 580 mm2 - Roller mill adjustment – MANUAL - Mobile version - Drive 1.6 / 3.2 kW - 750 / 1500 ot / min - Original documents Btto – 550 kg
HAKO Citymaster 1250 Municipal implement carrier with 2-broom suction-sweeping unit This Hako Citymaster 1250 was first commissioned in 2015, has only about 300 total operating hours according to the meter and is in a very good general condition with the usual signs of use and wear, fresh from the large customer service, immediately ready for use, cf. NP 110.000,-€! Other accessories include a flatbed, a wide tire wheelset and a catalytic converter municipal mount. The sale is made as a used machine under exclusion of return, guarantee and warranty. - Net price 39.900,-€ // Gross price 47.481,-€ - Inspection / test drive possible - Shipping can be organized nationwide, the costs depend on the distance! - We would be happy to have an attractive leasing / financing offer prepared for you by our leasing partner!
Code: 0484 Brand: VOLPATO Model: LBO-60/G - CE Standard Cast-iron belt sanding machine with 3 motors for wood, composites, metals, aluminium and various materials - CE Standard Technical data: Cast iron base Table length mm 3000 Table width mm 1000 Vertical stroke mm 680 Belt size mm 8400 x 150 Motor Kw 4,12 - Speed 18 mt/sec Reverse belt rotation Vacuum motor Kw 0,56 Diameter pulleys mm 240 Suction diameter mm 120 Overall dimensions mm 4500 x 1500 x 1500 h Weight kg 600
Code: 0480 Brand: CASADEI INDUSTRIA Model: K 60 PM - CE Standard Automatic edge bander with trimming unit for panels, furniture, furnishings, kitchens, and various - Year 2024 - CE Standard Technical data: Min/max panel height 8–60 Edge thickness10 mm Min panel length 120 mm Min panel width 110 mm Panel feed speed 11 mt/min Panel support roller opening 500 mm Configuration: Infeed trimming unit : 2 diamond cutters diameter 60 mm 64 mm height - PLC-controlled work cycle - Adjustable material removal from 0 to 2 mm with digital display - HF motors, 200 Hz - 12000 rpm - 1,1 Kw each PLC-controlled logic operation - Full machine control - Electronic glue heating control - Automatic temperature standby Infrared lamp for preheating the panel after pre-milling Anti-adhesive liquid spray unit Glue tank - Tank capacity 2 kg - n° 7 electric heating elements Pressure rolle ...
The system labels with two modules using the wet-glue process and can label with hot glue by means of a third additional module. Dimensions: approx. 3.80m x 3.00 m The labeller achieves an output of up to 15,000 bottles per hour. Condition: in operation, fully functional Machine dimensions (LxW): 3800 x 3000 mm Output: up to 15,000 bpm Viewing by arrangement
The machine is in good technical condition; it can be tested by prior arrangement.
turning diameter: 400 mm turning length: 549 mm control: HEIDENHAIN Eltropilot swing over bed: 570 mm travel -x axis: 220 mm travel -z axis: 635 mm main spindle bore: 79 mm main spindle speed: 25 - 5000 U/min main spindle drive: 21 kW max. torque on the spindle: max. 240 Nm : 120 mm c-axis, speed: 100 U/min C-axis: Haltemoment 200 Nm C-axis resolution: < 0,04 ° sub spindle bore: 56 mm sub spindle speed: 25 - 5000 U/min sub spindle drive: 9 kW max. torque on the spindle: max. 72 Nm : 90 mm c-axis, speed: 100 U/min C-axis: Haltemoment 150 Nm C-axis resolution: < 0,04 ° feed power X/Z axis: 3,5 / 7 Nm rapid traverse X-axis: 20 m/min rapid traverse Z-axis: 24 m/min tool turret: 1 x 12 Stationen number of driven tool stations: 12 speed of driven tools: 4.000 U/min total power requirement: 44 kVA Accessories: collet fixture HAINBUCH on main spindle, 3-jaw chuck RÖHM, 140 mmø, on sub ...
x-travel: 400 mm y-travel: 400 mm z-travel: 400 mm table surface area: 700 x 460 mm spindle taper: SK 40 spindle turning speed range: 31,5 -5000 U/min spindle drive: 5,5 kW quill stroke: 80 mm vertical head swivelling: +/- 90 ° control: DIALOG 11 feeds x/y/z -stepless: 3000 mm/min rapid traverse: 6 m/min total power requirement: 13,8 kVA weight of the machine ca.: 2 t dimensions of machine L x W x H: 2,73 x 2,0 x 2,0 m Accessories: solid table, vertical head with hydr. tool clamping and quil retraction, dividing unit HOFFMANN, RW/NC 125 L, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Gebr. Long belt grinding machine JOHANNSEN T85 ST / PNEUMA YOC 1991 Total connected load: 5.62 kW / 13 A Motor power: 5.5 kW Table size: 280 x 95 cm Pneumatic grinding unit (pneumatic pressure) electr. Table lift Belt dimensions: 150 x 7,800 mm Offset (both sides): 550 x 310 mm 1 sanding shoe 450 mm Switch for clockwise/counterclockwise rotation Integrated lighting Rotating belt blow-out device Extraction connection: 140 + 120 mm Space requirements: 395 x 230 cm Weight: approx. 750 kg The machine comes from a 1-man operation.
: neu : ca. 6 Monate ab Auftragse : Taiwan : 41800 € : 798.38 € : 65 - 2600 U/min : ISO 40 : 420 x 220 x 380 mm : 840 x 390 mm : 2.2 kW : 1600 mm : 1700 mm : 2000 mm : 1145 kg : 840 x 390 mm : 1000 mm/min : 5 : 14 x 63 mm : 200 kg : 420 mm : 220 mm : 380 mm : 0 - 600 mm/min. : 0 - 600 mm/min. : 65 - 2600 : 90 - 310 mm : 65 - 2600 : +/- 90° ° : 100 mm : manuell : 2,2 kW : 950 x 250 mm : 90 - 310 mm : 100 - 480 mm swiveling operating panel 3 axes digital read out Fagor 40i Innova motor for horizontal- and vertical spindle: 2,2 kW feed motors with inverter for X/Y/Z: 0,35 / 0,35 / 0,75 kW ball screw spindles for X/Y/Z axes manual gear box for spindle speeds 1 pc. long milling arbor 27 mm 3 pcs. recustion sleeves (MK1, MK2, MK3) 1 pc. drawing bar ISO40 for horizontal or vertical spindle spindle protection with switch table safety guard with doors with switches outer arbor support for h ...
bore capacity in steel (diameter): 32 mm throat: 280 mm bore stroke: 145 mm taper MK: 3 MK table-size: 540 x 480 mm feeds: 0,08 bis 0,32 mm/U turning speeds: 180 - 2000 U/min total power requirement: 3,0 KW weight of the machine ca.: 0,9 t dimensions: 1,2 x 0,8 x 2,4 m Column drilling machine with: - Power feed - Thread-cutting attachment - Coolant pump - Machine light - Incl. machine vice - Emergency stop device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 600 mm y-travel: 400 mm z-travel: 320 mm table-size: 900 x 420 mm control: konventionell tool adaptor: SK40 turning speed range: 35,5 - 1800 U/min quill stroke: ja mm total power requirement: 5,0 kW weight of the machine ca.: 1,45 t dimensions: 1,6 x 1,2 x 1,9 m Features: - Digital display - Coolant system - Milling head with quill The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm table surface area: 720 x 410 mm spindle turning speed range: 40 - 2000 U/min : mm/min feeds Z-axis: mm/min tool taper: SK 40 total power requirement: 3,0 kW weight of the machine ca.: 1,4 t dimensions: 1,8 x 1,6 x 1,9 m Milling machine with - Toolmakers table - Heidenhain digital readout - Rapid traverse - Coolant system - Central lubrication - Machine feet - incl. drawer unit with contents The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 2040 mm plate thickness: 6,0 mm distance between columns: 2100 mm roll diam. toproll: 180 mm roll diam. bottom roll: 160 mm total power requirement: KW weight of the machine ca.: 2,4 t dimensions of the machine ca.: 3,5 x 0,85 x 1,75 mm Sheet metal bending machine with 3 rollers - 2 driven rollers - Emergency stop device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
plate thickness: 4 mm cutting length: 225 mm blade length: 225 x 225 mm table surface area: 710 x 500 mm total power requirement: 3,5 kW weight of the machine ca.: 0,7 t dimensions of the machine ca.: 1,2 x 0,8 x 1,1 m 90° Notching machine Large table Adjustable stops Footswitch Emergency stop switch Scrap collection bin The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 3200 mm faceplate diameter: 2800 mm turning height: 1600 mm Control: Siemens 840 dsl workpiece weight: max. 16.000 kg Dimensions (L/W/H): 5.500 x 6.450 x 4.900 mm weight - pallet system: 43.000 kg Max. turning diameter: 3,200 mm Table diameter: 2,800 mm Max. turning height: 1,600 mm Max. workpiece weight: 16,000 kg Table speed: 70 rpm Number of table speed ranges: Constant Vertical travel, Z-axis (ram stroke): 1,100 mm Horizontal travel, X-axis: 1,720 mm Working feed range: 2–2,000 mm/min Rapid traverse X/Z: 7 m/min Cross rail travel speed: 360 mm/min Main motor power: 55 kW Total installed power: 69 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Surface Grinding Machine Manufacturer: Elbschliff Elb Type SHW4 VA Grinding length 450mm Grinding width 200mm Grinding height 250mm Machine still works very precisely, so geometrically it is still top. Machine will be available from mid-October.
Manufacturer: HAUSER Model: - Condition: Used Stock number: 9547 The mill is in good condition. Equipment: DRO
Manufacturer: AMADA Model: LC 2415 ALPHA IV NT Year: 2006 Condition: Used Stock No: 9545 Control system: AMNC-F/FANUC Hours: 25729 h Maximum power: 2.5 kW Work table length: 5040 mm Work table width: 1550 mm Maximum table load (uniform): 330 kg Maximum sheet thickness when cutting: 12 mm Feed length X-axis: 2520 mm Y-axis feed length: 1550 mm Feed length Z-axis: 300 mm Cutting speed: 20 m/min The set includes: laser machine, transformer, cooling station, cleaning station, compressor.
Manufacturer: ZPS Model No.: S60/1000 CNC Year: 2001 Condition: Used Stock number: 9546 Control system: Heidenhain Pilot 3190 Maximum turning length: 1000 mm Max. turning diameter: 275 mm Maximum length of travel in the X-axis: 275 mm Maximum feed rate in the Z-axis: 1070 mm
Manufacturer: JONES-SHIPMAN Model: 540 AP Condition: Used Stock number: 9548 Maximum spindle speed: 2800 1/min Capacity: 450 x 150 mm
Manufacturer: JUNG Condition: Used Stock number: 9549 The mill is in good condition.
Manufacturer: TSCHUDIN Model No.: HTG 410 Condition: Used Stock number: 9550 Maximum grinding length: 420 mm Maximum speed of the grinding wheel spindle: 500 1/min Maximum grinding wheel diameter: 350 mm
Column drill Ixion BS 30GL with reinforced motor. Year of construction: 1998. lead screw included. Also included are two drill masters, each with three threaded spindles, as well as an additional spare board.
Key data: 62 kN
Cronoplast S.L. BabyPlast 6/10 Vp-T⌀12 / Production line with robot, turntable and additional automation Year of Make: 2011 Clamping unit: Clamping force: 6.25 t Clamping unit: hydraulic Control: BABYPLAST - Touch Screen Additional equipment: Production line with robot, turntable and additional automation Vertical Injection Molding Machine Air valves Injection for mold division Automatic adjustment of the injection unit setting (top - bottom) The turntable is driven by a servo motor controlled by an inverter – very precise Automatic part feeding with quality control system Machine workplace protection with safety package Dimensions: Weight: 350 kg Length/Width/Height: 0.70x1.00x1.65 m All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to ...
Key data: 360 kN
LWB STEINL VCRS-T 300/36 T / Machine like new Year of Make: 2006 Injection unit: Dosing volume: 36 ccm Clamping unit : Clamping force: 30 t Ejector: hydraulic Clamping unit: hydraulic Control: LWB ECO Additional equipment: Hydraulic core pull x 1 Control with air valve The injection unit was made of bimetal Dimensions: Weight: 3000 kg All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request
Key data: 1100 kN
Ferromatik Milacron K110D-S/2F / 2K Injection Molding Machine Year of Make: 1998 Injection unit: Screw diameter: 30 mm Injection weight: approx. 85 g Spray pressure: 2298 bar Dosing volume: 99 ccm Clamping unit: Clamping force: 110 t Spar spacing: 470x470 mm Size of the clamping plates: 740x740 mm Ejector: hydraulic Clamping unit: hydraulic Control: Ferromatik Milacron Additional equipment: 2-Component Injection Molding Machine Euromap 67 Robot interface Hydraulic core pull x 4 Control with hot runners Injection unit is wear-resistant and resistant to corrosion Screw diameter in vertical injection unit: ⌀25 mm - approx. 43 g/hp The machine was regularly serviced Recently, the service center replaced the cylinder of the machine with worm and the hydraulic valves with new ones Dimensions: Weight: 6300 kg Length/Width/Height: 5.00x1.60x3.60 m All o ...
Key data: 3500 kN
Ferromatics Milacron K-TEC 350-2650 / Production line with the Sepro robot Year of Make: 2017 Injection unit: Screw diameter: 70 mm Injection weight: 1104 g Spray pressure: 2175 bar Dosing volume: 1213 ccm Clamping unit: Clamping force: 350 t Handlebar spacing: 750x750 mm Size of the clamping plates: 1110x1165 mm Ejector: hydraulic Clamping unit: hydraulic Control: MOSAIC - Touch Screen Additional equipment: Very good technical condition High-speed machine Operating hours: approx. 10,000 h in automatic mode Euromap 67 Robot interface Air Valve x 5 Hydraulic core pull x 3 Control with hot runners Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Parallel movements Machine with cylinder / battery with compressed nitrogen (extra charge for fast working) Energy-efficient machine – has a system with 3 hydra ...
Key data: 1000 kN
Boy 100E / Hybrid Machine Year of Make: 2014 Injection unit: Screw diameter: 32 mm Injection weight: 92.3 g Spray pressure: 2127 bar Dosing volume: 96.5 ccm Clamping unit: Clamping force: 100 t Tiebar spacing: 430x360 mm Size of the clamping plates: 750x650 mm Ejector: hydraulic Clamping unit: hydraulic Control: Procan Alpha 2 - Touch Screen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Euromap 67 Robot interface Control with air valve Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving Dimensions: Weight: 3530 kg Length/Width/Height: 4.37x1.21x2.20 m Drive: Pumps/motor: 15 kW Heating capacity: 7.7 kW Total power: 22.7 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technica ...
Key data: 1500 kN
Ferromatics Milacron Magna T(MTs) 150-450 / Production line with the Wemo 6-5 xDesign robot, Wemo WCS-R conveyor belt and contactor housing / Machine in very good technical condition Year of Make: 2017 Injection unit: Screw diameter: 45 mm Injection weight: 215 g Spray pressure: 1984 bar Dosing volume: 226 ccm Clamping unit : Clamping force: 150 t Tiebar spacing: 510x510 mm Size of the clamping plates: 740x740 mm Ejector: hydraulic Clamping unit: toggle lever Control: B&R - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: 11,000 in automatic mode Euromap 67 Robot interface Air Valve x 1 Hydraulic core pull x 1 Hot runner controller x 36 (for additional payment) Injection unit is wear-resistant and resistant to corrosion Main motor of the machine – servo motor driven by inverter Central lubrica ...
Key data: 900 kN
Boy 90 M Year of Make: 2004 Injection unit: Screw diameter: 42 mm Injection weight: 193 g Spray pressure: 1724 bar Dosing volume: 214.7 ccm Clamping unit : Clamping force: 90 t Tiebar spacing: 430x360 mm Size of the clamping plates: 635x610 mm Ejector: hydraulic Clamping unit: hydraulic Control: Procan - Touch Screen Additional equipment: Euromap 12 Robot interface Air Valve x 1 Dimensions: Weight: 3100 kg Length/Width/Height: 4.37x1.21x2.20 m Drive: Pumps/motor: 15 kW Heating capacity: 11.3 kW Total power: 26.3 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request
Key data: 800 kN
Boy 80 M Year of Make: 1997 Injection unit: Screw diameter: 36 mm Injection weight: 132 g Spray pressure: 2085 bar Dosing volume: 147.6 ccm Clamping unit : Clamping force: 80 t Tiebar spacing: 410x358 mm Size of the clamping plates: 680x555 mm Ejector: hydraulic Clamping unit: toggle lever Control: Procan CT Additional equipment: Dimensions: Weight: 3200 kg Length/Width/Height: 4.14x1.21x2.07 m Drive: Pumps/motor: 15 kW Heating capacity: 10.4 kW Total power: 25.4 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request
Key data: 550 kN
Boy 55A Pro / Operating hours: 18,153 in automatic mode / Machine in very good technical condition Year of Make: 2016 Injection unit: Screw diameter: 38 mm Injection weight: 123.9 g Spray pressure: 1508 bar Dosing volume: 136.1 ccm Clamping unit: Clamping force: 55 t Spar spacing: 360x335 mm Size of the clamping plates: 665x600 mm Ejector: hydraulic Clamping unit: hydraulic Control: Procan Alpha - Touch Screen Additional equipment: Machine in very good technical condition Operating hours: 18,153 in automatic mode Pneumatic core x 2 Hardened injection unit - Bimetal The machine has been regularly serviced by the authorized Service Boy in France It is possible to change the screw diameter for fi 32 mm or 42 mm Dimensions: Weight: 2430 kg Length/Width/Height: 3.25x1.14x2.02 m Drive: Pumps/motor: 11 kW Heating capacity: 7.7 kW Total power: 18.7 kW ...
Key data: 550 kN
Boy 55A Pro / Operating hours: 16,624 in automatic mode / Machine in very good technical condition Year of Make: 2017 Injection unit: Screw diameter: 38 mm Injection weight: 123.9 g Spray pressure: 1508 bar Dosing volume: 136.1 ccm Clamping unit : Clamping force: 55 t Spar spacing: 360x335 mm Size of the clamping plates: 665x600 mm Ejector: hydraulic Clamping unit: hydraulic Control: Procan Alpha - Touch Screen Additional equipment: Machine in very good technical condition Operating hours: 16,624 in automatic mode Pneumatic core x 2 Hardened injection unit - Bimetal The machine has been regularly serviced by the authorized Service Boy in France It is possible to change the screw diameter for fi 32 mm or 42 mm Dimensions: Weight: 2430 kg Length/Width/Height: 3.25x1.14x2.02 m Drive: Pumps/motor: 11 kW Heating capacity: 7.7 kW Total power: 18.7 kW ...
Key data: 550 kN
Boy 55A Pro / Operating hours: 16,624 in automatic mode / Machine in very good technical condition Year of Make: 2017 Injection unit: Screw diameter: 38 mm Injection weight: 123.9 g Spray pressure: 1508 bar Dosing volume: 136.1 ccm Clamping unit : Clamping force: 55 t Spar spacing: 360x335 mm Size of the clamping plates: 665x600 mm Ejector: hydraulic Clamping unit: hydraulic Control: Procan Alpha - Touch Screen Additional equipment: Machine in very good technical condition Operating hours: 16,624 in automatic mode Pneumatic core x 2 Hardened injection unit - Bimetal The machine has been regularly serviced by the authorized Service Boy in France It is possible to change the screw diameter for fi 32 mm or 42 mm Dimensions: Weight: 2430 kg Length/Width/Height: 3.25x1.14x2.02 m Drive: Pumps/motor: 11 kW Heating capacity: 7.7 kW Total power: 18.7 kW ...
Key data: 100 kN
Boy XS / Excellent technical condition Year of Make: 2020 Injection unit: Screw diameter: 12 mm Injection weight: 4.1 g Spray pressure: 3128 bar Dosing volume: 4.5 ccm Clamping unit: Clamping force: 10 t Handlebar spacing: 160 mm Size of the clamping plates: 321x246 mm Ejector: hydraulic Clamping unit: hydraulic Control: Procan Alpha 4 - Touch Screen Additional equipment: Machine like new Euromap 67 Robot interface Air Valve x 6 Built-in side sprue picker Wittmann automatic conveyor with dryer of the Farratech brand It is possible to buy clamping elements for tools of the AMF brand Dimensions: Weight: 450 kg Length/Width/Height: 1.48x0.52x1.38 m All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical test ...
Key data: 3000 kN
Battenfeld EcoPower SE 300/1330 / Electric Machine Year of Make: 2012 Injection unit: Screw diameter: 50 mm Injection weight: 491.4 g Spray pressure: 2470 bar Dosing volume: 540 cc Clamping unit: Clamping force: 300 t Tiebar spacing: 770x720 mm Size of the clamping plates: 1090x1170 mm Ejector: electric Clamping unit: toggle lever Control: UNILOG B6 - Touch Screen Additional equipment: Electric machine: high-speed, energy-saving and very quiet Machine in very good technical condition Euromap 67 Robot interface Air Valve x 8 Control with hot runners x6 Hardened injection unit - Bimetal Parallel movements It is possible to change the screw diameter for fi 45, 55, 65 mm Dimensions: Weight: 14100 kg Length/Width/Height: 7.20x2.04x2.20m Drive: Pumps/motor: 0 kW Heating capacity: 22 kW Total power: 0 kW All offered machines are started by our s ...
Key data: 2700 kN
Battenfeld HM 270/1330H/1000H / 2K machine in very good technical condition / Operating hours: approx. 10,000 h in automatic mode Year of Make: 2006 Injection unit: Screw diameter: 55 mm Injection weight: 594 g Spray pressure: 2041 bar Dosing volume: 653 ccm Clamping unit: Clamping force: 270 t Handlebar spacing: 710x710 mm Size of the clamping plates: 1030x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B4 Additional equipment: Machine in very good technical condition 2K machine with parallel horizontal injection units Central injection Operating hours: approx. 10,000 in automatic mode Total number of operating hours: 11,876 h Control with air valve Hydraulic core pull x 3 Reinforced Injection Units – Bimetal Proportional valves on injection units - precise spraying Parallel movements Injection unit 1000H Screw diameter: 50 mm ...
maximum number of results exceeded
please refine your search
