blow molding used for sale

Manufacturer: Fu Chun Shin Machinery Model: SD 60004M Year of Manufacture: 2009/ 2015/2016 Type of Machine : Injection Molding Machine Heater Capacity: 46.68 kW Motor Power: 44 kW Pump Pressure:140 kg/cm² Find more here - / Contact us at -

B&A REF: 9223 TON: 70 SCREW DIAMETER: 32MM SHOT WEIGHT: 109 STROKE VOLUME: 120CM3 INJECTION PRESSURE: 1700AR PLATEN SIZES: 530 X 495MM DBTB: 360 X 315MM MIN MOULD HEIGHT: 120MM MAX MOULD HEIGHT: 400MM MOULD OPENING STROKE: 310MM MAX DAYLIGHT: 710MM EJECTOR STROKE: 100MM CONTROLS: DIMI EL 2000 CORE PULLING: 1 AIR VALVES: 1 MOTOR: 11 HEATING CAPACITY: 6KW ROBOT INTERFACE: EUROMAP 12 SCREW DRIVE: HYDRAULIC

Offered is a Boy 100E 2K injection molding machine (year 2020, approx. 15160h) including Boy 2C XS unit, Boy LR5 handling (year 2020) as well as Dorner GAL-60 conveyor. 1000kN clamping force, 2-fold core pull, 2-fold air blast, 24mm screw (main unit) + 22mm screw (2K), fully enclosed, hydraulic ejector 42.7kN, OPC-UA & network interfaces, EUROMAP-67 robot interface, robot stroke X/Y/Z: 300mm/800mm/1500mm, conveyor 400mm width, 2m length. Viewing is possible upon arrangement.

Offered is a rubber injection moulding machine of the company Klöckner DESMA, stroke volume 1600cm³, clamping force 2500kN, injection pressure 2078bar, machine weight approx. 11000kg. A visit on site is possible by arrangement.

A two-component injection molding machine Krauss Maffei Multinject is available. Clamping force: 3500kN, platen dimensions X/Y: 1280mm/1190mm, second unit: 390CZ. Machine dimensions X/Y/Z: approx. 6300mm/2000mm/3100mm, weight: approx. 17000kg, control: Krauss Maffei MC4, operating hours: 78424h. The control is defective. Documentation vorhanden. An on-site inspection is possible.

Offered are 2 identical horizontally operating hydraulic injection molding machines from ARBURG. Clamping force: 700kN, opening stroke: 250mm, mold installation height: 200-430mm, mold mounting plates X/Y: 476mm/476mm, movable mold half maximum weight: 250kg, screw diameter: 20/25/30mm, injection pressure: 2250/2240/1550bar, horizontal injection position: max. 120mm, weight: 2090kg, machine dimensions X/Y/Z: approx. 3500mm/1900mm/1950mm. Documentation vorhanden, viewing possible by arrangement.

Offered is a Boy 80E 2K injection molding machine (year 2016, approx. 29398 operating hours) including 2C XS aggregate, Wittmann Primus 16 handling (year 2022), Dorner GAL-60 conveyor. 800kN clamping force, 2-fold core pull, 2-fold air blast, 24mm screw, completely enclosed, hydraulic ejector 42.7kN, EUROMAP 67 interface, robot stroke X/Y/Z: 2000mm/1200mm/620mm, conveyor 400mm width, 2m length. Viewing is possible by arrangement.

rand: Dr.Boy Model: 60E Year of construction: 2023 Working hours: 50 Screw diameter: 32 mm Injection pressure max.: 2.142 bar Shotvolume max.: 100,5 cm3 Clamping force: 60 T Max. distance between holms: 360 x 335 mm Min. mould height: 250 mm Distance between plates max. 650 mm Measurements: 3.450 x 1.150 x 1.950 mm Weight: 2.250 kg Options: • Procan ALPHA 4 display • Hydraulic core pull (2x) • Air valve (2x) • Interface package (incl. RS232/485, OPC-UA + Licence fee) • 4 Free programmable AIO’s • Robot interface Euromap 67 • Interface between safety fence and machine Euromap 78 • Colouring contact interface • Quick change mould package – Cooling circuits (3x) on fixed & moving platen – Water distributor 8-fold – Ejector with quick coupling – Open nozzle with thread tip • Energy distribution box 6-fold (feeding via second cable)  ...

Extruder + electric cabinet output: 200 kg Heads not included Winder not included

Plastic injection molding machine SUMITOMO DEMAG C75 – Year 2008 Sumitomo Demag C75 model, year 2008.

Dimensions (L/W/H): 1250x880x850 mm Weight: 180 kg Total power requirement: 1,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1100 kN, 25 mm

warehouse no.: 503665 manufacturer: Wittmann Battenfeld type: EcoPower 110-350 controller: UNILOG B6P year of construction: 2014 operation hours: 56851 h clamping force: 1100 kN distance between tie-bars h x v: 470 x 420 mm size of mould plates h x v: 680 x 663 mm min. mould height: 200 mm max. mould height: 450 mm max. open daylight: 830 mm opening stroke: 380 mm screw diameter: 25 mm swept volume: 86 ccm injection pressure: 3000 bar equipment included screen text german Screentext Multi-Language CEE-socket 16A machine incl. water flow regulator Anti vibration mounts measures of machine l x w x h: 4.57m x 1.5m x 2.13m total weight: 4800KG

Manufacturer: Engel Model: Emotion 440/160 Year of Manufacture: 2018 Max. installation height :460 mm • Center support package • Max. closing force :1600 kN Cylinder size: 40 mm • Screw CRN coated • OptiShut backflow preventer • max. spray pressure 1940 bar • Injection volume 55-220 cc Max. injection weight :174 g Operating hours: 33526 h Equipment: • 1 core pull incl. auxiliary unit • Plasticizing cylinder set, highly wear-resistant design • Needle valve nozzle • E-Flomo • IQ weight control • IQ Clamp control • EM 63 interface • separate water and electricity connections Find more here - / Contact us at -

Manufacturer: Krauss Maffei Model: 80-390-C2 Year of Manufacture: 2001 Type of Machine : Hydraulic Injection Molding Machine Tonnage (Clamping Force): 80 t Tie Bar Distance (H x V): 405 x 405 mm Platen Size: 610 x 610 mm Ejector Hole: Centre Knee Lever: No Minimum Mold Height: 250 mm Maximum Mold Height: Not applicable Opening Stroke: 750 mm Screw Diameter: 35 mm Shot Weight: 140 g Core Functions: 2 Handling System: No Electrical Data Operating Voltage: 400 V, 3-phase Frequency: 50 Hz Total Current (Iges): not specified Motor Current (In Motor): 97 A Heating Current (In Heating): 117 A Single Motor Current: 37 A Fuse Protection: - Motor: 100 A - Heating: 125 A Find more here - / Contact us at -

Key data: 1300 kN, 475 g/PS, 55 mm

Technical data: Clamping force: 130 t Year of Make: 2008 Shot weight: 475.9 g Injection unit: 1000 Screw diameter: 55 mm Specific injection pressure: 1904 bar Displacement: 523 cc Clamping platens (dimensions): 745 x 745 mm Clear width (spar dimension): 470 x 470 mm Ejector force: 22.6 kN Tool installation height (min.): 300 mm Opening travel: 600 mm Max. panel spacing: 900 mm Weight: 8000 kg Control: MC5

Key data: 3500 kN, 70 mm

DEMAG Ergotech 350/710-2300 Concept • Clamping Force: ~3,500 kN (≈350 ton) • Injection Unit: • Screw Diameter: typically 70 mm • Injection Volume: ~1,212 cm³ • Injection Pressure: up to ~1,877 bar • Tie Bar Spacing: ~710 × 630 mm • Plate Dimensions: ~710 mm plate width • Opening Stroke: ~675 mm

Key data: 1500 kN, 40 mm

ARBURG ALLROUNDER 520 H 1500-400 (2015) Injection molding machine + WITTMANN ROBOT + Conveyor belt In operation Hours: 68946 h. Clamping force: 1500 kN Clamping unit 520 H Opening force / stroke: 450 mm. Fixed / variable mould mounting height: 250-550 mm. Fixed / variable platen spacing: 700-1000 mm. Column spacing: 520 x 520 mm Mold clamping platens (width x height) 695 x 695 mm. Weight of movable mould half: 1000 kg max. Force – Ejector stroke: 40 kN – 175 mm Idle cycle time: Conformt Min 1.5 – s- 364 Screw diameter: 40 mm. Effective screw length: 20 L/D Screw stroke: 160 mm. Calculated injection volume: 201 cm3 Weight per injection: 184 g. Ps. Material flow rate: 29 kg/h. PS Injection pressure: 2000 s-bar Post-pressure time: 45-2000 s-bar Injection flow: 214 cm3/s Injection speed: 170 mm/s Power – heating zones: 9.7 kW – 5 Oil capacity: 160 l. Weight ...

Key data: 1280 kN

Clamping force: 128 t. Tie-bar spacing: 410 × 410 mm. Machine no. 13A350 Platen size: 650 × 652 mm. Mold height (min–max): 140–440 mm. Opening stroke: 360 mm. Ejector stroke: 95 mm. Ejector force: 4 t. Screw diameter: 42 / 47 / 53 mm. L/D ratio: 21.9 / 19.6 / 17.4 Diam. 42: 216 g. Diam.47: 271 g. Diam.53: 344 g. Injection volume: 235 / 295 / 375 cm3. Injection pressure: 2005 / 1600 / 1260 kg/cm2. Injection stroke: 170 mm. Screw rotation speed: 0–200 rpm. Machine dimensions (L × W × H): 5.0 × 1.2 × 1.88 m Machine weight: 4500 kg.

Key data: 1800 kN

Clamping force: 180 t; 4-column toggle system; tie-bar spacing: 480×480 mm; platen size: 720×720 mm; mold height: 150–550 mm; opening stroke: 396 mm; ejector stroke: 130 mm; screw diameter: 60 mm (to be confirmed); injection volume: 678 cm³; 4 heating zones; power supply: 3×380 V–50 Hz; installed power: 45.3 kW; machine dimensions: 5950×1400×1920 mm; weight: 6700 kg; Machine No.: ED1020.

Key data: 800 kN

Clamping force: 80 t. Clamping type: Toggle system. Tie-bar spacing: 270 × 310 mm. Platen size: 310 × 310 mm. Mold height: 150–270 mm. Opening stroke (approx.): 310 mm. Ejector stroke: 70 mm. Screw diameter: 26 mm (to be confirmed), Injection volume: 124 cm³. Injection weight (PS): 60–103 g. L/D ratio: 19–22:1. Approx. machine dimensions: 3500 × 1200 × 1600 mm. Weight: 3000–4000 kg. Machine No.: 200000800292.

Clamping force 135 t, toggle clamping system with 4 tie bars, tie-bar spacing 400 × 400 mm, mold height 150–500 mm, opening stroke 400 mm, ejector stroke 150 mm, screw diameters 45/50/55 mm, injection volume 286–427 cm³, injection pressure 1210–1800 bar, 4 heating zones, installed power 31 kW, overall dimensions approx. 4,900 × 1,200 × 2,050 mm, weight approx. 5,000–5,700 kg. Machine No. 959.

Two injection molding machines are offered, year of manufacture 2008 and 2009. Clamping force: 500kN, tie bar spacing X/Y: 320mm/320mm, mold mounting plates X/Y: 446mm/446mm, opening stroke: 350mm, max. platen distance: 550mm, injection unit 170: screw diameter: 25mm-30mm, shot volume: approx. 59ccm/25mm screw, approx. 85ccm/30mm screw, shot weight: approx. 62g to 77g, injection pressure: up to 2500bar. Inspection is possible by arrangement.

B&A REF: 9170 TON: 50 SCREW DIAMETER: 14MM SHOT WEIGHT: 1 STROKE VOLUME: 1.1CM3 INJECTION PRESSURE: 2500AR PLATEN SIZES: 364 X 196MM MIN MOULD HEIGHT: 100MM MOULD OPENING STROKE: 200MM MAX DAYLIGHT: 300MM EJECTOR STROKE: 50MM CONTROLS: UNILOG B4

B&A REF: 9127 TON: 80 SCREW DIAMETER: 40MM SHOT WEIGHT: 183 STROKE VOLUME: 201CM3 INJECTION PRESSURE: 1860AR PLATEN SIZES: 670 X 670MM DBTB: 420 X 420MM MIN MOULD HEIGHT: 250MM MOULD OPENING STROKE: 500MM MAX DAYLIGHT: 750MM EJECTOR STROKE: 150MM CONTROLS: MC5 CORE PULLING: 2 AIR VALVES: 2 MOTOR: 15 HEATING CAPACITY: 10.97KW SCREW DRIVE: HYDRAULIC

A fully equipped Arburg injection molding machine including clean air supply Filter Fan Unit and removal robot is available. Clamping force: 1600kN, screw diameter: 45mm, max. cylinder heating: 450°C, total connected load: 85.5kW, machine elevation: 100mm, operating hours: approx. 13361h. Arburg Multilift H: axis: B, Z-axis stroke: 1400mm, conveyor belt length: 2500mm, conveyor belt width: 600mm, deposit height range: 900mm-1300mm, temperature resistance: 160°C. Documentation available. An on-site inspection is possible.

B&A REF: 9024 TON: 160 SCREW DIAMETER: 50MM SHOT WEIGHT: 343 STROKE VOLUME: 377CM3 INJECTION PRESSURE: 1892AR PLATEN SIZES: 710 X 660MM DBTB: 520 X 470MM MIN MOULD HEIGHT: 200MM MAX MOULD HEIGHT: 500MM MOULD OPENING STROKE: 450MM MAX DAYLIGHT: 950MM EJECTOR STROKE: 150MM CONTROLS: MC6 CORE PULLING: 2 AIR VALVES: 2 HEATING CAPACITY: 17.7KW ROBOT INTERFACE: EUROMAP 67 ROBOT: GIEGER TECNOMATIC SCREW DRIVE: ELECTRIC HOT RUNNER: 12 ZONE

Spritzgießmaschine HUARONG HRN-400 wurde 2008 in Taiwan von HUARONG PLASTIC MACHINERY CO., LTD. gebaut. Die Maschine wird für die wirtschaftliche Produktion von Kunststoffteilen in verschiedenen Farben, Formen und Größen eingesetzt. Diese Teile werden im Spritzgussverfahren hergestellt, bei dem plastifizierter Kunststoff in eine Form eingefüllt und dann mit hoher Presskraft gepresst wird. Um die höchste Produktivität und Wiederholbarkeit der hergestellten Teile zu erreichen, verfügt die Maschine über eine Reihe zuverlässiger Lösungen. Dazu gehören unter anderem ein Präzisions-Formenspannsystem, das mit einer Kraft von 400 Tonnen arbeitet, und ein Potentiometer, das die Position der Formen genau erfasst. Die Verformung der Aufspannplatten hingegen wird durch speziell entwickelte Säulen minimiert. Ein Zentralschmiersystem schmiert kontinuierlich alle beweglichen Teile der  ...

An Arburg injection molding machine with a rotary unit on the moving mold half is available. Column spacing: 420mm, clamping force: 1000kN, opening force: 250kN, opening stroke: 500mm, min. mold installation height: 250mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg, ejector stroke: 175mm. Injection unit 350, screw diameter: 35mm/40mm/45mm, max. shot volume: 230cm³, max. injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 4300mm/1700mm/2750mm, weight: approx. 4500kg, operating hours: approx. 75443h. Documentation available. On-site inspection is possible.

2 Babyplast-machines for sale. Injection capacity 9 cm3. One is year 2009, one is year 2011

Manufacturer: Engel Victory 330/80 Model:Victory 330/80 Year of Manufacture: 2006 Operating hours: 95257 Closing force: 80 t Screw diameter: 40 mm Max. injection volume: 154 cm3 Fixing plate: 670 x 600 mm Machine weight: 5.6 t Find more here - / Contact us at -

Screw diameter: 120 mm Injectable volume / Shot volume: 5598 cm3 Injection pressure : 1137 bar Column passage / Bettween tie bar: 1060 x 1060 mm Mould thickness mini-maxi / Mould tickness mini-max: 350 - 1100 mm Opening stroke: 1150 mm Euromap 12 4 Hydraulic Cores / 4 Corepulling

Manufacturer:Engel Model:VC 750/150 PHOENIX Year of Manufacture: 2003 Operating hours: 112150 Closing force: 150 t Screw diameter: 50 mm Max. injection volume: 392 cm3 Fixing plate: 750 x 750 mm Machine weight: 9.5 t Find more here - / Contact us at -

Screw diameter: 70 mm Injectable volume Shot volume: 5598 cm3 Injection pressure : 1137 bar Column pass-through: 1060 x 1060 mm Moulded thickness / Mold tickness mini -max: 350 - 1100 mm Opening stroke: 1150 mm Euromap 12 4 hydraulic cores - 4 cOREPULLING

Manufacturer: Arburg Model:720S 3200/1300 Year of Manufacture: 2010 Operating hours: 84854 Closing force: 320 t Screw diameter: 60 mm Max. injection volume: 664 cm3 Fixing plate: 1030 x 1030 mm Machine weight: 17.5 t Find more here - / Contact us at -

Screw diameter: 45 mm Injectable volume / Shot volume: 358 cm3 Injection Pressure: 2426 bar Column passage / Bettween tie bar: 720 x 720 mm Thickness of the mould mini /Mold tickness -max: 320 - 725 mm Opening stroke: 730 mm Euromap 12 4 hydraulic cores - 4 corepulling

Key data: 175 kN, 301 g/PS, 50 mm

1.0 St. gebr. Injection Molding Machine Manufacturer: NETSTAL Type: SYNERGY S-1750-460 Year of Make: 2004 Clamping force: 175 tons Handlebar spacing 570 x 570 mm Installation height min./max.: 400 - 700 mm Opening travel: 450 mm Screws DN: 50 mm Max. displacement: 314 cm³ Moulded part weight in hp: 301 g 2 x Core Pull Interface Robot The machine is sold without the SEPRO robot pictured. The SEPRO robot in the pictures is not included.

Manufacturer: Engel Model: Victory 1050/200 Year of Manufacture: 2006 Machine type: Injection Molding Machine Operating hours: 107027 Closing force: 200 t Screw diameter: 55 mm Max. injection volume: 511 cm3 Fixing plate: 860 x 860 mm Machine weight: 12.9 t Find more here - / Contact us at -

Key data: 5500 mm, 1127 , 70

Screw diameter: 70 mm Injection weight in polystyrene: 1127 g Clamping force: 5500 kN Screw diameter: 70 mm Stroke volume: 1239 cm³ Injection weight in polystyrene: 1127 g/hp Injection pressure: 1,990 bar Clamping force: 550 t Lights Tie bar spacing H x V: 920 x 830 mm Tool installation height - min.: 350 mm Opening distance: 750/1300 mm Microprocessor control: KEBA 2880 Screen text: German Instruction manual: German FHK interface for robots: Euromap 67 Core pull: 4x Without material hopper / without water battery: -/- Pump drive power: 55+4 kW Total connected load: 95.4 kW Total weight: 21,000 kg Total size: 7.5 x 2.5 x 2.6 m Payment terms: 100 % before taking over the machine, purely net

Manufacturer: Arburg Model: 520S 1500/800 + Robot Type: Injection moulding machine Year of manufacture : 2010 Operating hours: 91720 Closing force: 150 t Screw diameter: 45 mm Max. injection volume: 318 cm3 Fixing plate: 688 x 688 mm Machine weight: 6.84 t Find more here - / Contact us at -

Inv. Num. : 8935 Type: AX 80-380 Producer: Krauss Maffei Created: 2011 Parameters: Control System: MC5 4.5 Clamping force: 80 t Screw diameter: 30 mm

Manufacturer: Engel Model: Insert 80H/35 – Vertical Type: Vertical injection moulding machine Year of manufacture: 2007 Operating hours: 22404 Closing force: 35 t Screw diameter: 18 mm Max. injection volume: 25.4 cm3 Fixing plate: D1200 mm / 560 x 430 mm Machine weight: 6.1 t Find more here - / Contact us at -

Operating hours: 97’919 h Operating pressure (bar): 210 Injection force (kN): 450 Closing force (kN): 2400 Opening stroke (mm): 0-510 Mold installation height: 460-800 mm Nominal voltage (V / Hz): 400/50 Nominal current (A): 136 Rated power (kW): 75 Screw diameter (Ø): 55 Air valves: 4 Controllable

Operating hours: 132‘186 h Absolute cycle counter: C120 = 062077965 Operating pressure (bar): 210 Injection force (kN): 450 Closing force (kN): 3000 Opening stroke (mm): 0-700 Mold installation height: 400-750 mm Nominal voltage (V / Hz): 400 / 50 Nominal current (A): 99,5 Rated power (kW): 55 Screw diameter (Ø): 55 Air valves: 4 Controllable -With dosing system -Handling robot Wittman, available as an option upon customer request

Operating pressure (bar): 210 Injection force (kN): 450 Closing force (kN): 2400 Opening stroke (mm): 0-510 Mold installation height: 460-800 mm Condition: Defective – for spare parts (Circuit board removed, hydraulic valve removed)

Operating hours: 75’851 h Operating pressure (bar): 210 Injection force (kN): 450 Closing force (kN): 2400 Opening stroke (mm): 0-510 Mold installation height: 260-600 mm Nominal voltage (V / Hz): 400/50 Nominal current (A): 100 Rated power (kW): 55 Screw diameter (Ø): 55

Inv. Num. : 8936 Type: KM 65-180 CX Producer: Krauss Maffei Created: 2006 Parameters: Clamping force: 65 t Screw diameter: 28 mm Injection capacity: 74 cm³ Distance between stands: 420 x 420 mm Ejector stroke length: 150 mm Injection weight: 3700 kg

Inv. Num. : 8937 Type: KM 65-180 CX Producer: Krauss Maffei Created: 2008 Parameters: Control System: MC5 2.0 Clamping force: 65 t Screw diameter: 25 mm Injection capacity: 74 cm³ Distance between stands: 420 x 420 mm Ejector stroke length: 150 mm Injection weight: 3700 kg

BILLION HERCULE 100 T Reference: H260/100 Condition: Very good Technical Specifications: Clamping force: 100 T / 1000 KN Tie bar spacing: 445 x 445 mm Platen dimensions: 630 x 630 mm Mold thickness (Min/Max): 180- 400 mm Opening stroke: 380 mm Injection volume: 139 cm³ Injection pressure: 1843 bar Screw diameter: 35 mm L/D ratio: 20 Dimensions & Weight: Weight: 5 100 kg

Manufacturer: Engel Model: e victory 50/50 Year of Manufacture: 2019 Operating Hours: 18,660 Hours Condition: Very good technical condition Technical Details Safety Standard: CE Type Injection Unit: Horizontal Injection Unit: 50 Material Injection Unit: Thermoplastics Screw Diameter: 18 mm Drive Injection Unit: Electric Construction: Holmlos Clamping Plate: 450 x 500mm Closing Force: 50to Platen Spacing: 600 mm Drive: Hydraulisch/ Hybrid Tool Weight Max: 600 Kg

Manufacturer: Engel Model: e victory 170/110 Year of Manufacture: 2019 Total Running Hours: 23,838 Hours Condition: Very good technical condition Technical Details Safety Standard: CE Type Injection Unit: Horizontal Injection Unit: 170 Material Injection Unit: Thermoplastics Screw Diameter: 25 mm Drive Injection Unit: Electric Construction: Holmlos Clamping Plate: 680 x 740mm Closing Force: 110to Platen Spacing: 800 mm Drive: Hydraulisch/ Hybrid Tool Weight Max: 1600 Kg Automation: Linear Roboter Vipe Find more here - / Contact us at -