We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
123,707 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Rotary vane vacuum pump (roots blowers) Status: Rebuilt Manufacturer: Leybold Type: WA 251 Warranty: 12 months Accessories: manual; Spare parts list; Oil filling Delivery time: In stock
used
Rotary vane vacuum pump (roots blowers) Status: Rebuilt Manufacturer: Leybold Type: WA 501 Warranty: 12 months after delivery Accessories: owner's manual; Spare parts list; Oil filling Delivery time: In stock; ready for operation
used
The blower is refurbished and can be supplied as a complete unit.
used
The fan speed is refurbished, all wear parts are new, can be offered as a complete unit.
used
Blow-through lock, all-out lock, cell lock, rotary valve, cell wheel lock, dosing lock used AZO GmbH Type: Z100/5 F 4.6 Inlet approx.: Ø 250 mm Height approx. 450 mm Cell wheel Ø approx. 300 mm Rotary wheel width approx. 250 mm Wing height approx. 15 mm approx. 8 cells Hole circle flange Ø approx. 335 mm with intake filter NW 100 EIT-4181 geared motor Sew 0.18/0.66 kW 7.3/30 rpm 380 V Total dimensions approx.: 1800 x 400 x 450 mm The lock was used in the food industry. Presumably for transport and dosage of flour. used Rotary Valve, Rotary Airlock, Dosing Valve, Dosing System Changes and errors in the technical data, information and prices as well as intermediate sale reserved.
used
Centrifugal compressor in landfill gas use. Technical data sheet located as an attachment. The compressor is located in a very good condition, is until end of July 2018 in the operation and is very robust (casing). Pressure difference 180mbar and 15 kW drive motor. Radial blower used for landfill gas utilization. Technical specification see attached data sheet. The blower is in good technical condition and still in operation on a bio-gas plant in Germany untill end of July 2018. Pressure drop 180 mbar with 15kW electrical drive.
used
The fan speed is refurbished, can be offered as a complete unit.
used
The fan is installed in a soundproofing hood completely, the stage is refurbished.
used
IMPCO used blow molding machines -Model : BD30 -Screw diameter : 100mm -Manufactured year `1997 & 2000 -Quantity : 2 units Produce 5 gallon (20 liter) PC bottles
used
The fan speed is refurbished, can be supplied as a complete unit.
used
The fan speeds are reconditioned, can be supplied as a complete unit.
used
Side channel blowers for silos Becker SD 6 2.4 kW, 220 / 380 V, 2880 / min 4.6 cubic meters / min = 276 cubic metres / hour, 3000 mm WS, good condition. Width 40 cm, length 75 cm, height 45 cm Weight approx. 40 kg. â?¬150 pickup in 76829 Landau, or freight shipping
used
Key data: 300 , 4
Bandwidth - up to 460 mm Band thickness - 0,5-4 mm Motor drive - 6 kW together with Reel 1.5 T - non-powered
used
Manufacture | Manufacturer: Bekum Machine type | Machine type: BA15 Station | Stations: Single station | Single station Construction year | Year of construction: 2003 Location | Location: UES Clamping force | Clamping force: 170 kN Control system | Control type: Orig. Bekum Parison Control | WBK: 50 points | 50 points Extruder | Extruder: S 82/20D Parison Head | Hose head: Accu-head AKZ2.3 refurbished 2020 | Battery head AKZ2.3 overhauled in 2020 Mould Dimension | Shape dimensions mm (A length/B width/C depth): 525/400/2150 bottle volume | Bottle volume: 40 L Monitour language | Screen language: English | English Delivery time | Delivery time: Immediately | Right away
used
V1 0.85 cbm/s =, PT = 52.3 bar, 15 / 60 °C, n = t1 = 2.910 rpm, 1 = P1, CC, PW = 5, 58kW 198 kg/m, electric motor 7.5 kW
used
Blowing machine Sidel Model SBO 18 Built in 2001 Power: 26,500 B/H Engine hours approx 44,000
used
AOKI SBIII-350LL-40 injection stretch blow molding machine -Manufactured year : 2005 -Location : Korea
used
1 of used blowmolder, make SIDEL, type SBO 14 SERIES 2, new 2004, Siemens S7-400, capacity 2.0L 16000 bph - 0.5L 21500 bph, moulds potentially included 0.5 L + 2.0 L, round Petaloid base, quick-change for GUPM shell moulds, maximum bottle size 2.5 L, oven type linear, number of heating modules 14, preform neck 28 / 1810, operating hours 72958, production hours 34191. Service by Sidel and own technicians. Condition reasonable/good. With: Sidel pre-form hopper, pre-form tipper, various pneumatic conveyors Rafael/Compere, some OEM spare parts. No water chiller, no hi-pressure compressor. Last production date June 2019. Available now.
used
1 of used blowmolder, make SIDEL, type SBO 14 SERIES 2, new 2001, Siemens S7-400, capacity 0.5L 21500 bph, moulds potentially included 0.5 L squarround champagne base, quick-change for GUPM shell moulds, maximum bottle size 2.5 L, oven type linear, number of heating modules 14, preform neck 30/25. Service by Sidel and own technicians. Condition reasonable - oven chain incomplete, cam-card removed but new available with spares. With: Sidel pre-form hopper, pre-form tipper, various Ling Systems pneumatic conveyors, some OEM spare parts. No water chiller, no hi-pressure compressor. Last production date March 2019. Available now.
used
SIDEL SBO 16 / 20 Universal Eco2 Predis Ul.Cl. PET blowing machine for 16 hot or cold moulds. The manufacturing year is 2011 and the capacity is of 25.600 BPH (1.600 bpm/h). The moulds are hot up to 75°C (or standard) and the machine is equipped with quick change for moulds. The oven type is Sidel Universal Eco2 C3 special filters. The number of heating modules are 20. Personalization for preform neck 38mm 3 starts. Machine equipped with: - Sidel preforms tipper, hopper & feeder - Sidel AGR preforms disinfection - Sidel Predis Ultra Clean - Vulcanic water/oil thermoregulator - Sidel PCC drive & electrical cabinet Regular maintenance and service by SIDEL. The machine is still installed and has to be dismantled. If you are interested, you can contact us for further information and to discuss about the availability.
used
1 used Strec blower, manufacturer SIDEL, type SBO 14 SERIES 2, built 2004, Siemens S7-400, capacity at 2.0L 16000 Fl/h - at 0.5L 21500 Fl/h,, in principle with shapes 0.5 L + 2.0 L round petaloid, quickly adjustable by GUPM, max bottle size 2.5 L, furnace linear, heating modules 14, Formling mouth 28 / 1810, operating hours 72958, production hours 34191. Maintenance by sidel and own technicians. Condition: neat/good. With: Sidel Pre-form Hopper/Kipper, various to air transport manufacturer Rafael/Compere, some spare parts. No cooling unit, no high-pressure compressor. Last production June 2019. Immediately available.
used
1 used stretch blower, Manufacturer SIDEL, type SBO 14 SERIES 2, built 2001, Siemens S7-400, power at 0.5L 21500 Fl/h, basically with shapes 0.5 L square/round Champagne bottom, quickly adjustable by GUPM, max bottle size 2.5 L, furnace linear, heating modules 14, forming mouth 30/25. Maintenance by Sidel and own technicians. Condition: Oven chain not complete, but curve card removes new as spare part. With: Sidel Pre-form Hopper/Kipper, various to air transport manufacturer Ling Systems, some spare parts. No cooling unit, no high-pressure compressor. Last production March 2019. Immediately available.
used
Contiform S12 Isofill VG-PET-CIP 1.440-32-141
used
Blow volume 0.25-3.0 ltr. PET, 6 stations, up to 7,200 bottles/hour, inckl preform silo, steep conveyor and installer. Moulds, compressor and water cooler available at an additional cost. Good condition!
used
2-station machine, Preform silo, - guide and - set-up. For an extra price: compressor + moulds. Power up to 2900 bottles/hour
used
PET stretch blower, incl. Preform silo, conveyor, sorter and feed, up to 6000 bottles/hour, 6 stations, 0.2 - 3.0 litre, technically / optically good condition. Available at an additional cost: compressor system, mould cooler and moulds.
used
PET stretching / blowing machine, up to 3000 bottles / hour, incl. preform bunkers, conveyors and feeders. Available for an additional charge: moulds for 0.3-2 l., compressor and cooling unit
new
Blow volume 0.2 - 10.0 ltr. Capacity: up to 1200 bottles/hour NEW MACHINE, 1-station machine, incl. preform bunker and feeder. Gergen Supplement: Compressor, refrigeration unit and moulds
used
10 blow-up stations , max. 12,000 - 14,000 bottles/hr, volume: 0.2 - 3.0 liters, preform silo, steep conveyor and feeder, equipped for PCO 1810 x 28mm. Available at an additional cost: compressor system, mould cooler, mould and air conveying system
used
PET plug-in / blow era 10 blowing stations, capacity: approx. 8,000 - up to 10,000 bottles / hrs. Volume: 0.2 - 3.0 litre, incl. preform silo and steep conveyor and feeder.
used
Blow volume 0.2-2.0 ltr. PET stretch blower, 3 blow stations, capacity: up to approx. 3,600 bottles / h. Incl. preform bunker, lift and sorter, Available at extra cost: compressor, cooler and moulds
used
6 stations machine, blow volume 0.2-2.0 litre, capacity: approx. 7,200 bottles / hrs, incl. preform containers, loaders and sorters. Available at an extra cost: 0.5 + 2.0 ltr. CSD 6-speed moulds, compressor system, cooling unit
Two-station machine for articles up to 5 ltr. Extruder 90/22D. Single head CoEx (virgin - regrind - virgin). Good condition. Still in production, free approx. June 2020. With waste conveyor below the machine
used
• Blow moulding machine SIPA mod. SF 8/4 – 4.000 bph: • Year: 1998 • Producer: SIPA • Speed (BPH): 4.000 bph • 4 cavities. • Format available: 0.5 lt - 1.5 lt - 2.0 lt. • Preform loader. • Preform tipper. • Complete with air recovery system. • Safety protections. • Code W 14
used
p1=1.0 bar, p2=1.4 bar Speed: 1470/2940 rpm Power: 7.4/12.2 kW, incl. silencer and frame construction
used
Equipment / Additional information: 200-240V 50/60Hz
used
AOKI One step PET injection stretch blow molding machines for jar
used
Double station machine for articles up to 6 ltr. Extruder S 70/20D. Double head, 160 mm center distance. Closing force 120 kN. was running 4.000 hours only (lab-machine), very good condition
used
We offer a refurbished rotary piston blower brand: RKR / Robuschi Type: K70R. See pictures. All our refurbished blowers are equipped with new bearings and sealing elements. If you have any questions, please call.
We offer a refurbished rotary piston blower brand: RKR / Robuschi Type: K80R. See pictures. All our refurbished blowers are equipped with new bearings and sealing elements. If you have any questions, please call.
used
The blower level is completely overhauled. All our refurbished blowers are equipped with new bearings and sealing elements. If you have any questions, please call us.
used
- Manufacturer: Bekum - Machine type: 506D - Stations/Stations: Double Station /doublestation - Clamping Force: 170 kN - Built: 2003-Retrofit in 2021 by UES - Location/ Location: UES warehouse / UES warehouse - Control type/ Control system: New B&R control by UES/ New B&R Control by UES - WBK / Parison control: 100 points /100 points WBK - Extruder | Extruder: Grooved barrel extruder S 100/24D - Hose head/ Parison head: On request / on request - Shape dimensions mm/ Mold dimensions mm (A length/length x W width/ width x C depth /depth): 550/500/2150 - Bottle volume Max./ Bottle volume max.: 15/ 20 lit. - Screen language / Monitor language: English/ German - Accessories/ Accessories: On request - Weight/Weight (kg): 12000 - Price /Price: On request / on request
used
- Manufacturer: Bekum - Machine type/ Machine type: BA 34.2 - Stations / Stations: Single Station/ Single Station - Built: 2001 - Location / Location Germany - Control type/ Control system: Original Bekum Beckhoff - Extruder | Extruder: 100/24D - Hose head / Parison head: AKZ4 (New by UES !) - Dimension dimensions mm /mold dimensions mm (A length/ length x W width/ width x C depth/ 700/700/2250 - Bottle volume Max./ Bottle volume max.: 30 lit - Screen language/ Monitor language: German/English - Delivery time | Delivery time: 30 days/ 30 days - Weight/Weight (kg): 13000
used
Manufacturer Bekum Machine type BM303D Station Double station Construction year 1989 Place Europe Closing force 50 kN Control Siemens Parison Control | WBK 30 Points WBK Extruder 70/20D Shape dimension in mm (Length x width x height) 400/300/ 2100 Parison Head 3BKSV30 Max bottle volume 3 lit Machine weight (kg) 6 t Monitour language German
used
Aerzener VM 9 R Delta Screw Screw Compressor with soundproofing hood Suction pressure: 1 bar Suction volume: 600m3/h Engine power: 55 kW Very good condition, directly from production!
used
Aerzen GMA 13.6 Rotary piston blower with soundproofing hood Engine power 30 kW Very good condition, directly from production!
used
This pharmaceutical grade bottle washing machine has been designed to meet the needs of the most demanding customers and to comply with international standards in order to provide high level performance along with easy access to components, all in a small footprint. This rotary washing system was developed and designed keeping in mind the high level of cleanliness required in the pharmaceutical industry. High washing and rinsing performance. Small footprint, size and utility consumption. The washing chamber is made entirely of stainless steel and is surrounded by a Plexiglass cover. Presence of an electrical panel for easy control management.
used
Krosownice in good technical condition. Machine warehouse in warehouse in Poland, 55-300 Środa Śląska If necessary, additional photos or videos or if you are planning a visit to check our equipment, we invite you. Possible organization of transport, the cost of transport covered by the buyer. Person: Michal Pienio Production Manager UAP-2 marketing2.legnicafaurecia.com FAURECIA Legnica Decoration Plant, Interior Furnishings 180 Gniewomierz 59-241 Legnickie Pole – Poland M+48660719841 Faurecia Legnica Decorations S.A. . Gniewomierz 180, 59-241 Legnickie Pole, entered into the Register of Entrepreneurs of the Court Register kept by the District Court for Wrocław-Fabryczna in Wrocław, IX Commercial Department of the National Court Register, under KRS number No. 0000874432, NIP 6912552442, share capital: PLN 2,560,000.00 (paid in full).
used
water-cooled with WOODS Aerofil blower Dimensions: 1.7 x 1.6 x 2.6 m to give favorable against corresponding bid
used
The rotary piston blower is completely overhauled. All our refurbished blowers are equipped with new bearings and sealing elements. If you have any questions, please call us.