bottle filling machines used for sale

Vertical Slotting Machine GSP type M 743 3-jaws chuck Ø 360 mm Table travel: X = 500 mm / Y = 450 mm Slide travel: 300 mm Throat depth: 500 mm Rotary table: Ø 690 mm Slide tilting: + 8° Rotative table/slide maxi height: 450 mm Motor power: 8 CV Rapid feeds on X - Y - W axes Strokes/min.: from 3 to 300 strokes/min. Equipped with one tool removal system upon lifting Voltage: 380 V Length: 2000 mm Depth: 2500 mm Total height: 2200 mm Weight: approx 4 T

Fully automatic slicer Bizerba Type: A404 Technical data: 230/400 volts, 50 Hz, 2.5/1.4 A Cutting thickness adjustment: 0.5 to 12 mm Knife diameter: 330 mm Stainless steel knife medium-sized carriage for a maximum of 40 cm of food to be cut including original Bizerba stainless steel base frame Power current Output: between 30-55 strokes/min 99 different programs can be saved Year of Make: 2011 Total sled lifts: 3,808,688 Machine has been overhauled by a professional in 02/2026 Machine ready for immediate use! Stock machine, immediately available! Condition, see original pictures! If you have any questions, email or call.

voltage: 380 V connected load: 7,5 kVA dimensions: 2725 x 1930 x 1773 mm weight of the machine ca.: 2500 kg --> Technical data Main data: --> Table surface: 605 x 300 mm --> Table longitudinal movement max. (manual): 750 mm --> Table transverse movement: 340 mm --> Grinding height between table/new grinding wheel min/max: 22.5 / 322.5 mm --> Standard size of magnetic clamping plate: 600 x 300 mm --> Workpiece weight incl. magnet: 420 kg --> X-axis / longitudinal movement: --> T-slots (number x width): 3 x 17 mm --> Table feed, hydraulic: 0.3 - 25 m/min --> Travel per handwheel revolution: 47 mm --> Y-axis / height movement: --> Automatic vertical feed - coarse in 12 steps: 0.001 - 0.03 mm --> Automatic vertical feed - fine in 8 steps: 0.001 - 0.01 mm --> Distance per handwheel revolution (x1/x10): 0.1 / 1.0 mm --> Graduation on handwheel (x1/x10): 0.001 / 0.1 mm --> Trigger strokes: 0 - ...

Fully automatic slicer Bizerba Type: A404 Technical data: 230/400 volts, 50 Hz, 2.5/1.4 A Cutting thickness adjustment: 0.5 to 12 mm Knife diameter: 330 mm Stainless steel knife medium-sized carriage for a maximum of 40 cm of food to be cut including original Bizerba stainless steel base frame Power current Output: between 30-55 strokes/min 99 different programs can be saved Year of Make: 2011 Total sled lifts: 6,951,567 Machine has been overhauled by a professional in 02/2026 Machine ready for immediate use! Stock machine, immediately available! Condition, see original pictures! If you have any questions, email or call.

Offer 26091 Technical data: - Max. working width 3200 mm - max. material thickness at 40 kp / mm² strength 2.5 mm - Bending angle adjustment electronically pre-selectable 0 - 180 ° - Operation via hand or foot switch - Largest opening width / stroke of the upper beam 200 mm - Height adjustability - bending beam 80 mm - the lower beam 90 mm - Upper bolster drive approx. 400 V / 1.8 kW - Bending beam drive approx. 400 V / 2.6 kW - Space requirement approx. W 4200 x H 1550 x D 2200 mm - Weight approx. 3800 kg

Fully automatic slicer Bizerba Type: A404 Technical data: 230/400 volts, 50 Hz, 2.5/1.4 A Cutting thickness adjustment: 0.5 to 12 mm Knife diameter: 330 mm Stainless steel knife medium-sized carriage for a maximum of 40 cm of food to be cut Power current Output: between 30-55 strokes/min 99 different programs can be saved Year of Make: 2010 Total sled lifts: 4,177,509 Machine has been overhauled by a professional in 02/2026 Machine ready for immediate use! Stock machine, immediately available! Condition, see original pictures! If you have any questions, email or call.

Fully automatic slicer Bizerba Type: A404 Technical data: 230/400 volts, 50 Hz, 2.5/1.4 A Cutting thickness adjustment: 0.5 to 12 mm Knife diameter: 330 mm Stainless steel knife medium-sized carriage for a maximum of 40 cm of food to be cut including original Bizerba stainless steel base frame Power current Output: between 30-55 strokes/min 99 different programs can be saved Year of Make: 2011 Total sled lifts: 11,018,826 Machine has been overhauled by a professional in 02/2026 Machine ready for immediate use! Stock machine, immediately available! Condition, see original pictures! If you have any questions, email or call.

Fully automatic slicer Bizerba Type: A404 Technical data: 230/400 volts, 50 Hz, 2.5/1.4 A Cutting thickness adjustment: 0.5 to 12 mm Knife diameter: 330 mm Stainless steel knife medium-sized carriage for a maximum of 40 cm of food to be cut including original Bizerba stainless steel base frame Power current Output: between 30-55 strokes/min 99 different programs can be saved Year of Make: 2015 Total sled lifts: 843,190 Machine has been overhauled by a professional in 02/2026 Machine ready for immediate use! Stock machine, immediately available! Condition, see original pictures! If you have any questions, email or call.

Fully automatic slicer Bizerba Type: A404 Technical data: 230/400 volts, 50 Hz, 2.5/1.4 A Cutting thickness adjustment: 0.5 to 12 mm Knife diameter: 330 mm Stainless steel knife medium-sized carriage for a maximum of 40 cm of food to be cut including original Bizerba stainless steel base frame Power current Output: between 30-55 strokes/min 99 different programs can be saved Year of Make: 2012 Total sled lifts: 372,713 Machine has been overhauled by a professional in 02/2026 Machine ready for immediate use! Stock machine, immediately available! Condition, see original pictures! If you have any questions, email or call.

CAM PMM intermittent motion horizontal cartoner with product bucket infeed in extentioned version (plus 500 mm), carton size range min. 15 x 12 x 50 mm (AxBxC), max. 90 x 70 x 200 mm (AxBxC), aeroplane or reverse tuck closure of the carton flaps, capacity up to 140 cycles per minute, compressed air 5-6 bar, machine net weight approx. 1050 kg with product bucket infeed in extentioned version (plus 500 mm), carton size range min. 15 x 12 x 50 mm (AxBxC), max. 90 x 70 x 200 mm (AxBxC), aeroplane or reverse tuck closure of the carton flaps, capacity up to 140 cycles per minute, compressed air 5-6 bar, machine net weight approx. 1050 kg

Fully automatic slicer Bizerba Type: A404 Technical data: 230/400 volts, 50 Hz, 2.5/1.4 A Cutting thickness adjustment: 0.5 to 12 mm Knife diameter: 330 mm Stainless steel knife including original Bizerba knife sharpener medium-sized carriage for a maximum of 40 cm of food to be cut including original Bizerba stainless steel frame trestle, mobile Power current Output: between 30-55 strokes/min 99 different programs can be saved Year of Make: 2014 Total sled lifts: 8,174,870 Machine has been overhauled by a professional in 02/2026 Machine ready for immediate use! Stock machine, immediately available! Condition, see original pictures! If you have any questions, email or call.

Fully automatic slicer Bizerba Type: A404 Technical data: 230/400 volts, 50 Hz, 2.5/1.4 A Cutting thickness adjustment: 0.5 to 12 mm Knife diameter: 330 mm Stainless steel knife medium-sized carriage for a maximum of 40 cm of food to be cut including original Bizerba stainless steel base frame Power current Output: between 30-55 strokes/min 99 different programs can be saved Year of Make: 2009 Machine has been overhauled by a professional in 02/2026 Machine ready for immediate use! Stock machine, immediately available! Condition, see original pictures! If you have any questions, email or call.

Fully automatic slicer packaging line with undertable Cutting / Depositing / Packaging KUCHLER S.A.M. PX3 Technical data: Slicer type: SAM PX3 (year of manufacture: 2016) Type of foil dispenser: SAM IL - 4 - 220 Airless (Year of manufacture: 2016) Type Packer: SAM KP 21 Airless (Year of Make: 2016) Scale & Labeller Type: Mettler Toledo PAZ UC-GTT-M (Year of Make: 2019) including original stainless steel undertable, rollable Including accessories, see original pictures 400 Volt / 50 Hz / 3.8 A Foil size: 21 x 26 & 21 x 21 cm several layers on top of each other can be welded Output up to 150 parcels per hour Cutting thickness adjustment: 0.5 to 12 mm Knife diameter: 330 mm Stainless steel knife, Teflon-coated including original knife sharpener including original knife lifter including original user manual New price in this version approx. EUR 45,000 Function ch ...

ORT RP30 C thread rolling machine 2-roll 30 tons electronic control of speed and position. Brushless motors for the rotation of the rollers Possibility to memorize the parameters for the piece., The machine is visible working in our warehouse in Gussago BS. Test possibility Mimu Machine Tools Rolling is a mechanical processing without chip removal that can be performed cold or hot, having as an aim the improvement of the surface finish (therefore the apathetic behavior of the material., Power (Ton): 30, Number of rollers: 2, PLC: YES

Suitable for automatic processing of PCD-tipped milling cutters, shank tools, disc-shaped tools such as Saws, milling cutters, etc. using the wire electro-erosion process. Accesories: Total enclosure,, Mist extractor, Probe,, Machine lamp,, Automatic central lubrication,, Coolant system dielectric fluid, Fire extinguishing system, Measuring mandrel, Alphanumeric keyboard, cutter outer diameter max: 250 mm, cutting length max.: 200 mm, shank tool diameter: 10 - 250 mm, cutting length: 200 mm, Outside diameter of disc-shaped tools max.: 250 mm, tool weight max.: 20 kg, X-axis travel: 220 mm, Y-axis travel: 300 mm, W axis travel: 200 mm, A-axis rotation range: 60 °, A-axis taper: ISO 40, E-axis swivel range: 120 °, number of revolutions: 80 - 2000 rpm., Dimensions L x W x H: 2235x2630x2130mm, mass: approx. 4500 kg, Connected load approx.: 400V / 50Hz / 4.5KW, colour: turquoise RAL 5021/gr ...

PEELER- SKINNER, TRIO, TYPE: FDS 104 Technical description: Plastic wired belt Belt width: 350 mm Power supply: 380/440 V - 50/60Hz Dimensions: 2200 x 1200 x 1500 mm The TRIO FDS Skinning Machine will skin most kind of fish fillets. The machines are used for skinning Sale and other flat fish, Hake, Haddock, Whiting, Merluza, Hoki, Orange Roughy, Herring, Mackerel, Sardines, Salmon, etc. The machine operates on the principle that the skin of the fillet freezes and glues to the cold, rotating drum, and thus is held in position. The freezing is approx. 1/10 mm deep. A rotating band knife cuts the fillet away from the skin, and the skin is then scraped off the drum. The thickness of the cut, and thus the depth of the skinning, is infenitely adjustable between 0-12 mm. The refrigeration system operates on a system of indirect cooling, a sealed refrigeration unit cooles down a secondary cool ...

SALMON SLICER-PORTIONER, GEBA TYPE: GPS 200 ASW Technical description: Serial number: 6000 204 Year: 2002 Power supply: 380/440 V - 50/60 Hz - 3 Ph Band width: 390 mm (plastic) Weight: 475 Kg Dimensions: 2750 x 1000 x 1490 mm The GPS 200 ASW is the Top Slicer. When the GP series was introduced in 2000 it caused a revolution. The industrial look initiated a new design- era at GEBA. With the new GPS 200 ASW we matched the challenge, to keep on perfektioning this extraordinary line of products, not only optically but also technically. Now you increase your yield and profit with computer-controlled adjustment (ASW) of the slice thickness and the cutting angle.

GRADING - WEIGHING MACHINE, MAREL PROLINE, TIPO: GRA-PR30-04 Technical description: Serial number: A064049 Number of stations: 4 Power supply: 220/240 V - 50/60Hz Conveyor band: Intralox series 1650 ftpp b = 305 Conveyor width: 305 mm Total dimensions: 4900 x 1300 x 1650 mm

PACKING MACHINE FOR TUNAFISH AND ANOTHER FISHES, HERFRAGA MODEL SM-200 Technical features Output: up to 200 cans/minute Recommended output: 150 to 180 cans/minute (according the can type) Format: diameter 83,7 mm Cans height: 25-62 mm

travel -x axis: 880 mm travel -y axis: 630 mm travel -z axis: 630 mm control: HEIDENHAIN - TNC 426M number of spindle speeds: 12.000 U/min numbers of positions in the tool changer: (2 x 16) 32 Tool bore: SK 40 surface area: 1.250 x 700 mm table load: 600 kg Milling machining centers - universal | DMG - DMU 80T equipped with B axis The machine is in good condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: 80 T | 80-T The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Aufschnittmaschine / Slicer DMS (Dillmann Maschinen Systeme Saarbrücken) Type: DAS 330 T Technical data: 400 Volt / 50 Hz / 0.3 kW Year of Make: 2009 Cutting thickness adjustment: 0.5 to 23.5 mm Knife diameter: 300 mm Stainless steel knife, Teflon-coated Including knife sharpener with normal carriage for sausage or cheese Power current / 16A CEE plug Function checked, machine ready for immediate use! Condition, see original pictures! If you have any questions, email or call.

Key data: 1020 mm, 3 mm

Max. bending length: 1020 mm Max. sheet thickness: 3.5 mm steel Bending rail ground Weight: approx. 1000 kg

Release Station 1: Max. sheet thickness: 6 mm steel, 4 mm stainless steel Fixed 90 degree angle with stops Knife length 225 mm Station 2 Incision: Max. cutting width: in one cut 25 mm at 100 mm cutting depth Max. sheet thickness: 4 mm steel Weight: 800 kg

Key data: 5 , 300 mm, 125 mm

Four-sided planing or pre-planing machine Right machine, operation left The machine is especially suitable for planing and pre-planing slats. The floating vertical units in lightweight construction are optimally designed for the processing of curved goods. Short set-up times and fast dimension changes are made possible and guaranteed by the flexibility of the machine. The machine has 5 working spindles, with the following arrangement: [1] [2] [3] 1. Horizontal Down 2. Horizontal top 3. 4. Vertical left/right ( opposite ) 5. Scoring saw at the bottom TECHNICAL DATA Work dimensions Working width: 50 - 300 mm() Working thickness: 30 - 125 mm Working length: min. 1,800 mm Table height: 1,100 mm Feed speed: 50 - 250 m/min. Working thickness up to 160 mm possible with appropriate tools on the vertical spindles. Minimum planing width 50 mm possible with tool D≥250  ...

Pile feeder - Tremat head 4 buckles Anti-noise hood Batch counter Compressor Belt delivery

2 side tables 3 knives Photo cells Program

Fully automatic Rotary feeder 1st unit : 6 buckles RFH-82 2nd unit : 4 buckles BUH-82 3rd unit : 4 buckles BUH-66 SPH-70 belt delivery

Robopac HS30 wrapper, complete, with original documentation. Professionally dismantled

! the regression shown in the photos is not included Equipment: - Electronics control power control PC 20+ - PU top pressure rollers - Motorized height adjustment upper pressure - Hood interior lighting - Infeed ruler adjustable and extended by program - Program adjustment pressure zone - Quickmelt application unit - Autom. Edge retraction - Release agent specification workpiece - Joining milling unit 2 x 2.2 kW - Cross-cut unit 2 x 0.35 kW, with pneum. 2-point adjustment - Pre-milling unit 2 x 0.55 kW - Milling unit 2 x 0.55 kW, with program Adjustment to edge thickness and multi-roller scanning - Shape milling unit top+bottom, 2 x 0.35 kW - Scraper blade with quick-change heads with additional device for pointed workpieces - Surface puller blade glue joint - Detergent specification workpiece - Buffing unit 2 x 0.18 kW - Interface electr./mech. for Ligmatech ZHR01 ...

Inv. Num. : 9056 Type: SPRY 40 CNC-D Producer: ZPS Created: 1994, GO 2016 Parameters: Control system: Siemens Sinumeric 840D Maximum turning length: 300 mm Max. turning diameter: 110 mm Maximum main spindle power: 10 kW Spindle bore: 50 mm Max. rod diameter: 40 mm Weight: 2400 kg Equipment: Duplomatic tool head with rotary tools 3 meter pole holder

Key data: 1350 mm, 1

- Working width 1350 mm - Rubberized pressure rollers - Roller table at the inlet and outlet - Belt feed speed 2.5-13 m/min, infinitely adjustable, perforated belt (prepared for vacuum tensioning device by external, not included drive motor) - Combi-contact roller-grinding unit (15 kW), with electr link pressure bar (element width 25 mm), belt speed infinitely variable from 2.5 to 20 m/s, belt length/width 2150/1370 mm, belt blow-off device, sanding shoe rest in the machine, pneum. Abrasive belt tensioning device - 1 rotating workpiece cleaning brush (0.75 kW) on the outlet side of the machine - Paintwork: RAL 5018 - Total connected load approx. 22 kW (36 A) - Operating voltage: 400 V, 50 Hz Technical data subject to actual equipment The sale is carried out on behalf of the owner from the current location, in the condition as existing, excl. Warranty.

Inv. Num. : 9058 Type: SPV 40 CNC Producer: CZ. TECH Created: 2008 Parameters: Control system: SIEMENS Table diameter: 533 mm Feed length X-axis: 550 mm Feed length Z-axis: 850 mm Max. turning diameter: 850 mm Max. workpiece height: 800 mm Max. workpiece weight: 800 kg Weight: 12500 kg

Qty. 1 Second-hand automatic saw socket production line Mfc.: ADIGE SYS Type: BC 80 Built: 2022 The BC80 is a high-productivity vertical rotary transfer machine that allows you to cut and chamfer tubes and solid bars. Its main features include: fully automatic operation; separate management of scrap and chips; protection for fragile tubes; centralized adjustment for diameter changes; and a simple and intuitive graphical interface. The BC80 is the highest-performing and most efficient solution on the market for the continuous, 24/7 production of bushings up to 80 mm in diameter and from 10 to 350 mm in length. The BC80 can produce up to 2200 parts per hour, cut to length, chamfered, and inspected from a tube or solid bar. Round tube cutting capacity: min. 10 mm (0.4") - max 80 mm (3.15") Bar cutting capacity: 60 mm (2.4") Workpiece length: min. 10 mm - max. 350 mm Loader l ...

Packing machine for full wrapping with sealable films and paper SOLLAS 20 for cartons length 45 – 300 mm, width 40 – 200 mm, height 16 – 96 mm. Output up to 50 pack min., Siemens control with touch screen, little used and ready for operation. The delivery of all spare parts is guaranteed by the manufacturer. Auch + Technik e. Kfm. D-73728 Esslingen Phone +49 1577 5329827

x-travel: 380 mm z-travel: 140 mm dist. cutter spindle - workpiece spindle: 370 mm distance spindle - column: 163 mm table-size: 630 x 150 mm quill stroke: 40 mm milling head -swivable: 360 Grad spindle turning speed range: 120-2000 U/min table feed: 35/65/170 mm/min voltage: 380 V weight of the machine ca.: 130 kg total power requirement: 0,5 kW dimensions of the machine ca.: 0,91 x , 0,68 x 1,80 m Includes 32-piece collet set Includes base cabinet with key Includes small parts Includes operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Completely overhauled in 2013 Heavy duty workpiece headstock tailstock Without chuck and without bezel in the photo Kelco 90 control The machine can be viewed in operation at the customers premises from 2025 up to and including January 2026. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 3600 mm swing diameter: 4500 mm turning height: 1850 mm max. workpiece weight: kg vertical adjustment of the crossrail: mm travel -x axis: mm travel -y axis: mm travel -z axis: mm turning speed range: 0,6- 50 U/min power capacity: kW max. torque on the faceplate: weight of the machine ca.: 72 t dimensions: m verticale turning machine double coloumn - digital scale - double coloumn - 2x ram - movable cross slide - extra toolholder (four station) on the side of facing plate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

groove width: 3-28 mm tool length - max.: 1200 mm working speed: 3m/min+6m/min m/min pulling capacity: 60 kN bei 3m/min kN pulling capacity: 40 kN bei 6 m/min kN stroke: 1050 mm weight of the machine ca.: 600 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sealing machine Dimensions de la clutch : 650 x 450 x 170 mm Sealing length : 650 mm Speed : 0 - 12 m/min Sealing temperature : 0 - 250 °C

Air table 2 side tables 2 knives Photo cells Program

Internal grinding machine WMW SI4 A

Ribbon insterting machine For automatic inserting of one or two ribbons into cutted, straight, rounded and pressed book blocks. Can be used in connection with a casing-in line. Description : Infeed conveyor Bookmark insert Scissor Delivery Formats 350x240x70 mm - 100x65x3 mm or 100x100x3 mm Ribbon width : 3-8 or 6-13 mm Capacity for 1-2 ribbons : 60 cycles/min (depending on the format)

Rotary feeder R530 6 buckles Gate folder MBO A56-DC-24 delivery

MANUFACTURER: Trepko TYPE: XPG 40 MOULDS: 200- 250 Gr Bricks CAPACITY: 80 pcs per minute DESCRIPTION: Trepko XPG 40 Butter forming and wrapping machine 250 gram butter bricks with capacity 4800 pcs per hour. APPLICATION: Butter, Margarine and similar high viscousity products. PRICE: Please contact Used butter machines for sale, used butter packing machines, used butter wrapping machine for sale, used butter form fill seal machine, trepko butter machine, benhil butte packing machine, margarine packing machine, butter foil wrapping machine, margarine foil wrapping machine, used dairy machinery for sale, used dairy equipment for sale, used dairy machines for sale,

Offer 26051 Technical data: - Feed of the milling unit manually - Work table adjustable in height via handwheel - Horizontal and vertical material tension - Milling cutter diameter up to 300 mm - max. Milling height 150 mm - max. Milling depth 110 mm - max. Milling length 500 mm - Angle-adjustable stop Li + Re 20 - 90 ° - Milling spindle speed 2800 rpm - Drive 400 V 2.2 kw - Compressed air connection 6 - 8 bar - Air consumption per work cycle 10 l - Pneumatic profile clamping - Spraying device - Space requirement approx. W 1300 x H 1450 x D 1100 mm - Weight approx. 300 kg

Offer 26050 Univ. notching sawing machine Technical data: - Saw blade dimensions - vertical 400 x 3.5 x 40 mm - - horizontal 400 x 3.5 x 40 mm - Notching area / notch depth vertical 135 mm - Notching area / notch depth horizontal 105 mm - Notching width at 90° to 280 mm - Notching width at 30° to 100 mm - Vertical saw blade manual 90° - 30° swivel via handwheel - Use as a Schiftersäge without horiz. Saw blade possible - Profile stop shoulder can be swivelled 30° - 90° - 30° - Pneumatic material vise - Coolant spray device - Air connection 6 bar - Drive 400 V / 2 x 2.2 kW / 2800 rpm - Space requirement approx. W 2200 x H 1600 x D 1400 mm - Weight approx. 800 kg

Welding Machine Urban Plastic Window Welding Machine Type: AKS 3610 Year of manufacture: 2/92 Connected load 2.7 kW Mains voltage 220 V, 50/50 Hz Operating pressure 8 bar Air requirement per weld/stroke 15 l at 6 bar Adjustment range angle 30° - 180° Profile height min. 30 – max. 105 mm Profile width at 90° max. 157 mm Compressed air connection NW 8, 7 bar - Heated blade bead limitation 0.2 mm - Angle welding from 30° - 180° with excellent accuracy. - Above-average welding results of the AKS 3610 for acrylic and foil-coated profiles. - Optimization of the welding result through parallel welding processes. - Individual setting of all welding parameters - Quick change of the outer contour allowances with holding magnets. Machine dimensions: L 770 mm x W 880 mm x H 1500 mm Weight: 320 kg

Wing Attachment Table Dimensions approx. L 2700 mm x W 1300 mm with glazing bead saws right and left Handle drilling unit with 3 drills Automatic screwdriver Lock box milling machine Drill bits for corner trestles Good, ready-to-use condition.

bore capacity in steel (diameter): 50 mm throat: 300 mm bore stroke: 250 mm spindle diameter: 60 mm spindle taper: MK 5 spindle turning speed range: 18 - 1400 U/min no. of turning speeds: 12 Stufen feeds: 0,1 - 1,6 mm/U number of feeds: 9 Stufen table surface area: 500 x 500 mm spindle drive: 4 kW total power requirement: 4,2 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 1,2 x 0,8 x 2,55 m Bench drill with - Forward/reverse rotation - Thread cutting - Coolant - Emergency stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 406,4 mm gear width: 66 mm max. module: ca. 12,5 min. module: Control: Zyklengesteuert total power requirement: 21 kW weight of the machine ca.: 12,5 t dimensions of the machine ca.: 3,3 x 2,5 m The GLEASON 641 G-PLETE bevel gear generating machine is a proven and robust solution for the production of spiral bevel gears, hypoid gears, and Zerol bevel gears usingthe well-established Gleason generating method. Designed for reliable and repeatable machining processes, this machine is ideally suited for small to medium batch production in industrial gear manufacturing. The 641 supports both roughing and finishing operations in a single setup (completing process), ensuring consistent gear quality while reducing handling time. Its mechanical generating system with variable roll ratio and plunge feedmechanism allows precise control of the tooth geometry, making it a depend ...