blow moulder used for sale

For sale PET blower with related format molds: - 500ml - 750 ml (Both version for interlocking cap and for trigger) - 1 Lt - 1.25 LT The machine has a production capacity of 510 bottles/h Seen and liked

Manufacturer: Blow Moulding s.r.l. Machine type: BM 2000 D (CoEx) Stations / Stations: Double / Double Year of construction / built: 1999 Location: Europe/ Europe Control type / control system: Original control (Microset) Number of extruders: 4 Extruder sizes: 60, 35, 60, 35 - (24D) Hose head / parison head: NEWMA 6-layer CoEx single-head (New) / NEWMA 6-layer CoEx single-head (New) Mould platen sizes (mm): 290 x 380 Flaschenvolumen Max. / bottle volume max.: 3,2 Lit. Clamping force: 55 kN Accessories: - Viewing strip extruder / Viewstripe extruder - 2x rotating wide neck edge/ 2x rotary trimming devices - 5 suction conveyors for material/ 5 suction conveyors for materials - 1 dryer on extruder no. 4 – EVOH 1 dryer on extruder no. 4 – EVOH - 1 dispenser on the extruder No. 1 – main batch 1 dispenser on extruder no. 1 – master batch - 1 dispenser on ex ...

Neck: 48mm & 33mm // Output: 2200

Pallet with 8 side channel blowers, dimensions: 1700 mm x 700 mm x 1000 mm.

3 pallets witch 19 side channel blowers, dimensions: (3x) 1800 mm x 500 mm x 1000 mm.

centrifugal fan, dust extraction fan, fan, suction, dust blower -Motor power: 37 kW -Speed: 2940 rpm -Inlet connection: O 420 mm -Connection output: 450 x 300 mm -Dimensions: 1700/1300/H1080 mm -Weight: 500kg

Overview The Krones Contiform 3 stretch blow moulder was manufactured in 2015 and installed in a mineral water company in Germany to replace an older contiform. As most other machines of this line are already older, the owner decided to stop production. Due to this, the machine has less than 3900 operating hours and is in excellent condition. With the machine, there are two sets of blow moulds (nine moulds in each set) The documentation and program backup are also available. In addition to the blow moulder, there is the preform kipper, hopper, alimentation and sorting. Tech Specs: Capacity: up to 18,000 bph Number of blowing stations: 8 Max. container volume: 3,0l Operating hours: < 3900 h Integrated power recovery Additional Equipment: Blow moulds for 0,5l; 1,0l  Preform feeding system Technical documentation Air conveyor

Overview The blow moulder was built in 1999 by French manufacturer SIDEL. The machine is in very good working condition, still in production and can be viewed in person. Techn. Details Current capacity: 23.400 bph at 1.25L Working hours: 40.000                   Number of moulds: 18       Moulds type: Shell type quick change Formats produced: 1.25L Bottles: Cylindrical petaloid base Oven type: Sidel Neck personalization: PCO 1881  Type of preforms: with recycled PET resin Machine was regularly maintained     Machine equipped with:                     Sidel preform tipper Sidel hopper with cover & feeder Sidel preforms unscrambler Sidel preforms infeed rail Blowing station for 18 moulds Sidel electrical cabinet with Siemens Sidel PCC drive & control

Overview The blow moulder was built in 2011 by French manufacturer SIDEL. The machine is in very good working condition, is already professionally dismantled and stored in a warehouse. Techn. Details        Working hours: 37.289 h Capacity Max. 32.000 bph Recently produced at 25.600 bph at 2.0L Number of moulds: 16 hot or cold molds Molds: Hot molds up to 75°C, or standard Equipped with quick change Oven type: Sidel Universal Eco2 C3 special filters Number of heating modules: 20 modules Neck personalization: 38 mm Machine was regularily maintained                           Machine equipped with:                     Sidel preforms tipper Sidel preforms hopper & feeder AGR preforms disinfection Sidel Predis Ultra Clean Vulcanic water/oil thermoregulator Sidel electrical cabinet Sidel control panel Sidel PCC

Overview The BLOMAX 4 blow molder was manufactured by the German company SIG Corpoplast (now KHS) in 2006. It has been overhauled by a machine builder and can be inspected in dry operation. Blow molds are not included, but can be obtained.  Technical details  Output: up to 7,200 bph 4 cavities Dimensions: 4960 mm x 3900 mm x 3000 mm  Weight: 15 t  Operating hours: 44.736  Bottles Volume: 200 ml - 2000 ml   Max. Diameter: 115 mm  Max. Length: 350 mm Preforms  Length: 60 - 200 mm Max. Support ring diameter: 35 mm  Scope of delivery  Blow molder is completely equipped with the system for preform feeding (silo, elevator, sorting, chute)

Overview The KSB3000 blowing machine was manufactured in 2001 by the Austrian machine builder KOSME. It is located at a machine builder and can be visited in dry run to see the functionality of the machine.  Technical details  Capacity: 3.600 bph  3 cavities Dimensions (LxWxH): 6830 mm x 2860 mm x 2450 mm  space requirement approx. 9x5 m²  weight: 4,5 t  Operating hours: 19.935   Bottles Volume: 250 ml - 2500 ml   Max. Diameter: 110 mm  Scope of delivery  Blow molding machine is completely equipped with the system for preform feeding (the silo, the preform elevator, the preform aligner and the preform infeed).

Overview The machine built in 2015 by Lithuanian manufacturer FlexBlow. The machine has been overhauled and new dumper, hopper and unscrambler will be built. The machine is already disassembled. Please note that the picture of the advertisement is for reference only.  Techn. Details  Capacity: 5.500 bph (at 1,0l)  Number of cavities: 4  Max. bottle neck: 48 mm Max. bottle size: 2,0l  Previously used neck size: 38 mm  Spare parts, blow molds and new set of neck specific parts can be purchased additionally Siemens controller and English operational language

Overview  The KSB4000 blowing machine was manufactured in 2002 by the Austrian manufacturer KOSME. This machine can produce 0.5l, 1.5l & 2.0l bottles. Technical details  Capacity: 4.000 bph 4 cavities Scope of delivery  Preform feeder, Three types of molds for 0.5L, 1.5L and 2.0L bottles

Overview The KSB3000 blowing machine was manufactured in 2000 by the Austrian machine builder KOSME. It is located at a machine builder and can be visited in dry run to see the functionality of the machine.  Technical details  Capacity: 3.600 bph  3 cavities Dimensions (LxWxH): 6830 mm x 2860 mm x 2450 mm  Space requirement approx. 9x5 m²  Weight: 4,5 t  Operating hours: 23.824   Bottles Volume: 250 ml - 2500 ml   Max. Diameter: 110 mm  Scope of delivery  Blow molding machine is completely equipped with the system for preform feeding (the silo, the preform elevator, the preform aligner and the preform infeed).

Overview This blowmoulder was manufactured in 2005 by Italian manufacturer SMI. Techn. Data 14 cavities Formats: 0,5 – 2,0 l, round, squared Scope of delivery Blowmoulding machine SMI SR14 Chiller ASKI year 2005 Preform tipper Preform feeder

Overview The BLOMAX 16 blow molder was manufactured by the German company Krupp Corpoplast (now KHS) in 2000 and until recently was part of a PET filling line at a major Austrian beverage bottler. The blow molder is now becoming available as the owner is investing in a completely new line. Technical details Output: up to 24,000 bph 16 cavities Volume: 0.2 - 3.0 l  Peripherals  Preform feeder | Tanner AG | SBT-3012 | -  Tipper  Silo Lift  Sorting  Chute

Overview This blowmoulder was built in 1992 from French manufacturer Sidel. It can produce up to 4.000 bottles per hour. Techn. Details Capacity: 4.000 bph 4 cavities Scope of delivery Blowmoulding machine | SIDEL | SBO 4/6 | 1992 Preform feeder Two types of molds for 1.5 L and 2.0 L bottles Cooling unit: RIEDEL

Overview  The machine was built in 2008 by the former manufacturer SIG Corpoplast (now KHS). The machine is still in operation and can be inspected at any time. Technical data Capacity: last 21.115 bph (at 1,5l)  Formats: 500ml, 750ml, 1.000ml, 1.500ml  PCO 1881  Operating voltage: 400V/ 50 Hz   Control voltage: 24 VDC  Scope of delivery  Blow molding machine | SIG Corpoplast | BLOMAX 12 | 2008  Preform feeder | Transver AG | - | 2008 Silo  Elevator  Sorting Chute

Overview This machine was built in 1998 by French manufacturer Sidel. The machine is in very good working condition, is already professionally dismantled and stored in a warehouse. Techn. Details Capacity: 7.200 bph in 1,5L Number of moulds:  6 (molds not included) Equipped with quick change for shell molds Number of heating modules: 10 modules Neck personalization: 29/25           Working hours: 47.000 only            Machine was regularily maintained       Machine equipped with:                     Sidel preforms elevator to unscrambler Sidel preforms unscrambler & feeder Sidel oven & blowing wheel for 6 molds Sidel electrical cabinet Sidel PCC drive & control panel Big set of spare parts list upon request

Overview The blowing machine TMS 2001 G was manufactured in 2001 by Spanish manufacturer SIDE. It processes with a capacity of 1,000 bph at 5l. The machine is stored because the former user has changed to a new one. It is located in Spain and has already been disassembled and available immediately. Tech Specs Capacity: 1,000 bph at 5000 ml    Additional Equipment No blow molds included CP: Siemens simatic MP270

Overview The blow molder was built in 2002 by the former manufacturer SIG Corpoplast (now KHS). The machine is still in operation and can be visited. Technical data Nominal capacity: 30,000 bottles/h Last used formats: 1.0L (27,000 bph) 1.25L (27,000 bph) 2.0L (22,500 bph) Bottle Volume: 200 - 3,000 ml Max. Diameter: 126 mm Length: 107 - 350 mm Preform Length: 60 - 200 mm Max. Diameter: 48 mm Dimensions (LxWxH): 9,920 mm x 6,279 mm x 3,357 mm Required space: 11,500 mm x 11,300 mm  Weight: 31.15 t Scope of delivery Blomax 20 Preform feeder Air transport Blomax 18 as spare parts dispenser Additional costs for spare parts, dismantling, packing and loading: EUR 45,000

High performance blower fan dust blower Built in 1967 Type 1000 275 R MD 63 m³ / s 1000 u/min 71.3 kw Manufacturer Heinrich Lühr dust technology

Rietschle, Herz, Elektror, Stephan Simens-Elmo ... separate images, data and videos available All Function Tested

SPINDLE MOULDER Type SAC SUERI TS 110 motor power Hp 5,5 volt. 380/50

REP model V68 Y20W vertical rubber injection presses, Type G8, year 2003, Clamp force 4000kN, Platen size: 630 x 800mm, Distance between columns: 730/440mm, Daylight: approx 1000mm, Injection unit type Y2000, Piston dia 81.5mm, Shot capacity: 2000cm3, Injection pressure: 1500 Bar Top and bottom ejectors. O/a dimensions: 2950mm x 1410mm x 4800mm high, weight approx 12000kgs. Complete and in very good condition (not operated for over 2 years).

Spindle diameter 30 mm Spindle speeds (4 levels) 1800/3000/6000/9000 RPM Spindle stroke 100 mm Spindle turning - 5° up to + 30 ° Max clamping height 105 mm Work table 710 x 640 mm Table height 900 mm G & HM-FS200S-STI

Weibert WJ-F50 Table milling machine NEW Safety rulers in the shaper fence strongly ribbed cast iron table 1100x900mm electrical height adjustment 200 mm 5.5 KW R + L barrel 3000 to 10000 U/1 Control Panel top Milling spindle can be exchanged Tool - diameter When profiling 275mm at the tenoning 400 m stable role statement WJ-600600 K 4 Special price:

GLIMEK Long Moulder MO-881 exhibition machine, brand new condition, year of manufacture: 2018 weight range 30 - 1.800 g capacity range up to 3.000 pieces per hour working width up to 650 mm foldable second pressure board for easy cleaning pressure board adjustable in height pressure board with adjustable side guides machine movable on castors curling net made from stainless steel infeed hopper with centering device adjustable roller spacing three pairs of rollers made of food-safe plastic

Type: T-01 Exhibit and demonstration model! - Table length: 1200 mm - Table width: 530 mm - Table height: 900 mm - Length of slide: 1,200 mm - Width of the slide: 315 mm - Height of the slide: 142 mm - Inclination of the milling spindle: 0 to -45° - Useful length of the milling spindle: 125 mm - Spindle speeds: 3500/6000/8000/10000 rpm - Thorn diameter: 30 mm - max tool diameter: 240 mm - max. can-draw tool diameter: 230 mm - Profile milling: 210 - 240 mm - Cone milling: 320 mm - Diameter suction nozzle: 2 x 120 mm electrical connection: - Motor power: 5.0 kW - Voltage: 400 V - Phases: 3 Ph - Current type: AC (AC) - Frequency: 50 Hz Dimensions: - Length: 1200 mm - Width/depth: 1400 mm - Weight: 510 kg Space: - Length: 4,400 mm - Width/depth: 4,420 mm The data refer to the recommended installation area and result from the dimensions of the machine  ...

Table milling machine SCM T 120 C. SUVA protection Maintenance: Malawer AG Spindle 30 mm 2900/4400/6000/7800/10000 RPM Weight 450 kg Masch No. 20474 L x W x H: 115 x 90 x 86 (150) cm Built in 1961 Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Type : T900 Spindle-30 mm spindle rotation speeds- 2500 / 5000 /8000U /Min/rpm Spindle tilt- 5° to +45° spindle trave-140 mm max. clamping height-125 mm max. tool diameter-230 mm Table dimensions-1020x700 mm table height-900 mm dust collector plug-60/120 mm engine power-3 kW 400V weight net/gross-280 kg packaging dimensions-1150x1155x730mm

Type TP4 Spindle rotation speeds 20 000 U/Min/rpm Table dimensions 900x770 mm Weight 800 kg Transport dimensions 1800 x1000x1000mm

Kehl machine / milling machine Schneider 3-roll feed SUVA protection L x W x H: 120 x 100 x 170 cm Weight approx. 580 kg Built in 1981 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Rotary vane pump of Bush / AZO Air capacity: 160 m ³/h Power: 5.5 kw Vacuum capacity: 20 mbar

KonturfräÃ?maschine crosscut saw with sliding table Type: FK5 Second-hand machine Sled Spindle diameter 30 mm Speeds: 4 Height adjustment: Handwheel Power: 6kW Circular saw, crosscut saw Machine is fully functional. Machine is in good condition. We love to hear from you.

spindle moulder with tilting shaft SAC SUERI TS 145 second hand machine electric shaft inclination -5 ° / + 45 ° electric mast lifting extended plans support extension motor power Hp 7,5 n.5 shaft rotation speed electrical inversion of the direction of rotation shaft diameter mm. 35 volt. 380/50

SPINDLE MOULDER type SCM T130 . second hand diam. spindle mm. 40 volt. 380/50

Type SX1325B-3 Working area 1300x2500x210 mm Platform size 1480x3100 mm Resolutions ±0.05 mm System resolutions ±0.001 Repeat positioning accuracy 0.03 mm Table structure – vacuum adsorption Shaft drive mode – XY axis rack drive Z axis screw drive Shaft power mode – Panasonic servo motor (Z axis with brake functions) Max. traveling speed 35 000 mm/min Max. working speed 20 000 r/min Spindle power 4.5 kW, 6kW Spindle speed 0-18 000 r/min Run command G code Vacuum pump 7.5 kW Voltage AXC380/3HP/50Hz Weight 2000 kg

WEINIG planer and moulder model Unimat 22 A Equipment: - Package - Lifting table (no pit required) - automatic stacking strip removal - Rubberized inclined conveyor - Rubberized separation - Longitudinal conveyor for planing.- Moulder - Unimat 22 A with soundproof cabin - 2nd operating unit - Manual acceptance Weinig Planer.- Automatic throat machine, technical data: Spindle arrangement: U - R - L - O - U Saw Working width: 220 mm Working height: 120 mm Motor power feed: 4 kW Motor power of the working spindles: 4 kW Speed of the working spindles: 6000 rpm. Diameter of the working spindles 40 mm Feed infinitely variable 6 - 32 m/min Diameter of feed rollers (hardened) 140 mm Space requirement line: 12.7 x 5.0 m Spelling mistakes and errors excepted

Detailed info: Aluminium format sliding carriage with hardened steel guide rods. Large solid work table made of grey cast iron. ø190 mm table opening with undercounter extraction. Electronic speed display. Milling stop ø250 mm. Built-in milling spindle lock. 4 speeds as standard. Milling spindle can be swiveled backwards. With integral stop 500 mm and telescopic stop 900 mm, extendable, with 2 stops and tensioners made in EU Technical data: 400V Spindle diameter 30 mm swiveling spindle 90°/45° Spindle height adjustment 175 mm Spindle clamping length 125 mm tool diameter 250 mm with optionally available tenon slot hood 320 mm Spindle speed 1400/3500/6000/8000 Weight 390 kg

BOTTENE – PASMEC moulding line for beads and planks, composed as follows: Automatic loader PASMEC, year 2005 : - PLC for work cycle programming - arm with suction cup system and vacuum pump - 1600mm useful stroke, brushless motor and prismatic guides - side aligners + pneumatic introducer pusher BOTTENE TARGET 606 moulder with 6 shafts, year 2017: – useful working measures 230x150mm – gimbal towing and differentiated pneumatic pressure – variable feed speed 6 – 60 mt/min with inverter – feed motor KW 7,5 – HP 10 – top feed wheel before the 1st shaft – group of tandem feed wheels in front of the 2nd shaft – overlapping feed wheels (top + bottom in the plane): at machine entrance, before the 1st shaft between the 4th and 5th tree at machine output, after the 6th shaft – short 1200mm entry plane – lubrication pump – protection cabin � ...

Onsrud twin table copy shaper ONSRUD-auto dual table rotary shaper, model RS-28, for continuous production, 2-speed cutter (5,000/10,000 rpm.) pivots alternately to the right or left table, as center clamp engages, the table rotates, the cutter pivots into your part and continues around template machining the part, the operator unloads and loads new part on alternate table, when cut is complete, operator presses the foot pedal, the cutter then pivots to alternate table &cuts, cycle continues.. $9,900 Contact Fred (716) 433 4224 (12:00 noon is best time to call)

Table dimensions mm: 1000 x 900 With drive system

According to the PDF prospectus!

Gas injection technology Bauer – 11 pcs. 2001 – 2007 year prod. Price - 1.500 Euro/pcs.

Type MX5117B Work table dimensions 1130x670 mm Spindle speed diameter 35 mm Spindle rotation speed 6000-8000-800-10000 rpm Max. working thickness 120 mm Motor power 4 kW Dust exhaust outlets 200x65, 200x80 mm Transport dimensions 1130x670x1100mm Weight 325 kg

WEINIG planer/moulder Unimat 22A with 9 heads Year of construction: 1987 Serial number 222-896. The planer is in good working condition and has been partially overhauled, cleaned and subjected to careful technical controls. • The machine has been thoroughly cleaned and technically checked. • Some wear parts have been replaced. • A test run was carried out to ensure functionality. • The machine is bolted to a wooden structure and is ready for shipment. • The planer and moulder is equipped with all the tools and is sold as such. Further technical data of the machine: Maximum planing width: 220 mm Maximum planing height: 140 mm Diameter of the spindles: 40 mm Spindle speed: 6000 rpm Length of the inlet table: 2 m The machine has a total of 9 spindles with the following configuration: 1. Lower spindle / dressing spindle : 5.5 kW 2. Right spindle /  ...

Planing width mm: 330 Planing height mm: 120 Inlet table length mm: 1800 Feed max m/min: 6-36 (inverter) Speed max: 6500 Number of spindles: 6 Spindle arrangement: 01 - Planing shaft - KW 15 01 - Spindles right - KW 15 01 - Spindles left - KW 15 01 - Spindles above - KW 15 01 - Spindles above KW 18 01 - Spindles below KW 15 Software: Control 100 PC Plus Spindle diameter mm: 50 Handling System Weight Kg: 5000

Table milling machine Comag Technical data • Speed (rPM): 2500/4500/6000 • Machine is in working condition

With feed and vacuum pump