136,460 used machines on RESALE, but how to find them? Machine Search
sheet width: 2040 mm plate thickness: 3,00 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 2,30 t dimensions of the machine ca.: m Manual and automatic bending operation possible Bending angle adjustable via potentiometer Upper jaw stroke height and material thickness selectable via DIP switches Manual backgauge with spring fingers The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 700x1000x1300 mm Weight: 115 kg Total power requirement: 0,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
SCM F5L Surface planing machine Planing width 510mm 4 knife shaft YOC 1995 Functionality: fully functional G&-5214-M3L42
A textile washing machine and a textile dryer, both from the manufacturer Nexia, are available. 1) Textile washing machine Nexia LC 55, year of manufacture: 2018, connected load: 9kW, heating medium: steam, max. steam pressure: 4.5bar, drum speed: 829rpm, max. batch weight: 55kg, drum diameter: 977mm, drum depth: 753mm, drum volume: 565l, machine weight: approx. 1700kg. 2) Textile dryer Nexia 55S, year of manufacture: 2018, connected load: 2.2kW, drum speed: 25rpm, drum volume: 1085l, drum diameter: 1200mm, max. batch weight: 36kg, heating type: steam, machine weight: approx. 800kg. Documentation available. An on-site inspection is possible.
Number of spindles: 4 St. Working width: 15 - 230 mm Working height: 10 - 125 mm Feed speed: 6 - 24 m/min. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
SCM S520 Thickness planing machine 4 strip knives El-height adjustment 520mm planing width 4 strip knife shaft Electric height adjustment Functionality: fully functional G&-5213-M3L42
table diameter: mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Printing plate development machine Fuji FLHZ 165 CD; infeed width 165cm; Interface Kit; High Pressure Kit; Chiller; Drip pan; Lay on Roller flushing section; Raised feet 80mm. Plate processor Fuji FLHZ 165 CD; working width 165cm; Interface Kit; high pressure kit; chiller; drip tray; lay on roller for water section; elevated foot 80mm.
clamping plate: 595 x 445 mm drawing length: 400 mm stroke: 400 mm weight of the machine ca.: 1.600 t dimensions of the machine ca.: 1.400 x 1.200 x 1.500 mm Minimum/maximum cutting speed: 0 - 20 m/min Minimum/maximum return speed: 40 m/min Maximum workpiece diameter according to DIN6885 (bore): 230 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: mm turning length: mm control: 0 total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
voltage: 110 - 230 V frequency range: 50 - 60 Hz Power connection: 0,5 kVA Dimensions (HxWxD): 1000 x 800 x 1750 mm weight: 150 kg Measuring machine for bar knives. Equipment/accessories: -Measuring tools -Clamping devices -Computer -Monitor -Printer -Cabin -Technical documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding diameter: mm grinding length: mm centre height: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
-High-speed stacking and banding delivery to work behind any folder or other finishing machine with 1, 2 or 3 up banding capacity -Year 2001 -Maxi size 760x330 mm -Min size 335x235 mm -Bundle Delivery -Jogging station -Pressing station -Delivery table, good working conditions -Max. width 760 mm - 1 use -Max. width 335 mm - 2 use -Max. width 235 mm - 3 use -Max. length 305 mm -Package height 20 - 150 mm -Available immediately
Used packaging machine for cottage cheese, type: XPG-40. New: 2018 Technical specifications: Capacity: up to 90 packs/min Power: 2.2 kW Dimensions: 3030 x 2700 x 1800 Weight: 1600 kg On an inverter with smooth speed control and a photocell, after a complete overhaul - like new. Almost unused. Packed cottage cheese. No conveyor. Packed.
pressure: t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Strapper, Mosca, RO-TR700-4 – used - : Price from location: only 3.500.-€ (net) from location! Manufacturer: Mosca Type: RO-TR700-4 Year of Make: 2004 Item no. 75151 Channel size: approx. 70cm × H: 56cm 3L-N-PE, 400V, 1.5kW, 2.5A, Control voltage 24V, DC However, the band used – bandwidth can be changed with a conversion kit: Belt length: approx. 4,500 m per roll Band width: approx. 8 mm Band thickness: approx. 0.45 mm Sleeve: approx. 200 mm Material: Polypropylene (PP) Colour: black Condition: good, trim sheet is missing Available: immediately Location: Frankenberg camp / Saxony
Control Fanuc ... 0i - TD Turning diameter ... 500mm Turning length ... 1090mm Inclined bed Spindle bore ... 86mm Number of tools (driven tools) ... 12/12 Axis X ... 300mm Axis Z ... 1200mm Spindle speed ... 10-3500 rpm Axis C ... 0,001° Main engine power ... 15/18.5kW Machine weight ... 6000kg L x W x H ... 4483x1800x1830mm
Manufacturer: Sturtz Model: HSM - 30 / 40 Compact + Year of Manufacture: 2011 Electrical Specifications: - Input Power / Tension: 400 V 50Hz - Connection / Raccord: 25A - Phase: 3~ / N / Pe - Air Pressure / Service Pressure: 7 bar Find more here - .ucymachines/ Contact us at - sales@ucymachines
Offer 26046 Technical data: - 2 mot. Driven rollers - Manual. Lining of the upper roller - Shaft diameter 30 mm - Shaft rotation 6 rpm - Roller diameter 88 - 108 mm - Bending capacity approx. - Flat steel 50 x 8 mm - Square 20 mm - Round tube 42 mm - Drive 380 V / 0.55 kW - with: - Right / left – run - Tube roller set approx. 16 mm - Weight approx. 150 kg - Space requirement approx. W 650 x H 1300 x D 950 mm
sheet width: 3240 mm plate thickness: 2,00 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 3,00 t dimensions of the machine ca.: m Manual and automatic bending operation possible Bending angle adjustable via potentiometer Upper beam stroke height and material thickness selectable via DIP switches Bending rail and machine in excellent condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 560 mm y-travel: 460 mm z-travel: 450 mm Control: OSP U10 M total power requirement: 7,5 kW weight of the machine ca.: 5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 150 mm turning length: 1250 mm control: OSP 7000 L total power requirement: 37 kW weight of the machine ca.: 8500 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CNC lathe Okuma LB 4000 EX II – M C750 Control: OSP-P300LA Year of Make: 2017 Turning length: 750 mm Turning diameter: 430 mm Swivel diameter over bed: Ø 670 mm Swivel diameter over slide: Ø 480 mm Speed: 42 – 4,200 rpm Tool turret: V12 (all places driven) Equipment: - Chip conveyors - Touchsetter - 3-jaw chuck - Tailstock
ECKERT Opal WaterJet CNC waterjet cutting machine was built in 2019 in Poland by ECKERT AS Sp. z o.o. The machine is designed for precision machining of a wide range of materials, i.e. metal, stone, wood and plastics. Workpieces with a maximum thickness of 150 mm are machined by means of a reliable cutting head with anti-collision and tool height sensor. During cutting, only water is used, making the process free of harmful fumes and safe for the environment. The ECKERT Opal WaterJet is distinguished by its robust water table with a double WEMA grating system. The design made of closed steel profiles ensures high stability during even the most intensive challenges. All travel components, in turn, are protected by bellows covers. This solution guarantees uninterrupted operation of the machine for many years of use. The ECKERT WaterJet is operated via a state-of-the-art industrial co ...
Max. bending length: 3240 mm Max. sheet thickness: 2 mm steel Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via dip switch Bending rail and machine in top condition Weight: approx. 3000 kg
2 x injection moulding machines EL - EXIS 200 S incl. Wittmann robot cell for removal and feeding ( No IML ) EL - EXIS 300 S incl. Wittmann robot cell for removal and stacking ( no IML )
Hebrock edge banding machine K36 with extraction connection Technical data: • Version for R1 (1 mm) • PLC control (incl. touchscreen) • Hot melt adhesive specification on the workpiece for edge material up to 3 mm joining milling machine (incl. DIA tool) • Up to 3 mm milling depth • Maintenance-free coated glue basin with alternating basin pre-installation • Incl. adhesive run-out device • HF cross-cut saw station (approx. 16,000 rpm) • HF milling station (approx. 16,000 rpm) • With pneumatic milling adjustment and interchangeable insert milling cutter (combined version) • Corner round milling machine • Radius scraper blade • Wing scraper blade (incl. pneum. Excavation device) • Cleaning station • Robust chain drive • Ball-bearing double roller top pressure • Unit viewing window from the rear and operating side of the machine • S ...
Max. sheet size: 740 x 1040 mm Min. sheet size: 350 x 400 mm Max. production speed: up to approx. 8,000 sheets/hour Max. die-cutting force: approx. 250 tons Paper / cardboard thickness: 90 g/m² – 2,000 g/m² Max. corrugated board thickness: approx. 4 mm 68,372 operating hours Standard machine with existing accessories Pallet feeder (NonStop) Pull lay on the left side Stripping station Blanking station Non-stop delivery min. 4 × upper frames min. 4 × lower frames 2 × quick-lock frames
Wood Her STREAMER 1057 FU + PU Edge thickness 0.4 - 6 mm Modern control system with selector switch for setting the units Pre-milling unit for attaching in front of the glued part Fully automatic edge magazine for roll and strip goods Glue application station GLU-JET cartridges + PU gluing Adhesive application using nozzle technology Workpiece height 6-60 mm Car. Glue height adjustment High-quality 3-roll printing unit, 1st roll motorized Cross-cut unit pneum. for rolls and strips up to 6 mm edge thickness with pneumatic adjustment of 0-10° slant of the cross-cut saws Milling unit, flush milling 6 mm, radius milling - chamfer milling - 15° Corner copy unit - 3 mm edge thickness Scraper unit for chamfers and radii with 2 scraper carriers Surface Scraper Unit - Finish Spraying Device - PU Machine with all machining tools Machine is WORKSHOP TESTED in TOP CONDITION
Paper drill Dürselen Corta PB 04 N; very good condition; cleaned and tested; 4 drill heads; Drilling lubrication and cooling; Speed regulation; speed table stroke adjustable; max. Stacking height 50mm; insertion depth behind drill 42mm; Sliding table; Hole spacing 31.7-293mm; Endless drilling belt. Paper driller Dürselen Corta PB 04 N; good condition; cleaned and checked; 4 heads; lubrication and cooling system; adjustable drilling speed; adjustable table hub speed; max.pile hight 50mm; depht behind the driller 42mm; slide table; distance between the holes 31,7-293mm; Endless Drill Band.
Spiral mixer Kemper ST 125 A + 2 boilers Type: SP 125 A with 2 boilers, optional extra boiler to purchase for max. 125 kg flour or for max. 200 kg dough with 2 automatic timers Bowl diameter 90cm Tub capacity: 300 liters Boiler drive by friction wheel Boilers are manually locked extendable with 2 timer relays automatic 2 speeds fast and slow Flour dust cover Spiral and tools made of stainless steel Boilers are also made of stainless steel Machine is anchored to the ground with 2 screws Machine head moves up or down when the boiler is retracted and extended. 400 volt power connection Robust and stable machine Tested for function
Technical data Year of Make: 2007 Closing page Clamping force: 1300 t Opening distance/installation height max. : 2300 mm Max. spacing of the clamping plates: 4000 mm Tool installation height min./max. : 1000 - 1700 mm Clamping plate max. Height: 1910 mm Min. tool size: 1000 - 1700 mm Lights spar spacing: 1500 mm Nozzle radius: R40 mm Tool weight: 29000 kg Ejector stroke: 350 mm Splash side Screw diameter: 135 mm Displacement: 8588 cc Core Cables AWS/DS: 1/1 Needle gate tire. : 1 Machine is delivered with Kuka robot and can be viewed in production.
Manufacturer: Widmann Model: SI 100 - Top Year of Manufacture: 2022 Certification: CE Electrical Data: - Apparent Power: 42 kVA - Frequency: 50/60 Hz - Voltage: 3 x 400 V / N / PE - Current: 80 A Machine Cycles: 695,067 - Total Cycles: 810,321 - Total Operating Hours: 268 h Find more here - .ucymachines/ Contact us at - sales@ucymachines
faceplate diameter: 1.600 mm swing diameter: 2.000 mm turning height: 1.400 mm Control: Fanuc max. Torque: 23.863 Nm cutting capacity: max. 3.000 kgf max. workpiece weight: 10.000 kg table:: table diameter: 1.600 mm table speeds: 0,7 - 280 1/min power capacity - table: 37/45 kW C - Axis:: resolution: 0,001 ° Working speed: 0 - 1.200 °/min max. table speed: 3,333 1/min turret slide:: Shank diameter: 32 mm spindle cone: ISO 7/24 / No.50 Spindlespeed: 30 - 3.000 min/-1 power capacity - Tool Spindle: 15 / 18,5 kW max. Torque: 235 Nm ram cross section: 220 mm axis stroke:: x-axis: 1.900 mm z-axis: 900 mm cross rail adjustment: 700 mm Tool-Presetter:: tool taper: MAS-BT 50 number of toolpositions: 24 (12 + 12) pos. max. tool weight: 50,0 kg draw bolt: DIN 69872.50 feeds:: rapid feed (X / Z): 7,5 m/min feed speeds: max. 7.500 mm/min rapid traverse of the crossrail: 300 mm/min total powe ...
Ref. no.: 17540 Manufacturer: ARBURG Year of construction: 1994 Clamping unit Clamping force: 50 ton Opening stroke: 350 mm Distance between tie bars: 270 X 270 mm Mould height min.: 200 mm Platen size (h x v): 405 X405 mm Injection unit Screw diameter: 25 mm Injection volume: 67 cm³ Shot weight: 61 g Injection pressure: 2500 bar Measurements and weight Dimensions: 3,3 X 1,5 X 2,0 m Machine weight: 2400 kg Further information: Laboratory Machine with Exceptionally Low Operating Hours The offered ARBURG 270 C 500-100 was manufactured in 1994 and originates from the training and laboratory department of a university. The machine was not used in regular production and was mainly operated for educational and testing purposes. The control system shows only approximately 100 operating hours and just 867 machine cycles. The machine is equipped with a hydraulic drive system and the proven ARBUR ...
grinding wheel diameter: mm table length: - mm table width: - mm total power requirement: 5,5 kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 600 mm : 500 mm : 400 mm : 1000x500 mm : 1200x250 mm : 40-3200 U/min : DIN 2080 ISO 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Fabricante DAEWOO Modelo PUMA 2000 SY Año 2003 CNC FANUC 18i – T Capacidades Diámetro máx. sobre bancada 600 mm. Diámetro máx. sobre carro 550 mm. Diámetro máx. torneable 330 mm. Longitud máx. torneable 510 mm. Recorridos y avances Recorrido Eje X 250 mm. Recorrido Eje Z 580 mm. Recorrido Eje Y 100 (±50) mm. Recorrido Eje B 580 mm. Avance Rápido eje X 20 m/min. Avance Rápido eje Z 24 m/min. Avance Rápido Y 7,5 m/min Avance Rápido B 20 m/min. Cabezal Eje C INCLUIDO Indexación eje C 0.001 º Paso de barra 76 mm Nariz A2#6 Velocidad 4.500 rpm. Potencia 15 kW Sub-cabezal Eje C INCLUIDO Indexación eje C 0.001º Paso de barra 45 mm Velocidad 6.000 rpm Potencia 7.5 kW Torreta y Herramientas motorizadas Numero de Posiciones Torreta 12 Dimensiones de la Herramienta 25 mm Tiempo de Indexación Torreta 0.1 s Velocidad Herramienta Motorizada 5 ...
Working width: 630 mm Working height: 240 mm Motor output: 5,5 kW Number of knives: 4 St. Feed speed: 6 - 18 m/min. Dimensions (L/W/H): 1.250 x 1.050 x 805 mm weight of the machine ca.: 825 kg : Tersa turning speeds: 4.500 U/min table-size: 630 x 1.000 mm : elektrisch - manuell The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Code: 0299 Brand: SCM Model: S 630/E - CE Standard Automatic thickness planer for carpentry workshops, custom furniture, wooden window frames, wooden carpentry, sawmills, plastics, composite materials, and various - CE Standard Technical data: Electronic table positioning Pneumatic roller pressure adjustment Drive system with 3 large-diameter motorized upper rollers - Easily interchangeable Electronic feed speed variator 4/20 mt/min Work table dimensions 630 x 1000 mm Max working width 630 mm Min/max working height 3/300 mm Min working length 260 mm N° 4 knives Motor Hp 7,5 Feed motor Hp 2 Suction mouth diameter 150 mm Overall dimensions mm 1360 x 1080 x 1220 h Weight kg 1000
Description The Krones Checkmat 731 (built in 2016) is a high-performance inspection system for quality control in beverage filling lines. The machine reliably checks the fill level, closure, label presence and other quality-relevant parameters. Thanks to its seamless integration into Krones' high-speed lines, it ensures consistent product quality and efficient rejection of defective containers. Specifications Manufacturer: Krones Model No.: Checkmat 731 Year 2016 Condition Used Stock number 103822 Current type and system AC 1/N/PE Voltage 230 V Frequency 50
Used, technically overhauled reinforcing steel bending machine. 4 pieces of counter retaining strips. 2 footswitches with emergency stop function. Max. bending power 2 rods 28mm D. Bending speed 6/13 revolution.min. Control Siemens Touch Display CC Power 4 KW.
centre distance: 2000 mm : 600 weight of the machine ca.: 3,2 t Passage 49 mm Digital Lynette The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Used, technically overhauled reinforcing steel bending machine. 4 pieces of counter retaining strips. 2 footswitches with emergency stop function. Max. bending capacity 1 rods 28mm D. Bending speed 6/16 revolution.min. Control with bending pins for three angles adjustable by hand. Power 3.5 KW.
Polar 92 N+, Year 2025 TFT Touchscreen Program Airtable Airtable left Airtable right Etc. Available: at short term
Code: 0298 Brand: OSAMA Model: S1R-250 - CE Standard Manual 1 roller gluing machine for edges and block wood, carpentry, furniture, laminated wood beams, and various - CE Standard Technical data: Max working length 250 mm Roller diameter 150 mm Feed speed 28 m/min Motor power Hp 0,25 Working table height 800 mm Overall dimensions mm 1500 x 700 x 850 h Weight kg 100
Technical data: Travel X/Y/Z: 700 / 250 / 430 mm Top slide travel: 630 mm Spindle speeds: 45 - 1660 1/min Spindle holder: SK 40 Control: conventional Feed table: 24 - 402 mm/min Milling head rotatable: 360° Table size: 1120 x 260 mm Spindle drive: 2.2 kW Total power requirement: 2.4 kVA Dimensions (WxDxH), approx.: 1600 x 1700 x 1700 mm Weight, approx.: 1200 kg Equipment: - Digital display - Machine light - Coolant device - Machine shoes
Key data: 1020 mm, 1 mm
3-roll round bending machine, with wire inserts, seam groove, Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length: 1020 mm Sheet thickness max. steel: 1.25 mm Colour: green Weight: 220 kg Dimensions: 1290 x 600 x 1050 mm Number of round rollers: 3 pieces Roller diameter: 55 mm Machine number 1685
maximum number of results exceeded
please refine your search
