1000 offers

maximum number of results exceeded > 1000
please refine your search

New in: 2006
Price: request quote
Location: Land-CZ Czech Republic, 25219 Rudna
Seller: CEE-Machines

Spindle diameter: 130 mmDirekt table traverse - X-axis: 3500 mmNacht spindle traction - Y depth: 2500 mmTyp Long Tray - Z axis: 12500 mmMax. Table load: 1800 x 2200 kgDie machine is the ability to test them under current in good technical condition, after agreement. more

New in: used
Price: request quote
Location: Netphen
Seller: RM-Industrieservice Lager und Büro

Drill table with T-slots 24/40 mm Lxwxh 730 x 520 x 590 mm high Side table with T-slots 520 x 340 mm Manual swivel with crank more

New in: 1999
Price: request quote
Location: Salzburg/Austria/Europe
Seller: Gebrauchte Werkzeugmaschinen Feruglio - Used machine tools

MATEC BAZ universal mod 30 HV / 99 / xyz: 2000-600 - 800 / cnc HEIDENHAIN mod. TNC 426 CB / 26,000 hours CA / 5 axis / magazine 24 tray / spindle 15,000 U min / 5° axis Swivel Head 190° / good condition Fe.gi.Maschinen.SBG.at MATEC universal machining center mod 30 HV / year 99 / xyz: 2000-600 - 800 / cnc HEIDENHAIN mod. TNC 426 CB / hours approximately 26,000 / 5 axes / magazine 24 specialist / spindle 15.000 rpm. / 5° axel swivel head 190 ° / good condition Fe.gi.Maschinen.SBG.at more

New in: used
Price: request quote
Location: Land-de DE
Seller: Innovac GmbH

Dilling capacity steel/ cast iron: 45/ 60mm, swing: 300-1250mm, height adjustment: 750mm, rotational speed: 20-1200/min, angle table dimensions: 750x750mm. more

New in: 1990
Price: request quote
Location: Land-de DE
Seller: Innovac GmbH

X-travel: 2500mm, y-travel: 1250mm, z-travel: 800mm, rotational speed: 250-6000/min, clamping surface: 850x1500 600mm, T-grooves: 7x 18H8, T-groove distance: 130mm, number of tool slots: 10, tool mount: ISO SK50, connected load: 25kVA, control: FANUC 0-MF. more

New in: 1993
Price: request quote
Location: Salzburg/Austria/Europe
Seller: Gebrauchte Werkzeugmaschinen Feruglio - Used machine tools

HECKERT BAZ vertical mod. CSK 400 / 93 / xyz: 1600-425-425 / cnc Sinumerik 840 D / 1-40,000 feed / rapid traverse rate 40 m-min. / magazine 32 places 1-8,000 rpm Electronics latest / good condition / / special price Fe.gi.Maschinen.SBG.at HECKERT vertical machining center mod CSK 400 / year 93 / xyz: 1600-425-425 / cnc Sinumerik 840 D / magazine 32 / 1-8,000 rpm / electronics, 1-40,000 feed / rapid traverse 40 m min. up to date / good condition / special price Fe.gi.Maschinen.SBG.at more

New in: 1989
Price: request quote
Location: Land-de DE
Seller: Innovac GmbH

X-travel: 800mm, y-travel: 600mm, z-travel: 600mm, rotational speed: 35-8000/min, rapid traverse: 15000mm/min, feed rate: 5m/min, length: 5810mm, width: 3020mm, height: 3380mm, weight: 15t. more

New in: used
Price: request quote
Location: Land-it IT COLLEGNO (TO)
Seller: B.M. MACCHINE UTENSILI srl

Maximum reach: 1300 mm. Maximum diameter: Ø 40 mm. Cone: 4 CM Locking: Automatic. Power: 4 Hp. Weight: 2650 Kg. more

New in: 1991
Price: request quote
Location: Land-de DE
Seller: Innovac GmbH

X-travel: 630mm, y-travel: 500mm, z-travel: 500mm, pallet dimensions: 400x400mm, feed rate: 1-15m/min, rapid traverse: 15m/min. more

New in: used
Price: request quote
Location: Land-fr FR
Seller: Retec Machines S.A.S

Jig boring machine DIXI type 75 ON Travel X 780 mm Travel Y 680 mm Travel Z 430 mm Travel W Spindle exit: 750 mm Table Rotary table 870 x 700 mm Year of construction 1967 Scale HEIDENHAIN 4 axes Various Delivered with several tools Various Separate electrical panel Voltage 380 V Dimensions (L x W x H) 4200 x 2300 x 2475 mm Weight approx 10 T. MACHINE IN OUR STOCK IN FRANCE. more

New in: 1965
Price: request quote
Location: Land-de Germany, 57080 Siegen
Seller: MPS Frank Müller

Optical coordinates machine for drilling and grinding Manufacturer: Lid Built about 1965 Two heads drilling and grinding are accessories, such as various Schleifstifte, digital display, Loop counter, etc are included. The machine is on the network and in very good condition can be like on appointment be visited on the spot. Contact person Mr. Mueller see also our over 200 more deals at. (Changes and errors in the technical data, information and prices and subject to prior sale!) more

New in: used
Price: request quote
Location: Land-CH Switzerland, 6260 Reiden
Seller: Catalano Werkzeugmaschinen AG

-Accessories available. Coordinate table KS 215 Procedures: X away 280 mm Y away 210 mm Clamping surface of 530 x 255 mm Drilling capacity in steel 18 mm M 14 thread cutting hub of the spindle 110 mm Spindle speeds of 135 - 4'500 rpm Power of spindle motor 0.45/1,1 KW Weight approx. 650 kg with coordinate table & base more

New in: used
Price: request quote
Location: Land-bg BG
Seller: MachTechnica Ltd.

Max. Tool Diameter 120 mm/ 4.72" ISO 50 Pallet Size / Number of Pallets 800x800 mm/ 31.5" x 31.5"/2 plts Spindle Motor 20 HP Spindle Speed 22 - 3600 RPM Table Indexing 1 Degree Indexing Table Load Capacity 1500 kg/2000 kg Tool Magazine Capacity 80 Position ATC X-Axis Travel 1100 mm/ 43.3" Y-Axis Travel 1070 mm/ 42.1" Z-Axis Travel 750 mm/ 29.5" Rotary table (4th axis) more

New in: used
Price: request quote
Location: Land-bg BG
Seller: MachTechnica Ltd.

STEINEL BZ20-1 Horizontal machining center control SINUMERIK System 8 x-travel 560 mm y-travel 450 mm z-travel 450 mm rotary table dia. 270 mm rotary table tiltable 0 - 24 ° spindle taper ISO 30 spindle turning speed range 31,5 - 7100 U/min feed speeds 1 - 10.000 mm/min more

New in: used
Price: request quote
Location: Land-bg BG
Seller: MachTechnica Ltd.

Vertical Machining center CHIRON FZ 16 YOM 1988 Control FANUC 10M Spindle speed 20-6000 rpm Spindle power 5.7 kW Spindle dia 50 mm Tool magazine 32 tool places, SK30 Tool change time: 1 sec. Traverse path X/Y/Z: 500 x 250 x 425 mm more

New in: used
Price: request quote
Location: Land-bg BG
Seller: MachTechnica Ltd.

spindle diameter 125 mm x/y/z/w travel 1120x710x315x630 mm table surface area 900 x 1400 mm table load 2000 kp feed range - boring 0,025-2,24 mm/U turning speed range 36-2240 rpm rapid travel z-direction 2500 mm/min rapid travel w-direction 1400 mm/min more

New in: 1989
Price: request quote
Location: Eersel
Seller: Maschinenhandel Eersel

Mitsui Seiki HS5A horizontal machining center 2 occupied Latvians 630 x 630. X 1000 mm, Y 900 mm, Z 750 mm. FANUC 15 M B axis 360 x 1 gr indexerung spindle: MAS BT50. Hohedruck internal Coolant. Paper band filter system with large cooling tank. Transmission levels spindle 3: L 0-719 omdr, M 500 of 2006 omdr, H 1000-6000 omdr / min. Tool magazine 90stuck. Machinebucher Year of construction 1989 is machine still in operation to see! more

New in: 1991
Price: request quote
Location: Land-pl PL
Seller: Machines4metal

X : 550 mm Y : 300 mm Z : 425 mm Control : Sinumerik 810 Table size : 350 x 950 mm ATC : 12 more

New in: 1997
Price: request quote
Location: Land-pl PL
Seller: Machines4metal

Year : 1997 X : 1100 mm Y : 800 mm Z : 825 mm Control : Mazatrol M Plus Pallet size : 630 x 630 mm Pallets : 2 Spindle taper : SK 50 ATC : 120 Speed ranges : 10000 rpm more

New in: used
Price: 3.500 €
Location: Lüdenscheid
Seller: WTS Maschinenhandels KG

Recording: MK 4 drilling capacity: steel/35/45 mm speed: 40-720 RPM. infinitely adjustable via AZ gearbox, Variator and 2 levels, engine auto. Feed: 0.09 - 0.16 - 0.28 mm / Rev. Spindle stroke: 180 mm maximum distance spindle nose to table: 770 mm throat depth: 345 mm turntable: diameter 560 mm, rotatable table height with hand crank and rack and pinion power: 4 HP volts: 380 V, 16 A dimensions: H 2.05 x B 0.60 x T 1.10 mtr Accessories: new self tension the Chuck cooling lighting connection cable with 16A CEE-plug manual, wiring diagrams machine can be demonstrated under power. more

New in: 1976
Price: 430 €
Location: Langenfeld
Seller: Tischlerei Bracht GbR

Drill motor Scheer BM 602 Engine 1, 8kW 2750 RPM including 21 drill 5mm, pressure reducing valve and foot switch removed from Scheer DB20, drilling machine series Please the PDF file with our terms and conditions and order form. The machine can be demonstrated like by appointment with us on-site. We offer only machines that demonstration ready are available in our warehouse, see "more offers of this provider". more

New in: 2001
Price: request quote
Location: Land-it IT COLLEGNO (TO)
Seller: B.M. MACCHINE UTENSILI srl

Type: tapping machine with rotary table Thread length: 75 mm. Maximum diameter: M 10 ÷ 12 M STEP 1:0.8 0.7 ÷ ÷ ÷ MAX 1.25 Power: 4 kW Weight: 1200 Kg. Dimensions: 1400 x 1200 x 2300 mm. YEAR built: 2001 Notes: Progress through patron-0 ÷ 3000 rpm spindle speed-system lubrication Menzel Accessories: Rotating table with 8 divisions-polygon head OMG T10 to 4 spindles more

New in: 2004
Price: request quote
Location: Land-it IT Calolziocorte
Seller: Industrialbay

2004 Air-water through the spindle PROBE ELECTRONIC THREE-WHEEL control Heidenhain iTNC 530 X axis travel mm 1020 Y axis 600 mm Travel Z-axis 560 mm Table dimensions 1200x635 mm Spindle ISO 40 Giro spindle 10300 rpm 24 tool positions Warehouse Motor power 22 kW NUMBER 10 CHUCK milling more

New in: 1974
Price: request quote
Location: Land-it IT COLLEGNO (TO)
Seller: B.M. MACCHINE UTENSILI srl

Type: tapping machine with rotary table Thread length: 55 mm. Maximum diameter: M 10 ÷ M 14 STEP: 1.25 ÷ 2 Power: 1.5 kW Weight: 360 Kg. Dimensions: 680 x 1800 x 800 mm. YEAR built: 1974 Notes: Progress through patron-spindle speed 0 ÷ 1400 rpm Accessories: Rotating table with 8 divisions-polygon head OMG T4 to 4 spindles more

New in: used
Price: 750 €
Location: Land-nl NL Diepenheim
Seller: BVA Auctions

Auction name: Machine trade in Diepenheim Online auction Start of auction: 09 March 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 19 March 2018 18:45 GMT +0200 (Western Europe (DST) The price listed is an opening bid To participate in the auction and for more information go to: BVA-Auctions more

New in: 2008
Price: request quote
Location: Land-it IT Calolziocorte
Seller: Industrialbay

Very few hours dilavoro Year Built 2008 Longitudinal travel X1626.0 mm Cross travel mm Y1270.0 Vertical travel mm Z813.0 Turntable yes fourth continuous axis. Haas CNC Length mm tavola1626.0 Max. Workpiece weight on the table: 4539 kg Diameter of rotary table: 726 mm Tool magazine 30 positions Spindle taper BT 50 Engine performance delmandrino 24 Kw Spindle speed: 0-6000 / min. Number of motorized axles: 4 Coolant through spindle with high-pressure pump. Automatic doors air operated. Interfaced to work conrobot. Machine dimensions WxDxH: 3099 x 4343 x 3708 mm Conditions EXCELLENT Meets CE requirements Current status under power more

New in: used
Price: request quote
Location: Land-it IT Calolziocorte
Seller: Industrialbay

2000Nr. 2 mm pallets. 500 X 500X axis travel mm. 650Y axis mm. 650Z axis stroke mm. 650RPM 8000Transmission rangeindexed TableChange ISO 40 tool 60 positionsHigh pressure through the spindlechip conveyor more

New in: 2002
Price: request quote
Location: Land-it IT Calolziocorte
Seller: Industrialbay

Year 2002 Giri 12,000 Warehouse 30 seats ISO 40 DIN 69871 Siemens cNC High pressure Fourth axis X-axis stroke 2000 mm Y Axis Stroke 600 mm 600 mm Z-axis stroke more

New in: 2006
Price: request quote
Location: Land-it IT Calolziocorte
Seller: Industrialbay

Corse X: 885 - Y: 600 - Z: 600 Heidenhain control TNC 530 Tool magazine with 30 positions Rapid shifts 100m HSK 63 spindle 28,000 rpm 11,000 hours 2006 more

New in: 1994
Price: request quote
Location: Bad Oeynhausen
Seller: V. Grum-Schwensen GmbH

POS. 1) Dowel boring machine Fabr.: BIESSE Type: Techno logic Year: 04/1994 Working width: 3.200 mm equipped with: 7 supports from below with 2 drilling units 1 right / 1 left horizontal drilling support 2 heads from above with 2 drilling units POS. 2) Dowel boring machine Fabr.: BIESSE Type: Techno logic Year: 04/1994 Working width: 3.200 mm equipped with: 7 supports from below with 2 drilling units 2 heads from above with 2 drilling units 1 right / 1 left horizontal drilling support POS. 3) Dowel boring machine Fabr.: BIESSE Type: Techno logic Year of built: 07/1994 Working width: 3.200 mm equipped with: 6 heads from the bottom with 2 drilling units 1 right  ... more

New in: used
Price: request quote
Location: Land-de DE
Seller: Innovac GmbH

X-travel: 1680mm, y-travel: 380mm, z-travel: 350mm, table dimensions: 4400x420mm, spindle head: SK 40, max. rotational speed: 15000/min, control: SIEMENS Sinumerik, length: 8040mm, width: 2800mm, height: 3100mm, weight: 13t. more

New in: used
Price: request quote
Location: KATOWICE
Seller: Blachmix

MIKRON VCE 600 Pro ROK produkcji: 2003 rok. D2gfe2v X, Y, Z 600 x 500 x 540 mm Arina 10000 (ISO/BT-40) / 18.5 / 149 rpm / kW / NM Posuw roboczy, posuw szybki (X, Y) 40 m / min Posuw roboczy, szybki posuw Z 40 m / min Powierzchnia dociskowa / Maks. zaÅ?adunek 700 x 500 / 800 mm / kg Magazyn narzÄ?dzi 24 / 40 (ISO/BT-40) sztuk Jednostka sterujÄ?ca: HEIDENHAIN iTNC 620 more

New in: 1988
Price: request quote
Location: Bruchsal
Seller: KAI-Tec Technologie-Vertrieb GmbH & Co.KG

COLUMN DRILLING MACHINE ALZMETALL AB 3 ES - 02-04-043 Shipping time: immediately Number: 02-04-043 Manufacturer: Alzmetall Type: from 3 MACHINE DATA Construction year: CA 1988 L x W x h: approx. 600 x 600 x 1800 mm Weight: approx. 400 kg Very good condition TECHNICAL DATA Maximum drilling diameter in steel: approx. Ã? 32 mm Maximum drilling diameter in cast: approx. Ã? 42 mm Chuck: MK 3 Speed range: approx. 130-3500 RPM Throat depth: approx. 290 mm Column diameter: approx. Ã? 120 mm Quill stroke: approx. 180 mm Table size: 510 x 390 mm ACCESSORIES â?¢ Drill Chuck â?¢ Work light â?¢ Complete  ... more

New in: 2000
Price: 18.000 €
Location: HAGUENAU
Seller: SOCIETE FIMOTEC

Machining center - vertical ANAYAK ANAK-MATIC 10 bearing no 1105-02374 category machining center - vertical make ANAYAK type ANAK-MATIC 10 year 2000 State second-hand machine control CNC storage France country of origin Spain delivery time S OFORT freight base EX WORK further details on request technical details x way 1000 mm y-way 500 mm z-way 510 mm spindle carrier BT 40 ISO 40 speed range: 10000 RPM/rpm size 1150 x 475 mm table burden 500 kG capacity tool in the magazine 30 Tool 65 mm rapid traverse 24 m / min description CNC FANUC 18 imb ELECTRONIC HANDWHEEL MAGAZINE 22 SPECIALIST BT 40 10000 RPM 9 KW more

New in: used
Price: request quote
Location: Land-it IT CANTU - COMO - ITALY
Seller: TOMESANI Srl

Code: 0266 Brand: MASTERWOOD Model: FA1 ES -TF Electronic hinge boring inserting machine with milling unit and controlled axis Head inclination 90° Milling unit Hp 1 Loader diameter 14 more

New in: used
Price: request quote
Location: Barntrup
Seller: FWB-Maschinenhandel GmbH

Dowel boring machine of Andrew type boring system 23 top Built in 2006 Boring bar pneumatic swiveling boring bar with 23 spindles, Division 32 mm working width of 704 mm maximum drilling depth 65 mm 2 workpiece holders from above Operating pressure 6-7 bar weight 300 kg more

New in: used
Price: request quote
Location: Land-uk UK
Seller: CNC Management Ltd

Make: Cincinnati Model: 4U Year: NK Condition: Used Machine type: Mill Location of machine: United Kingdom Table size: 200 x 400mm more

New in: 1999
Price: 45.000 €
Location: FRANCE
Seller: SOCIETE FIMOTEC

Machining center - vertical HURCO BMC 64-Nr. 1105-01751 category machining center - vertical make HURCO type BMC 64 year 1999 State second-hand machine control CNC ULTIMAX 4 storage customer country of origin taiwan delivery JULY cargo base free truck, from site further details on request technical details loaded x way 1625 mm y route 860 mm z-way 760 mm table size 1.675 x 890 mm control ULTIMAX 4 spindle speed 6,000 rpm spindle motor 19 kW spindle torque 295 nm Magaz in capacity 32 PCs Recording SK 50 internal coolant supply m/min 20 bar feed description, used vertical machining center with double arm tool changer. -control Ultimax 4 - helicoidal immersion -Double arm tool changer - P ... more

New in: 2009
Price: request quote
Location: Land-pl PL K?odawa
Seller: PPHU Lignum Przemysław Kretowicz

MACHINE DATA Machine type GOMAD WJ 23 multispindle drilling machin Manufacturer gomad Model wj 23 Year of manufacture 2009 Condition excellent (used) PRICE AND LOCATION Location Gorzowska 8, 66-415 K?odawa, PL OFFER DETAILS Listing ID A3671656 Last updated on 05.03.2018 Times Seen 3816 Impressions DESCRIPTION GOMAD WJ 23 multispindle drilling machine Location Gorzów Wlkp. Conditions of delivery OWN RECEIPT Cost of delivery Customer cover Start type to be agreed Description Comments WJ-23 Number of spindles 23 Spacing of extreme spindles 704 mm Spindle spacing 32 mm Table dimensions (width x length) 1200 x 850 mm Height to the ta ... more

New in: 1987
Price: request quote
Location: Land-DE Germany, 73525 Schwäbisch Gmünd
Seller: IDS Trade GmbH

IXION column drill BS-23, built in 1987 more

New in: new
Price: 17.900 €
Location: Land-lt LT Jonava
Seller: MEDIENOS STAKLES, UAB

Type SX1325B-3 Working area 1300x2500x210 mm Platform size 1480x3100 mm Resolutions ±0.05 mm System resolutions ±0.001 Repeat positioning accuracy 0.03 mm Table structure – vacuum adsorption Shaft drive mode – XY axis rack drive Z axis screw drive Shaft power mode – Panasonic servo motor (Z axis with brake functions) Max. traveling speed 35 000 mm/min Max. working speed 20 000 r/min Spindle power 4.5 kW, 6kW Spindle speed 0-18 000 r/min Run command G code Vacuum pump 7.5 kW Voltage AXC380/3HP/50Hz Weight 2000 kg more

New in: 1994
Price: request quote
Location: Salzburg/Austria/Europe
Seller: Gebrauchte Werkzeugmaschinen Feruglio - Used machine tools

EMCO BAZ vertical mod. VMC 300 BJ. 94 / 4 axles / xyz: 420-430-400 / table 850 x 325 / spindle Ã? 60 / 40 SK / feed 12 m-min. / magazine 12 / cnc Siemens 810 M / hours: 85,000 / good condition Fe.gi.Maschinen.SBG.at EMCO vertical machining center mod VMC 300 / year 94 / 4 axes / xyz: 420-430-400 / table 850 x 325 / 60 / SK spindle feed 12 m-min. 40 / magazine 12 tools / cnc Siemens 810 M / hours Ã?: 85,000 / good condition Fe.gi.Maschinen.SBG.at more

New in: 1989
Price: 7.500 €
Location: HAGUENAU
Seller: SOCIETE FIMOTEC

Machining center - vertical BRIDGEPORT INTERACT 720 H bearing no 1105-01286 category machining center - vertical make BRIDGEPORT type INTERACT 720 H year 1989 State second-hand machine control CNC HEIDENHAIN 355 storage France country of origin Delivery time from site further details on request technical details please enquire cargo base x way 760 mm y-way 400 mm z-way 450 mm control HEIDENHAIN 355 kW total power requirements 9 machine weight approx. 3.6 t description tool changer 20 specialist HEIDENHAIN TNC 2500 (TNC 355) 6000 RPM WITH 4 AXIS DIVIDING HEAD more

New in: 2010
Price: request quote
Location: Land-it IT COLLEGNO (TO)
Seller: B.M. MACCHINE UTENSILI srl

Type: CNC SIEMENS 840 D CROSS TRAVEL: 635 mm. LONGITUDINAL TRAVEL: 510 mm. VERTICAL TRAVEL: 450 mm. TABLE DIMENSIONS: 790 x 560 mm. NUMBER of PALLETS: 2 Cone: SK 40 SPINDLE MOTOR POWER: 25 ÷ 35 kW SPINDLE SPEED RANGE: 20 ÷ 18000 rpm TOOL MAGAZINE number: 40 Weight: 5500 Kg. YEAR built: 2010 Notes: Chip conveyor-high pressure 20 bar more

New in: used
Price: 2.689 €
Location: Weilheim Teck
Seller: A-Z Maschinenwelt

Description: They offer funktionsfähigeRadialbohrmaschine the Mark Kolb, which of course quality is 1A here on a super,. It is in good condition. There are small traces of use. This machine provides you with a precise and powerful editing, which can go through many changes of the drill depending on the need. It is sturdy and very stable. A class machine. Technical data: Brand: Kolb Type: NKR 45 Drilling capacity in steel 50 mm Throat depth 1600 mm Drilling slide moveable 1200 mm Tool holder MK 5 Ã? drill: 92 mm Spindle speed range: 34-1500 rpm Speed number: 12 pieces Ã? column: 400 mm more

New in: 2002
Price: request quote
Location: Nordrhein-Westfalen
Seller: W&T EFRA

CNC lathe Contur dialog 800 Year of manufacture 09/2002 Control: Siemens 810 D Rotary diameter 800 mm Centre distance 3000 mm Equipped with Tieflochbohreinrichtung Auxiliary coolant pump 50 bar Support drilling console for the recording of drill rods diameter 100 mm Boring bar for storing Turnplates diameter 100 x 1000 mm Heavy metal - vibration damped boring bars diameter 50 x 650 mm Multi deep hole drill bit diameter 80 x 550 mm Multi deep hole drill bit diameter 70 mm x 450 mm Ready Manual 4-WD holder 24/50 9 piece tool holder WD 24/50 1 piece boring bar holder 4 - jaw Chuck, Rohm diameter 800 mm SCHUNK wedge bar chucks 3-jaw diameter 600 mm 1 Lynette diameter 315 mm  ... more

New in: 2005
Price: request quote
Location: Land-CZ Czech Republic, 25219 Rudna
Seller: CEE-Machines

The machine is in good technical condition, by prior arrangement, the opportunity to test. Only connect delicku.synchrone complete Setup for 4OS fitting, workpiece and ine more

New in: used
Price: request quote
Location: Land-fr FR
Seller: Retec Machines S.A.S

CNC Horizontal boring machine FOREST-LINE type Fimax P150 Travel X 2500 mm Travel Y 2000 mm Travel Z 1800 mm Travel W 500 mm Axe B 360° Spindle Ø 150 mm Table 1600 x 1600 mm Cone ISO 50 Rotation from 10 to 3000 RPM Year of construction 1993 Numerical Command CNC NUM 760 Tool changer 50 tools Spindle motor 40 kW Drilling head Chip conveyor more

New in: 1999
Price: request quote
Location: Land-uk UK
Seller: CNC Management Ltd

Make: Deckel Maho Model: DMC 103 V VMC Year: 1999 Condition: Used Machine type: Other Location of machine: UK Machine Details MAKE DECKEL MAHO, MADE IN GERMANY MODEL DMC 103 V YEAR 1999 CONTROL SIEMENS 810 D TABLE SIZE 1200mm x 600mm TRAVERSES (XYZ) 1000mm x 600mm x 600mm SPINDLE SPEED Upto 8000 RPM SPINDLE TAPER SK 40 ATC 24 STATIONS PLUS VERY LOW HOURS COOLANT SYSTEM FULL SET OF MACHINE MANUALS more

New in: 2000
Price: request quote
Location: Land-uk UK
Seller: CNC Management Ltd

Make: Euma Model: ME-810S Twin Pallet Travelling Column VMC Year: 2000 Condition: Used Machine type: Other Location of machine: UK Machine Details MAKE EUMA MODEL ME-810S YEAR 2000 CONTROL FANUC 18M-C AXIS TRAVEL (X / Y / Z) 810 / 520 / 510 mm DISTANCE SPINDLE NOSE TO TABLE 200 - 710 mm TABLE (LENGTH / WIDTH) 2 x 800 x 600 mm TABLE LOAD 2 x 500 kg RAPID TRAVERSE SPEED (X / Y / Z) 24 / 24 / 20 m / min CUTTING FEED 10 m / min SPINDLE SPEED 8000 revs SPINDLE POWER 7.5 / 11 kw TOOL SHANK BT – 40 TOOL MAGAZINE CAPACITY 24 STATIONS MAX. TOOL DIAMETER (ADJACENT OCCUPIED) 80 mm MAX. TOOL DIAMETER (A ... more

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)