bock frickenhausen brd used for sale

Scroll vacuum pump Status: used, over-checked, functional Manufacturer: Edwards Type: GVSP 30 Motor: 400V Equipment: Mineraloel nominal suction digesters: 30 m3/h End pressure: <0.01 mbar (abs.) Including: user manual

Scroll-vacuum pump Status: required, verified, functional Manufacturer: Edwards Type: GVSP 30 Engine: 400V Resources: Mineral oil Nominal: 30 m ³/h Discharge pressure: < 0.01 mbar (ABS.) Includes: user manual Oil (mineral oil) delivery: ex works; ready for operation

Used vacuum pump, roller piston pump for the fine vacuum range, suction capacity: 250m3/h Roller piston pump for the fine vacuum range, suction capacity: 250m3/h; Final pressure: depending on the performance of the pre-vacuum pump

- very well used and refurbished rotary vane vacuum pump - oil-sealed two-stage fine vacuum pump - Suction speed: approx. 18 m3/h, final pressure: 5x10E-3 mbar

Bock unit SHGZX7/1860-4 L R448A/449A/404A. Cooling unit BOCK for shock freezer, goes up to minus 40°C Price on request

Make: BOCK Type: HGX4/650-4 Max current consumption: 27A Power: 56.6 m3/h Low pressure: 19 Bar High pressure: 28 Bar Price on request Contact details can be found under Contact

Make: BOCK Type: HAX4/555-4 Max current consumption: 26A Power: 48.2 m3/h Low pressure: 19 Bar High pressure: 28 Bar Price on request Contact details can be found under Contact

double piston compressor system semi-hermetically air-conditioning compressor Compressor Chiller 2 x 18.5 Kw with frequency inverters 2x Semi-hermetic piston compressor Manufacturer: Bock Type: HGX5/830-4 N°: AM18158A014 & AM37155A014 380/420 V; 50 Hz; 3 ph; 1450 rpm. Displacement: 72.20 m3; 19/25 bar Power with cooling conditions and refrigerant R407C: 39.32 kW Power with cooling conditions and refrigerant R404A: 41.27 kW Power with conditions and refrigerant R134a: 31.45 kW 4x Plate heat exchanger Manufacturer: GEA WTT Gmbh Type: WP7M-120 Y.O.M.: 2006 max. Pressure: 30 Bar Temperature: -195/+195 °C Content Page 1: 13.69 Ltr. Content Page 2: 13.92 Ltr. 2x Liquid collector Cat. 2 Manufacturer: FricoMEC Type: RV-300X606 Volume: 35 Ltr. Pressure max:28 bar Temperature: -10/+120 °C 2x Inverter Manufacturer: Fuji Electric Type: FRN18.5F1S-4E 3ph 380/48 ...

1 piece used MOBILE CEMENT SILO (second silo already sold) Brand: NORMANN BOCK Type: WS-22,5 YEAR: 1994 Volume: 22m3 Immediate available location: Wittenberg/Germany price on request offer and all price are net and ex stock, without guarantee and/or guarantee, mistakes and/or false representations reserve, subject prior sale selling in current state / how is it – standing or recumbent,

2 x Bock compressor in very good condition. Please refer to the type debt for data

Stock# U2474 Used vertical, mobile, stainless steel AISI 316L reactor by BOCCARD (France) with a total capacity of 577 l. Reactor has a working volume of 300 l and is designed to operate at pressures ranging from -1 to 0,5 bar and temperatures up to 110 ºC. Internal dimensions: diameter 880 mm, length of straight wall line to inspection manway 800 mm. The heating and cooling jacket made of stainless steel AISI 304 has a capacity of 35 l and is designed to operate at pressures up to 3,5 bar and temperature up to 145 ºC. The jacket is insulated and clad with stainless steel sheet. Reactor has welded dished top equipped with inspection manway, with internal diameter 350 mm. Also in the top head there is a vertically downward installed homogenizing mixer, directly driven by an electric motor with a power of 2.2 kW, 400 V, 960 rpm, 50 Hz. Reactor has welded dished bottom with central dis ...

Refrigerant system Bock -Type: HGX4/310-4 CO2 (x3) -Volume: 27.1 m3/h (x3) -Cooling capacity for R744: 210 kW at -25°C/40°C, 170 kW at -30°C/40°C, 110 kW at -40°C/40°C -Dimensions: 2780 x 1200 x 2170 mm -Items in magazine: 2 -Stock number: Z119 -Condition: Used in very good condition, ready to work

Geared motor, electric motor, three-phase motor -Manufacturer Motor Bockwaldt Type: CB004D -Manufacturer of gearbox: Bockwoldt -Speed: 119 rpm -Power: 0.09 kW -Design: B5 -Shaft diameter: Ø 20 mm -Protection rating: -Number: 1x motor available -Dimensions: 350/170/H180 mm -Weight: 10 kg

Gear motor, electric motor, three-phase motor -Manufacturer Motor Bockwldt type: CB0-56N-4D -Gearbox manufacturer: Bockwoldt -Speed: 30.5 rpm -Power: 0.09 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: -Number: 1x motors available -Price: per piece -Dimensions: 310/160/H175 mm -Weight: 10.7 kg

Geared motor, electric motor, electric geared motor, spur geared motor -Manufacturer: Bockwoldt, spur gear motor -Type: CB9-132M/6D -Speed: 20 rpm -Power: 5.5 kW -Shaft: Ø 65 mmx160 mm -Protection class: IP44 -Height shaft axis: 315 mm -Hole spacing across: 360 mm -Hole spacing lengthwise: 300 mm -Dimensions: 875/450/H500 mm -Weight: 231 kg

Reinforcing steel mesh shears such as guillotine shears, sheet metal shears, sheet metal guillotine shears, hydraulic shears -Manufacturer: Maschinenfabrik Bock, hydraulic guillotine shear, reinforcing steel mesh shear type 2550 -Cutting width: 2500 mm -Max. cutting capacity: Ø 12 mm double at 100 mm pitch -Motor: Dietz 7.5 kW -Space requirement: 3020/2000/H1320 mm -Transport dimensions: 3130/1080/1465 mm -Weight: 2000 kg

Full frame saw Balfour boy with Chuck wagon Wood diameter of exceeding 60 cm Engine 55 kW L x W x H: 230 x 200 x 400 cm Weight approx. 8 to Built in 1958 Disassembly by buyer The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Gear motor, electric motor, electric gear motor -Speed: 24/48 rpm -Power: 0.15/0.2 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 54 -Dimensions: 335/170/H180 mm -Weight: 12.1 kg

Gear motor, electric motor, three-phase motor -Speeds: 122 rpm -Power: 0.12 kW -Construction: B3 -Diameter shaft: Ø 16 mm -Protection class: IP 54 -Price: per piece -Number: 2x available -Dimensions: 325/170/H150 mm -Weight: 9 kg

geared motor, electric motor -Speed: 61/122 rpm -Power: 0.11/0.15 kW -Design: B3 -Shaft diameter: Ø 16 mm -Protection class: IP 54 -Number: 1x geared motor available -Dimensions: 330/130/H190 mm -Weight: 10.1 kg

Gear motor, electric motor, electric gear motor -Speed: 7.6 rpm -Power: 0.25 kW -Shaft diameter: Ø 30 mm -5x design: B5 -2x design: B14 -Protection class: IP 54 -Price: per piece -Number: 7x available -Dimensions: 480/200/H230 mm -Weight: 26 kg

Geared motor, electric motor, electric geared motor -Speed: 45/90 rpm -Power: 0.45/0.6 kW -Design: B3 -Shaft diameter: 25 mm -Protection class: IP 33 Quantity: 1 piece available -Dimensions: 415/200/210 mm -Weight: 20.3 kg

Gear motor, electric motor, three-phase motor -Speeds: 462 rpm -Power: 0.12 kW -Construction: B5 -Diameter shaft: Ø 20 mm -Protection class: IP 54 -Dimensions: 335/175/H180 mm -Weight: 9.5 kg

Gear motor, electric motor, electric gear motor -Speed: 9.1 rpm -Power: 0.25 kW -Shaft diameter: Ø 30 mm -Construction: B5 -Protection class: IP 54 -Dimensions: 485/205/H230 mm -Weight: 28 kg

Geared motor, electric motor, electric geared motor -Speed: 116 rpm -Power: 0.25 kW -Diameter: Ø 16 mm -Design: B5 -Protection class: IP 54 -Number: 5x motors available Price: per piece -Dimensions: 340/180/H145 mm -Weight: 9.8 kg

Gear motor, electric motor, electric gear motor -Speed: 45/90 rpm -Power: 0.16/0.3 kW -Diameter shaft: Ø 20 mm -Construction: B3 -IP protection -Dimensions: 360/160/H175 mm -Weight: 14 kg

Gear motor, electric motor -Speed: 76 rpm -Power: 1.1 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 55 -Number: 2x motors available -Price: per piece -Dimensions: 425/220/H210 mm -Weight: 26 kg

Gear motor, electric motor, electric gear motor -Speed: 24.8 rpm -Power: 0.37 kW -Diameter hollow shaft: Ø 30 mm -Construction: hollow shaft -Protection class: IP 55 -Brake -Dimensions: 340/290/H210 mm -Weight: 21 kg

Gear motor, electric motor, electric gear motor -Speed: 132 rpm -Power: 0.37 kW -Diameter shaft: Ø 25 mm -Construction: B3 -Protection class: IP 33 -Dimensions: 455/230/H220 mm -Weight: 30 kg

Gear motor, electric motor -Speed: 46/92 rpm -Power: 0.7/1.1 kW -Construction: B3 -Shaft diameter: Ø 30 mm -Protection class: IP 33 -Weight: 31 kg

Gear motor, electric motor -Speed: 295 rpm -Power: 0.75 kW -Design: B5 -Diameter shaft: Ø 25 mm -Protection class: -Price per piece -Quantity: 2x available -Weight: 22kg

Gear motor, electric motor, three-phase motor, right-angle gear motor -Speed: 16.5 rpm -Power: 0.75 kW -Construction: B3 -Diameter shaft: Ø 40 mm -Protection class: IP 54 -Dimensions: -Weight piece: 47 kg

Gear motor, electric motor, electric gear motor -Speed: 45/90 rpm -Power: 0.35/0.5 kW -Diameter shaft: Ø 25 mm -Construction: B3 -Protection class: IP 33 -Number: 3x motors available -Price: per piece -Dimensions: -Weight: 20.4 kg

Machine Reamers, Reamer, Reaming Tool, Passknife Cutting Set -Machine reamer: Reamer with holder -Diameter: Ø 59 mm -Holder: DIN 219 MK5 -Total dimensions: Ø 59 x 442 mm -Weight: 5.6kg

Gear motor, electric motor -Speed: 626 rpm -Power: 2.2 kW -Construction: B5 -Diameter shaft: 20 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 460/250/H210 mm -Weight: 31 kg

Ø max working wheel: 508, Ø min. working wheel: 380, Ø inside working wheel: 254 (305), Working wheel width: 205, Ø max. drive grinding wheel: 305, Ø min. drive grinding wheel: 230, Ø inside grinding wheel: 152.4, width of feed wheel: 205, Cutting speed: 30-45-60 m/s, R.p.m. of the driving wheel: 0-300, Diamond speed: 300, working wheel motor: 15 Kw (18Kw), Driving wheel motor: 10.4 Nm, Dimensions WxLxDxH: 2250x3380x2385, Weight: 9000Kg, CNC Brand: SIEMENS, CNC Model: 840 D, Number of CNC axes: 11

Ø min/max to be rectified: 3 - 300 mm, Dimensions of the work wheel: Ø610xØ304.8x508 mm, Dimensions of the drive wheel: Ø355xØ152.4x508 mm, Weight: 17000 kg, Power: 100 kW

GENERAL CHARACTERISTICS:, Grinding Wheel Dimensions: Ø610xØ304,8x300 mm, Regulating Wheel Dimensions: Ø355xØ152,4x300 mm

GENERAL CHARACTERISTICS:, Grinding Wheel Dimensions: Ø610xØ304,8x508 mm, Regulating Wheel Dimensions: Ø355xØ152,4x508 mm, Ø min/max to be rectified: 3 - 300 mm, Dimensions of the work wheel: Ø610xØ304.8x508 mm, Dimensions of the drive wheel: Ø355xØ152.4x508 mm, Weight: 17000 kg, Power: 100 kW

GENERAL CHARACTERISTICS:, Grinding Wheel Dimensions: Ø610xØ304,8x300 mm, Regulating Wheel Dimensions: Ø355xØ152,4x300 mm

MARPOS automatic wheel balancer, tapes and gantry for loading and unloading | automatic wheel balancer, gantry and band for loading and unloading, smoke extractor, Ø grinding wheel dimensions (od x id x width): 508 x 304.8 x 254 mm, Regulating wheel width: 254 mm, Diamond dressing speed: Ø508 x 254 mm, Lubrication (auto / manual): automatic centralized / automatic lubrication, Cnc brand: FANUC, Cnc model: Series 18i - T, Cnc axes nº: 8, Regulating wheel dimensions (od x id x width): 305 x 190.5 x 254 mm, Grinding wheel width: 254 mm, Total power: 25 kW, Voltage: 220/380 v, Long: 2150 mm, Width: 2200 mm, High: 3400 mm, Weight: 8000 kg, Accessories included: MARPOS automatic wheel balancer, tapes and gantry for loading and unloading | automatic wheel

Gear motor, electric motor, electric gear motor -Electric motor: for gearbox -for gear motor type: CB59-80K/4DBRF -Speed: 1380 rpm -Power: 0.55 kW -Worm shaft: Ø 20 mm -Construction: B5 -Protection class: IP 54 -Brake -Price: per piece -Number: 1x available -Dimensions: 345/210/H160 mm -Weight: 13 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 223 rpm -Power: 2.2 kW -Construction: B5 -Diameter shaft: O 30 mm -Protection class: IP 33 -Price per piece -Quantity: 2 pieces available -Dimensions: 600/270 / H250 mm -Weight: 41 kgpc.

Geared motor, electric motor, three-phase motor, electric geared motor -Speed: 108 rpm -Power: 0.75 kW -Design: B3 -Shaft diameter: Ø 20 mm -Protection class: IP 54 -Brake -Number: 1x motor available Price: per piece -Dimensions: 425/210/H180 mm -Weight: 20 kg

Grinding wheel diameter x W: 200 x 32 mm Grinding wheel bore: 32 mm Grinding wheel grain: K 36 / K 80 RPM: 2850 RPM S1 engine power output 100%: 0.90 kW Motor power S6 40%: 1.25 kW Voltage: 400 V Width: 510 mm Depth: 270 mm Height: 310 mm Weight: approx. 25 kg Scope of delivery: Roughing wheel K 36 Simple disk K 80 Spark cover on both sides Workpiece support Base extra charge available. Special price including delivery to 1 address Germany (Mainland).

Description: heavy double grinding buck (Leipzig Iron and Steel Works) with chip container Technical data Grinding wheel permeser 400 mm Operating voltage 380 volts Drive power 4 KW Weight approx. 340 kg Dimensions (LxWxH) 1100 x 1150 x 1120 mm

Doppelschleifbock, water cooled-Schleifscheibe max Ã? 350 x 50 mm (neuwerig) speed 1400 RPM engine power 1.8 KW 380 Volt L 1050 B 750 H 1250 mm - 79. weight 300 kg