bock frickenhausen brd used for sale

Make: BOCK Type: HGX4/650-4 Max current consumption: 27A Power: 56.6 m3/h Low pressure: 19 Bar High pressure: 28 Bar Price on request Contact details can be found under Contact

Make: BOCK Type: HAX4/555-4 Max current consumption: 26A Power: 48.2 m3/h Low pressure: 19 Bar High pressure: 28 Bar Price on request Contact details can be found under Contact

double piston compressor system semi-hermetically air-conditioning compressor Compressor Chiller 2 x 18.5 Kw with frequency inverters 2x Semi-hermetic piston compressor Manufacturer: Bock Type: HGX5/830-4 N°: AM18158A014 & AM37155A014 380/420 V; 50 Hz; 3 ph; 1450 rpm. Displacement: 72.20 m3; 19/25 bar Power with cooling conditions and refrigerant R407C: 39.32 kW Power with cooling conditions and refrigerant R404A: 41.27 kW Power with conditions and refrigerant R134a: 31.45 kW 4x Plate heat exchanger Manufacturer: GEA WTT Gmbh Type: WP7M-120 Y.O.M.: 2006 max. Pressure: 30 Bar Temperature: -195/+195 °C Content Page 1: 13.69 Ltr. Content Page 2: 13.92 Ltr. 2x Liquid collector Cat. 2 Manufacturer: FricoMEC Type: RV-300X606 Volume: 35 Ltr. Pressure max:28 bar Temperature: -10/+120 °C 2x Inverter Manufacturer: Fuji Electric Type: FRN18.5F1S-4E 3ph 380/48 ...

Bock unit SHGZX7/1860-4 L R448A/449A/404A. Cooling unit BOCK for shock freezer, goes up to minus 40°C Price on request

Condensing unit: SHGX56e/1155-4 L Serial-No.: 170151 Refrigerant type / GWP R449A/1397 Filling quantity / CO2 equivalent: see system type plate Oil type/quantity: SE55 / 3,3l Working voltage: 400V/3Ph/50H Ab. Overpressure suction side PS: 19 bar Ab. Overpressure pressure side PS: 28 bar Ab. Temperature suction side TS: -40/+40°C Ab. Temperature pressure side TS: 0/+120°C Production No.: B06884.01/79183 Year of construction: 11/2019 Contains fluorinated greenhouse gases covered by the Kyoto Protocol Type: HGX56e/1155-4 Product code: BB47202C057 imax: 46.9A Y: 149A YY: 246A Pmax: ND(LP) / HD(HP) = 19/28 bar 380-420V Y/YY - 3 - 50HZ n: 1450 min V: 100,4 m³/h 440-480V Y/YY - 3 - 60HZ n: 1740min V: 120,5 m³/h IP66, oil: SE55

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 108 rpm -Power: 0.75 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 54 -Brake -Number: 2x motors available -Price: per piece -Dimensions: 425/210/H180 mm -Weight: 20 kg

Machine Reamers, Reamer, Reaming Tool, Passknife Cutting Set -Machine reamer: Reamer with holder -Diameter: Ø 59 mm -Holder: DIN 219 MK5 -Total dimensions: Ø 59 x 442 mm -Weight: 5.6kg

Gear motor, electric motor, electric gear motor -Electric motor: for gearbox -for gear motor type: CB59-80K/4DBRF -Speed: 1380 rpm -Power: 0.55 kW -Worm shaft: Ø 20 mm -Construction: B5 -Protection class: IP 54 -Brake -Price: per piece -Number: 1x available -Dimensions: 345/210/H160 mm -Weight: 13 kg

Gear motor, electric motor, electric gear motor -Speed: 24/48 rpm -Power: 0.15/0.2 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 54 -Dimensions: 335/170/H180 mm -Weight: 12.1 kg

Gear motor, electric motor, three-phase motor -Speeds: 122 rpm -Power: 0.12 kW -Construction: B3 -Diameter shaft: Ø 16 mm -Protection class: IP 54 -Price: per piece -Number: 2x available -Dimensions: 325/170/H150 mm -Weight: 9 kg

Gear motor, electric motor -Speed: 61/122 rpm -Power: 0.11/0.15 kW -Construction: B3 -Diameter shaft: Ø 16 mm -Protection class: IP 54 -Number: 1x geared motors available -Price: per piece -Dimensions: 330/130/H190 mm -Weight: 10.1 kg

Gear motor, electric motor, electric gear motor -Speed: 7.6 rpm -Power: 0.25 kW -Shaft diameter: Ø 30 mm -6x design: B5 -2x design: B14 -Protection class: IP 54 -Price: per piece -Number: 8x available -Dimensions: 480/200/H230 mm -Weight: 26 kg

Gear motor, electric motor, electric gear motor -Speed: 45/90 rpm -Power: 0.45/0.6 kW -Construction: B3 -Diameter shaft: 25 mm -Protection class: IP 33 -Number: 1x motors available -Price: per piece -Dimensions: 415/200/210 mm -Weight: 20.3 kg

Gear motor, electric motor, three-phase motor -Manufacturer Motor Bockwldt type: CB004D -Gear manufacturer: Bockwoldt -Speed: 119 rpm -Power: 0.09 kW -Construction: B5 -Diameter shaft: Ø 20 mm -Protection class: -Number: 1x motors available -Price: per piece -Dimensions: 350/170/H180 mm -Weight: 10 kg

Gear motor, electric motor, three-phase motor -Manufacturer Motor Bockwldt type: CB0-56N-4D -Gearbox manufacturer: Bockwoldt -Speed: 30.5 rpm -Power: 0.09 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: -Number: 3x motors available -Price: per piece -Dimensions: 310/160/H175 mm -Weight: 10.7 kg

Gear motor, electric motor -Speed: 164 rpm -Power: 0.75 kW -Construction: B5 -Diameter shaft: Ø 22 mm -Protection class: IP 54 -Number: 1x available -Price: per piece -Dimensions: 380/200/H185 mm -Weight: 15.5 kg

Gear motor, electric motor, three-phase motor -Speeds: 462 rpm -Power: 0.12 kW -Construction: B5 -Diameter shaft: Ø 20 mm -Protection class: IP 54 -Dimensions: 335/175/H180 mm -Weight: 9.5 kg

Gear motor, electric motor, electric gear motor -Speed: 116 rpm -Power: 0.25 kW -Diameter: Ø 16 mm -Construction: B5 -Protection class: IP 54 -Number: 7x motors available -Price: per piece -Dimensions: 340/180/H145 mm -Weight: 9.8 kg

Gear motor, electric motor, electric gear motor -Speed: 9.1 rpm -Power: 0.25 kW -Shaft diameter: Ø 30 mm -Construction: B5 -Protection class: IP 54 -Dimensions: 485/205/H230 mm -Weight: 28 kg

Gear motor, electric motor -Speed: 626 rpm -Power: 2.2 kW -Construction: B5 -Diameter shaft: 20 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 460/250/H210 mm -Weight: 31 kg

Gear motor, electric motor -Speed: 76 rpm -Power: 1.1 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 55 -Number: 2x motors available -Price: per piece -Dimensions: 425/220/H210 mm -Weight: 26 kg

Gear motor, electric motor, electric gear motor -Speed: 45/90 rpm -Power: 0.16/0.3 kW -Diameter shaft: Ø 20 mm -Construction: B3 -IP protection -Dimensions: 360/160/H175 mm -Weight: 14 kg

Gear motor, electric motor, electric gear motor -Speed: 24.8 rpm -Power: 0.37 kW -Diameter hollow shaft: Ø 30 mm -Construction: hollow shaft -Protection class: IP 55 -Brake -Dimensions: 340/290/H210 mm -Weight: 21 kg

Gear motor, electric motor, electric gear motor -Speed: 26/52.4 rpm -Power: 0.3/0.44 kW -Diameter shaft: Ø 25 mm -Construction: B5 -Protection class: IP 33 -Number: 1x motors available -Price: per piece -Dimensions: 395/210/H165 mm -Weight: 16 kg

Gear motor, electric motor, electric gear motor -Speed: 132 rpm -Power: 0.37 kW -Diameter shaft: Ø 25 mm -Construction: B3 -Protection class: IP 33 -Dimensions: 455/230/H220 mm -Weight: 30 kg

Gear motor, electric motor -Speed: 46/92 rpm -Power: 0.7/1.1 kW -Construction: B3 -Shaft diameter: Ø 30 mm -Protection class: IP 33 -Weight: 31 kg

Gear motor, electric motor -Speed: 295 rpm -Power: 0.75 kW -Construction: hollow shaft angle B5 -Diameter shaft: Ø 25 mm -Protection class: -Price: per piece -Number: 2x available -Weight: 22 kg

Gear motor, electric motor, three-phase motor, right-angle gear motor -Speed: 16.5 rpm -Power: 0.75 kW -Construction: B3 -Diameter shaft: Ø 40 mm -Protection class: IP 54 -Dimensions: -Weight piece: 47 kg

Gear motor, electric motor, electric gear motor -Speed: 45/90 rpm -Power: 0.35/0.5 kW -Diameter shaft: Ø 25 mm -Construction: B3 -Protection class: IP 33 -Number: 3x motors available -Price: per piece -Dimensions: -Weight: 20.4 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 223 rpm -Power: 2.2 kW -Construction: B5 -Diameter shaft: O 30 mm -Protection class: IP 33 -Price per piece -Quantity: 2 pieces available -Dimensions: 600/270 / H250 mm -Weight: 41 kg

2 pieces used MOBILE CEMENT SILO Brand: NORMANN BOCK Type: WS-22,5 YEAR: 1994 Volume: 22m3 Immediate available location: Wittenberg/Germany price on request offer and all price are net and ex stock, without guarantee and/or guarantee, mistakes and/or false representations reserve, subject prior sale selling in current state / how is it – standing or recumbent,

Usable length: approx. 2,300 mm, usable width: approx. 105 mm, with built-in drip tray, Hinge plates made of plastic, side guides: height: approx. 80 mm, adjustable in the Width from 50 - 250 mm, drive not adjustable, manual or automatic operation possible,, can promote in 2 directions.

Capacity: 23m³, max. filling weight: 32t, discharge height under flap: 1700mm, diameter: 2500mm, height: 7550mm, with hopper 50°, with shaker support and rain deflector, discharge flap NW 250, lateral pipe socket NW 350, dome cover NW 500, filling pipe 2.5 inch and vent pipe 4 inch, four holes in the base frame for fastening the silo to the ground, thimbles (crane eyes) for empty transfer and filling level inspection window above the hopper, made of one piece without welded seam.

Grinding wheel diameter x W: 200 x 32 mm Grinding wheel bore: 32 mm Grinding wheel grain: K 36 / K 80 RPM: 2850 RPM S1 engine power output 100%: 0.90 kW Motor power S6 40%: 1.25 kW Voltage: 400 V Width: 510 mm Depth: 270 mm Height: 310 mm Weight: approx. 25 kg Scope of delivery: Roughing wheel K 36 Simple disk K 80 Spark cover on both sides Workpiece support Base extra charge available. Special price including delivery to 1 address Germany (Mainland).

Description: heavy double grinding buck (Leipzig Iron and Steel Works) with chip container Technical data Grinding wheel permeser 400 mm Operating voltage 380 volts Drive power 4 KW Weight approx. 340 kg Dimensions (LxWxH) 1100 x 1150 x 1120 mm

Doppelschleifbock, water cooled-Schleifscheibe max Ã? 350 x 50 mm (neuwerig) speed 1400 RPM engine power 1.8 KW 380 Volt L 1050 B 750 H 1250 mm - 79. weight 300 kg

DATA ON THE MACHINE Machine type: Grinding bracket / double grinding bracket Manufacturer: METABO Model: 7230 Condition: very good (used) Price 450 â?¬ FP net plus 19% VAT Location Warstein , Germany Reference M-MET-1119 Description We offer you a grinding buck from the manufacturer METABO. Grinding wheel diameter max. 300 Weight ink. Base approx. 250kg Storage as new. Our offer is aimed at persons who are covered within the meaning of the Trade Code in accordance with Section 14 GewO. The offer is subject to change, intermediate sale reserved. Please provide your full contact details in order to receive an offer with our Terms and Conditions of Payment. Mistakes in the descriptions and offers are reserved!

Double grinding buck Manufacturer Greif Type D20-1-1 Kw 0.55 New grinding wheels Neulack Very good and quiet run Grinding machine Abrasive Grinding Buck Double Grinding Machine Double Grinding Wheel Machine Special price

Specifications: - Grinding wheel diameter approx. 500 mm - Grinding wheel width approx. 50 mm - Grinding wheel bore approx. 127 mm - Disc speed 950 rpm - Drive 400 V / 3.3 kW - Working height approx. 800 mm - Working depth / protective depth adjustable - Connections for suction pipe 100 mm - Space requirement approx. W 1250 x H 1150 x D 650 mm - Weight approx. 350 kg

Double grinding machine TS 200 SD P with SUCTION, machine stand, emergency stop push button and brake smooth-running, maintenance-free motor Protective covers closed at the sides Stable, adjustable workpiece supports High level of safety comfort thanks to adjustable spark deflectors suitable for grinding, deburring and sharpening tools of all kinds, metal profiles, etc. Motor Circuit Breakers and Undervoltage Trippers Double-sided spark/eye protection connection cable with CEE plug 16 A 1 grinding wheel each coarse and fine 12 months warranty for single-shift operation - Suction nozzle Ø (mm): 42 - Grinding wheel (mm): 200 x 32 x 32 - Machine dimension without packaging (mm): 250 x 470 230 - Speed (1/min): 2550 - Three-phase motor 400 V (kW)1: Operating mode S2-30 min (short-term operation) - Weight (kg): 60 Shipping time:immediately, from stock

Specifications: - Grinding wheel diameter approx. 200 mm - Grinding wheel width approx. 25 mm - Grinding wheel bore approx. 51 mm - Disc speed 1450 rpm - Drive 400 V / 0.7 kW - Space requirement approx. W 600 x H 400 x D 350 mm - Weight approx. 30 kg - Console for wall mounting

offer 21322 Specifications: - Grinding wheel diameter approx. 300 mm - Grinding wheel width approx. 40 mm - Grinding wheel bore approx. 70 mm - Disc speed 1450 rpm - Working height 1100 mm -Mot. Dust extraction - Drive 400 V / 1.1 kW - Space requirement approx. W 800 x H 1250 x D 600 mm - Weight approx. 150 kg

offer 21055 Double polishing block Specifications: - Grinding wheel diameter approx. 300 mm - Grinding wheel width approx. 40 mm - Grinding wheel bore approx. 70 mm - Disc speed 1450 rpm - Working height 1100 mm -Mot. Dust extraction - Drive 400 V / 1.1 kW - Space requirement approx. W 800 x H 1250 x D 600 mm - Weight approx. 150 kg

offer 22431 Specifications: - Grinding wheel diameter approx. 300 mm - Grinding wheel width approx. 40 mm - Grinding wheel bore approx. 76 mm - Disc speed 2900 rpm - Working height 1100 mm - Original machine stand - Drive 400 V / 1.8 kW - Space requirement approx. W 800 x H 1150 x D 450 mm - Weight approx. 150 kg

Specifications: - Grinding wheel diameter approx. 200 mm - Grinding wheel width approx. 32 mm - Grinding wheel bore approx. 32 mm - Disc speed approx. 2500 rpm - Drive 400 V / 1.8 kW - Working height approx. 980 mm - Machine stand with motorized extraction MA 600 - Drive extraction 400 V / 1.5 kW - Space requirement approx. W 550 x H 1100 x D 650 mm - Weight approx. 80 kg

Rema DS15/300W Double grinding machines for wet sanding Motor: 400 V / 1.8 kW / 1,450 rpm Wheel diameter: 300 mm cup grinding wheels with recess Stand design with large water collection, sludge separator, coolant pump, flexible coolant hoses Grinding motor and coolant pump can be switched separately Accessories: - Eye shields -Coolant pump - Machine light - Dresser The machine is in very good condition and is fully functional.

Speed: 700/1400 rpm. Equipped with: Various polishing wheels Engine power: 3.5 PK Country of origin: Italy Machine LxWxH: Machine weight: 150 kg

Specifications: - Grinding wheel diameter approx. 175 mm - Grinding wheel width approx. 25 mm - Grinding wheel bore approx. 51 mm - Right support table can be tilted sideways - Disc speed 2900 rpm - Drive 400 V / 0.25 kW - Working height approx. 950 mm -Mot. Dust extraction - Space requirement approx. W 600 x H 1200 x D 600 mm - Weight approx. 120 kg

Specifications: - Grinding wheel diameter approx. 200 mm - Grinding wheel width approx. 32 mm - Grinding wheel bore approx. 51 mm - Disc speed approx. 1450 rpm - Drive 400 V / 0.9 kW - Working height approx. 1100 mm - Emergency – Off button - Base cabinet with 2 doors - Space requirement approx. W 800 x H 1150 x D 350 mm - Weight approx. 150 kg - Year of construction approx. 1995

Double grinding machine TS 300 SD P with SUCTION, machine stand, emergency stop push button and brake smooth-running, maintenance-free motor Protective covers closed at the sides Stable, adjustable workpiece supports High level of safety comfort thanks to adjustable spark deflectors suitable for grinding, deburring and sharpening tools of all kinds, metal profiles, etc. Motor Circuit Breakers and Undervoltage Trippers Double-sided spark/eye protection connection cable with CEE plug 16 A 1 grinding wheel each coarse and fine 12 months warranty for single-shift operation - Grinding wheel (mm): 300 x 40 x 51 - Machine dimensions without packaging (mm): 540 x 530 x 1,180 mm 230 - Speed (1/min): 1250 - Three-phase motor 400 V / 2.2 kW: operating mode S2-30 min (short-term operation) - Extraction motor 0.55 kW, suction power 350m³/h - Weight (kg): 90 Shipping time:immedia ...