bopp used for sale

Key data: 8700 KW, 11003 kVA, 6000 V

Natural Gas Generating Set 8.7 MW/50Hz Wärtsilä W20V34SG with auxiliary equipment This 8.7 MW natural gas-fired power plant, manufactured by Wärtsilä in 2007, is in excellent condition. It has only 17,450 total operating hours and has been consistently serviced by Wärtsilä, including the most recent scheduled 16,000-hour service. The plant ceased operation in 2019 and has since been kept in a warm standby state to prevent corrosion. A professional condition inspection was conducted in November 2024, confirming that both the engine and alternator are in perfect condition. The unit is now available for serious buyers. The plant complies with stringent European emission regulations. It is engineered to operate in high ambient temperatures; the high-temperature (HT) cooling circuit uses air radiator cooling, while the low-temperature (LT) circuit is cooled via a cooling tower.  ...

Key data: 3915 KW, 6000 V

Wartsila 3.9 MW/50Hz Gas Generating Set 12V34SG with CHP Auxiliaries This power plant was built by Wärtsilä at the end of 2010 and commissioned in 2011 as a turnkey project, equipped with a heat recovery system for 10 bar steam production. The plant operates on standard natural gas supplied via a local pipeline. It was in operation until 2021, accumulating a total of 43,767 running hours before being shut down. The complete installation includes a step-up transformer, lube oil system, control panels, synchronizer panel, UPS systems, operator monitors, MCC, start-up system, air compressors, HRCS for 10 bar steam, exhaust system, 6 kV vacuum breaker with synchronization, as well as all manuals and technical drawings. The plant remains installed, with electrical power still connected to all devices. All scheduled maintenance was performed by Wärtsilä Service, with the last maj ...

Key data: 8000 KW

Diesel Generators Wartsila 2 x 12V32 HFO – 2 x 4.0 MW/ 50Hz Deliver proven, industrial-grade power with these Wartsila 12V32 medium-speed diesel generator sets, currently available in standby condition. Equipment is maintained by the book and thus in good operational condition. Last thorough 48k Service was carried out in 2016 by Wartsila Service for both engines and since then, the plant has been operated about 20’000 hours. Designed for continuous and prime power duty, these units offer a good reliability, fuel flexibility, and choiceed auxiliaries — making them ideal for industrial plants, captive power projects, utilities, as a base load or back-up electric power generation. These units are priced for sale. Contact us today to receive commercial valuation, scope clarification, and inspection arrangements for this 8 MW Wartsila power solution Technical Characteristics  ...

1. EQUIPMENT OVERVIEW SIEMENS SGT-500 GAS TURBINES Quantity: Two (2) Units Available Condition: New Surplus / Zero Hours Manufacturing & Storage • Manufactured in 2007 • New surplus, never used • Zero operating hours • Stored strictly in accordance with OEM preservation procedures • Originally supplied for an FPSO project that was cancelled Certification • Marine Rated • DNV (Det Norske Veritas) certified 2. GAS TURBINE – TECHNICAL DATA • Model: Siemens SGT-500 • Configuration: Single-shaft industrial gas turbine • Fuel: Dual fuel – Natural Gas / Diesel • Frequency Capability: 50 / 60 Hz Power Output (ISO conditions – indicative) • Natural Gas: approx. 17.4 MW • Diesel: approx. 17.0 MW (Output may be slightly higher depending on site conditions) Performance • Specific Fuel Consumption • 221 g/kWh (Na ...

We are pleased to present our complete commercial and technical offer for an unused 2 × 750 MW Combined Cycle Gas Turbine (CCGT) Power Plant, based on GE Frame 9FA technology, supplied, installed, but not commissioned. The plant equipment is available as a complete package, including major equipment, auxiliaries, and Balance of Plant (BOP). 1. Plant Configuration Overview Total Configuration: • 2 × GE Frame 9FA Gas Turbines • 2 × CMI Triple Pressure HRSG • 1 × GE Steam Turbine • Combined Cycle Output: ~750 MW per block Status: • Installed / partially installed • Not commissioned • Units have never been fired or operated 2. Gas Turbine Island Gas Turbines • Quantity: 2 Units • Manufacturer: GE • Model: Frame 9FA +e DLN2+ • Fuel: Dual Fuel • Frequency: 50 Hz • Site Rated Output: 241,000 kW per unit • Year of Manufacture / De ...

Granulator especially designed for inline size reduction of thin film (like BOPP / BOPET). Feeding via roller feeder. Extreme througput rate ! brand: NEUE HERBOLD made in germany - heavy duty model - drive 250 kW - size reduction of film - feeding via roller feeder - Rotor diameter: 800 mm - working width: 1950 mm - for very high throuput rates for the size reduction of film, tangled or bunched tapes and bands, PP big bags, crates or other hollow containers, BOPP / BOPET / PP in-line and off-line film extrusion lines.

Coated web width 1315 mm Max. web width 1330 mm primary unwinder: 1000 mm secondary unwinder: 1200 mm rewinder: 1200 mm Speed: 400 m/min Accessories: - Solvent-less mixer Nordmeccanica - Continuous filling World Mixer (with 4 tanks of 200 kg) - 5 rolls Material: COATED WEB BOPP12-80μ,PETP10-30μ,LDPE,LLDPE30-200μ,OPA12-18μ,NYLONCAST30-80μ ALU(Foil)6,3-40μ,PPCAST60-150μ,PAPER40-150gr/m2 LAMINATED WEB BOPP12-80μ,PETP8-30μ,LDPE,LLDPE20-200μ,OPA12-18μ,NYLONCAST20-80μ ALU(Foil)6,3-40μ,PPCAST20-150μ,COEXFILM25-200μ PAPER 40 - 150 gr/ m2

Key data: 19305 KW, 24132 kVA, 11000 V

We are pleased to present the data and technical information for a MAN-based power plant with total capacity of 58 MW, including full operational history. Below is our sale proposal for three (3) MAN 18V48/60 TS diesel generator sets, offered together with Balance of Plant (BOP). 1. Engine Details Manufacturer: MAN Turbo & Diesel Model: 18V48/60 TS Rated Output: 19,305 kW (continuous) per unit Fuel: HSD (diesel); can be converted to HFO with fuel heating system modification Speed: 500 RPM Serial Numbers: 1135657, 1135658, 1135659 2. Alternator Details Manufacturer: ABB Rating: 24,132 kVA Voltage: 11,000 V Frequency: 50 Hz Power Factor: 0.8 3. General Information Quantity: 3 generator sets Manufacturing Year: 2014 First Operation: January 2016 Average Running Hours: approx. 5,000–6,000 hours Status: Very good condition, fully operational Application: B ...

Material width until 820 mm PET 12 to 20my OPP 15 to 75 my BOPP 12 to 75 my OPA 30 to 50 my Paper 45 to 110 g/m2 Composite foils with aluminium 40 to 250 my Composite foils without aluminium 40 to 250 my Main functions of the machine Previously used for priming and varnishing various plastic films and composites, also used after digital printing. Technical specification Unwinding Roll diameter Up to 1 000 mm Core diameter 76 and 152 mm Roll weight Up to 1 000 kg Side edge control FIFE DP-30 Web Guide Controller. Pre-treatment station Corona AHLBRANDT TG 3104-TP Gravure coating unit 2 coating carriages 1 for primer and 1 for varnish. For coating cylinders circumference 350 to 860 mm. Bale width 900 mm Some coating cylinders. With circulating air up to 120°C Dryer length 2 x approx. 2.2 m Thermo oil  ...

MATERIAL: ∙ LDPE 0.020 – 0.160 mm ∙ PE / OPP 0.012 – 0.100 mm ∙ CPP 0.020 – 0.050 mm ∙ BOPP, PET, OPA 0.010 – 0.025 mm ∙ Paper 25 – 120 g/m2 ∙ Laminate 0.02 – 0.12 mm BASIC TECHNICAL PARAMETERS: Max printing width: 1270 mm Max material width: 1320 mm Min material width: 500 mm Min printing repeat: 360 mm Max printing repeat: 800 mm Anilox cylinder inner diam. 136,989 mm perimeter 500 mm sleeve length 1350 mm Max. mechanical speed 300 m/min Working printing speed Tension in printed web: depends on kind and quality of printed material, printing inks, ink transfer, printing repeat length, printing plates, kind of printed motive: cross lines – screen density, anilox rollers volume, dot gain, lacquer, surrounding temperature and type of doctor ...

SUITABLE FOR PRINTING: BOPP, PP ,CAST, ALU, LDPE, NYLON, PETP, OPA, Paper, PE, CPP, BOPET BOPP: 10 - 100 microns CPP: 20 - 100 microns PET: 12 - 80 microns Printing Width: 1200 mm Web Width: 1300 mm Printing repeat: max 800 mm, min 350 mm max roll diameter: Unwinder: 1000 mm. Rewinder: 1000 mm. Drying System: electrical Ink type: solvent, Water base System: sleeved , Geared, Sleeve Width 1300 mm 35 - 5 pcs 38 - 6 pcs 40 - 6 pcs 45 - 6 pcs 48 - 4 - pcs 50 - 6 - pcs 55 - 6 - pcs 60 - 6 - pcs 66 - 4 pcs 69 - 5 pcs Anilox : 300 - 2 pcs , 220 - 2 pcs, 120 - 1 pcs, 100 - 1 pcs.

Qty. 1 Second-hand wall paper production line – already dismantled & in warehouse Mfc.: Shin Shang Built: 1998 New electrical incl. cables in 2019 Production stopped in 2/2023 In line system Printing width: 850 mm 6 colors printing station Hot embossing system PVC coating system Six colors high speed paper roll CI flexo printing machine Automatic high speed flexo printing machine High speed CI type Central Drum 6 Colors Flexographic Printing Machine for paper OPP/ BOPP/ PP plastic film rotogravure printing machine

2018 Xeikon 3030 plus 5 colurs digital label press roll to roll Manufacturer: Xeikon Type: 3030 plus Web width: 330 mm Year of production Machine comes with 2 spare developers for Orange and green Key Specifications: Technology: Dry Toner, Full Rotary Print Resolution: 1200 dpi (with 4-bit variable dot density) Web Width: 330 mm (13 inches) Print Speed: Up to 15 meters/min (49.2 ft/min) Colors: 5 (CMYK + Opaque White or Spot/Gamut Color) Substrates: Wide range, including self-adhesive materials (BOPP, PVC, PET), paperboards, and papers (40-350 GSM) Toner: FDA-approved, food-safe Features: Variable repeat length, inline densitometer, potential for inline finishing, metallic label production via ColorLogic, microtext, variable data.

8 Color Stack UV Flexo Printing Machine Overhauled 2020 with installation IST MBS 7 UV system in 2020. Substrates: OPP,BOPP,PET,PVC,OPS,paper,aluminium foil. Print width max 560 mm, Material width max 580 mm 8 flexo printing units Speed 200 m/min, Camera (E+L) Register control (E + L

KRONES Contiroll Roll-Fed Labelling Machine – 36,000 BPH (Year 2005) High-performance roll-fed labelling machine designed for applying wrap-around film labels to PET bottles in high-speed beverage production lines. The KRONES Contiroll system offers reliable continuous operation and precise label application for large-scale bottling facilities. General Information - Manufacturer: KRONES AG - Model: Contiroll - Year of Manufacture: 2005 - Machine Type: Roll-fed labelling machine - Condition: Excellent – professionally maintained and fully operational Technical Specifications - Production Capacity: up to 36,000 bottles per hour - Reference Bottle Size: 1.5 L PET bottle - Bottle Type: PET, cylindrical Labeling System - Label Type: Roll-fed wrap-around labels - Label Material: Typically OPP or BOPP film - Glue System: Hot-melt glue application for precise and secur ...

Finova Portioning & Packaging Line A fully integrated, factory-crated Finova portioning and packaging line designed for precision cheese processing. Built in 2022, this unused system combines cutting-edge technology for cutting, X-ray inspection, weighing, MAP flow pack wrapping, and gas control in a compact, ready-to-deploy format. System Overview Subsystem Manufacturer Description Primary Cutter Finova Cuts 200x600x900 mm or 100x300x500 mm cheese blocks into logs/portions Disassembly & Alignment Finova Converts bars to individual format, aligns for X-ray X-ray & Calibration Finova Inline scanning, volumetric calibration, weight-targeted cut logic Weight Check & Reject Finova Weight verification with automated reject for non-conforming products Portion Cutter Finova Servo-controlled, programmable vertica ...

Offered is a horizontal flow wrap packaging machine (HFFS). Material types: heat-sealable films (BOPP, PET/PE, Alu/PE), cold-seal films, film width max.: 500mm, roll diameter max.: 350mm, core holder: 75mm, product dimensions X/Y/Z: 40mm-350mm/10mm-220mm/0mm-100mm, production output: 120-150bags/min. Viewing possible by appointment.

FOLIANT Taurus 760 SF Industrial Laminating Machine year 2017 Max sheet size : 760 x 1150 mm Min sheet size : 320 x 250 mm Max speed : 30 m/min Paper weight : 115 - 600 gsm Temp control : 80 - 140 C Lamination films : BOPP 23 - 42 microns , max nylon film max 35 microns, PET film max 25 microns - Pallet Feeder - Touch screen controls - PLC controlled overlaps - Almost 8 minute warm up time - Film air shaft - Integrated Bump separator - Pallet stacker

Automatic packing machine for packing pyramid tea bags and also rectangular and double chamber tea bags into 3-side sealed sachets. With a stack and count output of bags. 5 bags can be output in a group | PLC controlled, operation via touch screen. - Specifications: max. speed of the machine in neutral: 50 cycles per minute | dosing volume: 5~40 cm? | tea bag capacity: 1.5-10g | sachet dimensions LxW: 95x90mm (standard), optional: 85x80 / 105x100mm | suitable film for the sachets: heat sealable composite film (BOPP20/VM-PET12 / PE40, Paper / P.E, OPP20 / Pearl35) |power supply: 220V, 50/60Hz | power consumption: 2.1kW | compressed air required: 0.6 MPa | compressed air consumption: 200l/min | machine dimensions LxWxH: 2700x1450x1300 mm | weight: 420kg.

Vertical form and filling system for liquids into Doypack-Style bags (stand-up pouch). Including liquid dosing device (for high viscosity liquids). Pneumatic transmission system, computer controlled, easy operation and adjustments. Suitabel for a wide range of films: PE/PA/PET, PE/PA, PE/PET, PE/BOPP, PE/AL/PET, etc. - Specifications: packaging volume: 100-550ml | bag size: L(120-180)xW100-150)mm | max. speed of the machine in neutral: 25 cycles/minute | accuracy: +/- 1.5% | 220V, 1.7kW | 0.4m?, 6bar | machine dimensions: L1450xW930xH2370mm | weight: 330kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In ad ...

Vertical form and filling system for liquids into Doypack-Style bags (stand-up pouch) with integrated system to add caps. Including liquid dosing device (for high viscosity liquids). - Pneumatic transmission system, computer controlled, easy operation and adjustments. Suitabel for a wide range of films: PE/PA/PET, PE/PA, PE/PET, PE/BOPP, PE/AL/PET, etc. - Specifications: packaging volume: 100-550ml | bag size: L(120-180)xW100-150)mm | max. speed of the machine in neutral: 25 cycles/minute | accuracy: +/- 1.5% | 220V, 1.0kW | 0.4m?, 6bar | machine dimensions: L3700xW1000xH2550mm | weight: 400kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are a ...

Vertical filling machine for low-viscosity liquids into pillow-bags. Including liquid dosing device. Suitable for laminated compund films like BOPP/PE and others. - Specifications: max. speed of the machine in neutral: 70 cycles/minute | suitable for volumes from 50-500ml | stepless bag length regulation | accuracy: depending on water level product | max. film width: 30-100mm | bag size: max. L80-150xW30-100mm | without air pressure | 220V, 1.75kW | stainless steel version (SS201 in housing, contact material part SS304) | machine dimensions: L1120xW900xH1950mm | weight: 480kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediate ...

Vertical filling machine for low-viscosity liquids into pillow-bags. Including liquid dosing device. Suitable for laminated compund films like BOPP/PE and others. - Specifications: max. speed of the machine in neutral: 60 cycles/minute | suitable for volumes from 100-1000ml | stepless bag length regulation | accuracy: depending on water level product | max. film width: 50-200mm | bag size: max. L50-250xW50-200mm | without air pressure | 220V, 1.95kW | stainless steel version (SS201 in housing, contact material part SS304) | machine dimensions: L1120xW920xH2050mm | weight: 500kg Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations fr ...

Vertical filling machine for low-viscosity liquids into pillow-bags. Including liquid dosing device. Suitable for laminated compund films like BOPP/PE and others. - Specifications: max. speed of the machine in neutral: 70 cycles/minute | suitable for volumes from 20-100ml | stepless bag length regulation | accuracy: depending on water level product | max. film width: 30-150mm | bag size: max. L50-220xW30-150mm | without air pressure | 220V, 1.7W | stainless steel version (SS201 in housing, contact material part SS304) | machine dimensions: L790xW600xH1780mm | weight: 400kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately  ...

Vertical filling machine for low-viscosity liquids into pillow-bags. Including liquid dosing device. Suitable for laminated compund films like BOPP/PE and others. - Specifications: max. speed of the machine in neutral: 200 cycles/minute | suitable for volumes from 10-50ml | stepless bag length regulation | accuracy: depending on water level product | max. film width: 30-80mm | bag size: max. L50-110xW30-80mm | without air pressure | 220V, 1.7kW | stainless steel version (SS201 in housing, contact material part SS304) | machine dimensions: L790xW600xH1780mm | weight: 400kg That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately fr ...

Vertical filling machine for low-viscosity liquids into pillow-bags. Including liquid dosing device. Suitable for laminated compund films like BOPP/PE and others. - Specifications: max. speed of the machine in neutral: 200 cycles/minute | suitable for volumes from 5-20ml | stepless bag length regulation | accuracy: depending on water level product | max. film width: 30-80mm | bag size: max. L50-110xW30-80mm | without air pressure | 220V, 1.7kW | stainless steel version (SS201 in housing, contact material part SS304) | machine dimensions: L790xW600xH1780mm | weight: 350kg That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately fro ...

Vertical packaging machine specially designed for the cosmetics industry for the production of round bags and for 4-side sealed double chamber bags. The completely round side sealed bags are produced at 2 pieces per cycle. When changing the bag type, time is needed for changeover, which requires technical experience. A dosing pump for creams, fluids, etc., is included and is selected on the basis of customized product requirements, which results in the respective specifications. PLC LCD touch display from Siemens, automatic program-Set-Up, mark sensor, stainless steel (SS304) version including hot printer (production date, etc.). - Specifications: bag sizes: customized | film roll width: max. 320mm | suitable for composite and single-layer aluminium, PE, BOPP and PP films, paper | max. speed of the machine in neutral: 40 cycles/minute (corresponds to 80 round bags or 40 double chamber ba ...

Vertical packaging machine including dosing system(s) with 12 manufacturing lanes to produce stick-packs with back center sealing (alternativ: 3-/4-side sealing - surcharge applies) to pack powder (pepper, milkpowder, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), auger filler with servo motor, with hopper. - Specifications: accuracy: +/-0,3-1%, max. speed of the machine in neutral: 12x60 cycles/minute | accuracy: +/-10% | suitable for all BOPP/PE and laminated films | bag sizes: L(50-350)xW(10-30)mm | power: 220V, 7.5kW | compressed air: 1.5m?/min, 6bar | machine dimensions: L1900xW1500xH1900mm | weight: 880kg. That machine/system is available in different versions for different packaging sizes and with different packaging  ...

Vertical packaging machine including dosing system(s) with 10 manufacturing lanes to produce stick-packs with back center sealing (alternativ: 3-/4-side sealing - surcharge applies) to pack powder (pepper, milkpowder, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), auger filler with servo motor, with hopper. - Specifications: accuracy: +/-0,3-1% | max. speed of the machine in neutral: 10x60 cycles/minute | accuracy: +/-10% | suitable for all BOPP/PE and laminated films | bag sizes: L(50-350)xW(10-38)mm | power: 220V, 6.5kW | compressed air: 1.5m?/min, 6bar | machine dimensions: L1800xW1500xH1900mm | weight: 750kg. That machine/system is available in different versions for different packaging sizes and with different packaging ...

Vertical packaging machine including dosing system(s) with 8 manufacturing lanes to produce stick-packs with back center sealing (alternativ: 3-/4-side sealing - surcharge applies) to pack powder (pepper, milkpowder, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), auger filler with servo motor, with hopper. - Specifications: accuracy: +/-0,3-1% | max. speed of the machine in neutral: 8x60 cycles/minute | accuracy: +/-10% | suitable for all BOPP/PE and laminated films | bag sizes: L(50-350)xW(10-50)mm | power: 220V, 5.5kW | compressed air: 1.5m?/min, 6bar | machine dimensions: L1700xW1400XH1900mm | weight: 650kg. That machine/system is available in different versions for different packaging sizes and with different packaging s ...

Vertical packaging machine including dosing system(s) with 6 manufacturing lanes to produce stick-packs with back center sealing (alternativ: 3-/4-side sealing - surcharge applies) to pack powder (pepper, milkpowder, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), auger filler with servo motor, with hopper. - Specifications: accuracy: +/-0,3-1% | max. speed of the machine in neutral: 6x60 cycles/minute | accuracy: +/-10% | suitable for all BOPP/PE and laminated films | bag sizes: L(50-350)xW(10-68)mm | power: 220V, 4.5kW | compressed air: 1.5m?/min, 6bar | machine dimensions: L1600xW1400xH1900mm | weight: 550kg. That machine/system is available in different versions for different packaging sizes and with different packaging s ...

Vertical packaging machine including dosing system(s) with 4 manufacturing lanes to produce stick-packs with back center sealing (alternativ: with 3-/4-side seal - surcharge applies) to pack powder (pepper, milkpowder, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), auger filler with servo motor, with hopper. - Specifications: accuracy: +/-0,3-1% | max. speed of the machine in neutral: 4x60 cycles/minute | accuracy: +/-10% | suitable for all BOPP/PE and laminated films | bag sizes: L(50-350)xW(10-100)mm | power: 220V, 3.5kW | compressed air: 1.5m?/min, 6bar | machine dimensions: L1500xW1300xH1900mm | weight: 450kg. That machine/system is available in different versions for different packaging sizes and with different packagin ...

Vertical packaging machine including dosing system(s) with 12 manufacturing lanes to produce stick-packs with back center sealing (alternativ: 3-/4-side sealing - surcharge applies) to pack normal liquids (water, vinegar, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), piston Pump with 60 liter hopper. - Specifications: max. speed of the machine in neutral: 12x60 cycles/minute | accuracy: +/-10% | suitable for all BOPP/PE and laminated films | bag sizes: L(50-350)xW(10-30)mm | power: 220V, 7.5kW | compressed air: 1.5m?/min, 6bar | machine dimensions: L1900xW1500xH1900mm | weight: 880kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that ou ...

Vertical packaging machine including dosing system(s) with 8 manufacturing lanes to produce stick-packs with back center sealing (alternativ: 3-/4-side sealing - surcharge applies) to pack normal liquids (water, vinegar, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), piston Pump with 60 liter hopper. - Specifications: max. speed of the machine in neutral: 8x60 cycles/minute | accuracy: +/-10% | suitable for all BOPP/PE and laminated films | bag sizes: L(50-350)xW(10-50)mm | power: 220V, 5.5kW | compressed air: 1.5m?/min, 6bar | machine dimensions: L1700xW1400XH1900mm | weight: 650kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our  ...

Vertical packaging machine including dosing system(s) with 10 manufacturing lanes to produce stick-packs with back center sealing (alternativ: 3-/4-side sealing - surcharge applies) to pack normal liquids (water, vinegar, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), piston Pump with 60 liter hopper. - Specifications: max. speed of the machine in neutral: 10x60 cycles/minute | accuracy: +/-10% | suitable for all BOPP/PE and laminated films | bag sizes: L(50-350)xW(10-38)mm | power: 220V, 6.5kW | compressed air: 1.5m?/min, 6bar | machine dimensions: L1800xW1500xH1900mm | weight: 750kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that ou ...

Vertical packaging machine including dosing system(s) with 6 manufacturing lanes to produce stick-packs with back center sealing (alternativ: 3-/4-side sealing - surcharge applies) to pack normal liquids (water, vinegar, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), piston Pump with 60 liter hopper. - Specifications: max. speed of the machine in neutral: 6x60 cycles/minute | accuracy: +/-10% | suitable for all BOPP/PE and laminated films | bag sizes: L(50-350)xW(10-68)mm | power: 220V, 4.5kW | compressed air: 1.5m?/min, 6bar | machine dimensions: L1600xW1400xH1900mm | weight: 550kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our  ...

Vertical packaging machine including dosing system(s) with 6 manufacturing lanes to produce stick-packs with back center sealing (alternativ: 3-/4-side sealing - surcharge applies) to pack granules (sugar, salt, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), swing cup volume filling device for granules. - Specifications: max. speed of the machine in neutral: 6x60 cycles/minute | accuracy: +/-10% | suitable for all BOPP/PE and laminated films | bag sizes: L(50-350)xW(10-68)mm | power: 220V, 4.5kW | compressed air: 1.5m?/min, 6bar | machine dimensions: L1600xW1400xH1900mm | weight: 550kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that o ...

Vertical packaging machine including dosing system(s) with 8 manufacturing lanes to produce stick-packs with back center sealing (alternativ: 3-/4-side sealing - surcharge applies) to pack granules (sugar, salt, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), swing cup volume filling device for granules. - Specifications: max. speed of the machine in neutral: 8x60 cycles/minute | accuracy: +/-10% | suitable for all BOPP/PE and laminated films | bag sizes: L(50-350)xW(10-50)mm | power: 220V, 5.5kW | compressed air: 1.5m?/min, 6bar | machine dimensions: L1700xW1400XH1900mm | weight: 650kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that o ...

Vertical packaging machine including dosing system(s) with 10 manufacturing lanes to produce stick-packs with back center sealing (alternativ: 3-/4-side sealing - surcharge applies) to pack granules (sugar, salt, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), swing cup volume filling device for granules. - Specifications: max. speed of the machine in neutral: 10x60 cycles/minute | accuracy: +/-10% | suitable for all BOPP/PE and laminated films | bag sizes: L(50-350)xW(10-38)mm | power: 220V, 6.5kW | compressed air: 1.5m?/min, 6bar | machine dimensions: L1800xW1500xH1900mm | weight: 750kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that ...

Vertical packaging machine including dosing system(s) with 12 manufacturing lanes to produce stick-packs with back center sealing (alternativ: 3-/4-side sealing - surcharge applies) to pack granules (sugar, salt, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), swing cup volume filling device for granules. - Specifications: max. speed of the machine in neutral: 12x60 cycles/minute | accuracy: +/-10% | suitable for all BOPP/PE and laminated films | bag sizes: L(50-350)xW(10-30)mm | power: 220V, 7.5kW | compressed air: 1.5m?/min, 6bar | machine dimensions: L1900xW1500xH1900mm | weight: 880kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that ...

Vertical packaging machine including dosing system(s) with 4 manufacturing lanes to produce stick-packs with back center sealing (alternativ: with 3-/4-side seal - surcharge applies) to pack normal liquids (water, vinegar, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), piston Pump with 60 liter hopper. - Specifications: max. speed of the machine in neutral: 4x60 cycles/minute | accuracy: +/-10% | suitable for all BOPP/PE and laminated films | bag sizes: L(50-350)xW(10-100)mm | power: 220V, 3.5kW | compressed air: 1.5m?/min, 6bar | machine dimensions: L1500xW1300xH1900mm | weight: 450kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that o ...

Vertical packaging machine including dosing system(s) with 4 manufacturing lanes to produce stick-packs with back center sealing (alternativ: with 3-/4-side seal - surcharge applies) to pack granules (sugar, salt, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), swing cup volume filling device for granules. - Specifications: max. speed of the machine in neutral: 4x60 cycles/minute | accuracy: +/-10% | suitable for all BOPP/PE and laminated films | bag sizes: L(50-350)xW(10-100)mm | power: 220V, 3.5kW | compressed air: 1.5m?/min, 6bar | machine dimensions: L1500xW1300xH1900mm | weight: 450kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note tha ...

Compact vertical packaging system for small 3-side sealed pouches. The system is designed for 3 different dosing units and thus allows the packaging of granulates, powders and liquids. When changing the product type, time is needed for changeover, which requires technical experience. The configurations of the dosing units are selected on the basis of customized product requirements, which results in the respective specifications. OMRON PLC and 7-touchscreen, OMRON PID temperature controller, SCHNEIDER or OMRON electronic parts, AIRTAC pneumatic components | self-diagnose functions, motorized tension control, fast and smooth film transportation. - Specifications: max. speed of the machine in neutral: 50 cycles/minute | bag size: L(30-180)xW(10-80)mm | bag type: 3-side-seal-bags | vertical seal width: 8mm, horizontal seal width: 8mm, cutting way: serrate cutting | film width: max. 180mm |  ...

Sample system for filling wet coleslaws, sauerkraut, red cabbage into prefabricated bags including vacuuming of the bags. Rotary type volume dosing station with the special feature that the product is pressed into the bag by a piston cylinder. The filled bags are then transferred to the rotating vacuum and sealing station. 10 individual chamber vacuumers - particularly suitable for products containing high liquid - ensure an excellent vacuuming result. Thermal transfer printer and product infeed unit included. PLC controlled, operation via touch screen. Suitable for a wide range of pouches such as composite and single-layer aluminium, PE, BOPP and PP films, paper, etc. - Specifications: Filling range: 20-1000g | max. number of machine cycles in neutral: 80 cycles/min | bag dimensions: W(80-160)xL(80-240)mm | dimensions of the machine LxWxH: 2100x1400x1700mm. Please note: This is only a s ...

Flow wrapping machine for high speed packaging of smaller products in flow pack bags. The flow wrapping machine is suitable for packaging of one or more, evenly or unregular shaped, dry, medium/larger products. The flowwrapper is equipped with a special infeed system of 6 guiding conveyors (driven by servo motors) to sort the products in series and feed them to the infeed table. The products do not have to be loaded individually by hand, which results in a considerable production advantage and contributes significantly to the efficiency of the flowwrapper. AMTECs flow wrap packaging machine is perfectly configured to the bag length in terms of the knives and their diameters with an optimization of the speed in the result. - Specifications: suitable product dimensions L(depending on bag length)xW(15-60)xH(5-30)mm | bag dimensions: L(48-60)xW(15-60)xH(5-30)mm | number of rotary knives: 6 p ...

Flow wrapping machine for high speed packaging of smaller products in flow pack bags. The flow wrapping machine is suitable for packaging of one or more, evenly or unregular shaped, dry, medium/larger products. The flowwrapper is equipped with a special infeed system of 6 guiding conveyors (driven by servo motors) to sort the products in series and feed them to the infeed table. The products do not have to be loaded individually by hand, which results in a considerable production advantage and contributes significantly to the efficiency of the flowwrapper. AMTECs flow wrap packaging machine is perfectly configured to the bag length in terms of the knives and their diameters with an optimization of the speed in the result. - Specifications: suitable product dimensions L(depending on bag length)xW(15-60)xH(5-30)mm | bag dimensions: L(45-55)xW(15-60)xH(5-30)mm | number of rotary knives: 6 p ...

Flow wrapping machine for high speed packaging of smaller products in flow pack bags. The flow wrapping machine is suitable for packaging of one or more, evenly or unregular shaped, dry, medium/larger products. The flowwrapper is equipped with a special infeed system of 6 guiding conveyors (driven by servo motors) to sort the products in series and feed them to the infeed table. The products do not have to be loaded individually by hand, which results in a considerable production advantage and contributes significantly to the efficiency of the flowwrapper. AMTECs flow wrap packaging machine is perfectly configured to the bag length in terms of the knives and their diameters with an optimization of the speed in the result. - Specifications: suitable product dimensions L(depending on bag length)xW(15-60)xH(5-30)mm | bag dimensions: L(48-60)xW(15-60)xH(5-30)mm | number of rotary knives: 5 p ...

Flow wrapping machine for high speed packaging of smaller products in flow pack bags. The flow wrapping machine is suitable for packaging of one or more, evenly or unregular shaped, dry, medium/larger products. The flowwrapper is equipped with a special infeed system of 6 guiding conveyors (driven by servo motors) to sort the products in series and feed them to the infeed table. The products do not have to be loaded individually by hand, which results in a considerable production advantage and contributes significantly to the efficiency of the flowwrapper. AMTECs flow wrap packaging machine is perfectly configured to the bag length in terms of the knives and their diameters with an optimization of the speed in the result. - Specifications: suitable product dimensions L(depending on bag length)xW(15-60)xH(5-30)mm | bag dimensions: L(55-85)xW(15-60)xH(5-30)mm | number of rotary knives: 4 p ...

Flow wrapping machine for high speed packaging of smaller products in flow pack bags. The flow wrapping machine is suitable for packaging of one or more, evenly or unregular shaped, dry, medium/larger products. The flowwrapper is equipped with a special infeed system of 6 guiding conveyors (driven by servo motors) to sort the products in series and feed them to the infeed table. The products do not have to be loaded individually by hand, which results in a considerable production advantage and contributes significantly to the efficiency of the flowwrapper. AMTECs flow wrap packaging machine is perfectly configured to the bag length in terms of the knives and their diameters with an optimization of the speed in the result. - Specifications: suitable product dimensions L(depending on bag length)xW(15-60)xH(5-30)mm | bag dimensions: L(80-170)xW(15-60)xH(5-30)mm | number of rotary knives: 3  ...

Flow wrapping machine for high speed packaging of smaller products in flow pack bags. The flow wrapping machine is suitable for packaging of one or more, evenly or unregular shaped, dry, medium/larger products. The flowwrapper is equipped with a special infeed system of 6 guiding conveyors (driven by servo motors) to sort the products in series and feed them to the infeed table. The products do not have to be loaded individually by hand, which results in a considerable production advantage and contributes significantly to the efficiency of the flowwrapper. AMTECs flow wrap packaging machine is perfectly configured to the bag length in terms of the knives and their diameters with an optimization of the speed in the result. - Specifications: suitable product dimensions L(depending on bag length)xW(15-60)xH(5-30)mm | bag dimensions: L(90-220)xW(15-60)xH(5-30)mm | number of rotary knives: 2  ...