128,279 used machines on RESALE, but how to find them? Machine Search
Rotary vane vacuum pump lubricated Performance: 12 months Manufacturer: Leybold Type: Trivac D8 B and type BCS available Cat No.: 11296 Status: Generalueberholt and repainted Suction power: approx. 8 m3/h Endduck: approx. 5x10e Operating instructions Delivery time: from stock Please contact further details or technical advice via enquiry; ready for use
Rotary vane vacuum pump Manufacturer: Busch Type: R5 RA 305 D Voltage: 50/60Hz 400V nominal suction digesters: 300m3/h End pressure: 0.5hpa(mbar) Status: Generalueberholt Gewaehrleistung- 12 months Including: engine re-storage, repainting, electric check delivery time: from stock; ready for use
State of and exterior absolutely new, general overhaul and repainted Performance: 12 months Manufacturer: Leybold Type: DK 100 Fabr. -No.: 11106 Motor: 400V DS Equipment: Mineraloel Including: User Manual Oel Mist Separator optional Delivery time: on request Photo showing a general-ordered DK200 ; ready for use
Claw vacuum pump dry Manufacturer: Busch Type: Mink MM 1502 AV Motor: DS 400V suction power: 500 m3/h Final pressure: approx. 200 mbar (abs.) Zubehoer: Operating instructions delivery time: by arrangement; ready for use
Turbomolecular pump Manufacturer: Pfeiffer Type: TPU 2000S Status: Used Nr.: PMP01141/9007 A 12-month service is possible; ready for use
Waelz piston pump (rootsblowesis) Status: Generalueberholt Manufacturer: Leybold Type: Ruvac WS 501 Gewaehrleitung: 12 months Spare parts list; Oil filling delivery time: from stock; ready for use
Cooling water pump overtook 716 V12 in Exchange for Deutz
Rotary vane vacuum pump dry Manufacturer: Becker Type: VT 4.40 Condition: Generalueberholt Spannung 400V DS Suction valves. 40m3/h Performance: 12 months Delivery time: from stock Other pumps on request !; ready for use
Cooling water pump for MWM 348 and 484 on an exchange basis
Injection pump drive for Volvo D30 on an exchange basis
Grundfos CRN32-5-2 A-F-G-E-HQQE Vertical Centrifugal Pump CRN 32-5-2 A-F-A-E-HQQE Vertical, multi-stage centrifugal pump with opposing suction and discharge nozzles (in-line design). The wetted components of the pump are made of high-quality stainless steel. The cartridge seal promises high reliability and serviceability. Power is transmitted via a rigid, split clutch. The pipeline connection is made via combined DIN flanges. The pump is equipped with a 3-phase, fan-cooled asynchronous motor. Manufacturer: Grundfos Manufacturer product group: Vertical centrifugal pumps Manufacturer product group: Vertik. Centrifugal Pump CRN Manufacturer's ref.: 96122358 Inlet Side Connection: Flange Outlet Side Connection: Flange Connection standard inlet side: EN 1092-2 Nominal diameter, outlet side connection: DN 65 Type: Vertical Speed: 2924 min Motor output power: 11.0 kW ...
Edwards Pump Station consisting: Rotary Vane Vacuum Pump: Edwards E1M175 Booster Vacuum Pump Roots Pump: Edwards EH1200 Condition: used General recovery of the geraete is possible with a capacity of 12 months. delivery time: from stock; ready for use
many WILO pumps available from stock Here are some pictures on request noch nie benutzt
ARO PD30A-BSS-STT-C Stainless Steel Double Diaphragm Pump The ARO metallic 3" diaphragm pump models achieve flow rates of up to 1041 L/min. and are available in a variety of materials. These pumps are often used in industry for transfer, filling and recirculation. Diaphragm pumps of the EXP series impress with the best total cost of ownership and offer an optimal solution in terms of energy efficiency and downtime. Example media for PD30A-BSS-STT-C: Highly flammable liquids, mineral oils, varnishes, solvents, acids, alkalis, cleaning agents, wastewater and much more. Suction and Discharge Connection: 3" BSP Max. flow rate: 1041 L/min. Max. operating pressure: 8.3 bar ATEX certified: Yes Material medium side: stainless steel Air motor material: aluminium Membrane material: PTFE / Santoprene Material ball: PTFE Material ball seat: stainless steel Max. solids size: 9.5 mm ...
Rotary vane vacuum pump Manufacturer: Leybold Type: SV 630 B and BF Kat. No.: 960863 & 960867 Voltage: 50/60Hz 400V End pressure: 0.8 hpa(mbar) Status: Generalueberholt Gewaehrleistung: 12 months Including: engine restocking, repainting, electric check delivery time: from stock; ready for use
Manufacturer: Busch Type: Mink MM 1142 BV Motor: DS 400V Suction power: 140 m3/h Final pressure: approx. 60 mbar (abs.) Zubehoer: suction filter; Operating instructions delivery time: short-term; ready for use
Injection pump PS6HL50 As good as new. Spare parts from bench tested Mitsubishi new engines ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
Injection pump PS6HR50 As good as new. Spare parts from bench tested Mitsubishi new engines ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
Wilo DL-E 100/145-11/2-S1 Dry Runner Double Pump Dry-running double pump in inline design for pipe installation or foundation installation with integrated frequency converter for electronic control for constant or variable differential pressure (Δp-c/Δp-v), among other things. Design Electronically controlled dry rotor double pump in inline design with flange connection and automatic power adjustment Application Pumping of heating water (according to VDI 2035), cold water and water-glycol mixtures without abrasive substances in heating, cold water and cooling systems. Features/Function Modes Δp-c for Constant Differential Pressure Δp-v for Variable Differential Pressure PID Control Actuator operation (n=constant) Hand control level Setting the differential pressure setpoint Setting the speed (manual operation) Setting the operating mode Pump ON/OFF adjustmen ...
Injection pump PS6HL50 As good as new. Spare parts from bench tested Mitsubishi new engines ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
Coolant pump ET No.: 37545-80011 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us
Attachment: eccentric screw pump Manufacturer: Netzsch Type: NE 69 A Machine number: 253233 Year of construction: 1994 Capacity: 25m 3/h Engine: Dietz KW: 5.5 Voltage: 400V Connection suction side: DN 100 Port side: DN 100 Length: 2300 mm
Rotary vane vacuum pump Manufacturer: Leybold Type: Sogevac SV280 Status: used, tested! Maintenance for the geraet is offered separately! Inclusive: Oil filling delivery time: from stock!; ready for use
Machine: eccentric screw pump Manufacturer: Netzsch Type: 3 NE 08 Machine number: 253173 Year of construction: 1994 Capacity: approx. 300 l / h Engine: Dietz Drezhal: 1390 RPM KW: 0.55 Voltage: 400V Connection suction side: 3/4 inch Connection pressure side: 3/4 inch Length: 800 mm
Waelz piston pump (roots blow- Manufacturer: Pfeiffer Type: WKP 500 A Suction moulds: approx. 500 m3/h Cat. Nr.: PP W31 001 Status: Generalueberholt Gewaehrleitung: 12 months Including: oil filling, operating instructions; ready to use
Manufacturer: Busch Type: Mink MI 1502 BV Engine: 9.2 KW ; DS 400V Status: Used, Partial overtaking Performance: 6 months Suction power: 500 m3/h final pressure: approx. 250 mbar (abs.) Geraeusch Level: 85 dBa Zubehoer: additional suction filter (changed) ; Operating manual Delivery time: approx. 1-2 Where.; ready for use
Waelz piston pump (rootsblowesis) Manufacturer: Pfeiffer Type: WKP 2000 A Suction suction systems: approx. 2065 m3/h engine: 5.5 KW Cat. Nr.: PP W61 000 Status: Generalueberholt Gewaehrleitung: 12 months Including: oil filling, user manual; ready to use
Rotary vane vacuum pump- packaging- Manufacturer: Busch Type: 220-80 Vacuum: 0.5 mbar Status: used, tested! Maintenance for the geraet is offered separately! Inclusive: Oil filling delivery time: from stock!; ready for use
Rotary vane vane vacuum pump- packaging Manufacturer: Busch Type: CB0251B Vacuum: 0.5 mbar Status: used, tested! Maintenance for the geraet is offered separately! Inclusive: Oil filling delivery time: from stock!; ready for use
Umwaelz pump heating pump pump new and unused, ovp 1 pcs Grundfos UPC 50-120 3-400Volt 50Hz Special price Special price
Claw vacuum pump dry Manufacturer: Busch Type: Mink MM 1322 AV Motor: DS 400V Suction power: 300 m3/h End pressure: approx. 150 mbar (abs.) Performance: 12 months Condition: New ashoer: suction filter; Operating instructions Delivery time: short-term; ready for use
Claw vacuum pump dry manufacturer: Busch Type: Mink MM 1252 AV Motor: DS 400V Suction power: 250/300 m3/h final pressure: approx. 100 mbar (abs.) Zubehoer: suction filter; Operating instructions Delivery time: short-term; ready for use
Vacuum pump Manufacturer: Kinney Type: KT-505 LP Status: used ; ready for use
Pump: centrifugal pump Manufacturer: Varisco Type: J40/J1-110 Year of construction: 2002 Capacity: 10 m3 / 13m / - 20 m3 Engine: Siemens KW: 1.1 Voltage: 380 V Speed: 2850 RPM Connection inlet DN 40 Port side: DN 40 Machine number: 107921 Dimensions: length 700 mm Product-contacting parts: stainless steel
System: diaphragm pump Type: LEWA G3H M511S Gr. 30 Description: with diaphragm pump head, material stainless steel Year of construction: 2002 / refurbished 2008 Stroke length: 30 mm Hubfreqquenz: 175 min1 Rod power: 16000 (N) Measuring current at pmax: 170 (ges. 510) l/h Max.Zul. working pressure: 250 bar at least. suction flange pressure: 1.0 bar Connections: Suction and pressure side DN 15 Pump body: Stainless steel 1.4571 Diaphragm: PTFE Guide / ball: 1.4581 / 1.4301 Speed: 1440 RPM Power: 7,5 kw Voltage: 230/400 Technical documents: Yes
Electric pumping system for oil or diesel for controlled extraction of oil quantities from large containers such as oil barrels, tanks, etc. Consisting of electric motor with pump, pressure monitor, hose reel, pump gun with manual pass counter with rigid outlet. Display of the extracted quantity in litres Electric pump for fresh oil supply, suitable for barrel removal or as a tank pump, Closed hose reel for oil, hose length xxm xx" hose, with wall mount and pump gun. Special price
Nominal rating l/h 2000 l/h Motor rating 0,37 (0,5) kW (PS) Connected load 230V 50Hz (single-phase) Electrical protection 16 A Weight 14 kg Material 1.4301 / AISI 304 Pressure max. 1,5 bar / 15m Suction max. 0,5 bar / 5m Connection for juice inlet 1¼ \" Connection for juice outlet 1¼ \" ; new machine - top condition
Self-priming eccentric screw pump including 2/3 hose fitting with nut nut MG90/65 sleeve VA and 2/3 hose fitting with groove nut DN65/65 sleeve VA mounted on a chassis. Technical data: Rated power 4 020 / 8 160 l/h Engine power: Level 1 1.0 (1.36) kW (PS) Level 2 1.9 (2.6) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical protection 16 A Dimensions: Length 1 270 mm Width 500 mm Height 810 mm Weight 57 kg Material 1.4301 / AISI 304 Connections: front MG90 AG top DN65 AG can be used for mash
Self-priming eccentric screw pump including 2/3 hose fitting with nut nut MG90/65 sleeve VA and 2/3 hose fitting with groove nut DN65/65 sleeve VA mounted on a chassis. Technical data: Rated power 9 960 / 19 380 l/h Engine power: Level 1 2.5 (3.4) kW (PS) Level 2 4.2 (5.71) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical protection 16 A Dimensions: Length 1 270 mm Width 500 mm Height 810 mm Weight 90 kg Material 1.4301 / AISI 304 Connections: front MG90 AG top DN65 AG can be used for mash
Self-priming eccentric screw pump including 2/3 hose fitting with nut nut MG90/65 sleeve VA and 2/3 hose fitting with groove nut DN65/65 sleeve VA mounted on a chassis. Technical data: Rated power 840 - 8 100 l/h Engine power 2.2 (3.0) kW (HP) Electrical connection 400V 50Hz (3 phases) Electrical protection 16 A Material 1.4301 / AISI 304 Connections: front MG90 AG top DN65 AG can be used for mash
4 drum pumps; pneumatically operated; suitable for 200L faessers; with base and distribution line.; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.
Manufacturer: Busch Type: Mink MI 1502 BP Engine: 18.5 KW ; DS 400V Status: Used, partial performance: 6 months Volume flow: 500 m3/h compression pressure: +1.2 bar Accessory: additional suction filter (changed) ; Operating manual delivery time: approx. 1-2 Where.; ready for use
maximum number of results exceeded
please refine your search
