bonfiglioli italy used for sale

Working width: 400 mm; Working height: 300 mm; minimum workpiece length: 250 mm; Aggregates: 2 brushing units separately adjustable; 1. Brush: Scotch Brite Medium/Diameter 220mm, Vario Drive; 2. Brush : Scotch Brite Hard / diameter 220mm, vario drive; Height adjustment: handwheel; Height indicator: mechanical counter; Feed speed: 4 - 12 m/min; Motor power brushes: 2 x 3 kW / both with vario drive (infinitely adjustable); Engine power feed: 0.37 kW; Machine length: 1400mm; Machine width: 900mm; Weight: 500kg;

18 pieces Pallet lift Schwingshandl S-MDEPAL-01 Used goods built in 2019, very good condition, see pictures Length: 205 cm Width: 154 cm Height: 615 cm Roll width: approx. 85 cm Roll diameter: approx. 9 cm Table size: approx. 130/108 cm Payload: approx. 1000 kg 18 pieces available. Negotiation price: from € 2,000 net ex location Depending on the purchase quantity and design Dismantling will take place from April to June 2024. Location: Northern Italy. Viewing possible by appointment. Further information on request. Partial sale possible. Systems are professionally dismantled and loaded. Transport and customs clearance can be carried out by us. Assembly and programming can be carried out by partner companies. EVERYTHING HAS to go! - from location to max. End of June 2024 The following products of the plant are also available for sale: 300 x Demati ...

This DMG CTX 210 Turret punching machine was manufactured in the year 2006 in Italy and has 60050 production hours. It is equipped with a Heidenhain Plus IT DinPlus control unit. The machine disposes of a ball screw spindle, a 12-fold tool changer with driven tool and chip conveyor and a mechanical oil and emulsion mist cutter.

Working width: 400 mm; Working height: 220 mm; minimum workpiece length: 250 mm; Aggregates: 2 with fine adjustment; 1. Saw Cutting Unit Random System: Saw Cut Optics; 2. Brush : Tynex brush, grit 80, diameter 220mm; Height adjustment: handwheel; Height indicator: mechanical counter; Feed speed: 4 - 12 m/min; Engine power sawn rough: 1.1 kW; Motor power brushes: 3 kW; Engine power feed: 0.37 kW; Machine length: 1400mm; Machine width: 1400mm; Weight: 550kg;

This DMG CTX 320 linear Lathe was manufactured in the year 2008 in Italy and has 51180 production hours. It is equipped with a SIEMENS 840D control unit. The machine disposes of a spindle which has a max. speed range of 6000 rpm and a turret with 12 tool positions. It is included with a barfeed magazine.

This TRUMPF TruBend Center 7030 Bending machine was manufactured in the year 2019 in Italy and has 901 production hours. Contact us anytime for further questions

Working width: 600 mm; Working height: 220 mm; minimum workpiece length: 250 mm; Aggregates: 4 ; 1. Saw Cutting Unit Random System: Saw Cut Optics; 2. Brush : metal, diameter 220mm; 3. Brush: Tynex grit 60, diameter 220mm; 4. Brush: Tynex grit 120, diameter 220mm; Height adjustment: handwheel; Height indicator: mechanical counter; Feed speed: 4 - 12 m/min; Engine power sawn rough: 1.1 kW; Motor power brushes: 4 kW; Engine power feed: 0.37 kW; Machine length: 2800mm; Machine width: 1500mm; Machine height: 1600mm; Weight: 1500kg;

This Prima Power PLATINO HS P20L 2040 Laser cutting machine was manufactured in the year 2008 in Italy and has 33000 running hours. It is equipped with a PRIMACH control unit. Contact us anytime for further questions.

working width: 300 mm; maximum workpiece thickness: 210 mm; min. Workpiece length: 300 mm; aggregate: 2 Bürsteinheiten central adjustable; 1. brush: tynexbrush granulation 60, diameter 180mm; 2. brush: tynexbrush granulation 80, diameter 180mm; height adjustment: handwheel; read out workpiece thickness: mechanical counter; feed speed: 4 - 12 m/min; motor power brushes: 2 x 3 kW; motor power feed: 0,37 kW; machine length: 1150mm; machine width: 800mm; weight: 390;

Used BLM DINAMO 0 Tube bending machine Visible in Italy Videos available 2002

OPG MyRay Hyperion X5 3D DVT Air Wall Model Orthopantomograph Panoramic X-ray Machine Item: digital 2D/3D panoramic X-ray machine, wall model Type: MyRay Hyperion X5 3D Air manufacturer: Cefla SC, Italy Year of construction: 07/2016 Properties: - Complete examination of the two dental arches in single scan for adults and children (reduced collimation). examinations of the jaw area with maxillary sinuses; local investigations of the region concerned - High-resolution CBCT examination (80 pm) with possible single scan of the complete dentition (FOV 10x10) or scanning of various limited sections (MultiFOV) for reduced exposure in the area to be examined - short wall column - 3 light sights, autofocus (automatic adjustment of the dose to the patient) - A single 3D/2D QuickScan sensor - MRI (Morphology Recognition Technology) - 2D Focus-Free - Up to 22 2D programs - Stable ...

Iveco emergency generator 100 kVA - new - built 2023 ---> STAGE 5 EMISSION STANDARD FOR MOBILE APPLICATIONS - - - - - Engine: - Iveco (Italy) - Model series: F36 - 4 cylinders -Diesel - 1500 rpm - Displacement: 3600 cc - Emission standard: STAGE 5 - - - - - Generator: - Manufacturer: Stamford (England) - 100 / 110 kVA - 230 / 400 volts - 50 Hertz - AVR controller - - - - - Control / Start Unit: - Digital ComAp Start Unit - Manual start at the touch of a button - Automatic start function - Generator monitoring: volts, amps, hertz, kW - Engine monitoring - Hour meter - Maintenance timer - - - - - Other data: - Dimensions: 300 x 110 cm - Weight: 1650 kg - Tank volume: 170 litres - Sound level: approx. 64 dB (7m) - Fuel consumption: 23.6 l/h (75%) - Emission standard: Stage V for mobile applications - - - - - Other: - An integrated soc ...

20 hl brewhouse delivered by ANT in 2014, available - 20 hl 3-vessel, mash mixer, lautertun, brewkettle/whirlpool, steam heated, with semi-automation. - 25 hl HLT - 200 kW natural gas steam generator (made by Manara, Italy) - Plate HX for cooling wort, with aeration system and 30 l in-line yeast vessel - Glycol chiller with tank - Brewhouse platform - Malt mill (made by Sommer, Germany) - Various piping, valves etc. The equipment is of good quality

COMI RICO CCL 1900 x 900 -13T-AB thermoforming machine was manufactured in Italy in 1988. The thermoforming line, consisting of, among others, a heating station, a bulge photocell and a moulded parts conveyor, is designed for the fully automatic production of oversized parts using the thermoforming method. The COMI RICO CCL 1900 x 900 -13T-AB thermoforming machine is equipped with a gauge measuring the thickness of the platen in order to avoid accidentally taking two platens from the package at the same time. The platens, by means of transport grippers actuated by pneumatic cylinders, reach the individual work stations, i.e. the preheating station, consisting of two opposing panels, the plasticising preheating station and the forming unit. In the forming unit, the thermoforming process takes place, during which a BOTTINI GIANNI press with an upper and lower moving table peripherall ...

Code: 0116 Brand: GHERMANDI - ITALY Model: OLIMPIA 200 Bottom belt sanding machine for sanding wooden edges, profiles, battens, etc. Technical data: Working width mm 200 Table length mm 1240 Belt development mm 2000 x 200 Belt speed 17 mt/min Working table height mm 820 Motor Hp 4 Vacuum motor Hp 0,5 Overall dimensions mm 1240 x 600 x 1000 h Weight kg 350

Code: 0743 Brand: MASTERWOOD - ITALY Model: SPEEDY 207 - CE Standard Numerical control point to point boring machine for custom furniture manufacturing, kitchen furniture, bathroom furniture, and various processes - CE Standard Boring head with 5 vertical and 1 double horizontal independent chucks - Spindles rotation rpm 4500 Saw for longitudinal cuts - Saw rotation rpm 6000 Machine table with 1390 x 750 mm boring capacity and two side jump up stops handled by the control unit to execute with only one program and one intermediate hold panels up to 2800 x 750 mm size Possibility of boring 2800 mm panels Vertical pneumatic tool displacement mm 60 Max panel thickness mm 50 Vacuum pump 16 m3/h for panel clamping Vacuum cup diameter mm 80 Clamping cylinders for narrow workpieces against fixed rear stops Multitasking control complete with interactive graphic programming,  ...

Cell with TIG-OTC-NH52-NEFC welding robot Country of origin of the cell: Italy Year of production of the cell: 2017 Country of origin of the robot: Japan Brand: OTC NH5 Year of manufacture: 2016 Number of axes: 6 Reach: 866 mm Load capacity: 5 kg Control: OTC FD 11 Source: OTC DA 300-P Cell dimensions: Length 3500 mm 1900 Width mm Height 2400 mm

Roller shutter drive, with geared motor and control system ALBANY, ASSA ABLOY Gate type: RP2000 1,1 kW, 40 rpm hollow shaft diameter: 30 mm, shaft length: 120 mm, groove width: 8 mm Control: Type MCC Voltage: 400 V 3AC 50 Hz Power: max. 3 kVA IP55 gearbox: BONFIGLIOLI Type A 10 2 UH30 S2 Gear ratio: 35,1 Engine: ALBANY Type M2SB4FDSD 0,75 kW, 1400 rpm 230 / 400 V 3AC 50 / 60 Hz Control box: RITTAL Type AE1033.009 used, tested ! dimensions ( control ): 440 x 225 x 125 mm Dimensions ( geared motor ): 560 x 115 x 280 mm Dimensions ( control box ): 300 x 300 x 210 mm Dimensions ( transport ): 800 x 600 x 300 mm

Gearbox, angular gear BONFIGLIOLI HDP70 2 LP LL XAD 200 i = 19,4 hollow shaft Drive: Ø 55 mm flange Drive: Ø 400 mm shaft Output: Ø 80 mm New ! Dimensions: 630 x 450 x 400 mm

Tribloc (rinser-filler-capper), with vacuum pump pre-evacuation, manufacturer: Cime Careddu Italy, type Gold DPS 6-6-1, 6 rinsing nozzles, 6 filling valves, 1 head crown corker, year of construction: 2019, capacity 350-1,200 bph with height adjustment, with 3 bottle formats, with labeler self-adhesive labels, with bottle transport, turntable. Isobaric. Total hours: approx. 200 hours. Tribloc (Rinser-Filler-Crowner), with vacuum pump, pre-evacuation, Made by: Cime Careddu Italy, Type: Gold DPS 6-6-1, 6 head rinser nozzles , 6 filling valves, 1 head crown corker, Year: 2019, Capacity 350-1.200 bph, with hight adjustment, with 3 bottle formats, with labeller self adhesive labels, with bottle conveyors, rotating tables. Isobaric, About 200 operating hours.

Gearbox, angular gear BONFIGLIOLI HDP70 2 LP RR XAD 200 i = 19,4 hollow shaft Drive: Ø 55 mm flange Drive: Ø 400 mm shaft Output: Ø 80 mm New ! Dimensions: 630 x 450 x 400 mm

MECAL MC302 GEOS-5 aluminium profile machining centre was built in 2014 in Italy. The machine, characterised by high structural rigidity, quality components and a longitudinal working area with a sliding workstation, is used for milling, drilling, threading and cutting profiles made of aluminium alloys, plastics and steel. Thanks to the sliding workstation, the MECAL machining centre can perform machining on a single work area as well as inside 2 separate work areas, resulting in a significant increase in speed and productivity of the manufacturing process. All 5 axes (X,Y,Z,A,C), driven by motors with digital systems, move on automatically lubricated precision guideways. The clamps holding the workpiece during machining are equipped with an independent power supply system which allows positioning and automatic repositioning of all of the clamps in a very short time. The MECAL GEOS-5  ...

Transmission TRASMITAL BONFIGLIOLI 3 01 L2 51,8 HC P80/S A F ( 301L251,8HCP80/SAF ) DT301L2051003 i = 51.8 hollow shaft Drive: Ø 19 mm Flange diameter: Ø 200 / 130 mm bolt circle diameter: Ø 165 mm 4x thread M10 x 1.5 / 8x bore Ø 20 mm shaft Output: Ø 50 mm Flange diameter: Ø 184 / 110 mm bolt circle diameter: Ø 165 mm 8x bore Ø 10.5 mm used, tested ! Dimensions: 355 x 200 x 200 mm

Transmission TRASMITAL BONFIGLIOLI 301L251.8HCP90AU05F 2T301L2051A03 i = 51,8 hollow shaft Drive: Ø 24 mm Flange diameter: Ø 200 / 130 mm bolt circle diameter: Ø 165 mm 4x thread M10 x 1.5 / 8x bore Ø 20 mm shaft Output: Ø 50 mm Flange diameter: Ø 184 / 110 mm bolt circle diameter: Ø 165 mm 8x bore Ø 10.5 mm used, tested ! Dimensions: 355 x 200 x 200 mm

Gear motor with brake, roller shutter drive BONFIGLIOLI Type: A102 NH30 S2 6977/1000 1,1 kW 132 rpm 230 / 400 V IP55 Hollow shaft diameter: Ø 30 mm used, tested ! Dimensions: 560 x 160 x 230 mm

EUROMAC MTX INDEX 1250/30 punching machine was manufactured in Italy in 2008. The machine used for punching in various types of sheet metal, achieves the highest precision and accuracy in machining, thanks to its capacious turret head and high press force of 30 tonnes. The process is performed on a large brush table, which significantly reduces noise level and protects the workpiece surface from scratches and nicks. The EUROMAC 1250 hydraulic punching machine is controlled via a FabriWIN CNC 68 controller with many useful functions. For transport of the machine, tables 4,5,6 are removed and the holding bar is rotated by 90°. Technical specifications of EUROMAC MTX INDEX 1250/30 punching machine - press force: 30 t - feeds in X axis: 1250-2000 mm - feeds in Y axis: 1250 mm - automatic repositioning in the X axis: up to 10000 mm - working speed (cutting, stroke 20 mm): 780 1/min  ...

Gear motor BONFIGLIOLI RIDUTTORI C212 P S2 ( C212PS2 ) Engine: M2SB4 1,1 kW 98 rpm 230 / 400 V IP55 shaft diameter: Ø 25 mm IP55 Motor and gearbox: aluminium housing used, tested ! Dimensions: 460 x 200 x 175 mm

COMPLETE NON-CARBONATED ASEPTIC (PRESERVATIVE-FREE) UHT FILLING LINE FOR DRINKS In its current state, our innovative line is suitable for the preservative-free production and bottling of all kinds of heat-treatable, non-carbonated soft drinks, e.g. vitamin drinks, filtered/low-fiber juices, tea-based drinks (brewed from real leaves), plant-based milks/drinks, etc. The production line is a compact, fully equipped system, from bottle-blowing to water treatment to shrink wrapping, all production stations are integrated in the line. The entire production line is a coordinated system, made of the highest quality stainless steel (316L), which can be cleaned with a built-in CIP system. Apart from its main elements, it is completely individually designed and controlled by PLC. The plant is installed and in excellent regularly maintained condition. Products: vitamin drinks, filtered/ ...

Gear motor BONFIGLIOLI RIDUTTORI 97.9 rpm engine: M2SB4 1,1 kW 1400 rpm 230 / 400 V 3AC IP55 Gearbox: C212 P S2 ( C212PS2 ) i: 14,3 shaft diameter: Ø 25 mm Gear foot: 155 / 150 x 137 mm hole spacing ( parallel to the shaft ): 60 / 48 mm hole spacing ( transverse to shaft ): 130 mm hole diameter: Ø 10.5 mm sprocket: Ø 70 / 57 mm, chain width: 8 mm, teeth: 16 Motor and gearbox: aluminum housing used, tested ! Dimensions: 460 x 160 x 220 mm

Gear motor BONFIGLIOLI RIDUTTORI 96.6 rpm engine: M2SB4 1,1 kW 1400 rpm 230 / 400 V 3AC IP55 Gearbox: C 22 2 P 14.5 S2 B3 ( C222P14.5S2P3 ) i: 14,5 Shaft diameter: Ø 25 mm Gear foot: 155 / 150 x 137 mm hole spacing ( parallel to the shaft ): 60 / 48 mm hole spacing ( transverse to the shaft ): 130 mm hole diameter: Ø 10.5 mm sprocket: Ø 70 / 57 mm, chain width: 8 mm, teeth: 16 engine and gearbox: aluminum housing used, tested ! Dimensions: 460 x 160 x 220 mm

Gear motor BONFIGLIOLI RIDUTTORI 96,6 rpm motor: M2SB4 1.1 kW 1400 rpm 230 / 400 V 3AC IP55 gearbox: C 22 2 P S2 ( C222PS2 ) i: 14.5 shaft diameter: Ø 25 mm Gear foot: 155 / 150 x 137 mm hole spacing ( parallel to the shaft ): 60 / 48 mm hole spacing ( transverse to the shaft ): 130 mm hole diameter: Ø 10.5 mm sprocket: Ø 70 / 57 mm, chain width: 8 mm, teeth: 16 engine and gearbox: aluminum housing used, tested ! Dimensions: 460 x 160 x 220 mm

Robotic industrial cell with BLM Dynamo-E tube bending machine Industrial cell consisting of: automatic bar feeder BLM CRMA7, Industrial robot Fanuc M16IB20, Tube bending machine BLM Dynamo-E year of manufacture 2007, machine number 200016, 2 handle conveyors, with photoelectric control, Resistance welding machine, Constructione Italy, PPN83, machine number QM328001, 2 resistance welders, Constructione Italy PPN83, Donation tape. The whole is fenced with networks controlled by Siemens with CE certification Link to the video – https://youtu.be/y5yYJQhkrRw

Tribloc (rinser-filler-capper), pressure filler, isobaric, with vacuum pump pre-evacuation, manufacturer: Cimec Italy, type DPS 20-24-3, 20 rinsing nozzles, 24 filling valves, 3 head crown corkers, year of manufacture: 2013, with height adjustment. Tribloc (Rinser-Filler-Crowner), counter pressure, isobaric, with vacuum pump, pre-evacuation, Made by: Cimec Italy, Type: DPS 20-24-3, 20 head rinser nozzles , 24 filling valves, 3 head crown corker, Year: 2013, with hight adjustment

Key data: 410 mm, 2600 mm, 4 St.

SCM planing machine F410 Product name: Planing machine Type: F410 Manufacturer: SCM (Italy) Machine number: AB.43770 Year of manufacture: unknown Condition: used, revised and checked Technical details: -Total length of both tables: 2,600 mm - Length of feed table: 1,450 mm - Length of acceptance table: 1,150 mm - Planing width: 410 mm - Diameter knife shaft: 120 mm - Number of planing knives: 4 pieces Tersa knives - Blade shaft speed: 5,000 rpm - max. chip removal: 5 mm - 1 x suction nozzle, diameter 120 mm - 1x joining stop (length: 1,100 mm, height: 170 mm, tiltable 90° - 45°) - 1x folding stop Engine data: - Voltage: 380 V - Current: 6.5 A - Frequency: 50 Hz - Power: 5.5 kW - Speed: 2,800 rpm Machine dimensions (set-up dimensions) L x W x H: 2,600 x 1,200 x 1,050 mm Transport dimensions (L x W x H): 2,700 x 1,200 x 1,200 mm (on pallet) - Number o ...

Key data: 80 mm, 80 mm, 80 mm

Profile bending roll shafts output 80 mm brand Sergi Italy model PP type SER80CI year 2001 machine reversible can work with vertical shafts/horizontal shafts electric power 10Hp on the hydraulic centralized unit voltage 380 /50 -output shafts 80 mm -rollers diameter 250 mm -rollers interchangeable in 3 pieces each shaft to seat and copy the different shape of profiles -Powered driven the 3 shafts dragging with hydraulic motor and planetary gear-unit -Dual rolling speed fast/slow. -Rollers gap adjustable with front head screw modern system. -Pinching pyramid configuration each shaft individual move hydraulic. -Lateral correctors / straighteners left and right side with double contrast rollers. -Centralized control panel movable on wheels with all electric commands. -Digital position readout with position memory setting of the pinching rollers -Safety devices in com ...

Magnaghi T12, 2-roll thread rolling machine, new electrics, new auto plunge, This machine can be inspected in our warehouse. Mimu Machine Tools (Italy)

DECKEL S11, universal tool & cutter grinder, under power in our warehouse, Mimu machine-tools (Italy)

Working width: 600 mm; Working height: 280 mm; minimum workpiece length: 250 mm; Aggregates: 2 brushing units centrally adjustable and each with individual fine adjustment; 1. Brush: Metal brush diameter 220mm; 2. Brush : Tynex brush, grit 80, diameter 220mm; Height adjustment: electric; Height indicator: mechanical counter; Feed speed: 4 - 12 m/min; Motor power brushes: 2 x 4 kW; Engine power feed: 0.37 kW; Machine length: 1.5m; Machine width: 1.5m; Weight: 700kg; On this machine, the brushes can be swivelled diagonally to the feed direction, this breaks the edges, similar to oscillating brushes.

(3) Mikrosa SASL 5 CNC (size similar to Kronos M, MX, L) CNC overhaul and retrofit in progress full overhaul and CNC retrofit (pending) komplett Ueberholung + CNC retrofit Grinding wheel 500mm wide x 610mm dia. CNC 5 axis / 5 axis Mikrosa SASL 5 CNC complete overhaul and retrofit Grinding wheel 500 x 610 mm Regulating wheel 400 x 650mm Fixed center Complete mechanical overhaul Complete electrical overhaul Elimination of hydraulic movements Application CNC Siemens 840D 5 axes controlled in position with digital brushless motors: - Operating wheel axis motor with optical scale - 4 dressing axes: 2 on the grinding wheel, 2 on the regulating wheel - rotating axis with adjustable speed motor on regulating wheel - rotating axis with 55kW AC motor with inverter on grinding wheel to adjust RPM / peripheral speed (m/sec) Set-up for through-feed grinding and still customizable according to custome ...

Code: 0806 Brand: HIRZT - ITALY Model: B 300 - CE Standard Automatic edge bander for pre-glued edges in strips or rolls: melamine, plastic laminates, veneer, etc . up to 3 mm thickness - CE Standard Composition: Motor V. 220 single-phase Pneumatic end cutting unit (shear) front and rear Blower with air filter - Power 440 W Trimming copying unit with adjustment from the outside - Motors 220 x 2 W - Trimmer speed rpm 10000 End cutting finishing unit with foot control N° 20 rollers inclined on the plane Feed motor 13 wheels V.200 single-phase - Speed 4,7 mt/min Max edge thickness mm 3 Panel thickness min/max 10/50 mm Min panel dimensions mm 70 x 140 Total absorption Kw 3,8 Digital thermometer 10-350 degrees Extensible front support Overall dimensions mm 1800 x 700 x 1300 h Weight kg 250

Ref. -No.: 10317 Manufacturer: NOSOTTI Type of control: Digitalanzeige - Mini wizard Control: Konventionell Storage location: Halberstadt Country of origin: Italy Tip length: 3000 Centre Height: 260 mm

Wentzky 4R150 (Graessner), lapping machine, dia mm 1500, 4 rings (I.D. 535 mm), This machine can be inspected under power in our warehouse Test run possible Mimu Machine Tools Gussago BS Italy, Lapping is a [machining](https://en.wikipedia.org/wiki/Machining) process in which two surfaces are rubbed together with an [abrasive](https://en.wikipedia.org/wiki/Abrasive) between them, by hand movement or using a machine., This can take two forms. The first type of lapping (traditionally called [grinding](https://en.wikipedia.org/wiki/Grinding_machine)), involves rubbing a brittle material such as [glass](https://en.wikipedia.org/wiki/Glass) against a surface such as [iron](https://en.wikipedia.org/wiki/Iron) or glass itself (also known as the lap or grinding tool) with an abrasive such as [aluminum oxide](https://en.wikipedia.org/wiki/Aluminum_oxide), [jewellers rouge](https://en.wikipedia.or ...

Ref. -No.: 10235 Manufacturer: VIOTTO Year of construction: 1985 Type of control: Konventionell Control: N/a Storage location: Halberstadt Country of origin: Italy Serial no.: 1024 Further information: disc grinder

Mori Seiki ZL 203 CNC lathe 4 axis live tools Mori Seiki CNC model MSC501 CNC Main spindle nose ASA 6 Main spindle power 11 Kw Chuck 210 mm Main spindle bore 51 mm Turning diameter 510 mm Turning length 752 mm Number of RPM of the main spindle 4000 Number of tool holder turrets 2 Number of tool places first turret 12 Number of live tools first turret 12 First turret X-axis travel 235 mm Z axis travel first turret 520 mm Number of second turret tool places 8 Number of fixed tool places for the second turret 8 Second turret X-axis travel 175 mm Second turret Z-axis travel 490 mm Linear axis rapid feeds X Y Z 24 m/min Tailstock yes Automatic positioning Presetting yes Number of live tool holders supplied 7 Number of fixed tool holders supplied 28 2003, Mimu machine tools Italy

Oto Mills 127x5mm HF tube mill Make: Oto Mills (Italy) Year New: 1999 Tube Diameter: 38mm – 127mm Wall Thickness: 0.9mm – 5mm Speed: 100 meters per minute Direction: Right to Left Tooling: Round, Square, Rectangular Entry Coil Car Shear & End Welder Driven Pinch Rolls Coil Straightening Machine Pit Type Accumulator Forming Mill 250Kw Emedi High Frequency Welder 2-Roll Adjustable Welding Box Cooling Section Sizing Mill Four (4) Adjustable Turk Heads Cut – Off Type: Flying Saw Driven Exit & End Tables Electrics, Hydraulics, Controls, Lots of Tooling, Drawings & Manuals, Spare Parts Line is still installed but not operational. Possible to inspect

CNC multi spindle bar automatic, Gildemeister GMC 35 ISM, - 6 integretat spidles with C-axis, - 5 compound slides pos. 1; 2; 3, 4; 5;, - intipendend feed for central block, - douple slide in pos. 6, - pick-up spindle in pos. 6, - 5 frontal spindles, rotating, with internal coolant supply, ISO 40, - swarf conveyor, - Fire fihthing system CO2, - ARTIS tool breakage control system, Stangenlademagazin :, Cucchi Pietro PB 41 Compact, Country of origin: Italy, Control: Siemens 840D, Operating hours: 56.000, Number of spindles: 6, Max bar diameter [mm]: 35, Spindle speed [rpm]: 6.000, Spindle motor [kW]: 21, Total power requirement [kVA]: 107, Auto bar loader: Cucchi Pietro PB 41 Compact

This is a Hammer Mill from Nuova Guseo Italy in great working condition. This Griding Machine, has been recently been refurbished and works perfectly for many applications. 15kw Motor 9 X 4rows = 36pieces of hammers with 6mm thickness Hammers can be turned and used 4 times to all 4 sides Amperage indication on the panel 10 different sieves (9 in the photos one is installed) with diameter Φ1.5mm, Φ2mm, Φ8mm, Φ15mm, Φ16mm, Φ22mm, Φ25mm, 2pcs X Φ30mm. HAMMER MILL – SERIES RAPIDE Between all size reduction equipment, hammer mills are more widely used than any other to grind minerals and fodder. Now thanks to some special features of the mills series RP, they can be used in foodstuffs and chemicals industries too. Of simple, yet robust design, the hammer mills are suitable to meet the most medium size reduction requirements. They can be used to mill various mater ...

Diatomaceous earth filter Company Cadalpa / Italy Type C18/80 Simplex Capacity 2,500 l/h Built in 1985 Further information and price on request

Code: 0351 Brand: CABO - ITALY Model: 3200 Automatic double end tenoner with tilting blade and scoring unit for panels, furniture, custom-made furniture, kitchens, composite materials, aluminium, acoustic panels Technical data Maximum cutting width mm 3200 Maximum cutting length mm 3200 Minimum distance between blades mm 300 Maximum cutting height mm 100 Maximum diameter of blades mm 300 Maximum diameter of scoring unit mm 200 Blades inclination 0-45° Blade motor power Hp 5 each Automatic feed carriage with variable speed Automatic opening between blades Scoring motor power Hp 1 each Pneumatic workpiece clamping Overall dimensions of assembled machine: mm 4200 x 4500 x 1200 h Overall dimensions for transport: mm 4500 x 300 x 1000 h + mm 4200 x 1100 x 1000 h Weight kg 1700

Conveyor belt, belt conveyor, conveyor belt, belt conveyor, incline conveyor, incline conveyor, chip conveyor, chip conveyor -Conveyor belt: on mobile base -Speed: 30m/min -Conveyor belt width: 115 mm -Conveyor belt length: 1625 mm, dimensions see photo techn. drawing -Height: 810 mm -Propulsion: Bonfiglioli 0.37 kW -Individual components: see photos -Total dimensions: 1645/600/H915 mm -Weight: 62 kg