boa baler used for sale

Vacuum drying oven Manufacturer A. Meier Ebfgo2r Small drying plant Built: 1988 B/h: abgel. 6700 hrs Control panel Siemens Chorus OP5 Kammerabm. approx. 760 x 900 x 400mm 400 V connection Device fully functional. The device was used after cleaning electronic circuit boards. Device is released due to operational resolution.

Manufacturer: Hamba Maschinenfabrik GmbH Type: 2400 Y.O.M.: rebuilt by Grunwald 1993 Capacity: up to 2400 Bech./h (depending on the product) lanes: 1-lane, 12-plate Filling: semi-liquid products such as cream cheese, yoghurt, cream, ayran etc. Filling volume: 100 - 500 ml , adjustable Cup size: round, 95 mm Type of closure: aluminium board, sealing Connection values: 380 V, 50 Hz, 1.7 KW Outlet conveyor included Optional: Machine overhaul possible

– Italian production – year of production 2000 –DTR TECHNICAL PARAMETERS: track width 300 mm cutting height 120 mm engine power 25 kW .max. disc diameter 350 mm .max. element width 1000 mm Min. element length 400 mm feed adjustable on the inverter ruler on the right side pneumatically adjustable revolver scale setting 6 types three rows of anti-jet latches possibility of putting on a board - shoe spindle diameter 50 mm sleeve diameter 70 mm sleeve equipped with spacers automatic central lubrication four upper pressure shafts connection diameter 180 mm and 120 mm machine dimensions (L/W/H) 210 / 175 / 160 cm weight 1800 kg

Rotary board cutter & creaser & half cutting Krause Model J138-LV/80 Year 1980's Creasing length 1300 mm 1st "station" 6 sets of half cutting tools 2nd "station" 7 sets of creasing tools to make a W shape 3rd "station" 7 sets of circular knives Table with side alignment & with push system Speed controlled by means of a spead pulley

Description Conversion kit high-speed cutter Wohlenberg from Monitor Tube chassis system 85/86/90 to LCD chassis The following steps are necessary for the conversion to LCD: 1. Disassemble the monitor chassis 2. Remove the picture tube and circuit board (ventilate the tube properly, dispose of) 3. Function keys, alpha keyboard is retained (if available) 4. New LCD chassis, loosen nuts and lift the frame 5. Insert chassis from behind, attach front bezel and screw it in place 6. AMP connector from the CPU unplug, eject contacts 7. Set the voltage on the potentiometer to 12 volts 8. Press in new pins after enclosed pin assignment 9. For System 86/90, pinch off the crimp contacts and insert them into the pin header 10.AMP connector System 85 / Plug in pin header on System 86 11.For System 86/90, tap the voltage on the switching power supply (snap terminals) 12.Settings of the LCD monitor are ...

– German production –DTR – optimization of cutting width – dripping cross saw – automatic blade spacing – year of production 1989 TECHNICAL PARAMETERS: .max. element width 920 mm .max. element height 90 mm .max. element length 6000 mm main engine power 37 kW disc diameter max. 300 mm spindle diameter 60 mm sleeve diameter 70 mm fixed sleeve with a length of 60 mm floating sleeve for 1 disc floating sleeve with spindle length of 100 mm number of measuring heads 15 measuring head spacing 350 mm distance between measuring heads total input power 10 kW cross-cut saw for cutting material for a length of 2630 mm saw leveling the material cascade for transporting the board hydraulic feed in smooth speed control hydraulic material pressure hydraulic material height adjustment

Bread-long wrapper S&P ELR -Bandwidth 88cm -400 volts -mobile on wheels -with 2 boards of act

Machine description • Machine body designed as torsion-stiff steel welded construction with high static and dynamic stiffness of the welding assemblies • Drive of the upper and bending cheeks on both sides via controlled high-performance drive motors with worm gears • Force initiation of the bending cheek on both sides via tooth segments • Adjustment of the lower cheek mechanically • Adjustment of the bending cheek lowering electromotor • Tool set consisting of: • Clamping rail for upper cheek pointed rail mechanically • Oberwangenspitzschiene • Lower cheek rail with finger grooves • 2 bending rails • Rear stop with 10 stop fingers integrated in support table, max. stop size 1000 mm • Color similar to RAL 7038 / 5010 • Machine in good condition / little used / regularly serviced Working width (useful length) 3020 mm Wor ...

Baler Presto CC 20 M, year of construction 2016, pressing force 20 t Specifications: Manufacturer: Presto Type: CC 20 M Year of construction: 2016 Pressing force: 20 t Cycle time: 24 s Drive power: 7.5 kW Filling opening: 1030 x 750 mm Binding: 3-fold Throughput at bulk density of 35 kg/m³ - 1.6 t 60 kg/m³ - 2,3 t 100 kg/m³ - 2,8 t Bale dimensions: 700 x 750 mm Bale weight: up to 300 kg Dimensions: 3300 x 1235 x 1860 mm (LxWxH) Machine weight: ca. 2500 kg Please note: All technical data refer to information provided by the manufacturer. We assume no liability for the information provided or for any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance payment takes place ex works, without guarantee and guarantee.

Ceetec's new A250 paint machine is here! As an official and exclusive sales partner for the German-speaking region, I am pleased to present our latest model to you. After almost 50 years of construction of the previous model since the beginning of the 1970s (better known as the GORI brush machine), the new model is now an extensive update with extended applications. Who is this machine suitable for? - Carpentry /carpentry that manufactures carports, facades, terraces, garden houses, etc. - Wood industry companies that paint, read or impregnate industrial boards / beams / slabs etc. Technical data: max. workpiece height: 250mm max. workpiece width: 250mm (or 380mm = Ceetec A380) Speed: 16-42m/min Connection: 400V / 1.5kw Benefits ggü. simple spray painting: 1. The wood protection is massaged evenly into all pores, which ensures a high resistance. 2. Different su ...

Electric shrink tunnel 12 Electric thermal tube Electrical: 3 Phase, 24 kWt Weight: 420kg - 3-step heat isolation design for energy saving and operator protection. - Digital control, internal circulation keeps temperature consistent and shrinking effect perfect. - Equipped with high-level VFD(Variable Frequency Drive) that makes controlling of wind speed easy. - Unique wind board design makes controlling of wind direction easy and flexible, able to adapt to different bottles. - Durable electric heater tube ensures efficient heating. - Panel is embedded to prevent operators changing setting accidentally. - Heating can be stopped immediately, or maintained by time

Used cutting system Schmidler S4 Built: 2005r Condition: in operation, very good Technical data The machine has the following equipment: 1. Fully automatic wood conveying with feed roller conveyor and feed and feeding cross conveyor 2. Under-table swivel cross-cut saw with 4-axis control saw blade d=720mm, 3. Universal milling unit 4 -axis, combi cutter 350 diameter,100/20-,40-,60 he combi, finger cutter 40/140, swallowtail cutter 45mm 4. 1x drilling rig (2.2 kW) - drilling direction horizontally 5. 1x slotted unit, sword 10/50/400mm (3.0 kW) - direction of operation horizontal 6. 1x drilling rig (2.2 kW)– drilling direction vertically from below 7. 1x Profiel cutter, d=120mm, L=250mm with dovetail cutter working direction vertically from below 8. Marking device vertical 9. Control board unit, cutter thickness 20mm, 10. Fully automatic beam turning station 11. Tran ...

Cross conveyor 7-stranded or individualized was built and designed as an individual of boards, posts and prisms Mass: Length 6.15 meters Width 1.75 meters Height 1.75 meters Rise angle 62 degrees and 53 degrees 7 strands with associated cross-conveyor elements 1.33 meters long

Spare parts for smooth cutting head board Baader 424 / 429 (Straight Cut Heading Machine Baader 424 / 429). Almost all spare parts are available in stock or at short notice.

Walter WDPP-410 edger – Polish production – DTR, CE TECHNICAL PARAMETERS: min. length of the cut prism 1100 mm max. thickness of the cut prism 120 mm max. input material width 500 mm max. width of the finished board 140 mm min. width of the finished board 70 mm circular saw diameter 425 mm capacity 20 m3 right vertical spindle motor power 5.5 kW left vertical spindle motor power 5.5 kW engine speed (vertical saw drive) 2850 rpm horizontal saw engine power 18 kW engine speed (horizontal saw drive) 2850 rpm feed motor rotational speed 1450 rpm feed speed (smooth regulation) 0/20 m/min mains voltage (50 Hz) 3×400 V machine dimensions (length/width/height) 6900 / 1400 / 1380 mm machine weight 1300 kg

Key data: 100 , 140

Stock No.2452 1 used, partially overhauled and functionally tested pelletizing line Throughput up to 500 kg/h depending on the material, consisting of: Tamping unit Kreyenborg SW 100, drive 7.5 kW Extruder BKG single screw Ø 100 mm – 35 LD, Drive 132 kW – AC frequency controlled Screw speed up to 143 rpm.-1 screw depth 14 mm Heating capacity approx. 35 kW installed 1x athm. Degassing zone Screen-pack-changer Double piston Kreyenborg K-SWE 160 RS back-flush self-cleaning with screen surface 244 cm² BKG underwater pelletizer AH 300, complete with: Start-up valve incl. Hydraulic station Granulator with drive 4 kW Water pump 2.2 kW By-pass system, water tank with heating 9 kW installed and heat exchanger BKG granulate centrifuge TWE 300 with drive 3 kW pellet classifier table Control board and Siemens material feed conveying, big-bag filling station � ...

Control board for Werner & Pfleiderer Rototherm Stikkenofen Type: RZK 128

Fat baking device Esback Köhler 661 101 -Fat baking device with fermentation cabinet -with 1 tipping plank trolley and 10 tipping boards -optional with 2 tipping plank trolleys and 20 tipping boards -380 Volt 50Hz -Fat tubs inner mass: 72x63cm

BRAND: TERRACUBED YEAR: 2022 MODEL: T1000 PRODUCTION HOURS: 250 APPLICATION TYPE: 3D PRINTING LOCATION: LITHUANIA MACHINE TYPE: 3D PRINTER AVAILABILITY: IMMEDIATELY CONTROL UNIT BRAND: DUET3 Technical Information CONTROL UNIT BRAND: DUET3 MODEL: MB6HC Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - BUILD VOLUME: 1X1X1M - PRINT SPEED: UP TO 1M/S - EXTRUDER FLOW: UP TO 3KG/H - LAYER HEIGHT: 0. 5-2MM - NOZZLE: 1MM, 3MM, 5MM (CURRENTLY EQUIPED WITH 3MM ) - CALIBRATION: 3 POINT TRUE BED LEVELING + 100 POINT MESH BED LEVELING - MOTION: TECNIC SERVO MOTORS AND CONTROLLERS EQUIPPED WITH WEB CAMERA FOR REMOTE INSPECTION CONTROLLER WIRELESSLY - ACCURACY: 0,05MM - ANDROID TABLET IS INCLUDED WITH THE PRINTER QUALITATIVE MACHINE BENEFITS: - MAINBOARD IS DUET3 BOARD. IT'S DETAILS ARE AS FOLLOWS: REPRAPFIRMWARE FOR DUET 3 MB6HC FIRMWARE_VERSION: ...

1 of used single-infusion brewery, make DME, capacity 32 HL / 20 BBL. RECENTLY Decommissioned – EXCELLENT condition! Brewhouse Single infusion temperature Mash Vessel with Grist Hydrator, Gas fired kettle and separate whirlpool vessel suitable for whole hops and pellets Grain Handling Floor mounted Grist case with flexible grain elevator leading to Grist hydrator Hot Liquor tank 10,000 litre vertical cylindrical vessel with stainless steel shell, shallow cone top and base. 2 x 18kW electric heating element, temperature pocket. 1.5 inch Tri Clamp outlet, Round Top Manway, all in T304. Free standing on stainless steel legs and feet . Insulated on the shell, clad in fully welded stainless steel 2.160,00 mm Diameter x 4.290,00 mm high Cold liquor tank Size and specification as per the above HLT but with a suitably sized external chilling panels Liquor Blending System Te ...

We supply round and flange ring shears (circular shears) in two sizes - 3/1300 and 5/1800 Our KS circular shears are PLC - controlled hydraulic - electromechanical machines designed for the production of rounds and flanges made of steel sheet, VA stainless steel sheet, Aluminium and non-ferrous metal sheet, maximum shearing performance for sheets with a tensile strength of 400 N/mm2 - 0.5 mm to 3 mm or 0.5 mm to 5 mm, smallest / largest cutable circular board 150 mm / 1,300 mm or 1,800 mm respectively – cutting speed up to 35 m/min, drive power 5 kW or 7.5 kW, weight approx. 2,000 kg and 3,000 kg

PLC - controlled round and flange ring shears (circular scissors) This can also be expanded into a combined circular scissors - flange machine. We supply the machine in semi-automatic design and as a fully automated production island. Rounds and flanges (sheet rings) made of steel sheet, VA stainless steel sheet, aluminium and non-ferrous metal sheet can be cut, maximum shear performance for sheets with a tensile strength of 400 N/mm2 - 0.5 mm to 12 mm, smallest / largest cutable circular board 500 mm to 2,200 mm – cutting speed up to 25 m/min, drive power 15 kW, weight of the base machine

Code: 0232 Brand: ALBERTI V. Model: DOOR / CN - Ce Standard CNC working centre for the complete machining of doors of any size or design - CE Standard The operating head is provided with different working units in order to allow all the door machining in one cycle only (i.e. sizing, squaring, aperture, lock groove, horizontal routings, hinges, anuba, etc.). Technical data: Working area : maximum panel dimensions mm 2500 x 1300 - minimum panel dimensions mm 350 x 140 Maximum panel thickness mm 60 Minimum panel thickness mm 12 N° 3 controlled axis Vertical router Hp 9 - ISO30 connection - rpm 18.000 Horizontal router Hp 4,5 , which can work on all 4 sides Horizontal router for locks Hp 2/3 - rpm 12.000/18.000 Tool stations fitted on the table n° 8 Vacuum pump with double-acting suction cups Working pressure bar 6/8 Suction hoods diameter 80-90 Machine overall dime ...

-Fat baking device from Esback -with fermentation cabinet -with tipping plank trolley incl. 10 tipping boards -with 2 screen carriers incl. manual turn -380 volts

Manufacturer: Xeikon Model: 5000 Year: 2011 Refurbished Equipment: from roll to sheet Defects: Board SPARE PCB MILA2 is broken Availability: In stock Price: on request

automatic baler Manufacturer: UNOTECH Type: UPAMAT 100V 5 Year of construction: 2014 specifications: Cutting force: 1,000 / 315 KN / bar Specific pressing pressure: 12.12 kg/cm² Filling opening 2,000 x 1,020 mm Channel format: 750 x 1,100 mm (H x W) Bale weight: 500 - 800 kg (depending on material and bale length) Binding: 5-fold vertical Drive power: 1 x 75 kW Rated current consumption: 175 A Connection fuse max. 200 A Pump: Internal gear pump Noise emission: 82 - 85 dB/A Machine weight: 32.000 kg Control: Siemens S7 - IM-151 Capacity: approx. 340 m²/hour under operating conditions Throughput: at 30 kg/m³ bulk density approx. 10.0 t/h at 50 kg/m³ bulk density approx. 16.0 t/h at 100 kg/m³ bulk density approx. 32.0 t/h Equipped with: Press box planked with HARDOX central lubrication point Large digit displ ...

Manufacturer: Xeikon Model: 5000 Year: 2011 Refurbished Equipment: from roll to sheet Defects: Board SPARE PCB MILA2 is broken Availability: In stock Price: on request

1 POLYTEX pinking machine type ZH (Zigzag cutting) knife width 500 mm, serrated knife, stroke 50 mm, table size 505 x 945 mm, power driven swatch and sample cutting machine, precise and accurate thanks to right angle guide with millimeter graduation, exchange of knife is effortless and fast, motor 0,37 kW machine delivered with 2 new cutting boards (one to be used and one as spare)

High-quality, PLC-controlled circular shears / circular, blank and flange ring shears with punching device used - refurbished PLC – Control for 120 cutting programs with 30 program sets each Projection in tailstock 1,000 mm Automatic tailstock clamping Outreach in the shear station 400 mm Shear performance 0.5 to 5 mm sheet steel 400 N/mm² 0.5 to 3 mm stainless steel sheet 650 N/mm² Largest shearable disc diameter Ø 1,400 mm for rectangular starting material Ø 1,800 mm for octagonal starting material Smallest shear diameter 150 mm Diameter Ø shear knife 100 mm Shear rate up to 35 m/min punching diameter at S = 2 mm sheet steel 400 N/mm² - Ø 25 mm at S = 3 mm sheet steel 400 N/mm² - Ø 17 mm Drive power 7 KW Weight 1.300 kg Dimensions 2.7 x 1.8 m x H 1.7 m Optionally available with a flanging device – Maximum board height 20 mm Large ...

SKM-PD1222 technical parameters Feeding : Automatic Vacuum Feeder antistatic system for corrugated board 6 printing units / 5 with squeegee beams 1 with rubber roller Each printing unit has a ceramic anilox roller Dryer: Infrared Details: Bosch Rexroth controllers with servo drives . 11 pieces of servo drives Each printing unit has a vacuum arc transport. Maximum mechanical speed: 130 pieces /min Ideal speed: 120 pieces /min Printing speed: 70-90 pieces /min Max sheet size: 1200mmx2400mmx12mm Min. sheet size: 320x650x1,5mm Max pressure dimension: 1150mmx2200mm Control system: Siemes Weight: 50 t Dimensions: 22m x 4.85m x 2.8m

Used cutting machine Hundegger K2 machining width 1250mm Manufacturer: Hundegger, DE Type: K2i - 5 1250mm Built: 2009 Condition: used, in operation, very good Consisting of: 1. Fully automatic wood conveying with feed roller conveyor and feed and feeding cross conveyor Consisting of a roller conveyor with cross-over from the cross conveyor with 5 strands equipped with hinge tape chains, which ensure injury-free transport Length: 9.2 m, Width: 2.2 m 2. Lower table swivel crosscut saw with 4-axis control With a carbide saw blade of 900 mm (11.0 KW) max. saw cutting depth: 300mm at 90° infinitely adjustable machining stroke with positioning drive pivotable 0- 360°, inclination 0-65°, drive servo-hydraulic, With this aggregate, all saw cuts, such as angles and shitging sections, longitudinal sections for burring and lruning, hewing or stash sections) are executed.  ...

Used cutting machine Hundegger K2 -5 machining width 625mm Manufacturer: Hundegger, DE Type: K2 - 5, 625mm Built: 2006 Condition: used, in operation, very good Consisting of: 1. Fully automatic wood conveying with feed roller conveyor and feed and feeding cross conveyor Consisting of a roller conveyor with cross-over from the cross conveyor with 5 strands equipped with hinge tape chains, which ensure injury-free transport Length: 9.2 m, Width: 2.2 m 2. Lower table swivel crosscut saw with 4-axis control With a carbide saw blade of 900 mm (11.0 KW) max. saw cutting depth: 300mm at 90° infinitely adjustable machining stroke with positioning drive pivotable 0- 360°, inclination 0-65°, drive servo-hydraulic, With this aggregate, all saw cuts, such as angles and shitging sections, longitudinal sections for burring and lruning, hewing or stash sections) are executed ...

Finger jointing lines >Wood input lengths 900-6100 mm < >Wood rests the tools move < >availability very high < The only package system in the world that can also process a single board or individual beams. Finger jointing line for vertical and horizontal milling, tine profiles, together with new developments in the clamping stations and the transfer channel on the milling carriage, the MINDA MACH I has the following groundbreaking advantages, high cycle rate, together with 1200 mm milling channel at 40 mm wood thickness running meter capacity approx. 150 running meters / min, very reliable material transport - no fault-prone conveyor rollers, flaps and cross conveyor sections - very high availability - for all cross-sections incl. square suitable - through fully automatic, continuous channel adaptation, single wood milling is possible in extreme cases - this makes the system extremely ...

HB QUICKMASTER 46-2 FOR SPARE PARTS M. No.: 964301 Format (cm): 34x46 Condition: Not in operation (central electronic board) // All other machine parts are in good working condition

• Bandwidth / strip width: 1,600 mm • Strip thickness / strip thickness: 0.4 - 2.0 mm • Coil inner / coil inner-a:390-420 mm • Coil outer / coil outer-a: 1,500 mm • Spreading/ spreading: hydraulic/hydraulic • Motor drive AC servo cooling • For invertrers • Speed: 15 m/min. • Attachment segments for 500 mm • Reel shift: 200 mm • Working method: from top and bottom • Hydraulic valves on board

Strip thickness / strip thickness: 3 - 4 mm Coil weight max.: 10,000 kg Coil inner diameter/coil inner-dia.: 508 mm Coil outer diameter / coil outer-dia.: .700 mm Thorn width / mandrel width: 1,650 mm Low-return / pressure arm Separierarm / separating arm Hydr. Spread / hydr. Spreading Working dircetion: right/left; Right/left On board hydraulic pipes 24 VGS or 110 V, 50 Hz. On board hydraulic piping 24 V DC or 110 V, 50 Hz.

This robust baler is ideal for pressing paper waste from small and medium-sized printers and bookbinding companies. It can be filled manually or automatically, and pressing is also done automatically or manually. Pressure 14 Mp = 137 KN Engine power 1.5 kW at 380 V / 50Hz Bale size approx. 600 x 600 mm

Machine for the postforming of laminate on rounded boards Usefull length: 4200 mm Panel width: 200 - 1300 mm Laminate heating by infrared beam Bending process by jig that is pneumatically loaded

Brettbesäumer Autojet used Cutting heights 18 - 100 mm, 3 variable axes – 2 variable stems – Re./Li. Additional bushing. Build 3/94 - New laser measurement with PC/software/PC cabinet from Installation 5/2007 A cost-effective solution for a fast trimming machine with modern laser measurement. - Continuous capping with length stops for the cap lengths - Zero cross-cut saw - Addition of swivel saw for tip capping on the opposite side. The waste is disposed of. -Transverse measuring conveyor The boards are conveyed by a measurement curtain in transverse passage. -Laser measurement State-of-the-art surveying with 15 lasers from above. Of course, programs can be stored in all variety, depending on length and width, separation, sharp-edged or forest edge can be mapped in many ways in the program. - Alignment table A computer calculates the ideal orientation of the boa ...

Creasing machine for board Krasue Model Creasing machine Creasing length 100 cm Creasing depth adjustable/variable Creasing span adjustable-variable Creasing thickness possible up to 4 mm board Details will be equipped with motor and start-stop circuit after order, extremely heavy duty machine, built to last for many years to come Available Direct

Warehouse No. 8725 Multi-blade saw Paul BK 34/800 Complete cutting system with cross-cut saw Paul GE 20, Cutting saw Paul BK 34/800, multi-blade saw BK 34/800 -Chain conveyor with lifting platform -Cross-cut saw Paul, Type 20 E, YOC 92, 14 kW -Roller conveyor -Conveyor with shortage roller -Ejection station for cuts -Roller conveyor with centering -Separation saw Paul, type BK 34/800, YOC 92, 25 kW -Transverse survey Paul Type AKA, YOC 92 -Frequent leaf saw Paul Type BK 34/800, YOC 92, 75 kW -Security channel -Sorting belt for manual sorting -Stacking system Hydraulic pump 11 kW and miscellaneous 15 kW The system is fully functional, including control cabinets, saw shafts, intermediate rings, saws and documentation. Hardwood with the following data is processed on the plant: Wood thickness: 26 mm – 42 mm Input lengths on the cross-cut saw: 2500 – 5000 mm ...

Code: 0003 Brand: BOTTENE Model: PUSH 100 - CE Standard Computer-operated automatic crosscutting machine with pusher for cutting of wooden boards - CE Standard The board fed in is analysed by the pusher and the data processed by the computer, which optimises the length according to different criteria chosen by the user. The boards are fed in by a pusher controlled by a brushless motor. The blade is driven by a motor and pneumatic cylinder located under the machine base. Blade diameter min/max mm 400/550 F30 Blade speed rpm 2800 Cutting capacity: with blade mm 450 mm 300 x 120 - with blade mm 550 mm 350 x 150 Blade motor Hp 5,5 Pusher stroke mm 5000 Max table load length mm 4100 Positioning speed 65 mt/min Working table height mm 915 Unloading table with side ejectors Suction inlet diameter mm 120 Overall dimensions of assembled machine: mm 9900 x 1850 x 1550 h Over ...

X-axis stroke 8,000 mm Y-axis stroke 1,000 mm Z-axis stroke 2,000 mm ISO 50 spindle cone Front bearing spindle diameter 100 mm Total table top 1,000x10,000 mm Maximum workpiece weight per 1m board length 2,500 kg Nominal main propulsion power 22 kW Spindle rpm range - continuous 11-2,500 per minute

Digital scale,stainless steel,Sartorius type 3808 MP,30 kg,weighing board 300 x 400 mm

Machine is offered with sets of rollers and die cutters . It is year 2005 and very good working condition. For more info do not hesitate to contact me. Print width maximum: 420mm Max unwind reel diameter: 1000 mm Diameter of the unwind shaft: 76 mm or 152 mm Max rewind diameter on the output shaft: 700 mm Diameter of the rewind shaft: 76 mm or 152 mm Printable Material (thickness) BOPP min 15my max 200 my PAPER min 60gsm max 200gsm SUPPORTED WEB min 100gsm max 250gsm BOARD min 100gsm max 350gsm Alluminum from 12 my to 50 my Ink Type: UV Plate Thickness: 1.14 mm Stycky Back Thickness: 0.38 mm Включва: Конвейр за листи - 1 бр. KONGSKILDE MULTIAIR 2000 - 1 бр. Система за обработка на отпадък

Ø board: 1250 mm Maximum turnerable: 1500 mm Useful height: 1355 mm Vertical crossbar stroke: 800 mm Ram vertical stroke: 1000 mm Toolholder number: 15 Table pruned: 12000 kg CNC Tesla NS 642 C Fast: 8 m/min Power: 40 kW Weight: 27.2 ton

grinding length: 1000 mm grinding width: 600 mm workpiece height: 450 mm Control: Fanuc 210i - M total power requirement: 20 kW weight of the machine ca.: 5,5 t dimensions of the machine ca.: 3950 x 3150 x 2550 mm CNC surface grinding machine Clamping area of the table 1000 x 500 mm Clamping surface for magnetic particle board 1000 x 500 mm Largest grinding surface: L x W x H 1000 x 600 x 450 mm Largest distance from table to spindle center 650 mm Table speed in the longitudinal direction 1 - 30 m / min Max. Table load 1500 kg Grinding wheel: diameter x width x bore 400 x 50 x Ø 127 mm Grinding spindle drive 7.5 kW Spindle speed 1500 rpm Connected load 20 kW Space required L x W x H 3950 x 3150 x 2550 mm Weight 5500 kg Equipment CNC control Fanuc 210i - M Electro magnetic plate 1000 x 500 mm Coolant device with paper filter Several Grinding wheels with flanges Digital display Condition  ...

RANDEK SP700 Cross-cut saw Production: Randek, Sweden Year of construction: 1989 in good condition, cleaned and checked Randek's SP700 series is a reliable saw designed for manufacturers of roof trusses. Manufacturer of roof trusses and houses all over the world. The SP700 saw is effective, easy to use and accurate. She has been on the market for a long time. has been on the market for a long time and is constantly in close contact with our customers many customers. The saw blade of this semi-automatic saw supports oblique cuts, that is, it can make all the cuts you need. The large saw blade diameter (700 mm) also allows you to make several sections of woodpiles to cut at the same time. - Bevel cuts from 0° to 360° - Cutting heights up to 250 mm, three boards can be cut per cutting cycle - PLC programmable saw - Fixation of the wood near the cutting area for a precis ...

Ø board: 1,800 mm Maximum working ø: 2,000 mm Max. Turning height: 1,250 mm Max. weight on the table: 15 tons X-axis: 2700 mm Z-axis: 1200 mm Axis C 360 ° Table speed: 3 - 300 rpm Board engine: 60 kw RAM: 250 x 300 mm Work progress: 0 - 2000 mm/min. Nc: FANUC 15 T SERIES ATC: 50 ISO 50 tools Total weight: 58 ton

RANDEK SP700 Cross-cut saw Production: Randek, Sweden Year of construction: 1990 in good condition Randek's SP700 series is a reliable saw designed for manufacturers of roof trusses. Manufacturer of roof trusses and houses all over the world. The SP700 saw is effective, easy to use and accurate. She has been on the market for a long time. has been on the market for a long time and is constantly in close contact with our customers many customers. The saw blade of this semi-automatic saw supports oblique cuts, that is, it can make all the cuts you need. The large saw blade diameter (700 mm) also allows you to make several sections of woodpiles to cut at the same time. - Bevel cuts from 0° to 360° - Cutting heights up to 250 mm, three boards can be cut per cutting cycle - PLC programmable saw - Fixation of the wood near the cutting area for a precise cut Roller conve ...