board cutting used for sale

Dosing bunker incl. dosing roller Manufacturer: BOA / HUBER Type: 1500 H KTH 5700/ RH Year of Make: 2010 Technical data for the feed hopper (chain belt conveyor): Manufacturer: BOA Type 1500 H KTH 5700 Year of construction 2010 Length of feed belt 5700 mm Incline 0° Usable width 1400 mm Technical data of the dosing drum: Manufacturer: Huber Technik Fördersysteme Type RH Dosing Drum Year of construction 2010 Drive power 4 kW

used roll splitting machine Manufacturer: BOA (MBM) Type: RSM Year of construction: 1990 specifications: Roll width max.: approx. 1,800 mm Roll diameter max.: approx. 500 mm Drive power: 3 kW Drive via an electric motor with spindle with task table

used shredder Manufacturer: BOA Type: ALLIGATOR 550 - 100 Year of construction 2017 Specifications: Drive power: 55 kW Throughput: - 1,5 t/h for fine adjustment, and - up to 6.0 t/h with coarse setting Filler opening: 1,120 Rotor speed: 1,500 rpm Operating voltage: 400 V/50 Hz Insulation class: IP 55 Weight: approx. 5,200 kg

Used Roll Splitting Machine Manufacturer: BOA Type: RSM 40 t specifications: Roll width max.: approx. 2,600 mm Roller diameter max.: approx. 1,550 mm Drive power: 18.5 kW Cutting force: approx. 40 t Machine weight: approx. 5,500 kg including: Feed and take-off conveyor belt Drive power: 1.5 kW each Weight approx. 2,500 kg

Tot.kW 43 Volt 400V /50Hz

Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve -without: drive -Connection: C20 -Width: 120 mm -Nominal pressure: PN16 -Dimensions: 120/106/H207 mm -Weight: 3.7 kg

We sell our PPK baler. the main pump and auxiliary pump were replaced this year 2024. Invoices are available. The press only pressed cardboard boxes. It can be demonstrated and put into operation at any time.

Technical Parameters - Impact Chamber Diameter: 1,200 mm (48) - Number of Screens: 8 units / Design in HARDOX 400 - Rotor Equipment: 1 – 3 pairs of acceleration elements (Hardox 450) - Rotor Speed: 1,000 – 1,400 rpm - Inlet Opening (WxL): Approx. 800 x 400 mm - Drive Type: Power belt (Kraftriemen) --------------------------------------------------------------- Electrical Specifications Standard Drive (75 kW @ 1,500 rpm) - Voltage: 400V / 500V - Rated Motor Current: 134 A (at 400V) / 107 A (at 500V) - Fuse Protection: 160 A (at 400V) / 125 A (at 500V) Optional Drive (with 90 kW Frequency Converter) - Voltage: 400V / 500V - Rated Motor Current: 161 A (at 400V) / 129 A (at 500V) - Fuse Protection: 200 A (at 400V) / 160 A (at 500V) Find more here - .ucymachines/ Contact us at - sales@ucymachines

24 PICANOL PCB boards from PICANOL looms composed of: 3 x PICANOL AISQ-B/2C-1 ref. BE151623, 1 x PICANOL AISQ-B/4C-1 ref. BE151624, 4 x PICANOL GDLP-2 ref. BE152373, 1 x PICANOL J-1 ref. BE152379, 2 x PICANOL DTS-1 ref. BE153319, 4 x PICANOL AIS-C/HP/4C-4 ref. BE153947, 2 x PICANOL AISE/HPT280/TI/6C-4 ref. BE153951, 3 x PICANOL CPUE-3 ref. BE154114, 3 x PICANOL AUT-S/EP2C-3 ref. BE154180, 1 x PICANOL SUP-3 PH600S ref. BE205734

Board machine Type: Tronic 140/90-22 Manufacturer: OMAG Year: 1996 The board machine built in 1996, has been operated continuously since it was commissioned in 1997. For sale is not only the block machine itself but also the entire production line, allowing full use of the system after purchase. Several components of the mixing plant (e.g. core and face mix mixers), the bucket conveyor, wet side, transfer platform, dry side, and package buffer were renewed in 2009. The block machine remained in operation until the end of 2024 and can be inspected in fully functional condition. MACHINE DATA Block forming machine Board machine manufactured by OMAG, type TRONIC 140/90-22, year of manufacture 1996 Production of core and face mix Control system: Simatic S5 with visualization by Frima Board size: 1,400 × 1,000 mm Cross cleaning Quick mould clamping, pneumatic Sheet pulling dev ...

KlicK board plasterboard production machine was built in 2020 in Poland. The system has been specially designed for the production of innovative gypsum boards, which are used in residential and commercial construction. It features a number of state-of-the-art components with the best technical parameters, which significantly facilitate and accelerate the entire production cycle. The KlicK board plasterboard is distinguished by a unique snap-in section in the form of a click profile. This enables the board to be quickly and easily assembled at right angles, resulting in a stable outside corner. Simply fold the board along the profile and it clicks into the desired shape. During transport, the profile is secured by a transport strip, which is removed when the drywall is delivered to the assembly site. All this makes KlicK board an enormous saving in labour time. The entire production ...

UF Equipment 25 Foot Luxury Pontoon Boat – Very Fully Equipped Offered for sale: a UF Equipment 25 foot luxury pontoon boat, equipped with 3 floats and equipped with a very complete equipment. An ideal boat for relaxed day trips, fun sailing with family and friends, water sports and lounging on the water. The boat is equipped with, among other things: New Yamaha 100HP engine with European warranty CE Certificate Bimini top front and center Hydraulic steering Hydraulically tiltable central roof Ski bracket 2 batteries: 1 starter battery and 1 accessory battery Fold-out changing room / toilet room Bluetooth stereo Rear lounger, easy to fold into a comfortable sofa Simrad navigation system Digital meters Side mounting lever for forward and reverse Shore power connection USB Connectors Spotlights In short: a luxurious and fully equipped pontoon boat, where comfort and ease of use are  ...

CNC control, PLC control, electronic modules, PLC module, plug-in card circuit board, circuit board, circuit board -Manufacturer: Baldor, circuit board electronic module circuit board from press brake HACO PPES 30135 -Type: TEM 060-06-01-1 -Individual components: see photos -Dimensions: 165/100/H250 mm -Weight: 0.9 kg

PLC control, electronic modules, PLC module, plug-in card circuit board, circuit board, circuit board -Manufacturer: Mikron, electronic module circuit board from CNC milling machine Mikron UME 600 -Type: 958 78 11 200 -Dimension: 145/110/H55 mm -Weight: 0.4 kg

FQJ-1800 honeycomb board cutting machine was built in 2019 in China by SAN (QINGDAO) INTERNATIONAL TRADE CO., LTD. The machine is designed for cutting strips of honeycomb cardboard with a maximum thickness of 80 mm. The high cutting accuracy ensures repeatable dimensions of the elements, thus reducing material waste and increasing the efficiency of the production process. Honeycomb board is characterised by high rigidity, low weight and resistance to compression. Thanks to these properties, it is used as a filling material for interior doors, as well as a protective material for goods during transport. The FQJ-1800 is equipped with three blades that provide a clean, even cutting without damaging the characteristic structure of the material. The adjustable cutting speed from 0 to 50 m/min enables the operating parameters to be adapted to the type of honeycomb board being cut, ensuring  ...

PLC controller, electronic modules, PLC module, plug-in card circuit board, circuit board -Manufacturer: Mikron, Electronic module circuit board for operating unit TCD22, original packaging -Type: WW TCD 22 Art.No. 104.73.20.041 -Cardboard dimensions: 410/310/H65 mm -Weight: 0.6 kg

Qty. 1 Second-hand board paper mill Mfc.: JUNG KWANG, NYM Machinery, Built: TBA Stopped: 2017 Type of Machine: Multi Cylinder Mold ( easy Former ) Grade of paper: Board paper , Liner board paper Basic Weight: 180 g/m2 ~ 550 g/m2 Slice Width: 3150 mm Operation Speed: 150 ~ 50 m/ Min. Production capacity : 130 ~ 100 T / day Current condition: installed on foundation

CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, power board -Manufacturer: Heidenhain, power board CNC control -Type: PL 405 B -ID No.: 263 371 22 -Voltage: 24V -Quantity: 2x circuit board available -Price per piece -Dimensions: 280/230/H50 mm -Weight: 1.2 kg/pc.

Unused, Including trailer, 90L fuel tank, Captain chair rotatable and height adjustable, relax benches with backrest, storage compartments under seats, mp3 player with bluetooth, 5 speakers, navigation lighting, LED lighting under benches and under the boat, appearances for on the boat, stainless steel cleats, foldable bimini top in 2 parts, stainless steel swimming ladder, boat cover, 2 round tables with cup holders table is foldable, hydraulic steering system. Viewing by appointment only. Delivered as a kit, construction possible at an additional cost Auction-ID: A1-40321-15

Boat trailer U.F.A.C. Roubaix – Type L320 U.F.A.C. Roubaix boat trailer, type L320, intended for the transport of a small boat. The manufacturer's plate indicates a total authorised rolling weight of 400 kg, as well as the number 2730/25. Trailer equipped with a galvanised chassis, a front winch with strap, a jockey wheel, rollers and adjustable supports allowing adaptation to different hulls. It also has mudguards and a set of wheels with metal rims. The tyre pressure indicated on the manufacturer's plate is 2.5 kg. The general condition shows traces of use, ageing and surface oxidation on certain elements. The tyres are old and should be checked before use. Plan for a change of rope Winch ok Auction-ID: A3-46128-33664

Foldable RIB FRIB360 dinghy, equipped with Evinrude 35 hp petrol outboard motor and additional Minn Kota electric motor. Includes boat trailer, external fuel tank and storage cover for the boat when it is lowered. CE category C, suitable for up to 4 people and a maximum load capacity of 700 kg. Tubular pressure according to type plate 0.25 bar. The boat and engine are working properly. Used condition, signs of wear visible in the photos. Auction-ID: A3-46102-22097

Available in stock 1 x Used Capstone ECM Control Board (P/N 512300-030). Most commonly used for Microturbines C60. Please note that this is an used and damaged board, buy it only if you wish to use it for parts or to refurbish. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Available in stock 1 x Used Capstone ECM Board. Most commonly used for Microturbines C60. The board is complete with all parts. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Boat accessories, ship accessories, spreader schooners, mooring schooners, fenders, lifeline cushions, railing schooners, boats, ships -approx. 180 positions boat accessories - see photos -we can send you the complete photos of the positions - will only be sold complete

Control Card / Plug-in Circuit / PCB Board for Bobst Alpina 110 II matic. Control card / plug-in circuit / PCB board for Bobst Alpina 110 II matic. BSA0701239601

CNC control, operator panel, control console, operating unit, card slot, control cards, MC3 control, plug-in cards, circuit boards -Manufacturer: Krauss Maffei, MC3 control plug-in cards, circuit boards made from injection molding machine -Temperature controller card: Gossen Pantatherm DS 4 (3 pieces) -DC-DC Converter: Elba euro module PCD 54 CP on breadboard: Krauss Maffei AN 100 -Prop. Amplification: Bosch 0 811 405 015 / 0 811 405 002 / 0 811 405 099 -Plug-in card: Krauss Maffei SK201 -Individual components: see photos -Price/Sale: complete -Dimensions: 480/215/H270 mm -Weight: 4.8 kg

CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, printed circuit boards -Manufacturer: Gossen, control plug-in cards circuit boards -Switching regulator card: Constant S83 S5 EU 12 -Plug-in card: 7204-6072C0 -Temperature controller card: Gossen Pantatherm DS 4 4400-S 8 pieces -Individual components: see photos -Price/sale: complete -Dimensions: 480/215/H270 mm -Weight: 5.2 kg

Interface, data acquisition device, test device, telemetry system, probe interface, printed circuit board electronic module -Manufacturer: Stiefelmayer, circuit board from coordinate measuring machine Stiefelmayer C 100 413514 -Type: 413100-89 -Dimensions: 115/80/H55 mm -Weight: 0.2 kg

PLC controller, electronic modules, PLC module, plug-in card circuit board, circuit board, PCB, isolated gateway Manufacturer: LCL, PCB isolated gateway made of Pro-face monitor Schneider Electric GP-4301TW -Type: GW101D.hex -Quantity: 4x circuit boards available (1x with accessories, see photos) Price: per piece -Dimensions: 130/125/H20 mm / 130/125/H25 mm -Weight: 0.1 kg / 0.3 kg

Fosber CAR 280 – Corrugated-board prefeeder Year: 1990 Prefeeder for supplying sheets to corrugated-board converting machinery. Installed upstream of a Bobst 1628. Format range, transfer height and interfaces on request. Reference: PP-48791 Further information on request.

Bamdura decking board 4000x143x22.5 mm – Grey Co-extrusion decking board with hollow profile. Lightweight, strong and low maintenance. Resistant to weather influences and discoloration. Suitable for terraces and outdoor floors. Gray finish. Auction-ID: A1-45113-2263

Composite decking boards Lava CP2 – 360 × 14.6 × 2.5 cm Hollow boards with double-sided anti-slip grooves for firm grip and durable finish. Auction-ID: A1-45113-2260

Bamdura decking board 2200x143x22 mm – Grey Co-extrusion decking board with hollow profile. Lightweight, strong and low maintenance. Resistant to weather influences and discoloration. Suitable for terraces and outdoor floors. Gray ribbed finish. Auction-ID: A1-45113-2267

Composite decking boards Lava CP2 – 360 × 14.6 × 2.5 cm Hollow boards with double-sided anti-slip grooves for firm grip and durable finish. Auction-ID: A1-45113-2259

Composite decking boards Lava CP2 – 360 × 14.6 × 2.5 cm Hollow boards with double-sided anti-slip grooves for firm grip and durable finish. Auction-ID: A1-45113-2261

Bamdura decking board 2800x143x22 mm – dark grey. Solid co-extrusion decking board. Very strong, dimensionally stable and low maintenance. Resistant to moisture, UV radiation and discoloration. Suitable for terraces and intensive use. Dark gray wood look finish. Auction-ID: A1-45113-2270

Bamdura decking board 2200x143x22 mm – brown. PE decking board with hollow profile. Lightweight, strong and low maintenance. Resistant to weather influences and discoloration. Suitable for terraces and outdoor floors. Brown ribbed finish. Auction-ID: A1-45113-2272

Bamdura decking board 2900x146x23 mm – Grey PE decking board with hollow profile. Lightweight, strong and low maintenance. Resistant to weather influences and discoloration. Suitable for terraces and outdoor floors. With gray ribbed finish. Auction-ID: A1-45113-2266

Bamdura decking board 3600x143x22.5 mm – bi-colour grey (light grey and dark grey). Co-extrusion decking board with hollow profile. Lightweight, strong and low maintenance. Resistant to weather influences and discoloration. Suitable for terraces and outdoor floors. Gray wood look finish. Auction-ID: A1-45113-2264

Bamdura decking board 2200x143x22 mm – grey. Co-extrusion decking board with hollow profile. Lightweight, strong and low maintenance. Resistant to weather influences and discoloration. Suitable for terraces and outdoor floors. Gray wood look finish. Auction-ID: A1-45113-2268

Bamdura decking board 3600x143x22.5 mm – Grey PE decking board with hollow profile. Lightweight, strong and low maintenance. Resistant to weather influences and discoloration. Suitable for terraces and outdoor floors. Gray wood look finish. Auction-ID: A1-45113-2265

Input Board PC 1 NE 80 (Grundig 9.44904-1706 FD-Nr. 6006 04 100643) Exchange 520,-€ + Mwst Without Exchange 620,-€ + Mwst Features of our PCB are - A new built up PCB with technology SMD (No PCB revised for many years) - Where it was possible electrolytic capacitors were substituted with ceramics - Components for repair the next decades available - Newer and more efficient components. -Doubling of the source capacity -Less warm development etc. Their advantages are -Cost reduction on a minimum -The newest technology in the usual control -Spare part availability the next decades guaranteed -No consequential costs by decades old repaired PCB

Input and Output Board PC 1 NEA 80 (Grundig 9.44904-1707 FD-Nr. 6006 04 100642) Exchangeprice 520,-€ with Exchange 620,-€ Features of our PCB are - A new built up PCB with technology SMD (No PCB revised for many years) - Where it was possible electrolytic capacitors were substituted with ceramics - Components for repair the next decades available - Newer and more efficient components. -Doubling of the source capacity -Less warm development etc. Their advantages are -Cost reduction on a minimum -The newest technology in the usual control -Spare part availability the next decades guaranteed -No consequential costs by decades old repaired PCB

Semi-automatic board sorting Year of construction - ca 1997 Box quantity - 7 + 1 Task table, tilting table, separation, sorting, capping Infrared messystem Computer control Top Condition

Input Board PC 2 NE 90 (Grundig 9.44904-1708 FD-Nr. 6006 04 100662) Exchange 400,-€ + Mwst without Exchange 500,-€ + Mwst Features of our PCB are - A new built up PCB with technology SMD (No PCB revised for many years) - Where it was possible electrolytic capacitors were substituted with ceramics - Components for repair the next decades available - Newer and more efficient components. -Doubling of the source capacity -Less warm development etc. Their advantages are -Cost reduction on a minimum -The newest technology in the usual control -Spare part availability the next decades guaranteed -No consequential costs by decades old repaired PCB

Input and Output Board PC 2 NEA 90 (Grundig 9.44904-1709 FD-Nr. 6006 04 100663) Exchange 480,-€ + Mwst without Exchange 580,-€ + Mwst Features of our PCB are - A new built up PCB with technology SMD (No PCB revised for many years) - Where it was possible electrolytic capacitors were substituted with ceramics - Components for repair the next decades available - Newer and more efficient components. -Doubling of the source capacity -Less warm development etc. Their advantages are -Cost reduction on a minimum -The newest technology in the usual control -Spare part availability the next decades guaranteed -No consequential costs by decades old repaired PCB

Elb Control Board 03.21.20

Marposs board 6307473300

Qty. 1 Second-hand Duplex board paper mill Mfc.: Hasegawa, Yodogawa, Fuyo Japan, Valmet, Finland, Kumsun, Chung Korea Buil: 1984 Width: 3400 mm Speed: 330 m/min. Productivity: 450 ton/day max. 350 ton/day (average) GSM: Max.500 g/m2 -The number of HEAD BOX: 7 sets -Fourdriner type -Dryer: 77 ea (Air type+Electric type)

Available in stock 2 x Used Capstone User Connection Boards. Most commonly used for Microturbines C30. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.