We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
121,993 used machines on RESALE, but how to find them? Machine Search
used
Technical data baler: Manufacturer BOA Type 2100 75 (8) PR SD Year of manufacture 1995 Operating hours 9,163 hours, as of June 23 Pressing force main press 90 t Operating pressure 280 bar Dimensions of feed chute 1,620 x 1,080 mm Filling volume / pressing cycle 2.4 m³ Bale dimensions 1,100 x 1,100 mm, length variably adjustable 800 up to 1,600 mm Drive power 2 x 37 kW Connected load 92 kW Tying system 4-fold vertical, fully automatic, prepared for 8-fold cross binding Throughput rates for quality: B12 / B19 approx. 10 t/hour, bale weight up to 1200 kg/bale Foil approx. 10 t/hour, bale weight up to 800 kg/bale Hydraulic oil tank capacity 1,500 L PLC control system Siemens SIMATIC S7-1500, renewal in 2020 Press dimensions built up with hopper 15,000 x 6,000 x 6,500 mm (l x w x h) Transport dimensions 12,800 x 2,500 x 3,100 mm (l x w x h) Machine weight press approx. 30 t Noise level
used
Technical data baler: Manufacturer BOA Type 2040.S.5V.71.37 Year of manufacture 2003 Operating hours approx. 35,598 hours, as of March Pressing force main press 71 t Specific pressing pressure 9.1 kg/cm² Operating pressure 280 bar Dimensions of feed chute 1,620 x 1,080 mm Bale dimensions 1,100 x 1,100 mm, length variably adjustable 800 up to 1,600 mm Drive power 37 kW Tying system 5-fold vertical, fully automatic Throughput rates for quality: B12 / B19, 40 ? 60 kg/cm³, up to approx. 9 t/hour, bale weight up to 850 kg/bale, depends on material Hydraulic oil tank capacity 800 l Transport dimensions 10,020 x 2,400 x 3,400 mm (l x w x h) Machine weight press approx. 24 t Noise level
used
A complete baling press system is for sale, consisting of a chain belt conveyor, the baling press with wire stations and bale chute. Technical data baler: Manufacturer BOA Type Impress D130.110.B.5-(5R).1.6 Year of construction 2009 Press power main press 127 tons Specific press capacity 10,7 kg/cm² Working pressure 280 bar Feed channel 1.620 x 972 mm (l x w) Press volume / cycle 4,1 cbm Volume throughput without load up to 865 cbm/hour Cycle time under operating conditions 22 sec. Press stroke 2.900 mm Bale size 1.100 x 1.100 mm (w x h) length adjustable Driving power 2 x 55 kW Connected load 132 kW Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm up to 17 to/h bulk weight of 50 kg/cbm up to 29 to/h bulk weight of 100 kg/cbm up to 37 to/h bulk weight of 150 kg/cbm up to 51 to/h Bale weight up to 1.200 kg Volume hydraulic oil ...
used
used baler Manufacturer: BOA Type: IMPRESS D225-Eco Year of construction: 2022 Operating hours: 1.178 (am 29.03.2023) Specifications: Pressing force: 2112 kn / 215 t Specific pressing force: 16.0 kg/cm² Filling opening: 1,620 x 1,000 mm Bale format: 1,100 x 1,200 x length (adjustable) mm Drive power: 3 x 45 kW theoretical output: approx. 750 m³/h (without material) Throughput under operating conditions: - at 30 kg/m³ approx. 16-18 t/h - at 60 kg/m³ approx. 28-30 t/h - at 100 kg/m³ approx. 40-42 t/h - at 150 kg/m³ approx. 50-52 t/h - at 200 kg/m³ approx. 62-64 t/h Total connected load: 250 kW / 500 A Operating voltage: 400 V / 50 Hz electrical insulation: IP 54 Binding: 5 x vertical + 5 x horizontal Bale weight: up to approx. 1,400 kg Machine dimensions: 13,400 x 2770 x 3,065 mm (L x W x H) Machine width with additi ...
used
used baler Manufacturer: BOA Type: IMPRESS D225-Eco Year of construction: 2022 Operating hours: 1.178 (am 29.03.2023) Specifications: Pressing force: 2112 kn / 215 t Specific pressing force: 16.0 kg/cm² Filling opening: 1,620 x 1,000 mm Bale format: 1,100 x 1,200 x length (adjustable) mm Drive power: 3 x 45 kW theoretical output: approx. 750 m³/h (without material) Throughput under operating conditions: - at 30 kg/m³ approx. 16-18 t/h - at 60 kg/m³ approx. 28-30 t/h - at 100 kg/m³ approx. 40-42 t/h - at 150 kg/m³ approx. 50-52 t/h - at 200 kg/m³ approx. 62-64 t/h Total connected load: 250 kW / 500 A Operating voltage: 400 V / 50 Hz electrical insulation: IP 54 Binding: 5 x vertical + 5 x horizontal Bale weight: up to approx. 1,400 kg Machine dimensions: 13,400 x 2770 x 3,065 mm (L x W x H) Machine width wit ...
used
used roll splitting machine Manufacturer: BOA (MBM) Type: RSM Year of construction: 1990 specifications: Roll width max.: approx. 1,800 mm Roll diameter max.: approx. 500 mm Drive power: 3 kW Drive via an electric motor with spindle with task table
used
used shredder Manufacturer: BOA Type: RINO 750 - 160 Year of construction 2022 Specifications: Drive power: 55 kW Throughput: 10 - 15 t/h Noise level: approx. 90 dB(A) Filling opening: 1,600 Rotor speed: 1,000 rpm Operating voltage: 400 V/50 Hz Insulation class: IP 54 including: - Changeover flap Optional: - with feed belt
used
used shredder Manufacturer: BOA Type: ALLIGATOR 550 - 100 Year of construction 2017 Specifications: Drive power: 55 kW Throughput: - 1,5 t/h for fine adjustment, and - up to 6.0 t/h with coarse setting Filler opening: 1,120 Rotor speed: 1,500 rpm Operating voltage: 400 V/50 Hz Insulation class: IP 55 Weight: approx. 5,200 kg
used
Technical data baler: Manufacturer BOA Recycling Systems B.V. Type Impress D225-165-D-5V/5H-1.6 Year of manufacture 2022 Operating hours 1,486 hours, as of June 2023 Pressing force main press 2,211 kN or 211 t Specific pressing force 17.5 kg/cm² Working pressure 280 bar Press stroke main hydraulic cylinder 2,900 mm Average cycle time 23 seconds Dimensions of feed chute 1,620 x 972 mm Volume of press chamber 4.4 m³ Bale dimensions 1,100 x 1,200 mm, length variable Drive power 3 x 45 kW Total connected load 250 kW, 500 A Tying system 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates with a bulk density of 30 kg/cbm up to 20 t/hour Bulk density of 60 kg/cbm up to 33 t/hour Bulk density of 100 kg/cbm up to 46 t/hour Bulk density from 150 kg/cbm up to 56 t/hour Bulk weight from 200 kg/cbm up to 69 t/hour Bale weights up to 1300 kg, depending on material Hydraulic oil tank ...
used
Technical data baler: Manufacturer BOA Recycling Systems B.V. Type Impress D225-165-D-5V/5H-1.6 Year of manufacture 2022 Operating hours 1,568 hours, as of June 2023 Pressing force main press 2,211 kN or 211 t Specific pressing force 17.5 kg/cm² Working pressure 280 bar Press stroke main hydraulic cylinder 2,900 mm Average cycle time 23 seconds Dimensions of feed chute 1,620 x 972 mm Volume of press chamber 4.4 m³ Bale dimensions 1,100 x 1,200 mm, length variable Drive power 3 x 45 kW Total connected load 250 kW, 500 A Tying system 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates with a bulk density of 30 kg/cbm up to 20 t/hour Bulk density of 60 kg/cbm up to 33 t/hour Bulk density of 100 kg/cbm up to 46 t/hour Bulk density from 150 kg/cbm up to 56 t/hour Bulk weight from 200 kg/cbm up to 69 t/hour Bale weights up to 1300 kg, depending on material Hydraulic oil tank ...
used
Press which can be used for manufacturing seals / (resin) composite parts / compression molding / circular sawblades / abrasive products / pressing from (metal)powder to parts / ... with 3 heated tables + 2 watercooled tables max 220 - 240° Cnbsp; Press has been developed to be able to remain under pressure for 24 hours! Capacity: 150 ton Passage between uprights: 670 mm Max stroke: 600 mm Distance between table -- ram: 600 mm Table: 670 x 670 mm Length: 1120 mm Depth: 1200 mm Height: 3600 mm Compression press / Grinding wheel press / Vulcanizing press / Elastomer press Kompressionspresse / Schleifscheiben Presse / Vulkanisierpresse / Elastomer Presse Height: 3600 mm
used
Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve -without: drive -Connection: C20 -Width: 120 mm -Nominal pressure: PN16 -Dimensions: 120/106/H207 mm -Weight: 3.7 kg
used
Tot.kW 43 Volt 400V /50Hz
used
TFT Display Control Board Board KORDIS NCB100X1 Supply voltage: 12 V DC Power consumption: 30 watts analog RGB input New ! Dimensions : 145 x 102 x 15 mm
used
24 PICANOL PCB boards from PICANOL looms composed of: 3 x PICANOL AISQ-B/2C-1 ref. BE151623, 1 x PICANOL AISQ-B/4C-1 ref. BE151624, 4 x PICANOL GDLP-2 ref. BE152373, 1 x PICANOL J-1 ref. BE152379, 2 x PICANOL DTS-1 ref. BE153319, 4 x PICANOL AIS-C/HP/4C-4 ref. BE153947, 2 x PICANOL AISE/HPT280/TI/6C-4 ref. BE153951, 3 x PICANOL CPUE-3 ref. BE154114, 3 x PICANOL AUT-S/EP2C-3 ref. BE154180, 1 x PICANOL SUP-3 PH600S ref. BE205734
used
Semi finished, just missing these price for each boat finished or we trade in the state they are.
used
Machine was barely used.
used
Input Board PC 1 NE 80 (Grundig 9.44904-1706 FD-Nr. 6006 04 100643) Exchange 520,-€ + Mwst Without Exchange 620,-€ + Mwst Features of our PCB are - A new built up PCB with technology SMD (No PCB revised for many years) - Where it was possible electrolytic capacitors were substituted with ceramics - Components for repair the next decades available - Newer and more efficient components. -Doubling of the source capacity -Less warm development etc. Their advantages are -Cost reduction on a minimum -The newest technology in the usual control -Spare part availability the next decades guaranteed -No consequential costs by decades old repaired PCB
used
Input and Output Board PC 1 NEA 80 (Grundig 9.44904-1707 FD-Nr. 6006 04 100642) Exchangeprice 520,-€ with Exchange 620,-€ Features of our PCB are - A new built up PCB with technology SMD (No PCB revised for many years) - Where it was possible electrolytic capacitors were substituted with ceramics - Components for repair the next decades available - Newer and more efficient components. -Doubling of the source capacity -Less warm development etc. Their advantages are -Cost reduction on a minimum -The newest technology in the usual control -Spare part availability the next decades guaranteed -No consequential costs by decades old repaired PCB
used
Semi-automatic board sorting Year of construction - ca 1997 Box quantity - 7 + 1 Task table, tilting table, separation, sorting, capping Infrared messystem Computer control Top Condition
used
PSU PC 2 NSV 90 (Grundig 9.44904-906 FD-Nr. 6006 04 100664) Exchangeprice 430,-€ with Exchange 530,-€ Features of our PCB are - A new built up PCB with technology SMD (No PCB revised for many years) - Where it was possible electrolytic capacitors were substituted with ceramics - Components for repair the next decades available - Newer and more efficient components. -Doubling of the source capacity -Less warm development etc. Their advantages are -Cost reduction on a minimum -The newest technology in the usual control -Spare part availability the next decades guaranteed -No consequential costs by decades old repaired PCB
used
PSU PC 1 NSV 80 (Grundig 9.44904-1705 FD-Nr. 6006 04 100640) Exchangeprice 500,-€ with Exchange 600,-€ Features of our PCB are - A new built up PCB with technology SMD (No PCB revised for many years) - Where it was possible electrolytic capacitors were substituted with ceramics - Components for repair the next decades available - Newer and more efficient components. -Doubling of the source capacity -Less warm development etc. Their advantages are -Cost reduction on a minimum -The newest technology in the usual control -Spare part availability the next decades guaranteed -No consequential costs by decades old repaired PCB
used
Input Board PC 2 NE 90 (Grundig 9.44904-1708 FD-Nr. 6006 04 100662) Exchange 400,-€ + Mwst without Exchange 500,-€ + Mwst Features of our PCB are - A new built up PCB with technology SMD (No PCB revised for many years) - Where it was possible electrolytic capacitors were substituted with ceramics - Components for repair the next decades available - Newer and more efficient components. -Doubling of the source capacity -Less warm development etc. Their advantages are -Cost reduction on a minimum -The newest technology in the usual control -Spare part availability the next decades guaranteed -No consequential costs by decades old repaired PCB
used
Input and Output Board PC 2 NEA 90 (Grundig 9.44904-1709 FD-Nr. 6006 04 100663) Exchange 480,-€ + Mwst without Exchange 580,-€ + Mwst Features of our PCB are - A new built up PCB with technology SMD (No PCB revised for many years) - Where it was possible electrolytic capacitors were substituted with ceramics - Components for repair the next decades available - Newer and more efficient components. -Doubling of the source capacity -Less warm development etc. Their advantages are -Cost reduction on a minimum -The newest technology in the usual control -Spare part availability the next decades guaranteed -No consequential costs by decades old repaired PCB
used
Elb Control Board 03.21.20
used
Marposs board 6307473300
used
Modules IPC 620-0033, 620-0036 and others
used
see picture and on A.
Qty. 1 Second-hand Duplex board paper mill Mfc.: Hasegawa, Yodogawa, Fuyo Japan, Valmet, Finland, Kumsun, Chung Korea Buil: 1984 Width: 3400 mm Speed: 330 m/min. Productivity: 450 ton/day max. 350 ton/day (average) GSM: Max.500 g/m2 -The number of HEAD BOX: 7 sets -Fourdriner type -Dryer: 77 ea (Air type+Electric type)
Electronics / Board CNC cross-cutting system Paul 14E Y/O'A 1998
used
Repair and Exchange service Repair and replacement service SERVICE MAZAK MITSUBISHI NETZTEIL POWER SUPPLY MDS-A-CV-370 – Repair price depending on the effort. Max. 1400 – € Through our Mazak machine simulators, we are able to test almost ALL Mazak Mitsubishi power supplies under load. Long-term tests are also possible. We repair your Mazak Mitsubishi power supply at a flat rate or at cost. The amount of work is about 1-3 days. Urgent repairs are also possible. The warranty on the repair is 6 months. Repairing other power supplies on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.
used
Lamidesk EasyShift 400/160 Laminator Lamidesk EasyShift 400/160 Flatbed Laminator Characteristics: max. lamination width: 1600 mm max. lamination length: 4000 mm min. table height: 850 mm max. clearance height: 60 mm Max. speed: 0 - 25 m/min Control: Roller pressure: pneumatic Engine operation: yes Speed: Rotary control Equipment: Countertop: 10 mm toughened safety Height adjustment: optional Table lighting: optional Propulsion: Motor / manual Heated roller: optional Movable (rollers): yes Specifications: Compressor connection: Euro plug Air pressure / demand: 6 bar - 4 l/min. Power supply: 240 V Power consumption / with LED: 380 W / 780 W Device dimensions: 4710 x 1950 x 1000 mm Weight device: approx. 630 kg Quality LamiDesk is manufactured with well-known components that are available worldwide. The use of these components ensures continuous operation a ...
used
Control, circuit boards, spare parts for Arburg, injection molding machines -Type: ARB 389 D KPL -Weight: 0.5 kg
used
Width 500 mm Options for PVA glue
used
installation consisting of the following components: - glue station for 2-component glue - Input table with motorized rollers and 90 ? rotation - Composition table and loading in the press - Press model FAST / 130 - Horizontal pressure installation mounted on adjusted beam - Outfeed roller conveyor, not motorised technical data: dimensions of strips: length: 900 to 8,000 mm width: 20 to 45 mm height: 50 to 200 mm plates to be produced: length 8000 mm, 2 x 4000 mm, 4 x 2000 mm or 4 x 900 mm Bonding press: Dimensions: 1300 x 8500 mm press opening: 250 mm. Total pressure: approx. 200 tons 12 x overhead hydraulic pressure cylinders 2 rows of cylinders can be switched off 17 x lateral cylinders, individually switchable horizontal pressure 7 kg / cm? Attached electric boiler for thermal oil
used
Plate Cart
used
Available in stock 1 x Used Capstone Liquid Fuel Control Board. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.
used
Available in stock 1 x Used Capstone ECM Power Board. Most commonly used for Microturbines C60. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.
used
Available in stock 1 x Used Capstone DPC Power Board. Most commonly used for Microturbines C30. The power board is used but is in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.
used
Available in stock 2 x Used Capstone User Connection Boards. Most commonly used for Microturbines C30. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.
used
Available in stock 1 x Used Capstone LCM Power Board. Most commonly used for Microturbines C60. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.
used
Available in stock 2 x Used Capstone Hybrid Control Boards. Most commonly used for Microturbines C60. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.
used
Available in stock 1 x Used Capstone ECM Control Board (P/N 512300-030). Most commonly used for Microturbines C60. Please note that this is an used and damaged board, buy it only if you wish to use it for parts or to refurbish. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.
used
Available in stock 1 x Used Capstone LCM Board. Most commonly used for Microturbines C60. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.
used
Laminator - paper over board Make Tùnkers Model S-1100 Year ///// Workingwidth 1100 mm As standard laminator Automatic feeder - register - full surface gluing - manual feeder into automatic lamination station - pressing belt - delivery on table As spot label gluer Automatic feeder - register - full surface gluing - alignment for manual placement on vacuüm belt - pressing belt - delivery on table Both options ? Okay ! Automatic feeder - register - full surface gluing - alignment for manual placement on vacuüm belt OR manual feeder into automatic lamination station - pressing belt - delivery on table Delivery delivery on a table Condition example machine sold throughly refurbished by us almost consessionless - this machine is eventually obtainable from the USA - all new pneumatic - all new shafts for the pressing station - all bearings replaced - all new belts - all ...
used
Available in stock 1 x Used Capstone ECM Board. Most commonly used for Microturbines C60. The board is complete with all parts. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.
used
Available in stock 1 x Used Capstone Brake Resistor for DPC Board. Most commonly used for Microturbines C30. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.
used
Torwegge H293 is a special machine. The panel length of the machine is 2.65 m. – the panel width is 10 m.- the panel thickness is from 10mm to 50mm.
used
Hotmelt glue applicator conveyer for gluing of currogated boxes Make Nordson Model Conveyer Year 1998 ? Glue appliance width 120 cm (240 cm) Glue melter Nordson Vista Glue computer Nordson Eclipse EPC15 Number of heads 4 heads (Meier) Application to apply up to 4 lines of glue onto a substrate on the belt. commonly a corrugated box Available direct
used
Output: 720 pair/h, number of forms: 10, connected load: 13kW, length: 1934mm, width: 1737mm, height: 1910mm, operational hours counter: ca. 100h, including documentation and 20 forms.