bob cat used for sale

Bobst Media 100 II A2 year 1999 HHS gluing system 6 guns cold glue 1 gun hot glue Disc Gluing

Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, Perm.Magn-Mot, Perm Magnet Motors, Servo Motor -Manufacturer: Bobolowski, servo motor -Type: HTBL-S 070/035-3SPE-2-1111-C -Voltage: 700V -Shaft: Ø 14 x 25 mm -Techn. Data: see photo type plate -Number: 2x servomotors available -Price per piece -Dimensions: 140/70/H120 mm -Weight: 2.1 kg/pc.

Reference ID PP-58237 Category Flatbed Die Cutter Manufacturer Bobst Model SP 142-ER Year Built 1985 Color - Impression - Working Hours 75690 Speed 6000 sheets/h Max. size 142 x 102 cm Min. size 70 x 50 cm Condition Good Location Europe Availability Immediately Machine Description Double Stripping working hours 75690

Bobst SP1600 E, Year 1987, Max.Size: 1115 x 1600 mm, Min.Size: 600 x 850 mm, Max. cutting force: 750 T, Centerline, Non stop, Chain and all grippers as new.

Bobst Sprintera 106 PER - with PowerRegister, Jahr 2003, Paper_ Cardboard_ Corrugated, From 70 g/m2 250 - 2000 g/m2, E flute and B flute up to 4 mm, Sheet size max. 1060 x 760 mm min. 400 x 350 mm, Die Cutting with gripper max. 1060 x 745 mm, Embossing max. 1060 x 740 mm, Gripper size from: 9 - 17 mm, The cutting knives height 23.8 mm, Embossing height 6.35 / 7 mm, Pressure 2.5 MN max., Speed (sh/h.) max. 12,000, Pallet height max. 1600 mm., Inclusive : - Power Register -, Height 60cm - Quicklock System, Centerline

Bobst SP 104 ER,, Year 1996, Max.Size: 1040x740 mm, Min.Size: 400x350 mm, Max.Speed: 8000 Sh/h, Max.Cutting force: 250T, Max. Thickness Corrugated board: 4.0 mm, Max.Paper gr/m: 2000 gr., Centerline, Quick-Lock system, Micrometer adjustment on the counterplate, Safety clamps for chain blocking, Non-Stop conveyer + Feeder, Chase changer

Bobst SP 102 CER, Max.Size: 720x1020 mm, Min.Size: 350x400 mm, Year 1988, Max.Speed: 8000 Sh/h, Max.Cutting force: 250 T, Centerline, Quicklock system, Non-Stop in Delivery

Bobst SP 142ER,, Year 1985, Max.Size: 1420x1020 mm, Min.Size: 700x500 mm, Max.Speed: 6000 Sh/h, Max.Cutting Force: 600 T, Centerline, Quicklock system, With tool separation station, Between-bow inserter and pre-taping device,, Working platform,, - 1 x preparation table for external tool preparation, - 4 x frames for breakout molds, - 4 x closing frames for punching tool, - 4 x Rescue vehicle

hoogte vijfde wiel, Max.Size: 800x1120mm, Min.Size: 380x450 mm, Max.Speed: 6500 Sh/h, Jahr 1974, Centerline, Quicklock system, in production

Bobst SP 102 CER, Max. size: 720x1020 mm, Minimum size: 350x400 mm, Year 1988, Max.Speed: 8000 Sh/h, Max. cutting force: 250 T, Centerline, Quicklock system, Non-Stop in Delivery

Bobst SP 142 ER, Year 1987, Max. size: 1020x1420 mm, Min. size: 700x520 mm, Max. speed: 6000 Sh/h, Max. cutting force: 600 T, Centerline, micrometer adjustment, in production

Bobst SPO 1575 + 2 Color Flexo Printing Unit, Jahr 1994, Max.Size: 1575x1075 mm, Min.Size: 600x400 mm, Max.Speed: 4500 Sh/h, Max.Cutting force: 350 t, Flexo Printing Unit year 1974

Bobst SPO 160 ER - Matic, Year 2002, Max. Size: 1620x1120 mm, - Prefeeder Bobst C-160E Matic, - Transfer and aligning section with side and front alignment, - Die cutting section with center line, - Stripping station with quick lock system, - Blanking station with quick lock system, - Chase Loader for the preparation of the cutting form outside the machine, - integrated palletizer with batch control unit, - Computer with Matic Setup and Control system

Qty. 1 Second-hand Automatic Die Cutter Mfc.: Bobst Type: 102 E II Automatic Die Cutter Built: 1996 Speed: 7,500 Sheet per hour Max. Sheet Size 720 x 1020 mm Raised: 30 cm Steel Plate Feeder Lefthand Pull Sidelay Active Front Lays CUBE Touch Screen Computer Operation Chase with 1.0 mm Cutting Plate Centerline Micrometric Adjustment Quick Lock Chase Double Action Stripper Quick Lock Stripping Frames Spare Stripping Frames Selection Bars And Pins Non stop Delivery New Chains, Clutch & Brake 3 Years ago, only used as a backup machine since then

Format range: max. 680 mm, min. 126 mm Equipment: Longitudinal seam, folding bottom, double edge, electronic top gluing unit HHS X-pect, 4 channel with 2 application heads, disc undergluer on the left, Bobst CUBE control, vibrator, cleaning brushes in the feeder, primary crusher on the right and left, kicker, counter, digital position indicators, folding floor module A2, pneumatic, intermittent press belt. Overhaul in 2026: cleaned, checked, painted, new press belts as well as feeder and transport belts.

Bobst SP 142 E, Year 1992, Max.Size: 1020x1420 mm, Min.Size: 500x700 mm, Max.Speed: 6500 Sh/h, Max.Cutting force: 600 T, Centerline, Quicklocksystem

Powerful spray cleaning for a wide range of parts Also for heavy workpieces From lightly oiled to heavily soiled Further data on request

Used Used Bottles Devider 9.000 bph: Year: 2011 Condition: As Is Used Bottles Devider 9.000 bph: Year: 2011 Speed: 9,000 BPH 4 adjustable lanes Minimum and maximum diameters of bottles: Minimum ?: 61 mm Maximum ?: 88.4 mm Safety protections Code: DD 12 More details: https://bottlingscout.com

Format range: Boxes, folded flat: max. 400 mm, min. 50 mm Length of the boxes: max. 500 mm, min. 100 mm Equipment: Standard, left-hand delivery, own drive in the rotary module, vibrator, own drive in the delivery, infinitely adjustable via potentiometer, standalone solution via speedometer, processable materials: solid board, E-flute, carton types: Ordinary folding boxes 4+6 dot boxes, with or without lids. Overhaul 2026: cleaned, checked, painted, new belts and belts. Machine can be viewed by appointment while running.

Size: 1420 x 1020 mm Equipments: Max. speed 6,000/h Gripper 18–22 mm Max. sheet 1420×1020 mm Min. sheet 700×500 mm Die-cut force 600 t Stripping station Intermediate sheet feeder Pre-pile device Working platform Cardboard 100–1000 g/qm2 & corrugated Tool prep table 6× chases · 6× stripping frames · 6× setup trolleys

Impressions=0 m, Condition= Very Good , Availability= 2026-07-07, 3 point gluing Side gluing Suitable for straight line boxes Bottom and top glue application discs available With standard equipment

Impressions=0 m, Condition= Very Good , Availability= 2026-07-07, Hot Foil Stamping Machine Carton board min: 80 gr Carton board max: 800 gr Corrugated board max: 2 mm Sheet size min: 29,5x35 cm Sheet size max: 78x108 cm Speed max: 4000 s/h Stamping speed max: 4000 s/h Stamping & embossing size max: 78x108 (Longitudinal) Stamping & embossing size max. 78x108 (Transversal) Die cutting size max: 78x108 Temperature max 180 ºC Foll length: 1000 meter Longitudinal: Web width advance shafts: 72 cm Transverse: Web width advance shafts 102 cm Max. pile height (feeder unit): 120 cm Max. pile height (delivery unit): 120 cm It is in very good condition Avaliable immediately

Impressions=0 m, Condition= , Availability= 2026-07-07, Full revised in 2023 3 point glueing NORDSON” Cold Glueing System "ERO" Glueing System 2023 (optional) KQ” Glueing System 2023 (optional) With standart equipments Regularly maintained by Bobst It is completely overhauled in 2020 It is completely cleaned and painted It is in perfect condition Available immediately

Impressions=0 m, Condition= Good , Availability= 2026-07-07, With chases and frames In a good condition Can be seen in our warehouse in Istanbul Available on October 2021

Format range: max. 1100 mm, min. 126 mm. Equipment: Longitudinal seam, folding bottom, double edge, 4-point gluing, cutting alignment module according to the feeder, electronic ERO top gluer with 4 application heads, Disc subglue unit on the left, electronic overhaul folding with servos, vibrator with tooth gauge on the feeder, additional central transport in the primary crusher, primary crusher right and left, kicker, counter, additional central transport in folding, long, pneumatic, intermittent press belt, cleaned, tested, new feeder and transport belts. Machine can be viewed by appointment while running.

Bobst Domino 145 Matic, • Construction year: 1990, • longitudinal stitch, • with electronic glue system hhs4, • 4/6 point gluing, • max.size: 1100 x 1450mm, • Cold-glue electronics glue system hhs with 6 nozzles, • Hot-melt electronics glue system hhs with 4 nozzles, + Alignment station, + Ring inserter, + Pressband, • Material : Corrugated cardboard and solid cardboard, • Year of construction: 1990, • max.size: 1100 x 1450mm

Bobst Novacut 106E, Year: 2012, Max. size: 740x1060mm, Max. speed: 8000 rpm, + centerline, + quick-lock system, 22,000 running hours, very good condition, Year: 2012, Max. size: 740x1060mm, Max. speed: 8000 sh/h

Over 80 years experience in maintenance., Expert that jointly reflects on the ideal solution for your situation., 1,000 hours or one-year guarantee: optimal reliability., Available 24/7., Quickservice., We can always supply a replacement generator., Wide range of stock that can be supplied immediately.; Transport weight [kg]: 18221; Gross weight [kg]: 18221; Engine: C32 (Remanufactured by Cat); Accessories: Product features:, Drip-tray, Switch board, Volt meter, Amp meter, Hertz meter, Start battery, Exhaust system

Over 80 years experience in maintenance., Expert that jointly reflects on the ideal solution for your situation., 1,000 hours or one-year guarantee: optimal reliability., Available 24/7., Quickservice., We can always supply a replacement generator., Wide range of stock that can be supplied immediately.; Transport weight [kg]: 9000; Gross weight [kg]: 9000; Engine: C32 (Remanufactured by Cat ); Accessories: Product features:, Switch board, Volt meter, Amp meter, Hertz meter

Kurbelwellen,Zylinderköpfe,Motorblöcke,Pleuelstangen DB,MAN Deutz,Perkins,Volvo,Scania,MWM,Sisu-Valmet, geschliffen+Rißprüfung, überholt ab Lager sofort lieferbar. info@miw-zeven.de

Cat pump, model 70

We offer an Exchange overhault engine Caterpillar type: C13-LGK... Engine is general-overhault with guarantee. Also for chrusher contact: MIW GmbH Motoren-Instandsetzungs-Werk Nord-West-Ring 8 D-27404 Zeven, Germany Phone:0049 (0 4281-950583 fax :0049 (0)4281-950585 info@miw-zeven.de email:info@miw-zeven.de abc. miw-Zeve

overhault cylinder-head CAT 3116 DIT without valves 1.995,-, with new valves + spring 2550,- MIW GmbH Motoren-Instandsetzungs-Werk GmbH Nord-West-Ring 8 D-27404 Zeven phone:0049(0)4281 950583 Fax: 0049(0)4281-950585 info@miw-zevende

We have in stock 20 pcs, NEW CAT cylinder heads for sale AT SPECIAL PRICE. to fit 3520 CAT gas engines Part Number 415 5584 Email for Price and Photos.

Origin Prechamber Spark Plugs MWM CAT Part Number 12344096 Delivery time about 2 Weeks. Alternative Spark Plugs on request

Origin Spark Plug MWM CAT No 12344098 Delivery time about 2 weeks Alternatively, Spark Plug on request.

Catta Briga highpressure icecream homogeniser, cap 180 l/hr, 120 bar

Front forklift Caterpillar B12 Load capacity 6 t Mast height 3, 70 m Hours of operation 7.685 Max. Total weight 13.775kg

CAT C13 overhault engine bloc (RECON) CAT C13 overhault crankshaft (RECON) CAT C13 overhault connecting rods (RECON)

Crankshaft Recon Completely ground to 1st level: 0.025'' Tn. 6L7500 Attention: We also have various other RECON parts from different manufacturers/types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Catta Briga Eiscreme Homogenisator, 180 l/hr, 120 Bar. Sehr Guten Zustand.

MADE directly from the manufacturer with PREMIUM quality stock items Description: -Conveyor belt / conveyor belt made of rubber for many applications in industry, agriculture and construction industry - new, coated on both sides, open, 2-ply reinforced bottom cover made of PVC, with mounted metal connectors made of stainless steel to the endless connect -Dimensions: 9.152 mm x width 600 mm x thickness length approx. 6.5 mm, surface with tunnels. -With 15 piece rubber studs, 50 mm high, 600 mm long, distance approx. 610 mm,. On request we can cut the belt conveyors / conveyor belts to your individual measurements. (All lengths and widths possible) Additional versions, with pimples, Stollen or structured surfaces available. Statable VAT! Not is your desired size? No problem! We customize for you! More conveyor belts, drive belt and flat belt in all other sizes available immediately ...

AT- Motor Caterpillar Typ= C13-LGK... mit 385 PS bei @2.100 RPM komplett einbaufertig mit Starter,Lichtmaschine Alter Motor MUSS Bruch-und Rissfrei sein Fotos können auf Anfrage gesendet werden. MIW GmbH Motoren-Instandsetzungs-Werk Nord-West-Ring 8 D-27404 Zeven-Germany MIW-Zeven.de E-Mail:info@miw-zeven.de Tel: 0049 (0) 4281-950583 Fax: 0049(0) 4281-950585

1 X ABB CAT TURBO CHARGER. RECONDITIONED FOR CAT 3516C & 3520C Gas engine CAT PART NO: 254-0789

RECON -Part number: 1238650 -Gas ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

DEAR'S SALE, CAT 3412 GENERATOR BUILT 2001 500 KVA 60 Hz GOOD CONDITION Brgds Hakan KUSCU info@kscege.com

McIntyre 407 CAT Shear Designed to recover the precious metals found in Catalytic converters, JMC Cat shears also versatile enough to be used anywhere in your yard. Purpose Built McIntyre Cat shears have been purpose built for recovering precious metals from catalytic converters. The Catalytic converter is simply placed in the jaws and cut. The movement of the jaw is directly controlled by the moveable foot pedal and a V clamp holds the Cat in place during cutting. Once cut, the pinched end of the converter can be re-opened using the side bracket attached to the top jaw, allowing the contents to be poured out.

McIntyre 500 CAT Shear The 500 CAT is designed for those needing just a bit more blade length without an equivalent increase in price. Versatile The 500 CAT gives customers just a bit more blade length without a big price increase. It is powerful enough to handle most non ferrous cleaning and sizing operations, and can also be fitted with an optional bracket enabling it to assist when processing catalytic converters. Long-lasting In common with all JMC shears, the 500 CAT has been designed and built to last. Blades are deep hardened for extended life, hardened chrome rod is used in the hydraulic ram, and components are all choiceed according to their quality over and above their price.

Caterpillar engine C12 # BDL... an overhault,exchange engine with original CAT parts incl.turbo,sensors,controller,without starter+altenator Other CAT engines/parts from stock immediately available request Contact: MIW GmbH North-West-Ring 8 D-27404 Zeven/Germany Info@miw-Zeven.de phone: 0049(0) 4281-950583