1391 offers

maximum number of results exceeded > 1000
please refine your search

Category: 101: boring mills and machining centers
New in: 2014
Price: request quote
Location: Land-CZ Czech Republic, 25219 Rudna
Seller: CEE-Machines

Table clamping surface: 1000 x 460 mm The machine is in good technical condition, by prior arrangement, the opportunity to test. Load pallets of 600 kg start X / Y / Z 800/460/520 mm rapid traverse in X / Y / Z 32/32/32 m / min working speed of 10 m / min line type of linear accuracy of a position is approaching repeatability +/-0.005 accuracy +/-0.002 distance spindle nose 130 to 650 mm from the Surface of the pallet of spindle speed 8000 RPM (optional 12000 rpm) spindle power (over 30 min / permanent) approaches 15/11 kW max. Torque 95 NM Collet cone BBT 40 types tool arm number tools speed tool change (tool / tool) 1.3 sec tool exchange rate (cut / cut) of 3.6 sec machine length 2450 mm  ...

Category: 101: boring mills and machining centers
New in: 1985
Price: request quote
Location: Land-CZ Czech Republic, 25219 Rudna
Seller: CEE-Machines

The machine is in good technical condition, by prior arrangement, the opportunity to test. quiet operation, bed unpunished since 1986 was in the tool Department, where it only dirty, in 1997, the purchase was commissioned taken until 1998 only as a drilling machine in operation, fully functional reading, the spindle MORSE 6 wedged without hydration. lots of accessories two full boxes of 800x1200x800mm

Category: 101: boring mills and machining centers
New in: 2003
Price: request quote
Location: Land-in IN
Seller: GINDUMAC GmbH

OVERVIEW: Brand: Leadwell Model: V-40 Application type: Milling Machine type: Machining Center (Vertical) Availability: Immediately Construction year: 2003 Production hours: 32500 Location: India Origin country: Taiwan GENERAL DATA: Measurements width: 2990 mm Measurements depth: 2250 mm Measurements height: 2600 mm Machine weight: 5000 kg MAIN DRIVE: Number of spindle: 1 Spindle speed range: 8000 1/min CONTROL UNIT: Brand: Fanuc Model: Series 21-M CNC main language: English MOVEMENT: X-AXIS movement: 1020 mm Y-AXIS movement: 510 mm Z-AXIS movement: 510 mm A-AXIS movement: 110 mm TABLE: Outer length: 1200 mm Outer width: 500 mm TOOLS: Max weight: 7 ...

Category: 101: boring mills and machining centers
New in: 2011
Price: request quote
Location: Land-in IN
Seller: GINDUMAC GmbH

OVERVIEW: Brand: Hurco Model: VMX 64 Application type: Milling Machine type: Machining Center (Vertical) Availability: Immediately Construction year: 2011 Production hours: 17500 Location: India Origin country: Taiwan GENERAL DATA: Measurements width: 4100 mm Measurements depth: 4400 mm Measurements height: 3430 mm MAIN DRIVE: Number of spindle: 1 Spindle speed range: 12000 1/min CONTROL UNIT: Brand: Hurco Model: Winmax CNC main language: English MOVEMENT: X-AXIS movement: 1626 mm Y-AXIS movement: 864 mm Z-AXIS movement: 762 mm

Category: 101: boring mills and machining centers
New in: 1999
Price: request quote
Location: Land-hr HR
Seller: GINDUMAC GmbH

OVERVIEW: Brand: HAAS Model: VF-4 Application type: Milling Machine type: Machining center (vertical) Availability: Immediately Construction year: 1999 Production hours: 36450 Location: Croatia Origin country: USA GENERAL DATA: Measurements width: 3600 mm Measurements depth: 3200 mm Measurements height: 3000 mm Machine weight: 6000 kg MAIN DRIVE: Number of spindle: 1 Spindle speed range: 7500 1/min CONTROL UNIT: Brand: HAAS CNC main language: English MOVEMENT: X-AXIS movement: 1270 mm Y-AXIS movement: 508 mm Z-AXIS movement: 635 mm WORKPIECE: Workpiece weight: 1600 kg TABLE: Outer length: 1320 mm Outer width: 457 mm TOOLS: Max weight: 5.4 kg Max ...

Category: 101: boring mills and machining centers
New in: 2017
Price: request quote
Location: Land-tw TW
Seller: GINDUMAC GmbH

OVERVIEW: Brand: Leadwell Model: V-30iF Application type: Milling Machine type: Machining Center (Vertical) Availability: immediatily Construction year: 2017 Production hours: 0 Location: Germany Origin country: Taiwan GENERAL DATA: Measurements width: 2170 mm Measurements depth: 2250 mm Measurements height: 1810 mm Machine weight: 3700 kg MAIN DRIVE: Number of spindle: 1 Spindle speed range: 12000 1/min CONTROL UNIT: Brand: Heidenhain Model: TNC 620 MOVEMENT: X-AXIS movement: 800 mm Y-AXIS movement: 460 mm Z-AXIS movement: 510 mm TABLE: Outer length: 860 mm Outer width: 450 mm TOOLS: Max weight: 7 kg MEDIA: Main electronic connection: 400 Pow ...

Category: 101: boring mills and machining centers
New in: 2016
Price: request quote
Location: Land-tw TW
Seller: GINDUMAC GmbH

OVERVIEW: Brand: Leadwell Model: V-30iF Application type: Milling Machine type: Machining Center (Vertical) Availability: immediatily Construction year: 2016 Production hours: 0 Location: Germany Origin country: Taiwan GENERAL DATA: Measurements width: 2170 mm Measurements depth: 2250 mm Measurements height: 1810 mm Machine weight: 3700 kg MAIN DRIVE: Number of spindle: 1 Spindle speed range: 12000 1/min CONTROL UNIT: Brand: Heidenhain Model: TNC 620 MOVEMENT: X-AXIS movement: 800 mm Y-AXIS movement: 460 mm Z-AXIS movement: 510 mm TABLE: Outer length: 860 mm Outer width: 450 mm TOOLS: Max weight: 7 kg MEDIA: Main electronic connection: 400 V P ...

Category: 1300: other machines and plants
New in: 1995
Price: request quote
Location: Land-kr KR
Seller: BMJ KOREA

CNC HEAVY LATHE(2500mm X14000mm) Make: RAVENSSBURG(Germany) Year:1995 Max. turning-Ø above carriage 2500 mm Max. turning-Ø above bed 3000 mm Max. centre height over floor 2410 mm Max. centre height over bed ways 2000 mm Max. distance between centres 14000 mm Load capacity between centres 80000 kg Load capacity with steady rests 125000 kg Machine weight approx. 350 t Size of carriage bed 1800 x 1000 mm Size of slide bed 1600 x 800 Control Siemens Sinumerik 880 T Power required 315 kW Spindle boring-Ø 150 mm 4 Main spindle drives 1-200 RPM Main drive (d.c. motor) 200 kW/910 RPM Max. torque of faceplate 100 000 Nm Faceplate ...

Category: 102: lathes
New in: 1995
Price: request quote
Location: Land-kr KR
Seller: BMJ KOREA

CNC HEAVY LATHE(2500mm X14000mm) Make: RAVENSSBURG(Germany) Year:1995 Max. turning-Ø above carriage 2500 mm Max. turning-Ø above bed 3000 mm Max. centre height over floor 2410 mm Max. centre height over bed ways 2000 mm Max. distance between centres 14000 mm Load capacity between centres 80000 kg Load capacity with steady rests 125000 kg Machine weight approx. 350 t Size of carriage bed 1800 x 1000 mm Size of slide bed 1600 x 800 Control Siemens Sinumerik 880 T Power required 315 kW Spindle boring-Ø 150 mm 4 Main spindle drives 1-200 RPM Main drive (d.c. motor) 200 kW/910 RPM Max. torque of faceplate 100 000 Nm Faceplate ...

Category: 1300: other machines and plants
New in: 2009
Price: request quote
Location: Land-kr KR
Seller: BMJ KOREA

PIPE and H-BEAM Bending Machines 1.PIPE BENDING M/C Make:Donguk(Korea) Year:2009 Model:DK-HFB-600AM Work Size:?216.3~?609.6mm HEATER:300kw 2.PIPE BENDING M/C Make:Donguk(Korea) Year:2009 Model:DK-HFB-750AM Work Size:?508.0~?762.0mm HEATER:400kw 3. H-BEAM BENDING M/C Make:Donguk(Korea) Year:2009 Model:DK-HB-H400 Work Size: Horizontal H200×100mm-H400×400 x13/21 Vertical H125×125mm-H600×200x11/17 4. I-BEAM BENDEING M/C Make:Donguk(Korea) Year:2009 Model:DK-HB-I400 Work Size: I 900×300 below( Vertical) 5. CNC PIPE COASTER Make:Donguk(Korea) Year:2009 Model:PC-OT3600-N Cutting metho ...

Category: 107: sheet metal working
New in: 2009
Price: request quote
Location: Land-kr KR
Seller: BMJ KOREA

PIPE and H-BEAM Bending Machines 1.PIPE BENDING M/C Make:Donguk(Korea) Year:2009 Model:DK-HFB-600AM Work Size:?216.3~?609.6mm HEATER:300kw 2.PIPE BENDING M/C Make:Donguk(Korea) Year:2009 Model:DK-HFB-750AM Work Size:?508.0~?762.0mm HEATER:400kw 3. H-BEAM BENDING M/C Make:Donguk(Korea) Year:2009 Model:DK-HB-H400 Work Size: Horizontal H200×100mm-H400×400 x13/21 Vertical H125×125mm-H600×200x11/17 4. I-BEAM BENDEING M/C Make:Donguk(Korea) Year:2009 Model:DK-HB-I400 Work Size: I 900×300 below( Vertical) 5. CNC PIPE COASTER Make:Donguk(Korea) Year:2009 Model:PC-OT3600-N Cutting metho ...

Category: 103: milling machines
New in: 1975
Price: request quote
Location: 63322 Rödermark
Seller: Mieth Maschinenhandel

Technical data: -Table size 1600 x 370 mm -Work area of the axles -X (longitudinal) 1000 mm -Y (transverse) 320 mm -Z (vertical) 420 mm -Milling head left + right Tilt + Swivel - 9 table feeds 20-800 mm / min -Rapid traverse longitudinal / transverse 3000 mm/min -Rapid traverse vertical 1375 mm / min -maximum distance spindle - top 480 mm -min / max distance spindle Center / stand 450 mm -Tool holder ISO 50 - work spindle speeds in 12 levels adjustable 45-1400 RPM - coolant system - powered 400 V / 5,8 kW -Space requirement approx. B H 2100 x 2200 x D 2800 mm -Weight approx. 3500 kg

Category: 101: boring mills and machining centers
New in: 2001
Price: request quote
Location: 63322 Rödermark
Seller: Mieth Maschinenhandel

Technical data: -Drilling capacity in steel ST 60 50 mm -Drilling capacity in steel ST 60 55 mm -Spindle mount MT 4 -Drilling spindle stroke 200 mm -RADIUS 370 mm -Table with 2 T-slots with hand crank height adjustment -Dimensions 560 x 480 mm - min / max distance table / spindle 120 / 770 mm -Column diameter 200 mm -Feeds electromagnetically 0.1 - 0.2 - 0.3 mm / Rev with overload protection -Spindle speed continuously in 3 steps/30-1900 rpm -Drive 400 V / 4.1 kVA -Space requirement approx. B H 700 x 2170 X 1200 mm -Weight approx. 750 kg -with:-thread cutting device -Coolant system -digital display of spindle speed -Machine vise

Category: 101: boring mills and machining centers
New in: 1988
Price: request quote
Location: 63322 Rödermark
Seller: Mieth Maschinenhandel

Technical data: -Drilling capacity in steel ST 60 50 mm -Spindle mount MT 4 -Spindle hub 190 mm -Throat depth 350 mm -Table with 2 T-slots height 560 x 720 mm -max distance table - spindle 780 mm -max distance worked base plate - spindle 1240 mm -Column diameter 160 mm -4 feeds 0.09 - 0.16 - 0.28 mm / Rev -Spindle speed continuously 50-1800 rpm -Drive 400 V / 3,7 kW -Coolant system -Space requirement approx. B H 850 x 1980 X 1050 mm -Weight approx. 750 kg

Category: 101: boring mills and machining centers
New in: 1996
Price: request quote
Location: 63322 Rödermark
Seller: Mieth Maschinenhandel

Technical data: -Drilling capacity in steel ST 60 25 mm -Spindle mount MT 3 8 spindle speed 100 2700 RPM - spindle stroke 130 mm -4 feeds 0.1-0.3 m / U -RADIUS 270 mm -Column diameter 115 mm -Boring Unit + table height adjustable with hand crank on rack -Table dimensions 350 mm -Drive: 400 V / 0.8 / 1.1 kW -Space requirement approx. B H 800 x 1850 X 900 mm -Weight approx. 250 kg

Category: 101: boring mills and machining centers
New in: 1997
Price: request quote
Location: 63322 Rödermark
Seller: Mieth Maschinenhandel

Technical data: -Drilling capacity in steel ST 60 50 mm -Drilling capacity up to 60 mm -Thread cutting device up to 45 M -4 feeds 0.06; 0.09; 0.15; 0.25 mm / Rev -Spindle mount Mt 5 -Drilling spindle stroke 200 mm -Spindle speed continuously 66-1400 RPM -RADIUS 325 mm -Table with 2 T-slots 650 x 550 mm -Height-adjustable via rack and pinion with hand crank -max distance spindle to table top 770 mm -Coolant system -Drive: 400 V / 1.3 / 2.3 kW -Space requirement approx. B 600 x H 2100 X 950 mm -Weight approx. 700 kg

Category: 101: boring mills and machining centers
New in: 1970
Price: request quote
Location: 63322 Rödermark
Seller: Mieth Maschinenhandel

Technical data: -Drilling capacity 75 mm -RADIUS min. / max. 500 / 2000 mm -Spindle mount Mt 6 -Drilling spindle stroke 450 mm -Spindle speeds 20 steps 12-1600 rpm -Right rotation -Feed, 18 steps 0.056 3.1 mm/U - drive 400 V / 7.5 kW -Clamp the boom and electromechanical drill unit -min / max distance machine bed - drilling tailstock sleeve 450 / 1800 mm -usable machine bed with 4 T-slots 1250 x 2100 mm -Coolant system -Cube table - space requirement approx. B 3500 x H 3600 x T 1500 mm - weight approx. 10000 kg

Category: 101: boring mills and machining centers
New in: 1992
Price: request quote
Location: 63322 Rödermark
Seller: Mieth Maschinenhandel

Technical data: -Drilling capacity in steel ST 60 32 mm -Thread cutting device up to M 20 -Spindle mount MT 3 -Feed 0.1 + 0.2 + 0.3 mm / Rev -Drilling spindle stroke 150 mm -12 spindle speeds 80-1400 RPM -Extension 280 mm -max distance table - spindle 760 mm -Table with 2 T-slots 550 x 400 mm -Height-adjustable via rack and pinion with hand crank -Drive: 400 V / 1.4 / 2,3 kW -Space requirement approx. B H 550 x 1950 X 850 mm -Weight approx. 360 kg -with: - coolant system - drill Chuck 3-13 mm -20 St. HSS div. Drill 8-25 mm

Category: 101: boring mills and machining centers
New in: 2006
Price: request quote
Location: 63322 Rödermark
Seller: Mieth Maschinenhandel

Technical data: -Drilling diamond drilling into glass about 5 to 100 mm -Spindle mount MT 4 -8 spindle speeds in 2 stages 440-5300 RPM -Drilling spindle stroke 100 mm -RADIUS 270 mm -Table size 600 x 600 mm -Table spraying water border H 300 mm -mot. Table height adjustment -maximum distance table - spindle mm -400 V / 3 kW Emergency stop button -Coolant system with continuous + interval setup -Water supply through hollow spindle -Vacuum pump - separate drawer cabinet with various accessories -Space requirement approx. B H 850 x 2200 X 1200 mm -Weight approx. 900 kg

Category: 101: boring mills and machining centers
New in: 1990
Price: request quote
Location: 63322 Rödermark
Seller: Mieth Maschinenhandel

Technical data: -Drilling capacity in steel ST 60 approx. 55 mm -Drilling drilling on about 80 mm -Tapping up to approx. M 40 -Spindle mount Mt 5 -Drilling spindle stroke 240 mm -RADIUS min. / max. 320 / 2005 mm -Column diameter 360 mm -Lift the boom 855 mm -Min. / max - distance: - spindle - base plate approx. 550-1670 mm -worked base plate clamping surface approx. 1000-1700 mm -12 spindle speeds 30-1200 RPM -8 feeds 0.06 1.00 m/U - spindle drive 400 V / 5,5 kW -E - Central clamp - cube table - coolant system - space requirement approx. B 1120 x H x 2750 T 2990 mm - weight approx. 4800 kg

Category: 101: boring mills and machining centers
New in: 1999
Price: request quote
Location: Land-nl NL Zevenbergen
Seller: Mamach Machinehandel BV

Mazak Horizontal Machining Centre HTC 400 Control: Mazatrol M-Plus Table size: 400 x 400 mm Number of pallets: 2x Table load: 300 kg X-Axis travel: 560 mm Y-Axis travel: 510 mm Z-Axis travel: 510 mm B-Axis Swivel: 360.000 degrees Spindle taper: CAT 40 Number of tools stored in magazine: 30x Spindle speed: 10.000 RPM

Category: 109: other metal working machines
New in: used
Price: request quote
Location: Land-it IT MONTICHIARI
Seller: EURO MACHINE TOOLS srl

Technical data Spindle diameter: 100 mm (ISO 50) Spindle motor power: 15 Kw Spindle speed range: 2 X Travel: 2000 mm Y Travel: 1100 mm Z Travel: 400 mm W Travel: 1000 mm Table: 1000 mm x 1100 mm Tools changer CNC ICEM

Category: 101: boring mills and machining centers
New in: 1983
Price: request quote
Location: Thüringen
Seller: WTS Maschinenhandels KG

Control SIEMENS 8 CNC HEIDENHAIN measuring spindle diameter 160 mm stand boost to 4700 mm total height of the machine 7220 mm stand bed L 13,000 x B 1700 x 420 mm spindle retainer ISO 50 spindle speeds 3.15-1000 rpm motor capacity 58 kW further data on PDF File that can machine will presented under current

Category: 101: boring mills and machining centers
New in: 2016
Price: request quote
Location: Land-de DE
Seller: GINDUMAC GmbH

OVERVIEW: Brand: Feeler Model: NBP-1000A Application type: Milling Machine type: Machining Center (Vertical) Availability: Immediately Construction year: 2016 Production hours: 0 Location: Germany Origin country: Taiwan GENERAL DATA: Measurements width: 3180 mm Measurements depth: 2185 mm Machine weight: 7000 kg MAIN DRIVE: Number of spindle: 1 Spindle speed range: 10000 1/min CONTROL UNIT: Brand: SIEMENS Model: SINUMERIK 828D MOVEMENT: X-AXIS movement: 1000 mm Y-AXIS movement: 610 mm Z-AXIS movement: 600 mm TABLE: Outer length: 1150 mm Outer width: 600 mm TOOLS: Max weight: 8 kg Max tool diameter: 80 mm Max tool length: 300 mm MEDIA: Main elect ...

Category: 101: boring mills and machining centers
New in: 1991
Price: request quote
Location: 63322 Rödermark
Seller: Mieth Maschinenhandel

Technical data: -Drilling capacity 60 mm -Throat depth 1600 mm -Spindle mount Mt 5 -Spindle hub 390 mm -Spindle speeds, 20 levels 20-2000 RPM -Right rotation -Feed, 12 steps 0.056 2.5 mm/U - drive 400 V / 12.8 kW -Clamp the boom and electromechanical drill unit -Distance from wrought bed - boring Quill - min approx. 900 mm -max approx. 1600 mm -usable machine bed with 4 T-slots 950 x 1700 mm -Coolant system -Cube table - space requirement approx. B 2600 x H 3000 x T 1000 mm - weight approx. 4500 kg

Category: 101: boring mills and machining centers
New in: 2001
Price: request quote
Location: Land-es ES
Seller: GINDUMAC GmbH

OVERVIEW: Brand: MILLTRONICS Model: VM 17 Application type: Milling Machine type: Machining Center (Vertical) Availability: Immediately Construction year: 2001 Location: Spain Origin country: USA GENERAL DATA: Measurements width: 2300 mm Measurements depth: 1900 mm Measurements height: 2750 mm Machine weight: 2800 kg MAIN DRIVE: Number of spindle: 20 CONTROL UNIT: Brand: MILLTRONICS Model: Centurion 6 MEDIA: Main electronic connection: 230 V / 50 Hz Power consumption: 6.9 kVA

Category: 101: boring mills and machining centers
New in: 1984
Price: request quote
Location: 63322 Rödermark
Seller: Mieth Maschinenhandel

Technical data: -Drilling - in steel 18 mm -in aluminium 23 mm -Spindle mount MT 2 - drilling depth 100 mm -Unloading spindle / column 250 mm -5 drill spindle speed 340-2400 R/min -Drive 400V / 0.75 kW -height-adjustable table 330 x 280 mm -Distance from spindle / table approx. 330 mm -Distance from spindle / base plate approx. 510 mm -Space requirement approx. B 350 x H 990 x H 600 mm -Weight approx. 150 kg -Keyless drill Chuck 1-13 mm -Machine frame B H 700 x 880 x H 900 mm

Category: 101: boring mills and machining centers
New in: used
Price: request quote
Location: Land-pt PT Marinha Grande
Seller: occasionmachines

Category: 101: boring mills and machining centers
New in: used
Price: request quote
Location: Land-pt PT Marinha Grande
Seller: occasionmachines

Category: 101: boring mills and machining centers
New in: 1996
Price: request quote
Location: Land-de DE
Seller: Innovac GmbH

Voltage: 400V, nominal current: 60A.

Category: 101: boring mills and machining centers
New in: 1967
Price: request quote
Location: 63322 Rödermark
Seller: Mieth Maschinenhandel

Technical data: -Drilling capacity in steel ST 60 65 mm -Drilling capacity in steel ST 60 75 mm -Spindle mount Mt 5 -Drilling spindle stroke 240 mm -Throat depth 400 mm -Table with 2 T-slots 880 x 670 mm -max distance table - drill bit approx. 860 mm -maximum distance from base plate - spindle approximately 1280 mm -Feed 0.1 - 0.14 - 0.28 - 0.4 mm / Rev -AZ gear continuously variable with manual transmission spindle speeds continuously variable 30-1220 U/min -Drive: 400 V / 3.7 / 5,5 kW -Coolant system - space requirement approx. B H 960 x 2380 X 1680 mm -Weight approx. 1500 kg

Category: 101: boring mills and machining centers
New in: 2008
Price: used machinery auction RESALE 22.500 €
Location: Riga
Seller: Troostwijk Auctions

drilling machine; 3 head drilling; Automatic drill changer for each head; infeed roller conveyor, length 18m; Discharge roller sonderanlagen 18 m, both with side move; dismantled; video available

Category: 101: boring mills and machining centers
New in: 1995
Price: 14.000 €
Location: HAGUENAU
Seller: SOCIETE FIMOTEC

Machining center - vertical DMG DMC 100 V bearing no 1105-02435 category machining center - vertical make DMG type DMC 100 V model year 1995 State second-hand machine control CNC DIALOG 112 storage France country of origin Germany delivery A UF request cargo base EX WORK further details on request technical details x way 1000 mm y-way 800 mm z trail 500 mm table size 1250 x 800 mm control DIALOG 112 speed 10000 1/min recording ISO SK 40 rapid 50 m / min tool changer 30 ABM aluminium L W H 3,900 x 4,100 x 3,000 mm description CNC control DIALOG 112 30-fach tool changer Rinse-gun spindle 10000 RPM SK 40 HEIDENHAIN LINEAR MASTAEBE

Category: 101: boring mills and machining centers
New in: 1977
Price: request quote
Location: 63322 Rödermark
Seller: Mieth Maschinenhandel

Technical data: -Drilling capacity in steel ST 60 40 mm -Drilling capacity in steel ST 60 50 mm -Spindle mount MT 4 -Drilling spindle stroke 200 mm -Spindle speed continuously adjustable 60-765 U/min - projection 330 mm -3 feeds 0.1 - 0.2 - 0.3 U/min -Table with 2 T-slots 740 x 590 mm -height-adjustable via rack and pinion with hand crank -maximum distance table - drill bit approx. 780 mm -maximum distance worked base plate - spindle mm 1250 -Coolant system -Lighting -ca. 20 St. used HSS drill bit approx. 8 to 25 mm -Machine vise -Drive: 400 V / 2,3 / 3,4 kW -Space requirement approx. B 750 x H 2150 X 1150 mm -Weight approx. 750 kg

Category: 205: boring mills, machining centers
New in: 1993
Price: 1.596 €
Location: Weilheim Teck
Seller: A-Z Maschinenwelt

Technical data: Brand: Würth Type: II Year: 1993 Number of spindles: 9 PCs Pitch: 32 mm Drill: clamping platen shank: 10 mm Operation: manual switch Fixed drilling direction: from above Type of material tension: without Version: mobile with Cabinet Stop system: for hole and construction series Power supply approx.: 0.75 kW

Category: 101: boring mills and machining centers
New in: 1995
Price: request quote
Location: Maschinen
Seller: Kurt Steiger Werkzeugmaschinen GmbH

Table size: 1000 x 490 mm traverse path x/y/z: 800/510/500 mm spindle retainer: ISO 40 ISA kl. / gr. Table/spindle distance: 120/620 mm spindle speeds: 40-6000 rpm number of tool stations: 22 pieces feeds: x/y 1-3200 / z 1-2000 mm / min rapid traverse: x/y 1-3.2, z 1-2 m / min. Supply: 380 V, 19 kW space: 2850 x 2150 x 2600 mm weight: 3800 kg

Category: 101: boring mills and machining centers
New in: 1991
Price: request quote
Location: 63322 Rödermark
Seller: Mieth Maschinenhandel

Technical data: -Drilling capacity in steel ST 60 40 mm -Thread cutting device up to 40 M -Spindle mount MT 4 -Drilling spindle stroke 200 mm -Spindle speed continuously adjustable 60-1600 rpm -3 feeds Electr. Magnetic indentation 0,1; 0.16; 0.25 mm / Rev -Throat depth 350 mm -maximum distance spindle - table 750 mm -Gliding stage table with 3 T-slots 760 x 425 mm -Displacement along 400 mm -200 mm, transverse displacement -Drive: 400 V / 1.1 / 1.8 kW -Space requirement approx. B H 600 x 1950 X 980 mm -Weight approx. 900 kg -with:-keyless drill Chuck 1-13 mm Emergency stop button -Lighting -Coolant system -E. - Hydr. Machine vise RÃ?HM  ...

Category: 101: boring mills and machining centers
New in: 1997
Price: request quote
Location: 63322 Rödermark
Seller: Mieth Maschinenhandel

Technical data: -Drilling capacity in steel ST 60 32 mm -Drilling capacity in steel ST 60 36 mm -Spindle mount MT 3 -Drilling spindle stroke 160 mm -Feeds electronic 32-320 mm / min -Spindle speed infinitely variable 100-2000 RPM -Digital speed display + drilling depth indicator -RADIUS 300 mm -max distance table - spindle 560 mm -max distance Footplate drill 1150 mm -Table with 2 T-slots 590 x 450 mm Height adjustment via rack and pinion with hand crank -Drive: 400 V / 1.5 / 3 kW -Space requirement approx. B 750 x H T 1980 x 960 mm -Weight approx. 360 kg

Category: 101: boring mills and machining centers
New in: 1981
Price: request quote
Location: 63322 Rödermark
Seller: Mieth Maschinenhandel

Technical data: -Drilling capacity in steel ST 60 65 mm -Drilling drilling in steel 90 mm -Thread cutting device in steel up to M 60 mm -Spindle mount Mt 5 -Drilling spindle stroke 400 mm -Unloading min / max approx. 570 / 2400 mm -Lift the boom 850 mm -min / max - distance: - spindle - base plate approx. 890-1740 mm -the processed baseplate mounting area B T 1400 - 2300 mm -Spindle speed 30-1400 RPM -Right - left rotation -12 feeds 0.075 1.00 mm / Rev -E. Central clamp spindle drive 400 V / 7.5 kW -Cube table - vise -Coolant system - space requirement approx. B 1400 x H 3000 / 3900 X 3750 mm - weight approx. 8000 kg

Category: 101: boring mills and machining centers
New in: 1979
Price: request quote
Location: 63322 Rödermark
Seller: Mieth Maschinenhandel

Technical data: -The full steel ST 60 drilling power 35 mm -Drilling capacity GG 25 40 mm -Tapping ST 60 M 27 -Spindle mount MT 3 -Spindle diameter 35 mm -Quill diameter 75 mm -Quill stroke 200 mm -9 spindle speed 125-2000 R/min -6 drill feeds 0.06 - 0.6 mm / U - Min / max distance spindle - table approx. 300 / 700 mm -Drilling RADIUS min / max approx. 140 / 750 mm -Table height min. / max. 600 / 1050 mm -Table size approx. 1000 x 650 mm -Drive 400 / 500 V / 3 kW -Space requirement approx. B 1200 x H 2500 / 2600 X 2100 mm -Weight approx. 1900 kg -with:-thread cutting device -hydr. Columns + bracket clamp -Coolant system -Central lubrication

Category: 101: boring mills and machining centers
New in: 2003
Price: 91.000 €
Location: HAGUENAU
Seller: SOCIETE FIMOTEC

Machining center - vertical MORI SEIKI GM 503 bearing no 1105-02433 category machining center - vertical make MORI SEIKI type GM 503 built in 2003 State second-hand machine control CNC MSC 809 storage HAGUENAU country of origin Japan delivery sofo RT cargo base from site technical details x path 610 mm y-way 710 mm z-way 460 mm control MSC 809 distance from table surface to spindle Center 150-610 mm table: size 550 X 750 mm of work piece weight 300 kg max number of T-grooves 6 T-slots - width 18 mm T slot distance 100 mm main spindle speed 20000 rpm number of spindle speed ranges 1 taper BT 40 spindle diameter in the vord. Camp 85 mm feed rapid traverse x 42 m/min feed rate 0.001-16 m / mi ...

Category: 101: boring mills and machining centers
New in: 1995
Price: request quote
Location: 63322 Rödermark
Seller: Mieth Maschinenhandel

Technical data: -Drilling capacity - steel 15 mm -in aluminium 18 mm -Recording of Chuck ø 1-13 mm -Drilling depth 70 mm -Unloading spindle / column 180 mm -Spindle speed 480-4000 R/min -Drive 400 V 0,45 kW -height-adjustable table 230 x 170 mm -Distance from spindle / table max. 160 mm -Distance from spindle / base plate max. 300 mm -Space requirement approx. B 280 x H 850 X 600 mm -Weight approx. 100 kg -with - keyless drill Chuck 1-13 mm -Machine vise -20 St. HSS drill bits 5-13 mm

Category: 101: boring mills and machining centers
New in: 2014
Price: request quote
Location: Kassel
Seller: RUDOLF BANDMANN WERKZEUGMASCHINEN e.K.

gebr. Column drilling machine make BERNARDO Model GB 40 Vario. No.: 2610261 year of 2014 Drilling capacity: Steel 40 mm Cast iron 45 mm Threading up to 32 M Dome MK 4 Spindle speed / 2 steps continuously variable 60-400 / 392-2600 RPM Feed range 0.1 / 0.2 / 0.3 / 0.4 mm / Rev Throat depth 340 mm Distance: Spindle / table 610 mm Spindle / base plate 1195 mm Quill stroke 190 mm Säulen-Ã? 140 mm Table size / T - slot size 540 x 440 mm / 14 mm Work area 400 x 410 mm base plate Motor 2.0 kW External dimensions: Width 700 mm Depth 950 mm 2340 mm Weight approx. 600 kg Facilities: infinitely variable speed control, timer Speed can be r ...

Category: 101: boring mills and machining centers
New in: 2014
Price: request quote
Location: Kassel
Seller: RUDOLF BANDMANN WERKZEUGMASCHINEN e.K.

gebr. Column drilling machine make BERNARDO Model GB 32 SV. No.: 1401001 year of 2014 Drilling performance steel 32 mm Spindle mount MT 4 Quill stroke 130 mm Table size 470 x 400 mm 3 spindle feeds 0.12 / 0.19 / 0.26 mm / Rev Throat depth 272 mm Distance: Spindle / table max 790 mm Spindle / bottom panel 1220 mm Säulen-Ã? 115 mm 12 spindle speeds 50-2520 RPM Motor 0.85 / 1,1 kW External dimensions: Width 660 mm 710 mm deep Height 2050 mm Weight approx. 315 kg With: coolant pump Right link turn Keyless chuck 3-16 mm

Category: 101: boring mills and machining centers
New in: 1988
Price: request quote
Location: 63322 Rödermark
Seller: Mieth Maschinenhandel

Technical data: -Drilling capacity in steel St 60 45 mm -Drilling capacity in steel St 60 55 mm -Spindle recording long spindle MK 4 -AZ gear infinitely variable spindle speeds -in 2 speed series 50-840 RPM -Drilling spindle stroke 140 mm -RADIUS 300 mm -Column diameter 145 mm -Table with 2 T-slots 460 x 420 mm -Distance from table spindle min / max 35 / 640 mm -Stood at Quill - worked base plate approx. 1150 mm -3 feeds 0.10 - 0.20 mm / Rev -Drive: 400 V / 1.8 / 2.9 kW -Keyless drill Chuck -Space requirement approx. B 600 x H 1800 X 950 mm -Weight approx. 380 kg

Category: 101: boring mills and machining centers
New in: used
Price: request quote
Location: Land-it IT MONTICHIARI
Seller: EURO MACHINE TOOLS srl

Long.travel.mm.1500 Cross travel.mm.2000 Vert.travel.mm.1625 Spindle travel mm.700 Spindle diam.mm.105 Spindle speed RPM.12,5/1180 Spindle taper: ISO 50 Rotary table: mm.1220x1524 Table capacity: Kg.5000 Spindle motor: Kw.11 Weight of machine : Kg.16000 Dati non impegnativi da verificarsi / Data must be verify Standard equipment CNC FAGOR

Category: 101: boring mills and machining centers
New in: used
Price: request quote
Location: Land-CZ Czech Republic, 25219 Rudna
Seller: CEE-Machines

The machine is in good technical condition, by prior arrangement, the opportunity to test.

Category: 101: boring mills and machining centers
New in: 1985
Price: request quote
Location: 63322 Rödermark
Seller: Mieth Maschinenhandel

Technical data: -Duration steel St 60 drilling capacity 40 mm GG 25 55 mm -Drilling steel St 60 80 mm GG 25 90 mm -Thread cutting device up to 36 M - tool holder MK 5 -Spindle hub 355 mm -12 spindle speeds stepless adjustable 20-1200 RPM -6 speeds 0.063 - 0.63 mm / U - drive 400 V / 3,9 kW -Unloading min / max 300 / 1250 mm -Distance spindle - worked base plates -min / max 610 / 1320 mm -the machined base plate with T-slots B T 1450 x 920 mm -Electr. Central -Coolant system -Lighting -Cube table - space requirement approx. B 2050 x H 2850 / 3150 x D weight approx. 900 mm- 3200 kg

Category: 101: boring mills and machining centers
New in: 1978
Price: request quote
Location: 63322 Rödermark
Seller: Mieth Maschinenhandel

Technical data: -Drilling capacity in steel ST 60 approx. 50 mm -Drilling drilling on about 80 mm -Tapping up to approx. M 40 -Spindle mount Mt 5 -Drilling spindle stroke 240 mm -Unloading min / max 320 / 1600 mm -Column diameter 360 mm -Lift the boom 900 mm -min. / max - distance: - spindle - base plate approx. 550-1450 mm -worked base plate clamping surface approx. 920-1650 mm -12 spindle speeds 45-2000 RPM -9 feeds 0.05 1,25 m/U - spindle drive 400 V / 5,5 kW -E - Central clamp - coolant system - space requirement approx. B 920 x H 2900 x T 2550 mm - weight approx. 4000 kg

Category: 101: boring mills and machining centers
New in: 2000
Price: request quote
Location: 63322 Rödermark
Seller: Mieth Maschinenhandel

Technical data: -Drilling capacity in steel ST 60 30 mm -Spindle mount MT 3 -Drilling spindle stroke 125 mm -Spindle speed of continuously variable 80 - 3200 RPM -Possibility of thread cutting through re - / left rotation up to M 20 -Throat depth 260 mm -maximum distance table - spindle 825 mm -Table with 2 T-slots 500 x 360 mm -Height-adjustable via rack and pinion with hand crank -Drive: 400 V / 0.8 / 1.5 kW -Space requirement approx. B 500 x H 1900 x H 950 mm -Weight approx. 230 kg -with:-coolant system -Chuck 3-13 mm -20 St. Bohrer 5-20 mm

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)