bonfiglioli italy used for sale

Planetary winch gear, hydraulic motor, oil motor, hydraulic pump, hydraulic gear motor, drive unit, axial piston motor - Manufacturer: Quadrangle, hydraulic motor drive unit -Type: 1302027STB1-0 -Operating pressure: 350 bar -Hydraulic motor: Rexroth A2FE125 / 61W-VAL 181 -Planetary gear: Bonfiglioli 715 C 3 B15FO129J2 -Individual components: see photos -Number: 2x unit available -Price per piece -Dimensions: 820/550 / H840 mm -Weight: 587 kg / pc.

Planetary winch gear, hydraulic motor, oil motor, hydraulic pump, hydraulic gear motor, drive unit - Manufacturer: Quadrangle, hydraulic motor drive unit -Type: 1302027STB1-0 -Operating pressure: 350 bar -Hydraulic motor: Rexroth A2FE125 / 61W-VAL 181 -Planetary gear: Bonfiglioli 715 C 3 B15FO129J2 -Individual components: see photos -Number: 2x unit available -Price per piece -Dimensions: 820/550 / H840 mm -Weight: 587 kg / pc.

Gear motor, electric motor, three-phase motor -Gearbox manufacturer Bonfiglioli type: MVF44/F -Manufacturer motor SME type: FC63B -Speed: 100 rpm -Power: 0.18 kW -Construction: B14 angle -Diameter hollow shaft: 18 mm -Protection class: IP 44 -Dimensions: 310/140/H185 mm -Weight: 6.65 kg

Key data: 280 , 350 , 400

Brand New Power 350kva Cummins Nta855G1B Engine with Mecc Alte Italy Alternator with Deep-sea UK Control Panel Available in stock..

Key data: 280 , 350 , 400

Brand New Power 280kw 350kva Cummins Nta855G1B Engine with Stamford Italy Alternator with Deep-sea UK Control Panel Available in stock..

Key data: 160 , 200 , 400

New Gensets 180KVA PRIME, 200KVA STANDBY, ENGINE Cummins 6CTAA8.3-G2 With Marali Motri Italy alternator, with deep-sea UK control panel system..

Geared motor BONFIGLIOLI, SIEMENS 73.4 rpm motor: 1LA7080-4AA11 0.55 kW 1395 rpm 230 / 400 V 3AC 50 Hz 60 Hz - operation is possible ! IP55 gearbox: VF 63 P1 P80 B5 ( VF63P1P80B5 ) i: 19 Hollow shaft diameter: Ø 25 mm wavelength: 120 mm groove width: 8 mm 2x Flange diameter: Ø 75 / 110 mm, bolt circle diameter: Ø 90 mm 8x Threaded hole: M8 x 1,25, Depth: 15 mm Intermediate flange diameter: Ø 115 / 180 mm, Bolt circle diameter: Ø 147 mm 4x Hole diameter: Ø 11 mm Motor and gearbox: Aluminium housing New ! Dimensions: 420 x 220 x 250 mm

Motordumper Motorjapan with built-in bitumen cooker Mastic asphalt dumpers are used to transport mix from the truck to the construction site. The cooker has space for 2 gas cylinders and a hydraulic agitator, the tank has a high-tilt function for emptying The vehicle has been sitting in the dry for several years, battery is defective Engine runs pre-glow and starts immediately. The chassis is manufactured by the company Messersi from Italy, the company still builds dumpers today The body is built by the company Kohlberg /Röhrs Biespingen, so it is already a professional device, nothing self-knitted, the company is a leading manufacturer of bitumen cookers and mastic asphalt dumpers Unfortunately, the brake is probably slightly fixed from the idle time, but should not be a problem for screwdrivers It is equipped with a two-cylinder diesel engine and has a 4-speed gearbox Sale wi ...

Closing force: 180 T Platen dimensions: 1 020 x 1600 mm Max. mould height : 2000 mm Max. mold width : 1200 mm Min. mold thickness: 840 mm Max. mould opening stroke: 895 mm Screw diameter : 120 mm L/D ratio : 28 Max. injectable volume: 25 liters Number of parison programming points : 100 Die Diameter (min/max): 190/450 Voltage: 380 / 50

Ribon RUR1500 metric, Italy made, universal OD/ID grinding machine, in very good condition, with low hours. The machine has electric table movement, and sold with many accessories. Now stock clearance, price reduced by 15% from 9350 to 7950 EUR net! (2020.07.12.) EXW price, loaded for free on suitable truck. EU shipping at very friendly prices. Please ask if any questions. B/C: 1500mm Max. grinding diameter: 320mm Centre height: 160mm Max. weight suspended between centres: 170Kg Size of the grinding wheel: 355 (410) x 32 (60) x 127mm (The cover could take 455mm wheel) Work spindle bore: 24mm Work spindle taper: Morse 4 Taper of centre support: Morse 3 Speed of wheel: 1500/ 1730 RPM Work spindle speed: 35-310 F p. perc one increment on X wheel: 0.005mm Table swing: + - 5° Work spindle housing swing: -30° és + 90° ID spindle diameter: ...

Offered are unused right-angle gears, partly in a wooden box! Manufacturer: Brevini (Reggio Emilia-Italy, 42100 Via U. Degola, 14 / Riduttori SpA -Germany representation, 45549 Sprockhövel) 1 piece Type: EC 3065 / FE Output i=56 Input 48.82 1 Piece Type: EC 3065 / F Output i=56 Input 48.82 To be delivered individually or completely.

Machine has been produced by Baykal Bursa Cutting area : 4000 mm x 2000 mm KMT pump 100 HP American made KMT pump and cutting head Machine can change tools while it is working CNC and software made in Italy

Producer: OMAS S.r.l Origin: Italy Condition: Used Model: ICS / 1B Production Year: 2004 Production Capacity: 6 pcs / per minute

For sale a CNC cylindrical (roller) feeder for an eccentric / hydraulic press, type: srf 120.1250, manufactured by Cattaneo, Italy, 2003. The feeder is in perfect condition - like new. Maximum thickness of the supplied sheet metal: 8mm, sheet width: 1250mm, total weight approx. 4500kg. The machine is currently dismantled, all on 5 pallets.

- table is 12x2 m - air filtration sistem is in the price (TAMA - Italy) - 8 cylindrical filters - the filters currently installed inside are only 6 months old - it has a possibility of self cleaning the filters

Press brake from 1994 that worked until 2021 and was regenerated in 2022. Available from this month in Italy (Bergamo area) Synchronized hydraulics MODEL PIS 2032/41 FAC, useful bending length 4.100 mm, adjustable working force 200 Ton, maximum return force 32 tons, recess in the uprights 350 mm, passage between the uprights 3.200 mm, adjustable stroke 200 mm, automatic flexion compensation, - REGENERATION 2022 - includes: - CNC 6 axis STEP AUTOMATION SA17 color touch screen videographic complete with hanging hood - Adjustment of the electrical system - Machining of the upper blade holder for Schiavi type attachment - Supply of n. 20 Intermediates complete with double bracket - Reworking of the die holder bench boring machine - Restoration of accident prevention safety devices, front Laser Beam photocells on the bending line, mechanical guards on the recesses and on the back.  ...

Expansive Work Area: 2,720 x 926 mm, accommodating a variety of woodworking projects. Versatile Material Handling: Capable of processing materials up to 50 mm thick, allowing for diverse applications. Comprehensive Drilling System: Equipped with 4 X-axis drills, 2 Y-axis drills, and 13 vertical drills, ensuring precision in every task. High-Performance Milling Head: A robust 5.5 kW milling head with an MK2 - ISO30 tool holder, designed for superior precision and durability. Optimized Power Supply: Functions on a 14 kW, 380 V, 20 A, 50 Hz power supply, tailored for efficient operation. Pneumatic Supply Requirements: Requires a minimum pneumatic supply of 7 bar, ensuring smooth and consistent machine performance. Manufacturer Overview: The Biesse Rover 321R is crafted by Biesse Group, a global leader in technology for processing wood, glass, stone, plastic, and metal. Founded in Pes ...

Injection molding machine BM-BIRAGHI model HORIZON 4370/650, Italy, 1985 Clamping force - 650 tons. Injection volume - 2000 cm3. The maximum injection pressure is 150 bar. Distance between columns 800x800mm. New screw pair f.90 mm.

Sintesi 200 injection molding machine, complete with TRIA crusher Production - Italy. It is in working order, but the processor is faulty (partially replaced by a relay); Locking force in tons - 200 T; Flow diameter 50 mm; Dist. X between posts 530 mm Dist. Y between columns 530 mm Serving size 442 cm³ Serving weight 546 g Material pressure 2058 bar Plate length 790 mm Plate width 790 mm Bimetal screw No Equipped with robot No Robot interface si Number of heating zones 5 Press inlet 650 mm Length x width x height 6200.0 × 1430.0 × 2260.0 Weight 9000 kg

BMB Model MC 350 PL Year of manufacture 1994 Origin Italy Closing Unit Closing Force 3500 Kn (350T) Inner width between columns (hxv) 900x625 mm Mold opening way 700 mm Min. Mold height 200 mm Pusher distance 300 mm Pusher forward force 100 Kn Injection Unit Screw diameter 70mm L / D ratio 24 Volume 1450 Cm3 Weight (PS) 1300 g Pump power 55 kw Heater power 32.5 kw Weight ca. 16.5 t Width x Height 1850x2450 mm

Refrigerator Eurochiller, model GCA045 Production - Italy. Issue 2008. Working. the plate heat exchanger was replaced with a shell-and-tube heat exchanger, a vibration damper was installed. Volt 400 HZ 50 kw 18.5 A 34 Vaux 24 VI 500 IP 54 Gas R407c Air Condenser 25C Water Process 15C PS Alta/bassa, Hogh/Low Gas 27/22 bar TS Lato alta, High Side -10C/+95C TS lato Bassa, low Side -10C/+55C

This advanced packaging machine is designed to efficiently and precisely fill plastic or glass jars with bulk products. Made in the USA, this machine automates the entire packaging process, including jar retrieval, product dosing, membrane sealing, and cap tightening. With a production capacity of approximately 1500-2000 jars per hour, it is ideal for high-volume production. Heres a detailed overview of its functions: 1. Jar Retrieval: The machine features an automated system for handling both plastic and glass jars. Jars are picked from the supply and positioned for the filling process. 2. Product Dosing: Equipped with a highly accurate dosing system, this machine ensures precise filling of the jars with bulk products such as spices, coffee, tea, grains, or sugar. The dosing system can be adjusted to meet specific product weight or volume requirements. 3. Membrane Sealing: A ...

175kva Prime 200kva Standby Cummins ENGINE 6ctaa8.3-G2 With Marali Motori Italy Alternator with digital Deep-sea Controller Panel Generator Set available in stock.

Model: 25tm Power supply: 380 V / 50 Hz Speeds: 2 Country of origin: Italy

Code: 0332 Brand: AMASPRES (ITALY) Model: 3000 Membrane press Working size: mm 3000 x 1300 Opening mm 500 Working height mm 250 Cover opening and closing with vertical pneumatic pistons This press is suitable for veneer of shaped pieces , such as window sash frames, curved pieces Upper heating with hot air Heating of lower side with hot air Consuption about 9 kwt Working cycle: about 10 min. Complete compressor for lifting of cover and under cover Processing prevacuum adjustable up to 6.5 atm The machine is equipped with time alarm, thermostat, thermometer, warning lights for calories and pumps Overall dimensions press mm 4100 x 1700 x 2050 h - Weight kg 1800 Overall dimensions depressor mm 1400 x 500 x 900 h - Weight kg 100

Code: 0198 Brand: MABO - ITALY Model: DELTA - CE Standard Belt sanding machine with double goose neck for wood, metal, aluminium, composite materials - CE Standard Table length mm 3000 Table width mm 800 Automatic table lifting - Vertical stroke mm 550 Motor 2 speeds rpm 1400/2800 - Hp 3/4 Pulley diameter mm 200 Suction motor Hp 0,5 Emergency rope Suction mouth diameter mm 120 Overall dimensions mm 4400 x 1100 x 1550 h Weight kg 420

Serial No.: 1704 Punching capacity: Ø 28 x 16 Available with special tools: Ø 100 x 4 Year of construction: 1997 Country of origin: Italy

Flash pasteurizers Easybräu / Italy Type:- Capacity 1,000 l/h Operating pressure 6bar Test pressure 7.5bar Electrics PLC controlled Year of construction 2020 Further documents and price on request

DAEWOO PUMA 300 LB (Doosan), 2-axis CNC lathe, CNC Fanuc 18T, Hydraulic tailstock, Condition: very good. This machine can be inspected in our warehouse, under power., Mimu machine tools Italy

Key data: 5000 mm, 4000 mm, 22000 mm

Flat top lathe with plate frame (heavy duty lathe) - Machine was overhauled in Italy in 2014 and stored directly - new electrics (control cabinet, cabling) - Max. turning diameter over the bed carriage 4000 mm - Max. turning diameter 5000 mm - Max. turning length: 22000 mm - Face plates speed range 0.9 - 56 1/min - Face plate diameter 4420 mm - Main motor power 30 kW - Max. torque at face plate 61803 Nm - Max. workpiece weight between tips: 20 t - Max. workpiece weight flying: 12.5 t -two bed slides with 4500 mm swivel length - complete with panel panels - a roller trestle - a tailstock After the overhaul, the lathe was no longer put into operation, but stored directly. The machine is dismantled and stored dry in a hall near Hamburg. The machine can be viewed by appointment. The machine is loaded free of charge with an indoor cran ...

Gildemeister GMC20 ONE, Options / Accessories, - 5 Cross-slides pos. 1;2;3;4;5, - 2 Radial slides pos. 6 for cutting and rear-working operations, - 1 C-axis for the pick up spindle, - Pneumatic work-piece unloading chute for pos. 6, - Work-piece conveyor belt, - Swarf conveyor, worm type, - 5x Frontal tool spindle, fix, - Pick- up spindle in pos. 6, - High pressure coolant device 70l / 50bar, Country of origin: Italy, Control: Siemens 840D, Number of spindles: 6, Max bar diameter [mm]: 25, Spindle speed [rpm]: 6.000, Spindle motor [kW]: 9,1, Z - travel [mm]: 70 / 140, Total power requirement [kVA]: 98, Weight of the machine ca. [kg]: 9.800, Auto bar loader: Cucchi Giovanni DBM.625

Aseptic Production and Filling Line for Non-Carbonated Drinks 2500 bph This production line is designed for the preservative-free production and bottling of all kinds of heat-treatable, non-carbonated soft drinks, e.g. vitamin drinks, filtered/low-fiber juices, tea-based drinks (brewed from real leaves), plant-based milks/drinks, etc. This line is used for green tea based drinks, flavoured with various fruit juices. Production equipment includes two tea brewing vessels, mixing tanks, UHT pasteurizer, product filter, water treatment plant with reverse osmosis, oxygen generator and product tank which are the part of the delivery. UHT pasteurizer is heated with thermal oil boiler. The filling line is semiautomatic (blow moulder operation, empty PET bottle feeding and palletizing is made manually). Current owner designed the line from individual machines and rebuilt aseptic filling block ...

Dowel hole drilling device: pitch 16, 22, 25, 32; Drilling depth: 150 mm; Slotted hole length: 250 mm; Height adjustment: 145 mm; Motor power: 1.5kW; Speed: 1500 / 3000 rpm; Extraction connection: 100 mm; Machine length: 1280 mm; Machine width: 960 mm; Weight: 160 kg;

Control:Renishaw UCC 5.5 Accuracy of the measurement (4,5 + L/200) ?m Manual Probe Heads Renishaw MH20i Axis travel range: X 700 mm Y 700 mm Z 500 mm reference sphere included Erowa clamping system is available Made in Italy

Complete beer production system with 3 hl brewhouse. In detail: 1 3hl cooked room, Simatec brand, year 2015, consisting of mash vat, boiling vat and filter vat, heated by steam with instantaneous exchanger for sparge. Quadro PLC cooking room. 1 Pump trolley composed of a screw pump for transferring must and a centrifugal pump for washing. 1 open-top fermenter 12 hl Simatec 2 Simatec 6 hl open top fermenter 1 10 hl Socis truncated cone fermenter 1 Thermindus steam boiler 75kw/steam, patent-free, 1 Chiller Frost Italy SIAL R 9 COOLING CAPACITY KW 7.3 1 Tank control panel Complete system 1 100 liter cold water storage tank. With secondary pump 1 Labeling machine with batch and expiry hot stamper 1 AUT water softener. CRO. ELE. T581SIMPLEX COMP. 50 LT1 1 Three-phase belt compressor Fiac AB 200/515 T ? 1 reverse osmosis system 1 Engl Derby mill 1.5kw/380v/950u with pedestal a ...

Tube forming mill OME 320x8mm (A3782) Tube forming mill OME 320x8mm (A3782) for tube production of 323mm maximum diameter and 8mm maximum wall thickness Make: Ome (Italy) Material: HR, CR, Galv Condition: New Tube Diameter: 168mm – 323mm Wall Thickness: 2mm – 8mm Direction: L-R Speed: 35 meters per minute FORMING MILL Pass N. 1 Driven Forming # 1 Pass N. 2 Driven Forming # 2 Pass N. 3 Driven Forming # 3 Pass N. 4 Driven Forming # 4 Pass N. 5 Driven Forming # 5 Pass N. 6 Driven Forming # 6 Pass N. 7 Side Idle Forming Pass N. 9 Driven Forming # 7 Pass N. 10 Side Idle Forming FIN-PASS SECTION, SINGLE POINT ADJUSTMENT Pass N. 11 Driven Fin Pass # 1 Pass N. 12 Side Idle Fin Pass Pass N. 13 Driven Fin Pass # 2 Pass N. 14 Side Idle Fin Pass Pass N. 15 Driven Fin Pass # 3 Pass N. 16 Driven Fin Pass # 4 SIZING SECTION Pass N. 26 Driven Sizing # 1 Pass N. 27 ...

Tube forming mill OME 320x8mm (A3782) Tube forming mill OME 320x8mm (A3782) for tube production of 323mm maximum diameter and 8mm maximum wall thickness Make: Ome (Italy) Material: HR, CR, Galv Condition: New Tube Diameter: 168mm – 323mm Wall Thickness: 2mm – 8mm Direction: L-R Speed: 35 meters per minute FORMING MILL Pass N. 1 Driven Forming # 1 Pass N. 2 Driven Forming # 2 Pass N. 3 Driven Forming # 3 Pass N. 4 Driven Forming # 4 Pass N. 5 Driven Forming # 5 Pass N. 6 Driven Forming # 6 Pass N. 7 Side Idle Forming Pass N. 9 Driven Forming # 7 Pass N. 10 Side Idle Forming FIN-PASS SECTION, SINGLE POINT ADJUSTMENT Pass N. 11 Driven Fin Pass # 1 Pass N. 12 Side Idle Fin Pass Pass N. 13 Driven Fin Pass # 2 Pass N. 14 Side Idle Fin Pass Pass N. 15 Driven Fin Pass # 3 Pass N. 16 Driven Fin Pass # 4 SIZING SECTION Pass N. 26 Driven Sizing # 1 Pass N. 27 ...

3 slides 3 revolvers with 12 positions each driven main and subspindle 2 C-axis Y axis, workpiece unloading device, high pressure coolant system with paper filter chip conveyor, Control: Fanuc 310i, Country of origin: Italy, Operating hours: 34.000 | 22.900, Number of spindles: 2, Number of linear axis + C axis: 8+2, Max bar diameter [mm]: 65, Spindle speed [rpm]: 5.000, Spindle motor [kW]: 20, Auto bar loader: Iemca Master 880 P/R, Machine weight approx. [kg]: 9.000

saw blade diameter: 350 x 4,0 x 25,4 mm mm cutting diameter: 120 mm weight of the machine ca.: 150 kg speeds: 4400 U/min voltage: 400 V total power requirement: 5,5 kW dimensions of the machine ca.: TBH 1,3 x 1,0 x 1,8 m • Metal cutting saw (with cutting disc 350 x 4.0 x 25.4 mm steel) • Miter cut • Robust commercial and industrial design • Separation area max. 140x90 mm • Cutting disc diameter 350 mm x 4.0 x 25.4 mm • Power machine with (5.5 KW) 5,500 W drive cable, • Includes 3 pieces of cutting discs The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Slitting line Fimi 1500×2.5mm x15t (A3783) Manufacture FIMI ITALY Year 1990 Strip width Min. 200 mm Max. 1500 mm Strip thickness 0.3 – 2.5 mm Coil weight Max. 15 t Coil- Max. 1500 mm Speed Max. 80 m/min Working direction Right  Left The line consists of:  Decoiler Mandrel Cone-Ø 480 – 610 mm Drive / braking Hydraulic motor Lifting table Hydraulic  Coil opener / pinch roll unit Telescopic table Hydraulic No. of pinch rolls 2 Pinch roll-Ø 400 mm Driving motor 25 kw  Slitting head No. of heads 2 Shafts diameter 120 mm Main drive D.C. motor Driving power 92 kW  Scrap baller  Minimum scrap width 5 mm  Maximum number of slits 17 Slits up to 1.0 mm 5 Slits at 2.5 mm  Brakes Pneumatic Press up and dow  Re coiler Capacity 15 t Diameter 508 mm Driving power 120 kw  Term style 4 arms x 15 ton

Used mixer with fixed stainless steel bowl, NN, older model, made in Italy, bowl capacity of up to 200 kg dough, maximum flour capacity of the bowl: 125 kg; maximum power through 1 ALFA MEC 100 motor of 700 rotations per minute, power 1.1 kW, 380V power supply but can also be adapted to 220 V (from the motor); ideal for pizza and bread dough, operation with relatively low noise, 2 speed levels, bowl operation in 2 possible directions, operating time adjustable on the main working direction with the help of a (functional) timer, functional emergency stop, metal frame /chassis cast, extremely stable, stainless steel safety cover, the cover is easy to open and close, the device stops after opening the safety cover (travel limiter), electrical connection: 3N/PE / N / PE 400V / 50 Hz The mixer is produced according to the hygiene and safety regulations in force. The machine complies with Eu ...

CN Centerless grinding machine, ROSSI MONZA 1500 CN, currently being overhauled and fully electrically/electronically retrofitted, Siemens electronics with touchscreen, brushless motor on Z (workpiece diameter) and regulating wheel (adjustable RPM), step motor on grinding wheel dressing increment, auto size compensation after grinding wheel dressing, Grinding wheel 350 mm 610 mm dia, This machine can be inspected in our warehouse in Gussago BS Italy Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc. During centerless plunge grinding, the workpiece is ground in one pass thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece to work which is g ...

Code: 0650 Brand: OMEC - ITALY Model: 750 - CE Standard Automatic dovetailing machine for dovetail joints on drawers and different parts of furniture - CE Standard Technical data: Working width mm 480 Drawer front parts thickness mm 60 Spindle speed rpm 18500 Spindle motor power Hp 1,5 Tip translation motor power Hp 1,5 Overall dimensions mm 1200 x 800 x 1300 h Weight kg 350

Code: 0106 Brand: OMEC - ITALY Model: 650-M Dovetailing machine Technical characteristics: Installed power on board machine Kw 0,75 Max working width mm 420 Center to center of indents mm 25-40-50-80 Overall dimensions: mm 800 x 720 x 1320 h Weight kg 130

Corimpex 2000/1000 welded beam production line Line for the production of welded beam Corimpex 2000/1000 production Italy, year of manufacture 2010. working, complete, decommissioned.

SLEEVE LABELING MACHINE FINPAC type SHM B2 Manufacturer FINPAC S r l Italy Year of production 2007 put into operation 2008 Capacity 6 000 bottles h with 1 0 L bottles and 9 000 on 0 50L Tunnel electric Has been working bottles 0 25 0 33 0 5 0 7 1 0 L Bottle diameter 55 87 mm height 120 240 mm The thickness of foil 45my 50my Spare parts included Dimension 8 x 1 5 m Condition very good Working hours about 2 500 hours [...for more information send your inquiry to the seller.] refno: ET126

Driven Tool, Driven Tool Holder for CNC Lathe BIGLIA fits 100% on a B 501 Y Manufacturer OESTERLE Partner Art.-No. 310 5521 E32 B109 Year of manufacture: approx. 2010 Serial No. 06 - 12 / 0330 Collet holder: ER32 - with a collet 18 mm Weight: 7.5 kg very good condition similar to M.T. ITALY; used

Used PET Blower Siapi 2004 type EASP 20 Italy This is a complete blow molding machine which was not in use for the last 3 years Blower speed 2 500 bph for 2 L bottles The machine has 2 cavities for neck sizes 28 38 mm This Siapi Blower can be tested with a dry run Weight blower 5 000 kg elevator 250 kg positioner 250 kg All the necessary technical documentation for this machine is available Required installed power 120 kW Compressor Tempo Tehnika 350 2004 Specs 1100 rpm 75 kW 42 bar Dehumidifier Bode du 37 type 309 2006 Compressed air tank 1 000 L Compressor cooler MTA rwd 150 2004 Machine cooler Euri chiller gc 2004 The compressor is included in this PET blow molding machine or it can be bought separately Air transport cca 100m Europool Italy For bottles with a neck 28 and 38 mm This blow molding machine complete with compressor and air conveyors is in excellent condition [...for more i ...

Cream separator for warm milk skimming. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. Separation of mixtures of liquids with different densities and simultaneuous elimination of solids (Three Phase Separation). Product: Fresh cows milk (≤ 48h from milking). Process temperature: 48°C - 58°C. Skimming efficiency, expressed in terms of the percentage of fat remaining in skimmed milk is 0,04 - 0,055% with the Röse-Gottlieb method or 0,03 - 0,05% with the Gerber method. Concentration of the cream is 25% to 45%. Feeding pressure (in): ± 1,5 bar. Skimmed milk pressure (out): ± 4 bar. Cream pressure (out): ± 2,5 bar., Milk skimming capacity: 7.000 liter per hour., Standardization capacity: 10.000 liter per hour., The new offered milk skimming separator comes with:, - Steel frame, cladded in stainless steel AISI 304., - Bowl with disc stack, mad ...

Cream separator for warm whey skimming. Self cleaning disc stack centrifuge machine with flat belt drive and automatic discharge. Separation of mixtures of liquids with different densities and simultaneuous elimination of solids (Three Phase Separation). This process separates the fat content in the whey (present is a small percentage, between 0,15% and 0,70%). It is simpler as the milk proces, if there are low curd fines. The whey should be filtered before entering the separator. Process temperature: 35°C - 40°C. Skimming efficiency, measurable in terms of the percentage of residual fat in the whey, is between 0,02% and 0,03%. The percentage may also be lower if the whey is pre-clarified., Whey skimming capacity: 7.500 liter per hour., The new offered whey skimming separator comes with:, - Steel frame, cladded in stainless steel AISI 304., - Bowl with disc stack, made out of special S ...