boring and drilling used for sale

Weibert SB 4132SM Box column drill Technical Specification Motor power - W 1500/2200 400V Drilling capacity in mm 32 Spindle stroke in mm 120 Drilling spindle holder MK4 / MT4 Drilling spindle speed in min-1 (24) 60-3480 Column diameter in mm 90 / 2.5 Gross weight in kg 125 GMHM SB4132SM

Machine No.: 405823 Drilling capacity: D25 mm Projection: 255 mm Drilling depth: 135 mm Tool holder: MK3 Engine power: 0.65 / 0.9 kW Speeds: 8 / 105 – 2900 rpm Table: 500x400 mm Weight: 180 kg

Machine No.: 311615 Type: U1 Volt: 380V Power: 3 phase / 50 Hz / 1.5 kW Revolutions: 1415 rpm. Country of origin: Sweden Weight: 310 kg

Machine No.: 306916 Type: U1 Combi Volts: 380 V Power: 3 phase / 50 Hz / 1.5 kW Revolutions: 1415 rpm. Country of origin: Sweden Weight: 760 kg

Model: 25tm Power supply: 380 V / 50 Hz Speeds: 2 Country of origin: Italy

Series No.: 12661418 Year of construction: 10/1998 rpm: 65 – 2000 Cone: MK3 Country of origin: Taiwan

Key data: 25 mm, 225 mm, 150 mm

Drilling capacity steel: ø 25 mm Table dimensions: ø 390 mm Spindle Adapter: MK3 Spindle speeds: 100 - 2900 rpm. Spindle stroke: 150 mm Projection: 225 mm Equipped with: - Drill protection -Drilling Country of origin: Netherlands Motor power: 0.75 kW Machine LxWxH: 700 x 700 x 1800 mm Machine weight: 300 kg

Maximum drilling capacity in steel/casting 63/80 mm The maximum drilling diameter in steel 300 mm leadership Maximum distance spindle axis to the leadership mantle 2000 mm Vertical adjustment arm 950 mm spindle speed - The number of stages 16 - Range from 11 to 2000 /min Main engine power of 5.5 kW Total input 8,5 kVA Weight 7100 kg

Type VR 6A Producer Mas Year of manufacture Max. drilling diameter iron/casting 63/80 mm Max. vertical arm adjustment 950 mm Max. motion of milling head on arm 1613 mm Dimensions l x w x h 3240x1300x3900 mm Machine weight 5800 kg Main motor output 5.5

- Drilling capacity in St 60, 30 mm - Short spindle MK 3 - Spindle stroke 120 mm - Projection 293 mm - Table support 420 x 300 mm, 2 T-slots - Machined base plate 320 x 329 mm, 2 T-slots - Distance base plate - drill chuck 1000 mm - Feed via turnstile - Weight 220 kg - Spindle speed 160 - 2250 rpm. - Operating voltage 380V-50Hz - Infinitely variable speed adjustment, by means of an adjustment lever - Engine speed in 2 stages, 700/1435 rpm - Tapping device with rotation direction change after reaching the end stops - Coolant device fully installed. - Coolant tank in machine base - Work light with LED - RÖHM drill chuck 1 - 16 mm - Precision machine vice new (test winner)

Offer 23380 Specifications: - Drilling capacity in steel ST 60 30 mm - Drilling spindle holder MK 3 - 4 feeds 0.1 - 0.16 - 0.25 - 0.4 mm/rev - Drilling spindle speeds in gear stages 95 - 2000 rpm - Drilling spindle stroke 160 mm - Projection 350 mm - Table with 3 T-slots height adjustable 340 x 320 mm - Table can be tilted left + right -Max. Distance table – drilling spindle 500 mm - Max distance machined base plate – drilling spindle 1050 mm - Column diameter 160 mm -Lighting - Drive 400 V / 2.4 kW - Space requirement approx. W 600 x H 1950 x D 800 mm - Weight approx. 350 kg

- technically efficient, ready to work - after full service - 4-spindle - bumpers (right + left)

Key data: 30 mm

Specifications: Continuous drilling capacity in ST 60 30 mm 12 speed levels 60 – 2240 rpm Spindle motor 1.1 / 1.6 kW Radius approx. 320 mm

NEW drill motor with MK3 mount. Performance data according to type plate. The machine comes from a spare parts warehouse.

NEW - TB08148-1 - Electronics 230V from spare parts warehouse.

NEW electronics 230V - TB09050-1 - from spare parts warehouse

NEW - Electronics 230V - from spare parts warehouse.

NEW - Electronics 230V from spare parts warehouse.

Inv. Num. : 7365 Type: B3N-6000 Producer: TBT Tiefbohrtechnik Created: 1991 Parameters: Control system: Siemens Maximum turning diameter: 8.5-63.5 mm Spindle power: 270 kW Bed length: 17000 mm Maximum drilling length: 8000 mm

Dowel drilling machine DORNBURG Type: DDBP incl. 5-fold gear drill chuck Rotatable drilling unit Support table height adjustable and swivel from -20° to +30°. Motor power 1.5 KW Pneumatic workpiece holder automatic pneumatic drill feed incl. several drill bits. Condition see pictures, or please refer to the item description. Parts can also be picked up by yourself. All measurements are approximate. All information to the best of our knowledge but without warranty. Subject to prior sale. The items can be picked up by yourself or shipped at the expense of the buyer. Shipping costs are a guideline, depending on the distance and unloading option, they may vary.

SPECIFICATIONS: Number of drill bits: 29 - Quick release Drilling distance mm: 32 Pneumatic operation Vertical/horizontal tilt: 0°-90° Installed capacity: KW 2.2 04 Workpiece clamping hounds With angle drill

Key data: 50 mm, 2000 1/min

Solid bench boring mill of the brand Stanko-Import, model 2H125 Stanko import Type: 2H125 Year of construction approx. 1975 massive rod drill with MK4 mount in good condition. Dimensions: L860 x W850 x H2400 Weight approx.: 1050 kg Motor 2,2Kw 380V Drilling depth gauge Automatic threading (RE-LI)up to M24 Drehz. 45 -2000 in 12 stages Feed 0.1-1.6 / Umdr.in 9 levels Projection 200mm Adjustment ranges: quill stroke 280mm Drill head 170mm Table 270mm, 400x400 The machine can be viewed at any time. On-site loading can be easily carried out with a forklift. Transport possible throughout Germany via freight forwarder.

Key data: 40 mm, 315 mm, 200 mm

Solid column drilling machine of the brand WMW, model BS 25 B Mk4 Ready to use. Technically flawless Machine Type: Column Drilling Machine Make: WMW Saalfeld Type: BS 25 B Year of construction: 1962 Control Type: Conventional Freight base: ex-site, freely loaded Location: 17034 Neubrandenburg Shipping time: immediately Price: 2.250,00 net Technical details Drilling performance in steel (diameter): 6 - 40 mm Projection: 315 mm Drilling stroke: 200 mm Headstock adjustment: 280 mm Spindle speeds - infinitely variable: 63...1000 rpm Spindle mount MK: MK 4 Feed: 0.08...1.2 rpm Clamping surface table L x W: 700 x 600 mm Clamping surface of the base plate: 440 x 490 mm Distance Spindle / Base Plate: 1100 mm Total Power Requirement: 2.61 kW Machine weight approx.: 1000 kg Dimensions machine approx. LxWxH: L:1010 x 700 x 235 ...

Solid column drilling machine of the brand Webo, model E 18 massive rod drill with MK mount in good condition. Otherwise technically flawless. Speed 265-2100 rpm-1 The machine can be viewed at any time. On-site loading can be easily carried out with a forklift. Transport possible throughout Germany via freight forwarder. Maschinenhandel Nord new & used machines for industry, trade and commerce Import/Export Service & Advice Also take a look at our Other Ads. Many more drills available Or visit our more than 1000m² exhibition hall with new and used industrial and manufacturing machines, not far from the A20 motorway!

Key data: 16 mm, 275 mm, 160 mm

Solid Inratirea Column Drilling Machine, Type G-16 Ready to use. technically flawless, except for the cover of the motor fan (Replacement can be provided with purchase) Details: Machine Type: Column Drilling Machine Make: Infratirea Type: G16 Year of construction: 1975 Control Type: Conventional Country of origin: Romania Freight base: from the Neubrandenburg location, freely loaded Location: 17034 Neubrandenburg Price: € 1650,00 net Technical details Drilling capacity in steel (diameter): 16 mm Projection: 275 mm Drilling stroke: 160 mm Spindle speeds - infinitely variable: 150 - 2360 / 9 step rpm Spindle holder MK: 3 Distance spindle/table max.: max: 580 / min: 100 mm Feed rate: 0.10 - 0.16 - 0.25 - 0.40 mm/rev Table clamping surface: 300 x 400 mm Table adjustable: vertical 360 mm Table swivel approx.: rotatable 360° Clamping surface of the base p ...

Multi-spindle drilling machine make : Burkhard und Weber / Arboga With interchangeable table Dimensions : LxW 800 x 800 Equipped with 10 spindles, drilling diameter 13.5 mm Cam derailleur, automatic and set-up mode. 2 Coolant pumps . Propulsion : electro-hydraulic. Very powerful, it can be powered with 14 active spindles at the same time. become. Total weight: approx. 8.0 tons. (Forklift loading by GEDE possible)

CNC controlled three-axis under-table cross-cut saw with additional drilling unit for wood and wood-like materials, but also suitable for sawing aluminium non-ferrous metals and plastics. Closed compact production island, low noise pollution and no chips in the machine environment. Our automatic sawing and drilling machine KA 550 CNC - SAW and DRILL is versatile einsetzbar_ – Only saws in automatic mode and for single cuts - Drilling only - Combines drilling and sawing in a single operation The possibilities to work with the drilling unit include drilling and countersinking, combined drilling + countersinking with a combination tool, drill milling of longitudinal holes – longitudinal holes transversely – rectangular cut-outs. The drill feed speed and the drilling pressure can be sensitively adjusted. Technical data Circular Saw and Drilling Machine KA 550 CNC - SAW an ...

Drilling capacity steel/GG: 23 mm Spindle holder: 3 MK Projection: 275 mm Table size: 300 x 400 mm Quill stroke: 90 mm Spindle speeds: 100 - 1180 rpm Feeds: 0.1/0.6/0.25 mm Drive motor: 380 V, 1.25/2.15 kW Dimensions: 850 x 400 x 1770 mm Weight: 280 kg

SPECIFICATIONS: Number of drill bits: 35 Drilling distance mm: 32 Vertical/horizontal swivel Installed capacity KW: 2,8 Quick release Pneumatic operation

From insolvency: Erlo Iberdrill AZ 34 Year of construction 2020 Infinitely variable speeds per potentiometer 80-2010rpm automatic feed 0.1--0.2--0.3 Digital speed display Coolant pump Tapping function with foot switch Work light Pinol stroke 150mm Projection 300mm Recording MK 4 Drill chuck Röhm Supra 3-16mm Table clamping surface 330x320mm Height of machine 1930mm Weight approx. 350kg 3KW Power 380 volts

Semi-automatic drilling device for plastic parts This purely pneumatic drilling device is designed for repeatable drilling of small plastic parts up to approx. 40 x 200 x 40 mm with holes up to 3 mm. Specifications: - Linear axis travel 420 mm - Stroke approx. 30 mm - Height adjustment approx. 100 mm - With 2-hand release - Plexiglass protection on 3 sides - Emergency stop switch - Sturdy, mobile frame made of aluminium profiles - With 4 swivel castors, 2 of them with brakes - Overall dimensions approx. 1000 x 1000 x 1700 mm - Weight approx. 50 kg - With collet for drill bit 1.5 mm Expiration: - Setup: Adjust stop angle to part size - Setup: Alignment of cross table in X and Y - Setup: Set height adjustment to part height - Inserting the part - Triggering via 2-hand button and holding until drilling is completed - Removal of the finished part and placement  ...

Stegher FD Dowel Drill Brand: Stegher Type: FD Year of construction: 1995 M-No.: 35/12951 Control: Alfa-numeric, with pre-programmed drill cartridges Longitudinal and strin-side bores Length stops: Left and right digital stops for longitudinal drilling Lugs for left and right side holes with turret positioning Dowel dimensions: 6-16 mm Drilling depth: 80 mm Motor: 2.2 KW Compressed air: 6 bar Suction: ø80 mm

1Head Paper Drill

2-hole paper drilling machine Hole spacing 80mm Paper Insertion Height 45mm Heavy Cast Iron Table Table size W61 x D80 x H68 cm 220V=1.9A / 380V=1.1A

Professional production system Floor model - works electrically with foot release heavy duty version cleaned & checked Four-head model Floor model with foot pedal heavy duty model adjustable side stops several paper drills drill holder

Cleaned & Checked Model 54S Number of heads: 1 Maximum stack height (mm) 50 Tabletop model Power supply (V) single or three-phase Power 220V=1.05A / 380V=0.6A W x D x H (cm) 80 x 54 x 73 Weight, net (kg) 30

SPECIFICATIONS: Number of drill bits: 35 (1/2 right - 1/2 left) Drilling distance mm: 32 Table width mm: 1250 03 Clamping jacks Installed capacity KW: 3.0 Electrical/pneumatic operation

CAMAM MO-4A double-sided oscillating drill Number of spindles per page 3 Tool mounting bracket basket 16mm Oscillation adjustable from 0-75mm Distance between spindles 50-900M Two spindle speeds 4500/9000r.p.m Two pneumatic material clamps per side

Key data: 63 1/min, 25 mm, 200 mm

Manufacturer: WMW Type: BKR 25 x 4 AI Stock number: 1023 Number of Spindles: 4 Spindle spacing: 475 mm Table working surface: 450 mm x 1900 mm Drilling capacity in steel: 25 mm Morse taper of spindle: MK 4 Connected load: 10.2 kW Weight: 3000 kg

MECOF CS 88 G CUTTER - INSTALLATION YEAR 1990 - SELCA 4045 D steering unit - remote handwheel - x-axis stroke 6300 - Y-axis stroke 950 - Z-axis stroke 1800 - table 8000 x 1000 -n 2° screwed cubes 1500x1000 - spindle motor power 18 Kw - spindle speed 10-1600 with 2 ranges - spindle attachment ISO 50 DIN 2080 - indexed front platform rotation 1 degree - supplied with manual bi-rotary head ISO 50 DIN 2080 connection - fence with gates equipped with microswitch only on 2 sides

Dowel drilling machine for window construction or similar

Zangheri & Boschetti B23 K dowel drill with swivel head Masch. Ref. K 74590 21 spindles Weight 506 kg The machine is in good condition, ready for operation. Subject to changes, errors and prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12

From bankruptcy: Gillardon GB 40 VE Year of construction 2012 No.4519-130-3913 Electromagnetic feed 0.1/0.16/0.25 on the cross lever at the touch of a button Speeds infinitely variable from 60-600rpm 2 step motor Work light Emergency stop button 200mm Pinol Stroke 350mm projection Table size 630x535mm--Clamping surface 400x500mm MK 4 Mount--with Röhm Quick Release Feeder 3-16mm Height of machine 2060mm--Weight about 480kg The machine runs very smoothly and precisely Table and columns with clear signs of wear Digital display of the speed without function + Vice Cekaba-Bon 230mm

Key data: 16 mm

Column Drill Speed 200- 3000 rpm 380 V 16 A Height adjustable 55 cm Expellers Drill chuck Albrecht 3 - 16 mm

Offer 22090 Specifications: - Drilling capacity in steel ST 60 20 mm - Drilling spindle holder MK 2 - Drilling spindle stroke 120 mm - 4 drilling spindle speeds 400 - 2000 rpm - Projection 250 mm - Max. distance table - drilling spindle 720 mm - Table with 2 T-slots 440 x 360 mm - Height adjustable via rack with hand crank - Drive 380 V / 0.6 kW - Space requirement approx. W 550 x H 1900 x D 850 mm - Weight approx. 260 kg - with: - Drill chuck 3 - 12 mm

Specifications: - Drilling capacity in steel ST 60 40 mm - Drilling capacity in steel ST 60 50 mm - Drilling spindle holder MK 4 - Drilling spindle stroke 180 mm - Drilling spindle speeds infinitely adjustable with countershaft - Level 1: 60 - 210 rpm - Level 2 210 - 765 rpm - Projection 330 mm - 3 feeds 0.1 - 0.2 - 0.3 rpm - Table with 2 T-slots 720 x 360 mm - Table height-adjustable via rack with hand crank - Max. distance table – drilling spindle approx. 780 mm - Max. distance between machined base plate and drilling spindle approx. 1250 mm - Coolant device -Lighting - Drive 400 V / 4 kW - Space requirement approx. W 720 x H 2050 x D 1150 mm - Weight approx. 500 kg

Key data: 13 mm

Bench drill Speeds 400 - 4800 rpm Height adjustable 15 cm Röhm Supra 1/32 - 1/2 Weight 35 kg 380 V 16 A

Offer 24280 Specifications: - Drilling capacity in steel ST 60 32 mm - Drilling capacity in steel ST 60 40 mm - Drilling spindle holder MK 3 - Drilling spindle stroke 175 mm - Drilling spindle speeds infinitely adjustable 60 – 1600 rpm - 3 feeds 0.1; 0,16; 0.25 mm/rev - Projection 290 mm - Max distance drilling spindle – table / base plate 790 / 1210 mm - Table with 2 T-slots 570 x 475 mm - Height adjustable via rack with hand crank - Drive 400 V / 1.1 / 1.8 kW - Space requirement approx. W 600 x H 1950 x D 980 mm - Weight approx. 450 kg - with: - Emergency stop button -Lighting - Machine vise - 15 pieces HSS – drill bits 8 to 20 mm

for sale NEW - ALDURO Drilling-Milling Machine BFM 20V2 Drilling capacity up to 20 mm Spindle Holder MK 2 Head swivels +/- 90° Stepless speed adjustment 50 - 2250 rpm Cross table 500 x 180 mm Digital X-travel 195 mm Y-travel 140 mm Motor 1.1 kW, 230 V Machine without base (base), Can be purchased separately Weight approx. 113 kg further models and inquiries to FSA Maschinen AG

Key data: 60 mm, 1600 mm

virgin Solid design, guide tracks on the boom hardened and ground, Stepless speed control, digital speed display Specifications: Drilling capacity max. 60 mm Threading up to M 46 Projection 350 - 1600 mm Vertical movement of the boom 585 mm Drilling head travel (horizontal) 1250 mm Quill stroke 325 mm Tool holder MK 5 Speed range (2) 38 - 275 / 275 - 2000 rpm Feed range (8) 0.06 - 1.00 mm/rev Distance spindle/cube table 165 - 750 mm Distance spindle/base plate 665 - 1250 mm Clamping surface base plate 1740 x 980 mm Cube table 750 x 500 x 500 mm incl. accessories: - Dice table - Drill chuck mandrel MK5 / B16 - Reducing sleeves MK5/4 MK4/3 MK3/2 - LED machine light - Coolant device - Digital speed display - Height-adjustable protective cover - Operating tool - Operating instructions, CE declaration of conformity