blown film line used for sale

Used machine DMU 40eVo linear Machine Type: CNC 5-Axis Milling Center Model: DMU 40eVo linear Manufacturer: DMGMORI Control:CELOS Siemens 840D sl Operate Year of Make: 2022 #001431 Location: Germany Technical data Travel range X-axis approx. 400 mm Y-axis approx. 400 mm Z-axis approx. 375 mm C-axis 360° B-axis -5/+110 ° Workpiece diameter approx. 450 mm Workpiece weight max. approx. 250 kg Speed max. approx. 20,000 rpm Spindle motor approx. 35/25 KW Number of tool positions approx. 120 Rapid traverse approx. 80 m/min Pick-up taper approx. HSK63 Additional axles approx. 2 4th/5th Compressed air bar,L/min approx. 5, 300 bar,L/min Power consumption approx. 32 kVA Footprint L x W x H approx. 2.05x2.85x2.53 m (without pallet pool) Machine weight approx. 7,500 kg Facilities Dynamic Package for DMU 40 eVo linear - Motor Spindle speedMASTER® HSK-A63 RPM 20-20,0 ...

The machine is in good technical condition; testing is possible by prior arrangement. A probe is included.

Horizon VAC 100 Booklet maker Line with Pressing Unit Age: 2000-2007 Format: 35 x 50 cm Equipment: Hohner stitching heads 1x VAC 100-a Air suction collator (2000) 1x SPF 20A Stitching and Folding unit (2007) 1x Desta BAS 500-16 Booklet pressing Unit (2001) 1x FC-20 Fore Edge Trimmer (2007) Machine in good condition

Horizon VAC 100 Booklet maker Line 20 stations Age: 2000 Format: 35 x 50 cm Equipment: Hohner stitching heads 1x VAC 100-a Air suction collator 1x Vac 100-c Air suction collator 1x ST-40 Stacker Receiving Tray 1x SPF 20 Stitching and Folding unit 1x FC-20 Fore Edge Trimmer 1x PK-20 Preset Kicker 1x LC-20 Long Conveyor 1x PJ-77 Jogger Receiving Tray Machine in good condition

GeneralPrecision centre - Linear drive package - Active cooling for spindle, linear drives and electrical cabinet - Frame temperatur control - Direct measuring system - Chiptray, coolant/airblast changing - Full cabin including 2nd door; Control: 3D-Control Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical1-80000/1-80000/1-80000 mm/minSpindle taperHSK-A 63 Rapid traverse longitudinal/transverse/vertical80/80/80 m/minWorking area 1Longitudinal650 mmCross600 mmVertical450 mmTool changerType of magazineChain Number of tools30 Type of gripperDouble gripper Floor space/WeightDimensions (L x W x H)2,92 x 2,42 x 2,88 (3,0) mWeight approx.9600 KgHSC70 5-Axis SpecificationHSC70 with 5-Axis specification clamping area Ø 600 mm // Ø 23.61 inch swivel range B-axis +20/-110°; C-axis 360° table load max. 500 kg // 1102.31 lbs absolute measuring systems incl. permanent co ...

General SKU328Y697 LocationBarneveld MakeEstrella AG No.91985 Pressure Working pressure6 Bar Number of horizontal pressure tanks1 Main Features MaterialGlass Volume4000 Ltr. Pressure6 Bar Specified Features - Pressure vessel Capacity4425 l., (4000 l.) Vessel sizesDia. 1350x3200 mm ManholeDN600 Top connectionscheck Max. temperature-10°C/+200°C MaterialGlass - Enamel (TPE-2000) General Year of construction1991 Mounted on consolescheck Floorspace1,35x3,20 m Weight2000 kgPressure vesselsGeneric medicinesFine chemicalsOther chemicalRubberBiotechnologyPlastic & polymersCatalysts & fillersOther pharmaceuticsCosmeticsAnimal feedAPIEstrellaTanks > Pressure vesselsIndustries > Pharmaceutical > Generic medicinesIndustries > Chemical > Fine chemicalsIndustries > Chemical > Other chemicalIndustries > Chemical > RubberIndustries > Chemical > BiotechnologyIndustries > Chemical ...

Schneidmaschine - Guillotine Schneider Senator SEN78 E-LINE Year 2000 - Serial-No. M-078E-004-10/30-09 Schnittbreite max. 780mm / Cutting width max. 780mm Programm - Duisplay / Program - Display Lufttisch - Chromtisch / Light guard - chrome table CE-Zeichen-Zulassung / CE Certificate Elektr. Anschluss / Power supply 3 Phase 380V - 10A Ersatzmesser / Spare knives

Semi-rotary die-cutting unit Brand: PROFILINE Model: Profi-Line R-320 Year : 2016 Speed: 90 m/min WINK cylinder is brand new and unused

Incl. chip conveyor, incl. 3-D touch probe and incl. the tool holders located in the tool changer! Attention: without the machine vises seen in the photos! Attention: the machine can be transported on a standard truck!

Year of construction: 2011 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 500 Y-axis travel mm: 450 Z-axis travel mm: 400 C-axis degrees: 360º (0,001) B-axis degrees: 0º/108º (0,001) Rapid traverse m/min: 80/50/50 Milling/turning table nc: Table dimensions mm: Ø390 Maximum workpiece size (D x H) mm: Ø630x500 Max. workpiece weight kg: 200 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/87 Tool system Tool holder: HSK-A 63 Tool magazine slots: 30 With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Chip-to-chip time s: 5 Equipment Chip conveyor Infrared probe Rinsing gun blowing air through spindle center selectable via M-function Signal lamp Laser tool measurement for measuring tool length and diameter Programmable coolant nozzles Heat compe ...

Impressions=0 m, Condition= Very Good , Availability= 2026-09-19, Polar 137 autotrim from 2000 , no 7093536 Pile lift , Polar Jogger Polar Trensumat TR 130EL -4 Extra knife Comperessor Top machine in good working condition

Year of construction: 2010 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 500 Y-axis travel mm: 450 Z-axis travel mm: 400 C-axis degrees: 360º (0,001) B-axis degrees: 0º/108º (0,001) Rapid traverse m/min: 80/50/50 Milling/turning table nc: Table dimensions mm: Ø390 Maximum workpiece size (D x H) mm: Ø630x500 Max. workpiece weight kg: 200 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/87 Tool system Tool holder: HSK-A 63 Tool magazine slots: 30 With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Chip-to-chip time s: 5 Equipment Chip conveyor Infrared probe Rinsing gun blowing air through spindle center selectable via M-function Signal lamp Laser tool measurement for measuring tool length and diameter Programmable coolant nozzles Heat comp ...

CATEGORY - 5-Axis BRAND - DMG MORI MODEL - DMU 60 EVO LINEAR WAREHOUSE NO - Z100000517 YEAR OF MANUFACTURE - 2012 CONTROL UNIT - SIEMENS AXIS TRAVELS - X 600 MM / H 500 MM / Z 500 MM ROTARY AXIS TRAVELS - B -5° / +110° / C 360° SPINDEL SPEED - 18.000 MIN/-1 HOLDER TYPE - HSK-A 63 TABLE SIZE - D 600 X 500 MM WORKPIECE WEIGHT (MAX) - 400 KG NUMBER OF PALLETS - 2 PALLETS MACHINE WEIGHT - 12.000 KG MACHINE EXTERNAL DIMENSIONS - 2.80 X 3.25 X 2.78 M

From a current recycling we offer you OBJECT. Year of construction 2023 Condition: good (cleaning already ordered) Original price: EUR 25.600,00 Asset Manager: Monika Stüker Phone: +49 (0) 172 2796951 Mail: m.stuekerakf.de We will be happy to provide you with details upon request. Location: 34434 Borgentreich The sale is without warranty Subject to prior sale

Key data: 685 mm, 635 mm

Circumference over bed 685 mm Turning diameter over carriage 465 mm Turning length 635 mm Speed range 5000 rpm Drive power 100/40% 25 /37 KW Weight 6500 KG CNC HEIDENHAIN Pilot BERG Chuck 12-fold SAUTER revolver VDI 40 m. WZ Tailstock hydraulic Chip conveyor 25 steel holders 8 drill rod holders 10 antr. Holder axisl u.radial

General SKU328Y707 LocationBarneveld MakeEstrella TypeST.EM No.91980 Pressure Working pressure6 Bar Number of horizontal pressure tanks1 Main Features MaterialGlass Volume2830 Ltr. Pressure6 Bar Specified Features - Pressure vessel Capacity2830 l Vessel sizesDia. 1200x2600 mm ManholeDN600 Top connectionscheck OutletDN50 Max. temperature-10°C/+200°C MaterialGlass - Enamel (TPE-2000) General Year of construction1991 Floorspace1,20 x 2,80 m Total height1,80 m Weight1550 kgPressure vesselsGeneric medicinesFine chemicalsOther chemicalRubberBiotechnologyPlastic & polymersCatalysts & fillersOther pharmaceuticsCosmeticsAnimal feedAPIEstrellaTanks > Pressure vesselsIndustries > Pharmaceutical > Generic medicinesIndustries > Chemical > Fine chemicalsIndustries > Chemical > Other chemicalIndustries > Chemical > RubberIndustries > Chemical > BiotechnologyIndustries > Chem ...

General SKU328Y708 LocationBarneveld MakeEstrella TypeST.EM No.87497 Pressure Working pressure6 Bar Number of vertical pressure tanks1 Main Features MaterialGlass Volume4210 Ltr. Pressure6 Bar Specified Features - Pressure vessel Capacity4210 l Vessel sizesDia. 1600x2200 mm Dished bottomcheck ManholeDN600 Top connectionscheck OutletDN70 Max. temperature-10°c/+200°C MaterialGlass - Enamel General Year of construction1987 Mounted on legscheck Floorspace1,60 x 1,60 m Total height3,80 m Weight2000Pressure vesselsGeneric medicinesFine chemicalsOther chemicalRubberBiotechnologyPlastic & polymersCatalysts & fillersOther pharmaceuticsCosmeticsAnimal feedAPIEstrellaTanks > Pressure vesselsIndustries > Pharmaceutical > Generic medicinesIndustries > Chemical > Fine chemicalsIndustries > Chemical > Other chemicalIndustries > Chemical > RubberIndustries > Chemical > Biot ...

General SKU328Y709 LocationBarneveld MakeEstrella TypeST.EM No.91989 Pressure Working pressure6 Bar Number of vertical pressure tanks1 Main Features MaterialGlass Volume4210 Ltr. Pressure6 Bar Specified Features - Pressure vessel Capacity4210 l Vessel sizesDia. 1500x2200 mm Dished bottomcheck ManholeDN550 Top connectionscheck OutletDN80 Max. temperature-10°C/+200°C MaterialGlass - Enamel General Year of construction1991 Mounted on legscheck Floorspace1,60 x 1,60 m Total height3,00 m Weight1900 Extra information - with CIP line (Hastelloy C-22) Pressure vesselsGeneric medicinesFine chemicalsOther chemicalRubberBiotechnologyPlastic & polymersCatalysts & fillersOther pharmaceuticsCosmeticsAnimal feedAPIEstrellaTanks > Pressure vesselsIndustries > Pharmaceutical > Generic medicinesIndustries > Chemical > Fine chemicalsIndustries > Chemical > Other chemicalIndu ...

General SKU328Y712 LocationBarneveld MakeEstrella TypeST.EM No.91979 Pressure Working pressure6 Bar Number of horizontal pressure tanks1 Main Features MaterialGlass Volume2830 Ltr. Pressure6 Bar Specified Features - Pressure vessel Capacity2830 l Vessel sizesDia. 1200x2600 mm ManholeDN600 Top connectionsDN50, DN100, DN125 OutletDN100 Max. temperature-10°C/+200°C MaterialGlass - Enamel (TPE-2000) General Year of construction1991 Floorspace1,20 x 2,80 m Total height1,80 m Weight1550 kgPressure vesselsGeneric medicinesFine chemicalsOther chemicalRubberBiotechnologyPlastic & polymersCatalysts & fillersOther pharmaceuticsCosmeticsAnimal feedAPIEstrellaTanks > Pressure vesselsIndustries > Pharmaceutical > Generic medicinesIndustries > Chemical > Fine chemicalsIndustries > Chemical > Other chemicalIndustries > Chemical > RubberIndustries > Chemical > BiotechnologyInd ...

General SKU328Y718 LocationBarneveld MakeTycon Type1020 l No.3494 Pressure Working pressure2 Bar Vacuum possiblecheck Number of horizontal pressure tanks1 Main Features MaterialGlass Volume1020 Ltr. Pressure2 Bar Vacuumcheck Specified Features - Pressure vessel Capacity1020 l Vessel sizesDia. 800x2350 mm ManholeDN450 Top connectionscheck OutletDN100 Max. temperature-10°C/+200°C MaterialGlass - Enamel General Year of construction1987 Floorspace0,80 x 2,50 m Total height1,00 m Weight720 kgPressure vesselsGeneric medicinesFine chemicalsOther chemicalRubberBiotechnologyPlastic & polymersCatalysts & fillersOther pharmaceuticsCosmeticsAnimal feedAPITycon ItalyTanks > Pressure vesselsIndustries > Pharmaceutical > Generic medicinesIndustries > Chemical > Fine chemicalsIndustries > Chemical > Other chemicalIndustries > Chemical > RubberIndustries > Chemical > Biotech ...

Key data: 1040 mm, 600 mm, 500 mm

CNC Vertical Machining Center DECKEL MAHO DMC 104 V linear With track control Heidenhain iTNC 530 Year of Make: 2005 Travel: X 1040 Y 600 Z 500 Speed range: 0 – 12,000 rpm infinitely variable With the following accessories: Rigid angle table 850 mm x 600 mm clamping surface Vertical tool changer with 30 magazine positions ( SK 40 ) NC Dividing head with tailstock Electronic handwheel Full protection cabin with sliding doors and interior lighting Operating mode 3 + 4 IKZ 40 bar Chip conveyor Rotoclear Swarf Spray Gun Spiral chip auger Coolant Setup 3 Height Adjustable Machine Shoes Operating instructions

GeneralUniversal machining centre New DMG MORI Design; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical50000/50000/50000 mm/minRapid traverse longitudinal/transverse/vertical50/50/50 m/minWorking area 1Longitudinal400 mmCross400 mmVertical375 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools60 Max. tool weight6 KgMax. tool length300 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets130 mmFloor space/WeightDimensions (L x W x H)6,21 x 6,58 x 2,69 (6,21 x 7,38 x 2,69) mWeight approx.7200 KgDie and Mold Package linearDie and Mold Package linear Dynamic package V-type Eagle timing belt for Z axis Package Mill / TurnPackage Mill / Turn (only available for Siemens 840D solutionline) NC-Mill-turn table 450x450 mm / 17.7x17.7 in rounded down to d460 mm / 18.1 in  ...

GeneralHSC-Precision Centre - Active chiller for main spindle and linear drives - Active chiller for electrical cabinet - Direct absolute measuring system with air purge - Coolant-airblast changeover - MPC (Machine Protection Control); Control: 3D-control Heidenhain iTNC 530 HSCI Technical DataSpindle taperHSK-E 50 Feed rate longitudinal/transverse/vertical1-80000/1-80000/1-80000 mm/minRapid traverse longitudinal/transverse/vertical80/80/80 m/minWorking area 1Longitudinal450 mmCross580 mmVertical460 mmTool changerApplicationVertical Type of magazineChain Type of gripperDouble gripper Number of tools30 Rigid tableRigid table, clamping area 460 x 600 mm / 18,11 x 23,62 inch Loading weight max. 600 kg / 1322 lbs Spindle speed up to 40,000rpm with Shaft CoolingSpindle speed 20 up to 40,000 rpm within shaft cooling for tool taper HSK-E50 DIN 69893 AC-Main drive with 19,5/15 kW (100/40%DC) 14, ...

GeneralVertical Machining Centre; Control: 3D control Heidenhain iTNC 530 Technical DataFeed rate longitudinal/transverse/vertical1-90000/1-90000/1-90000 mm/minRapid traverse longitudinal/transverse/vertical90/90/90 m/minWorking area 1Longitudinal885 mmCross600 mmVertical600 mmMiscellaneousClamping SystemHSK-A 63 Colour Floor space/WeightDimensions (L x W x H)4,9 x 4,3 x 3,2 mWeight approx.12000 KgCabineFull protection cabin DMC 75 V linear in 5-axes-versionAdditional price DMC 75V linear in 5-axes-version - motion in X=885mm und Z=600mm - spindle speed up to 18.000rpm, - tool-taper HSK-A 63, - swiveling range B-axis +10° to -110°, - swiveling speed B-axis 50rpm, - max. torque 750Nm / 553ft/lbs - clampi Tool magazine 150 pocketsTool magazine 150 pockets Tower type magazine Only available for HSK Tool holders. (differently from standard) Number of tools 150 Preparation measuring probe T ...

GeneralPrecision centre - Linear drive package - Active cooling for spindle, linear drives and electrical cabinet - Frame temperatur control - Direct measuring system - Chiptray, coolant/airblast changing - Full cabin including 2nd door; Control: 3D-control Siemens 840D sl Operate Technical DataSpindle taperHSK-A 63 Feed rate longitudinal/transverse/vertical1-80000/1-80000/1-80000 mm/minRapid traverse longitudinal/transverse/vertical80/80/80 m/minWorking area 1Longitudinal650 mmCross600 mmVertical380 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools120 Floor space/WeightDimensions (L x W x H)7,28 x 6,63 x 3 mWeight approx.9600 KgRigid tableRigid table clamping area 850 x 600 mm // 33,46 x 23,62 inch loading weight max. 700 kg // 1543,23 lbs Spindle speed up to 28,000rpm Shaft CoolingSpindle speed 20 up to 28,000 rpm within shaft cooling inclusive MPC Mach ...

GeneralHorizontal machining centre - Horizontal milling head; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical60000/60000/70000 mm/minRapid traverse longitudinal/transverse/vertical60/60/70 m/minWorking area 1Longitudinal800 mmCross1050 mmVertical900 mmCabineFull protection cabin Direct measuring systemDirect path measuring system NC rotary table with pallet changerType of Measuring system Direct measuring system Table surface 630 x 630 mmCentre bore 50 mmMaximum load (table centre) 900 KgSlot width 14 mmNumber of Slots 5 Distance between T-Slots 100 mmRotation speed max.4. Axis 40 rpm4. Axes (swivelling range) 360 x 0,001 degreePackage recirculation ballscrew spindlePackage recirculating ballscrew spindle X-,Z-axis:max. feed speed: 60.000 mm/min Y-axis: max. feed speed: 70.000 mm/min (basic machine without linear drive X-, Y-, Z-axis)  ...

GeneralCNC Swiss type lathe with Fanuc control; Control: FANUC 310 iTB Working areaTurning diameter33 mmDrive for support for back workingDrive for support for back working operation (slide 2) power 0.55/1.1 KW Special equipment-Chip convoyer with discharge height 1200 mm Special equipmentRMS-Sensor Special equipment-Self-regulating double-cone guide bushing -600 l cooling system. 8 and 20 bar pump, paper belt filter - IEMCA Boss 545/32 e automatic bar feeder, max. length 3200 mm.

BAZ DMG Deckel V75linear (ca.16000 spindle hours) BJ 2005

ROSA LINEA IRON 08.6 N ist eine CNC Flachschleifmaschine, entwickelt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Tisch 800×400 mm; Hub X 950 mm, Z 550 mm; Schleiflänge 850 mm, Breite 630 mm; Traglast 1000 kg; Schleifscheibe Ø400×80 mm, Bohrung 127 mm. Drehzahl Scheibe 1500 t/min; Tischgeschwindigkeit 1–38 m/min; automatischer Quervorschub stufenlos 1–8 m/min; Anschluss 3×400 V 50 Hz; Gewicht ~6000 kg; Abmessungen 3600×2200×2300 mm. Erreicht enge Toleranzen, geeignet für Automotive, Werkzeugbau, Luftfahrt, Medizintechnik, Uhrenindustrie. Technische Daten ohne Gewähr

Schmedt hardcover book production line - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Schmedt hardcover book production line Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers and Lifts Laminators Offset printing machinery Others Packaging machines Paper drills Perfect binders Pile turners Spare parts Stitching machines Schmedt hardcover book production line Price: 95000 EUR Download PDF Schmedt hardcover book production line The machines are in very good condition and have seen little use. The set consists of the following machines: – Schmedt PraLeg book block casing-in machine – Schmedt PraForm Pro book press and joint-forming machine – Schmedt SC-3 Autocase cover assembly table – Schmedt PraziC ...

This 3-axis DMG DECKEL MAHO DMU 105 V Linear was manufactured in 2004. It features a robust CNC control system, HEIDENHAIN iTNC 530, and has a machine weight of approximately 12,200 kg. The required installation space is 5,700 × 4,700 mm, making it suitable for various machining tasks. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMU 105 V Linear vertical machining centre we have for sale. Contact us for further details.

Key data: 640 mm, 600 mm, 500 mm

Spindle speed: 12,000 min/1 Spindle hours: 21600h Control: Siemens Year of Make: 2004 3D Buttons Tool holder SK40 30 tool positions

CNC lathe GILDEMEISTER CTX 420 linear With control Heidenhain ELTROPILOT 4290 Year of Make: 2003 Max. rotatable diameter: 324 mm Max. rotatable length: 600 mm Max. circumferential diameter: 680 mm Spindle bore: 79 mm Max. spindle speed: 4500 rpm With the following accessories: Slide protection with interior lighting 12-speed revolver Various tool holders VDI 40 Tailstock with quill Chip conveyor Hydraulic jaw chuck SMW Autoblok 0 250 mm Foot switch for jaw chuck + tailstock adjustment Oil mist extraction Coolant Setup Operating Instructions

Key data: 640 mm, 640 mm, 640 mm

Vertical machining center Travel x/ y/ z = 640/640/640 mm Work table 850 x 600 mm Rapid traverse x/y/z 70/ 40/ 40 m/min Spindle speed up to 12,000 1/min Motor power 40/100 % 19/ 13 KW Torque 40/100 % 100/ 70 Nm Tool magazine 30-fold Tool holder SK 40 - Coolant system - Chip conveyors - Internal coolant supply - CNC control Heidenhain iTNC530

Key data: 500 mm, 1000 mm, 2500 1/min

Control: Name: Siemens 840 D Travels: x-travel: 382 mm // z-travel: 1080 mm Technical data: • Speed range 20-2500 rpm • Turning diameter 500/600 mm • Turning length 1000 mm • Spindle bore 136 mm • Rod diameter 121 mm • Torque 2200 Nm • Automatic hydraulic bezel • 12-fold tool turret

General SKU331Y747 LocationBarneveld CEcheck MakeDe Dietrich Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket30 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume100 Ltr. Motor0.75 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity100 l Vessel sizesDia. 700x500 mm Dished bottomcheck ManholeCover Top connectionscheck OutletDN80 with valve With jacketcheck Max. temperature-25°C/+200°C With propellor stirrercheck Motor0,75 kW (400 V, 1410 rpm, (Ex)) Speed mixing shaft185 rpm With jacketcheck Glass Reactors MaterialGlass - Enamel (3009) General TypeAE100 No.68438 Year of construction2007 Mounted on legscheck With switchgearcheck Floorspace0,90 x 0,90 m Total height2,60 m Weight550 kgGeneric medicinesOintmentsFine chemicalsOther chemicalGlass-lined ReactorsBiotechnologyOther pharmaceuticsCosmeti ...

General SKU331Y748 LocationBarneveld CEcheck MakeDe Dietrich Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket10 Bar Main Features MaterialGlass Volume400 Ltr. Motor1.5 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity400 l (444 l) Vessel sizesø 780 x 1000 mm Dished bottomcheck ManholeCover Top connectionscheck OutletDN 100 with valve With jacketvolume 120 l Max. temperature-25°C/ +170°C, jacket +200°C With propellor stirrercheck Motor1,5 kW (380 V, 1400 rpm (Ex)) Speed mixing shaft140 rpm With jacketcheck Glass Reactors MaterialGlass - Enamel (3009U) General TypeAE 400L No.67346 Year of construction2006 With switchgearcheck Floorspace1,00 x 1,00 m Total height2,30 m Weight1120 kg Extra information Mechanical seal fluid tank Generic medicinesOintmentsFine chemicalsOther chemicalGlass-lined ReactorsBiotec ...

General SKU331Y749 LocationBarneveld MakeDe Dietrich TypeAE630IMF2 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket35 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume630 Ltr. Motor2.6 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity684 l Vessel sizesø 1200 x 900 mm Dished bottomcheck ManholeDN300 Top connectionscheck OutletDN100 with valve Max. temperature—25 / 160 °C With propellor stirrercheck Motor2,60 kW (400 V, 1800 rpm, (Ex)) Speed mixing shaft300 rpm With jacketcheck Glass Reactors MaterialGlass - Enamel (3009) General No.69871 Year of construction2009 With switchgearcheck Floorspace1,70 x 1,70 m Total height3,20 m Weight1800 Extra information With Bartec control, type Polaris,  Mechanical seal fluid tank,  Generic medicinesOintmentsFine chemicalsOther chemicalGlass-lined Reac ...

General SKU473Y429 MakeHosokawa Micron B.V. Serial4606801/0200 TypeMicron Dryer MDV-5 (flash dryer / mill) + screw feeder DHA-200 Material Product contact materialStainless steel Cover materialStainless steel Rotor materialMild steel Extra information Temperature140 °C Weight5500 kilogram Rotor speed400 rpm Specified Features - Miscellaneous Mill Grindergrinding rotor with classifier in one body Motor55 kW Speed400 rpm Miscellaneous Mills MaterialMild steel, Stainless steel General Year of construction1995 Mounted on framecheck LocationBarneveld Weight5500 kg Extra information This Hosokawa Micron MDV-5 flash dryer combines drying, grinding and classifying in a single body: a vertically driven grinding rotor with an integrated classifier, housed in a dryer body with a wet material feeder inlet, a hot air/gas inlet and a product/air outlet at the top. Paints & c ...

Used bottling line for packaging oil / olive oil made by Robak. New 2018. The line is currently configured for 250-ml and 500-ml Marasca glass bottles. The filling and capping machines are set up for these capacities. The manufacturer also offers the option to fill round and plastic bottles of various capacities with this setup. It has primarily operated with 500 ml bottles, resulting in a production rate of: 1,000–1,200 bottles per hour. Total number of bottles produced: approximately 486,000. The line began operation in 2020. The line consists of the following components: 1. ANM-08 automatic bottle filler - 10 filling heads with Coriolis mass flow meters - Capacity: up to 1,500 bottles/hour 2. ZR-02 single-head automatic capping machine and MPZ-01 mechanical cap feeder - Capping machine equipped with a head for 31.5x24 aluminum caps - Capping machine capacity: u ...

COLLIN Teach-Line CSG 171 T Strand Granulator For sale is a used COLLIN Teach-Line CSG 171 T strand granulator. The compact tabletop machine is used to produce granules from round plastic or polymer strands. The previously extruded and cooled strands are fed via a pair of feed rollers and then granulated by a fixed counter knife and a rotating impact knife. The feeding and cutting process can be easily observed through the transparent protective cover. The cutting gap between the rotor blade and the counter blade is precisely adjustable. The desired speed can be regulated on the control panel. Technical data: Manufacturer: Dr. Collin GmbH Model: Teach-Line CSG 171 T Year of Make: 2009 Machine number: 9310 31 09 Connected load: 0.5 kW Electrical connection: 230 V / 50 Hz Nominal current according to nameplate: 6 A Dimensions: approx. 290 x 500 x 540 mm Weight: approx. ...

Key data: 2200 mm, 1500 mm, 1000 mm

Description, subject to prior sale. CNC 5-axis gantry milling machine with high dynamics Manufacturer: Parpas Type: Diamond linear Year of manufacture: 2013, Acceptance: 2014 Control: Heidenhain iTNC530 X (longitudinal travel): 2200 mm (+330) Y (transverse travel): 1500 mm (+330) Z (vertical travel): 1000 mm Distance between uprights: 2700 mm Max. distance between table surface and spindle tip with mounted milling head 1220 mm Linear axis feed speed: X and Y axis 0-60 m/min Z-axis 0-40 m/min Table surface: 2300 x 1600 mm Max. weight with optimal distribution: 6000 Kg/m2 T-slots 22 mm, distance between T-slots 200 mm. 5-axis orthogonal milling head with electrospindle Max. spindle speed 20,000 min-1 Spindle cone HSK 63 A A-axis ±105° (torque 830 Nm), C-axis ± 370° (torque 1200 Nm) 42 Stations Tool Changer Tool holder HSK 63A-100 Max. tool∅ 80mm  ...

What's included: Infeed and shredding • Genox CBS13080 metal infeed conveyor – heavy steel-slat belt for feeding bales or loose film into the pre-shredder • Genox YS1300 pre-shredder – single-shaft, hydraulic ram fed, 75 kW main drive. Opens bales and cuts film down before washing • Genox CBR6090L conveyor belt – 4 kW twin-angle belt conveyor Pre-washing • Genox GRD6025 pre-washer – 45 kW / 60 HP, 415 V / 50 Hz, built 2018, serial S19UL04, CE marked. Strips sand, grit and soil from the film before it reaches the granulators Size reduction • Genox GXC1200N film granulator – GXC1200 series heavy-duty granulator, 1,200 mm wide × 520 mm diameter rotor, outboard bearings, hydraulic-assisted chamber and screen opening • Genox V800 single-shaft shredder/granulator – 400 mm × 800 mm rotor, 35 reversible 40 mm cutters, hydraulic ram feed, 40 mm screen, app ...

Slitting amp; cut to length line 1 - Double head decoiler (hydr): gt; 20 ton capacity gt; with coil supply cart amp; lift min coil width: 500 mm both units are movable 2 - Pulling unit 3 - Shear for making the first clean cut 4 - Pre-leveller Ungerer 4 + 5 rolls hydraulically adjustable 5 - Slitting unit with 4 cuts 6 - Supply system for shear 7 - Shear for cut to length 8 - Conveyor table 9 - Broncx fine leveller 10 - Stacking unit gt; featured a mechanical back gauge; once plate make contact then the shear makes the cut max length of cut: 7 meters Total length of the installed line: 50 meters Material thickness x width: 2200 x 4 mm DECOILER(s): 20 ton

measuring range X-axis: 0 - 200 mm measuring range Z-axis: 0 - 300 mm tool adaptor: SK 40 / BT 40 Resolution: 0,01 mm repeating accuracy: 0,01 mm Ambinent temperature: 0 - 40 °C dimensions of the machine ca.: 0,30 x 0,19 x 0,64 m weight: 44 kg Tool Presetter KELCH - set line V123 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

3D -Venjakob Perfect Air Jet painting line: - Manufacturer: Venjakob - Year of construction: 2013 - Working width: 1.300mm - Max. part length 6.500mm - In U -shape with angle transfer Consisting of: 1. loading belt, length 3,050mm 2. free space für Sanding machine (only optional, not included in the price) 3. spraying machine VEN SPRAY PERFECT, length 5.510mm 4. flash -off dryer OIR, length 6,000mm 5. nozzle dryer VEN DRY AIR JET, length 4,160mm 6. angle transfer 180 degrees, with nozzle dryer 7. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 8. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 9. nozzle dryer VEN DRY AIR JET, length 5.160mm 4 pcs, IR tubes 10. 3D UV dryer, VEN DRY UV, GA + HG 11. removal area, belt of the UV dryer Further information: On request

turning diameter:640 / 400 mm turning length:1500 mm control:Siemens 840 D Powerline Travel turret No.1 (milling spindle) x/y/z:550 / 180 (±90) / 1585 mm Swivle angle milling spindle (B-axis):±120° interpol. ° Rapid traverse feeds turret 1 (milling head) x/y/z:40/24/60 m/min RPM milling spindle:12000 1/min power capacity - milling spindle:12 / 23 kW Torque of milling spindle:100 Nm Tool magazine for milling spindle (turret 1):120 HSK-A 63 Tool change time tool/tool, milling spindle:1,6 s Spindle 1 RPM:4000 1/min Spindle 1 power:36/ 45 kW Spindle 1 Torque:730 Nm Spindle 1 max. bar diameter:90 Spindle 2 RPM:4000 1/min Spindle 2 power:36 / 45 kW Spindle 2 torque:730 Nm Spindle 2 max. bar diameter:90 c-axis:0,001 ° Travel turret 2 x:225 mm Travel Turret 2 z:1595 mm RPM of rotary tools turret 2:4000 1/min no. of tools in turret 2:12 VDI 40 high-pressure pump:20 bar total power requiremen ...

pressure:600 t distance between columns:3640 mm stroke:350 mm no. of strokes:11 - 44 /min Distance table/ram, max. stroke up, adjustment up:1550 mm table surface area:3600 x 2500 mm sliding table:3600 x 2500 mm ram surface:3600 x 2500 mm Side window:2200 mm ram adjustment:400 mm material width coil line:500 - 1950 mm Material thickness at 1200 mm material width:0,6 - 2,5 mm Material thickness at 1850 mm material width:0,6 - 2,0 mm Material thickness at 1950 mm material width:0,6 - 1,75 mm Coil weight:35,0 t coil internal diameter:610 mm coil external diameter:900 - 1900 mm no. of straightening rolls:13 straightening roll diameter:50 mm Stack height:400 mm stacking dimensions - station 1+2 (L x W):150-2000 x 250-2000 mm stations:2 power requirement:112,0 + 35,0 kW Weight:390,0 t Dimensions (WxDxH):7,3 x 5,1 x 15,0 m Height above floor:9,1 m Height below floor:5,9 m clutch-/ brake combinat ...

rollforming line for simple angle profile Equipment consists of: 1 gt; decoiler 2 gt; roll forming line with 6 stands 3 gt; cutting unit

3-axle refrigerated semi-trailer Make: KRONE, Type: SD COOL LINER SDR27 EL4-DS, Year of manufacture: 2022, Serial number: WKESD000001055194, Registration number: 10/2022, Vehicle identification number: WKESD000001055194, permissible Total weight 39,000 kg, Double deck version, Clear interior length 13,310 mm, Clear interior width 2,460 mm, Clear interior height 2,630 mm, Refrigeration system CARRIER VECTOR 1550