book trimmer used for sale

Bookletmaker Uchida U-Booklet Maximum paper size A3+ Maximum sheet size 330.2 x 468 mm Minimum sheet size 110 x 210 mm block thickness 16 sheets Capacity 800 issues/hour Number of stitching heads 2 pcs Mounting types saddle, side and corner Shackle type 26/6 Setting type Manual (press button) or automatic

3 trimmers horauf SN140, automatic , in very good condition, year 99

Muller Martini Perfect Binding Line, Equipped With: Gathering Machine: Muller Martini Type 1571, 12 Stations, Plus Hand Station, Trasnfer Element / Reject Gate Muller Martini 3641, Transfer Element To Binder Muller Martini 3643. Perfect Binder: Muller Martini 3016-18 (1998) M-Mo. 94.02359, MONOSTAR with 18 Clamps, Milling and Notching Station, Hot-Melt Spine and Side Gluing with Pre-Heating Tank, Stream Cover Feeder, Pressing Station, Conveyor Belts to Trimmer. Three Knife Trimmers: Muller Martini Merit 3671 (1998), Muller Martini 3631 (1998) Stacker Delivery, Mechanical Speed: 5,000 cycles/hour, Format: min. 100x140mm, Max. 420x305mm, Book thickness: min. 3mm, Max. 60mm, Cover width (open): min. 203mm, max. 642mm.

Fully automatic Saddle stitcher Configuration: Fully automatic from feeder to trimmer • 1 cover folder feeder • 1 horizontal sheet feeder • 6 vertical sheet feeders • Control panel with main operating point • Stitching machine with wire feed gear • Trimmer with trimmer feed • Compensating stacker RIMA RS-14 Technical specifications: Maximum format untrimmed 320 - 350 x 460 mm Maximum trimmed format 340 x 450 mm Maximum cutting thickness (single use) 12 mm cutting thickness (double use) 1/2x punch knife width Maximum staple thickness 6 mm Maximum trimming front trimming 50 mm Maximum trimming head and foot trimming 50 mm Stitching heads max. 4 Hohner narrow stitching heads staple length of the vertical feeders approx. 250 mm (depending on the paper) Arch opening vacuum suction cups at least 6 mm rear fold, 8 mm front fold, Sheet opening gripper max. 20  ...

Label book printing machine Iwasaki, machine number 1499, 3 colors, 2 colors, punching unit, embossing unit, various mounting plates, laminator, UV dryer, dispenser, slitter rewinder, in good condition, immediately available

UK Power Generators Ltd, have pleasure to present gas unit by Caterpillar G3516A for sale. Attached are the pictures for the genset, containerised package Machine Model Caterpillar G3516A Year of Manufacture 2000 Rated Output Power 1030 kw Fuel Gas Condition Used Speed 1500 RPM Frequency 50Hz Voltage 400 volts Location United Kingdom The containerised package is a complete plug and play unit. All life maintained by manufacturer approved service provider and available on request. Fully major overhauled been completed just now. Great For site visit, pricing and booking information, feel free to contact us at: Infoukpowergeneratorsltd ~ UK Power Generators Ltd

Booklet Maker Plockmatic 61 / FKS DC 61 Stitching and folding Two Rapid staple heads

Kallfass Universa 400 with shrink tunnel and grab section Kallfass Universa 400 Year 2006 The system is immediately available. The Universa 400 is included in the price of the complete system. The machine is technically overhauled and is in very good condition. Technical data: - Length of cross welding punch: 450mm - Welding punch passage: max. 200mm - Min. product length: 80mm - automatic length compensation to reduce the punch gap - Welding punch monitoring - Control: Siemens S7-300 - Operating terminal with Siemens touch panel - Welding punch with replaceable welding strip - Side welding knife combination, can also be exchanged for a wheel knife system - Processable films PE and PO - Year of construction 2006 - Kallfass Compact 450 SO shrink tunnel - Gripper section with inline belt - Book magazine on gripper section - Ionization for blocking loose leaves - Cur ...

SCM edge bander model BASIC 1 : - useful thickness of the panel from 8 to 40 mm - feed speed 8 mt/min - overall dimensions approx. 1.7 x 0.7 x h = 1.3 mt Operating groups: - gluing with hot melt glue tank - loader and shearing for roll material - Header kW 0,6 - Trimmers kW 0,5+0,5

Heidelberg Stitchmaster ST 100 Year of construction.: 2004 6 Investors 1x Turnaround feeder Trimmers with central groove Stacker

Standard configuration Machine ? Solid machine frame with integrated laser resonator ? Feed station with self centering clamps ? Automatic tube support for raw material ? Feeder claws with self centering parallel collet chuck ? High-precision motors: Digital 3-phase servo motors with high precision of the drive axes. ? Part removal station PRS 3001 with brush table, finished parts up to 3000 mm long ? Tube support for finished parts with wheel-away guide rollers ? Enclosed beam delivery ? NitroLine ? FocusLine ? SprintLine ? Laser power control ? Programmable cutting gas pressure ? Automatic shutdown device ? Work area lighting TRUMPF laser ? CO2 laser TruFlow 2000 ? Radio-frequency excitation ? Maintenance-free radial turbine blower ? Laser control TASC 3 ? Laser log book function ? Chiller Cutting head ? Laser cutting head with 155 mm (6?) lens ? ControlLine Control ? Sinumerik ...

Span: 7900mm, load capacity: 1.6+1.6t, with inspection book, without accessories, last maintenance 2015, on-site inspection is possible, was maintained regularly.

Equipments: suitable for any kind of booklet maker / saddle stitcher 2x Hohner 48/5 S stitching heads

Format: A5 to A3 Equipment / Additional information: 1x Horizon tower TC-8 a (8 stations) M.No.: 002201 1x Horizon tower TC-8 b (8 stations) M.No .: 002306 1xHorizon stapling / folding unit SPF-10II M.No .: 112028 2x Stitching heads Hohner Universal 48/5 S 1x Horizon Trimmer FC-10II M.No .: 100026 1xKicker PK-10 1xvibrator Ser.No.: 002207

Profile bending machine hydraulic heavy duty -output shafts 360 mm Equipped with traction tooling for H-beam HEB IPE INP rolling on the hard-side Configuration -pyramid dual pinch side rolls independent hydraulic -3 rolls driven hydraulic and gear unit -synchro. -set of rolls for HEB beam – INP beam - flat bar square bar. -Set of heads for traction the HEB – INP beam bending on the hard side -Set of rolls for pipe bending. Pipe 20 inches max capacity. -Lateral correctors left/right side hydraulic operated in 3 directions -Add-on rollers angle bending & T-section leg-in / leg-out -Control panel console electric joysticks manual use & program automatic -Digital readout screen display 8 axis position reading of the rolls - 8 axis automatic programmable bending works -Electric Vac 400/50 ( rewirable on request ) -weight total of the machine approx. 65 Ton ...

Single sided edge bander with squaring device Edges: 0,4 to 12 mm Panel thickness: 10 to 55 mm Min. panel width: 60 mm Feed speed 12,5 m/min Equipment: Squaring device Heating zone Coil- and stripmagazine Glue unit Pressure zone End trimmer Chamfer trimming Mutlifunctional milling aggregate Profile scraping glue scrapers Buffing

Hedge trimmer for excavator attachment for weight class 1–6to unused! Manufacturer Haener Baumaschinen Model HHE120 Condition Unused, never been in use, year of construction 2022 Weight class 1–6t Width 1.200mm Net weight 48 kg Operating pressure 180 bar Liter capacity 18-21 L/min Stock Special price

WESTFALIA MSD 50-01-076 MILK & WHEY SEPARATOR APPLICATION: CREAM SEPARATION CAPACITY: 5.000 LT/H FOR MILK SKIMMING MACHINE COMES WITH TOOLS AND INSTRUCTIONS BOOK

SEITAL SE15 X MILK & WHEY SEPARATOR APPLICATION: CREAM SEPARATOR CAPACITY: 3.200 LT/H FOR MILK SKIMMING 4.500 LT/H FOR WHEY SKIMMING MACHINE COMES WITH TOOLS AND INSTRUCTIONS BOOK.

Less than 1.500 hours! 2 manual feeder 4 Standing-sheed feeder 1 cover-feeder 1 Hohner sticher 3-knife-trimmer stream-delivery compressor documentation

SEITAL SE30 MILK & WHEY SEPARATOR APPLICATION: CREAM SEPARATION CAPACITY: 7.000 LT/H FOR MILK SKIMMING 10.000 LT/H FOR WHEY SKIMMING MACHINE COMES WITH TOOLS AND INSTRUCTIONS BOOK

Technical data paper shredder: Manufacturer Bollegraaf Type HBS 110 - 1500 Year of manufacture 1994 Drive power 110 kW Throughput approx. 25 t/hour Dimensions of feed hopper 1,970 x 2,000 mm Dimensions of built-up machine 3,160 x 4,400 x 3,980 mm (L x W x H) Weight approx. 11.5 t Special features: The drive unit is equipped with a hydraulic fluid coupling that minimises current peaks during start-up and operation. The rotor is mounted on oversized roller bearings and equipped with replaceable hammers that are extremely wear-resistant. Range of applications: The shredder was used to shred paper, cardboard, newspapers, magazines, books, etc. in order to achieve optimum compaction and dimensional stability of the bales in the downstream baling press. Condition of the shredder: The shredder is in good working condition and will be dismantled at the end of April. Scope of delivery: Shredder ...

built 2009 - last recurring examination 10/21 - complete with test book, declaration of conformity, acceptance test, etc. - Boom 6 m, up to 400 kg - Chain hoist Star Liftket BF 021/51 500/2 - 4/1 - complete with wall brackets, cable drag, etc.

Book block size: max. 320 x 320 mm min. 145 x 105 mm Book thickness: 1 to 65 mm Cover size: max. 320 x 660 mm min. 135 x 225 mm - fully automated - LCD TouchScreen controlled - 4 clamps - PUR - Side glue - cover feeder

used saddle stitcher Brehmer 1992 year 6 stations 1 station for hard cover 1 trimmer 2 sewing heads in production

Hot melt adhesive binder Fastbind Elite XT; good condition; cleaned and tested; Format A3+; hot melt; Binding length max.455mm; Binder thickness 140-320mm; Book thickness max.40mm; Tool for soft- and hardcover. Hot melt perfect binder Fastbind Elite XT; good condition; cleaned and checked; size A3+; hot glue; Max.Book Lenght 455mm; book lenght 140-320mm; Book Thikness Max.40mm; Tool for soft and hard cover.

CNC GEAR HOBBING MACHINE LIEBHERR LC 3000 FN Year: 2010 Control : SIMENS 840D Table diameter: 2600mm Max. workpiece diameter: 3000mm Table hole: 700mm Max. table speed: 5 RPM Center distance with external cutter head: 210…2100mm Center distance with internal cutter head: 0…1800mm Workpiece load: 300kN Max. axial travel: 1200mm Cutter head swiveling angle: +/-45 degrees Original table size is 2000mm, but the factory made a new sub table and put it on top of the original table and used it. Including external milling head, chip conveyor. All manual books available. Low working hours. Excellent working condition.

Tecnograf TECNO 100 Book Stacker Printing Print Stacker Stacking Currently in stock

Sideloading cartoning machine for closing blister in corresponding folding cartons. Machine incl. GUK-leaflet folder, RONTECH booklet-feeder (built in 2015) etc. Cartoner is in line with the blister machine, type CP 400.

Cartoner for closing blister in corresponding boxes. Machine incl. GUK-leaflet folder, unit for booklet feeding system etc. Machine is in line with the blister machine, type UPS 1040.

Hole unit Horizon HP-20A (Condition - like new - hardly used) Art.: PS5567 specialized module for high-quality punching. The HP-20A module will be integrated into the Horizon brochure line between the Horizon SPF booklet maker and the Horizon FC trimmer. In normal brochure sewing mode, it acts as a simple transition tape. However, it is worth activating it on the central control panel, it is immediately included in the duty cycle.

CHP complete unit J320GS Power: 1063Kw YOM: 2007 Working hours: 61.200h Good condition Natural gas Voltage 400V/690 Switchable Scope of supply : Complete CHP unit Genset Gas train Control panels and diane XT Silincer muffler Coolers Chimney Transformer Switch breaker Steam boiler Oil system Documents Parts books Electric diagrams

3-roll hydraulic 3000x30 mm pre-pinch planetary MG model G3030 year 2021 -Plate width 3000 mm -Capacity thickness 30 mm -Pre-pinch 25 mm -width on the rolls 3100 mm -upper roll size 400 mm -lower rolls size 380 mm -Hardened rolls surface. -All driven 3rolls gear box motorized each synchronized rotation -Conical plate bending attachment , rolls tilting & contrast roller. -Operator console with directional joysticks and digital readouts -Front drop-end open hydraulic -Emergency and safety installation -User manuals and instruction books. -Electric power 25 HP on the hydraulic unit. -V400/50

Equipped with: Muller Martini 201 18 Stations Gathering Machine, Book Block Feeder, Perfect Binder Muller Martini 3006-18 with Stream Cover Feeder with 18 Stations, Hot Melt Spine And Side Gluing With Pre-Melter, Spiral Lay Down Balance or Drying Converyor to Muller Martini 3670 Three Knife Trimmer with Cassettes for Quick Change, Stacker Delivery, Max. Size: 450x310mm, Max. Speed 6.000 Cycles/Hour, Max. Size Head/Tail: 420mm, Max. Size Spine/Front: 305mm, Production: 4.000 Books/Hour, Complete with All Standard Accessories

6 Stations, Cover Feeder, Stiching Unit, Trimmer, Rima Stacker Delivery, Complete with Standard Accessories

Min. 90x130mm, Max. 320x480mm, Capacity: 14000 Cylcles/Hour, 6 Feeder Stations, 1x Cover Feeder, Stiching Unit with 2 Stiching Heads, Three Knife Trimmer, with Rima System Stacker Delivery

Min. 90x130mm, Max. 320x480mm, Capacity: 14000 Cycles/Hour, 6 Feeder Stations, 3x DVU 400 Vertical Feeder, 3x DHU 400 Feeders, 1x CHU 450 Cover Feeder, Stiching Unit ST 400 with 2 Stiching Heads, Three Knife Trimmer TR400 with Stacker Delivery

max. format 27 x 42 cm Year of construction: 1969 Book thickness up to approx. 45 mm 1 manual attachment station Milling station automatic transshipment feeder Groove device Cold glue back gluing Gauze station Pressing station Stacking delivery Delivery date: immediately from stock Price on request. We deliver and install worldwide!

Kolbus KM 472A, HD151P ZU840 year 2002 19 clamps 24 stations Trimmer Stacker roller conveyor

Vacuum lifters, vacuum lifters from Schmalz for heavy plates, sheets, etc. Load capacity 300kg horizontally and vertically Vacuum cleaner can be swivelled 90 degrees by motor 10 suction cups 370 x 85mm, suction cups partially removable Minimum dimensions of the suction cups: 1250 x 760mm Maximum size of the suction cups: 1900 x 1200mm Acoustic warning signal when the vacuum is too low 400V, 0,37kW Vacuum pump approx.8m³/h Pressure gauge to indicate negative pressure Can be attached to on-site chain hoist Swivelling and snap-in control lever, which means that parts can also be stacked very high With crane bottle holder CE mark No test book available Paint bursts reworked The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier".

3 Clamps Perfect Binder, Auto Cover Feeder with Scoring (Suction), Hot Spine Gluing & Milling & Notching Unit, Speed: Up to 1250 Books Per Hour, Book Block Format: Max. 420x290, Min. 125x105mm, Binding Thickness: 3 to 45mm, Conveyor Delivery

Self-loading truck-mounted forklift CDD05 - Electric for 500kg This self-loading electric truck-mounted forklift is suitable as a truck-mounted forklift for delivery vehicles or for trucks without a loading ramp. It automatically loads itself to the next higher level. Thanks to this special pallet truck, power and nerves can be spared during loading and unloading - especially if there is no lifting platform. This model can also be used for pure transport work up to 500 kg. It is used in logistics, goods handling and is also designed for tough everyday industrial use. Special pallet trucks for everyday industrial work Self-loading and electric Load capacity of 500 kg with a fork length of 1050mm Maximum lifting height of 1300 mm NEW - Pick-up in 74722 Book

Overhead crane with trolley, overhead crane STAHL ZL-C 125-13,60 E built: 1989 Load capacity: 12,500 kg Crane track average: 13,600 mm Cat track average: 1,400 mm Crane travel: 40 / 10 m/min Trolley travel: 20 / 5 m/min stroke: 5 / 0.8 m/min hook travel: approx. 5.8 m with test book and documentation ! Dismantled ! used, tested ! Dimensions: mm

Mini excavator Windstorm XN10 Knickarm/Knickmatic from stock new Net price plus 19% VAT Description Mini Excavator Windstorm XN10 Rhinoceros 1 Cylinder Diesel Excavator Condition: New. Articulated arm / articulated mates from stock Book available incl. Shovel 400 mm -Roof and roll bar -Tool -Hammer line -Work lights Optional: Mech. Quick coupler with 2 bolts : 260 euros Bolt for quick coupler : 10 euros Fang : 210 Euro Mech. Gripper : 320 Euro Rake : 210 Euro Hydr. Hammer : 1780 Euro Hydr. Earth auger : 680 Euro Hydr. Shovel 600mm : 520 Euro Hydr. Shovel 800mm : 590 Euro Load hook : 170 Euro Shovel 200mm : 205 Euro Shovel 400mm : 270 Euro Shovel 600mm : 310 Euro Shovel 800mm : 340 Euro Sale takes place with invoice with shown VAT. 19% VAT included in the price. 015121271265 Model WINSTORM XN10 Fire RHINOCEROS Operating Weight 850kg ...

Book block rounding machine Make Hunkeler Model BRM500 Year 1970? Width 500 mm Options up to 100 mm thickness Available Direct

Machine Details Stock-No. 1105-03900 Type of machine Machining Center - Vertical Make KAFO Type Vmc 106 Year of manufacture 2006 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Taiwan Delivery time immediately Freight basis ex stock HAGUENAU FRANCE Technical details X-Travel 1020 mm Y-Travel 600 mm Z-Travel 635 mm CNC-control FANUC - IO table-size 1250 X 600 mm spindle taper ISO 40 spindle turning speed range 10000 rpm spindle drive motor 11 kW tool change unit 24 max. table load 1000 kg throat 510 mm voltage 380 V Rapid speed 12 m/min feed range 1 - 5000 mm/min Weight of the machine approx. 4.6 t dimensions of the machine approx. 3.2 x 2.70 x 2.70 m Accessories instruction book Additional information control: FANUC - O I MC - coolant equipment CHIP CONCOYER 10000 RPM

Wire-O punching machine Make JBI Model K50T Year 1991 Workingwidth 500 mm Tools 1 x 3:1 with round holes for books, 1 x 3:1 with round holes for calenders Available Direct

Key data: 90 , 10 , 13

High quality oil screw compressor used in industrial plants, factories, production halls and larger workshops. This compressor uses direct drive, which is the most efficient way of drive. The helical stage is directly coupled to the electric motor by means of a flexible coupling. Thanks to this solution, there is no energy loss when transferring torque from the engine to the block, and energy consumption is significantly reduced. Manufacturer: AIRPOL Model: NB 90 Flow rate: 820 m3/h Pressure max. 1.0 MPa Motor power: 90 kW / 160 A Work counter under load: 27.062 h Weight: 1800 kg Year of Build: 2007 Full DTR documentation and UDT audit book with tank passport Technical condition: used machine

Three knife trimmer Stitching heads (x 4) Omega stitching heads (x 2) Feeder (x 6) Stacker (Rima) Cover feeder

Belt delivery Vertical pile feeder (3x DVU 450) Three knife trimmer (TR 400) Feeder (3x DHU 450) Cover feeder (UFA 400)