blow film line used for sale

Line is consisting of:, Weber slicer, Type: CCS904, Serial number: 7096, Year of construction: 2007, Capacity: 2000 RPM, Slice thickness: 0.5 - 50 mm, Compressed air: 10 Bar, 150 L/min., Power: 3 x 400V, 50Hz, 10 kW, Dimensions: 13400 x 1900 x 2600 mm, Including CCW904 weigher, CCR904 rocker, CCA speedloader and CCU portioning unit, Pago labeler, Type: System 516, Serial number: 212516068, Year of construction: 2012, Mettler Toledo metaldetector and checkweigher, Type: XS3, Serial number: 35000430, Year of construction: 2008, With reject, Bosch Sigpack Systems robot / cartoning line, Type: LDM + TTLi, Serial number: J-01659-LDM-042 / J-01659-TTLi-077, Viewtech optical control, Type: VT2007/010, Serial number: VT2007-DCDCL/057, With reject

Description: NEW in box, never used, Order number: ON17163, Capacity: max 800 pigs/hr., Products: pork carcasses, left & right, Slaughtered weight: 70 - 120 kg, Air pressure: 6 - 8 Bar, 285 Nl/min., Power: 3 x 400V, 50Hz, 45kW, Dimensions: 10000 x 5150 x 2300 mm

- Forming and pressing line for the production of 3-layer chipboards. - Maximum net dimensions of board 29355 x 2500 mm. - Net thickness of the boards from 4 mm to 40 mm. - Approximate board density 700 kg/m³ (for 16 mm thick board). - Production capacity: 29.40 m³/hour (for 29355 x 2500 x 16 mm boards). - Includes: • Queue preparation and management system. • 2 particle gluers for the different mixtures. • SCHENK forming system: year of manufacture 1988 (updated in 2001), with 3 forming stations (for the top, bottom and infill layers), length 28000 mm. • DIEEFFENBACHER continuous pre-press with cut-off station: year of manufacture 1989 (updated in 2001), maximum pre-pressing speed 350 mm/sec, length 28000 mm. • Acceleration conveyor belt: length 35000 mm. • DIEEFFENBACHER HPOG 80/26.200/35 continuous 2-plate hydraulic press: year of manufacture ...

Make: Wittmann Type: Linear Robot / Handling System Model: W711-0304 Year: 2005 Serial number: n/a Technical data: - Voltage: 200–230 V - Power: 1.2 kVA - Current: 5.3 A - Stroke X-axis: 620 mm - Stroke Y-axis: 1000 mm - Stroke Z-axis: 2000 mm Equipment: - Teach pendant (Wittmann TeachBox, Serie 6) - Linear axis system - Pneumatic gripper unit - Cable chain guidance - Vacuum / air hoses - Control unit with cabling Condition: Used Auction-ID: A7-45993-58

Used Filling Line Sidel For Water 2014 Air Compressor ABC 3HA-4-TFK-LT 200kw Air compressor Low Fusheng SA75 75KW Ice water Machine Nanjing Wuzhou LSBLG 1290DT 1256.8KW 298.8KW Ice water machine Shanghai Baoqing WA-78W/PT4EN-I 49kw Blow Molding Machine SIDEL/SBO20 Blower Capacity：36000P/H Power：406KW Spindle heads 262 pcs Manipulator 10pcs/each Blow moulding satation 20 pcs SIDEL Filling Machine Capacity： 36000P/H Power： 35KW Filling Valves 60pcs Capping heads 15 pcs SIDEL 36000 bph Labelling Machine Capacity： 600B/min Power： 50KW Vacuum drum 1 set Scaleplate 2 pcs Capping heads 20 pcs SMI Shrink Wrapper Capacity： 35 P/Min Power： 75KW Divider： 4 sets Infeed： 4 sets Former 5 sets TW Benifit Palletizer with Conveyor and Divider Capacity： 35 P/M Power： 25KW Used Filling Line Sidel For Water 2014, this complete line for water is in  ...

Technical Specifications & Performance Data The Used Linear Labeler Non Stop PackLab 2019 WING CWW 20 is a high-efficiency, second hand self-adhesive labeling solution designed for continuous operation in beverage production and industrial packaging environments. Optimized for wrap-around and front/back applications, it integrates seamlessly into a used bottling line alongside rinsing, filling, and capping equipment. Manufacturer: PackLab Model: WING CWW 20 Year of manufacture: 2019 Machine type: Linear self-adhesive labeler with non-stop dual stations Production speed: up to 20,000 bottles/hour (format and label dependent) Label applications: Wrap-around body labels on cylindrical containers; partial front and back labels on shaped containers Number of labeling stations: 2 (automatic interchange at end of reel, web break, or label absence) Container types handled: Glass bottles, metal c ...

Used AVE Mod. RV-4 can line - 600 can per hourTechnical Specifications & Performance DataThis second hand complete canning line is engineered for industrial packaging of oil and other liquid products. Centered on a volumetric automatic linear filler, it provides consistent dosing accuracy for aluminum cans and integrates a dedicated press-on cap application system with pick & place handling. The line includes infeed and accumulation tables with connecting conveyors for streamlined flow between modules. No labeling machine is included, as cans are lithographed.Production speed: 600 containers/hourYear of manufacture: 2001Filling technology: Volumetric, automatic linearFiller model: RV-4Formats: Set up for 2 and 5 liters, but it can also be adjusted for other formatsNo. of filling nozzles: 4Cap application: Automatic press-on capper, single-head (MONOTESTA) with pick & place systemContaine ...

Used KHS Beer can line - 48.000 CPHTechnical Specifications & Performance DataThis KHS complete beer can bottling line is engineered for high-speed beverage production and industrial packaging performance. It is a second hand, used bottling line configured for aluminum cans with robust components across depalletizing, filling, seaming, pasteurization, inspection, packaging, and palletizing. The line delivers consistent throughput and quality suitable for large-scale beverage production.Production speed: up to 48,000 cans per hour at 0.5L; 41,000 cans per hour at 0.568LContainer types: Aluminum cansFormats: Compatible with 0.5L, 0.568L can formatsCan dimensions: Diameter 66.30 mm; Height 168 mmLid specifications: Aluminum; Diameter 59.44 mm; Height 2.07 mmFilling technology: Volumetric pressure filling with MID (magnetic inductive flow meters)Seaming technology: High-speed multi-head can  ...

Technical Specifications & Performance Data The Used Complete Bottling Line Krones, from the year 2015, is engineered for high-efficiency operations within the beverage production industry. Designed to process up to 48,000 bottles per hour, this second-hand machinery is ideal for medium to large-scale production needs. Production Speed: 48,000 bottles per hour Compatible Bottle Formats: 0.38 L, 0.55 L Container Types: PET Neck Type: 30/25 Machine Components: 12 items Advanced Automation & Control Systems This used bottling line is equipped with advanced automation capabilities and a user-friendly control panel, ensuring high precision in filling, labeling, and capping processes. The line includes integrated safety features, adhering to stringent industrial packaging standards, making it a reliable asset for operators. The electrical systems and automation technologies ensure streamlined  ...

Technical Specifications & Performance Data Line type: Used complete bottling line (second hand) configured for PET still water Manufacturers: Krones and Gebo Cermex Year of build: 2013 Nominal speed: up to 31,500 bottles/hour (0.35 L and 0.50 L) Bottle formats: 0.35 L, 0.50 L Container type: PET with 29/25 neck Product type: Still water (non-carbonated) Main modules: Krones Contifeed preform feeder, Krones Preform Check Inspector, Krones Contiform stretch blow molder, Krones ErgoBloc L 40-15 blow–fill–cap monoblock, Krones Checkmat cap inspector, Krones Contiroll roll-fed labeler, Gebo Cermex shrink wrapper, Gebo Cermex case packer Line condition: In production Documentation: OEM manuals available Safety: Safety features and guarding included Advanced Automation & Control Systems This used bottling line leverages Krones’ integrated line control for synchronized blow moldi ...

Used aseptic filling line Tetra Pak A3 FLEX 200S up to 7000 l/h The Used aseptic filling line Tetra Pak A3 FLEX 200S up to 7000 l/h provides an advanced solution for the aseptic bottling of dairy products and fruit juices. Consequently, this line fills 200 ml Slim Brick containers, ensuring high production efficiency and maintaining the sterility of the product throughout the entire packaging process. Line Features of the Used aseptic filling line Tetra Pak A3 FLEX The bottling line operates with a capacity of up to 7000 liters per hour, ensuring high standards of safety and quality. Furthermore, the aseptic system prevents bacterial contamination, making this solution ideal for packaging sensitive liquids. Additionally, the line includes a conveyor system that facilitates the smooth transfer of containers between different processing stages, ensuring an uninterrupted workflow. Machines  ...

Used Complete Bottling Line for wine immediately available for sale: This used bottling line is made up of used equipment that can work mainly with still wine. The used Used Complete Bottling line has an isobaric monoblock that allows you to work both slightly sparkling and sparkling wines. Currently, it is used for wines without gas but also for some production with sparkling wine. The cap in this case is a classic aluminium screw. The used Complete Bottling Line wine-filling is completely automatic from the depalletizer to the palletizer. The packing of the used line is made with three separate machines that form, box and close the American carton. The operators currently used on the used Complete Bottling Line are 3 plus a quarter for the forklift during loading and unloading. Some used equipment is also delivered to the used bottling line for wine. These are for the standard 0.75 CL  ...

Used Brewing and filling line for beer HG Machinery 800 kg/hour The Used Brewing and filling line for beer HG Machinery 800 kg/hour delivers precise, hygienic, and continuous beer production and bottling. With a nominal capacity of 800 kilograms per hour, this system serves as an ideal solution for craft and semi-industrial breweries. Moreover, it integrates advanced features to ensure consistent quality. Grinding and Mashing System This brewing line includes a double-roller malt mill that processes 500 to 800 kilograms per hour. HG Machinery manufactured the unit using stainless steel and equipped it with a 3.5 kilowatt motor. In addition, the adjustable roller width ensures efficient malt crushing. As a result, the design reduces noise and dust, significantly improving workplace conditions. The mash tun and lauter tun each provide 1500 liters of useful capacity, with a gross capacity o ...

Used bottling line SIDEL for still water in PET bottles 25200 bph The used bottling line SIDEL for still water in PET bottles 25200 bph provides a complete solution for bottling still water. Currently, the line remains connected to power, so buyers can test it directly. SIDEL designed the system in 2006 to handle PET bottles ranging from 350 ml to 1.5 liters. As a result, the line maintains high productivity and flexibility. General line data This used bottling line SIDEL for still water in PET bottles 25200 bph processes up to 25200 bottles per hour. Specifically, it uses 30/25 neck-type bottles, which match standard formats across the industry. SIDEL equipped the line with a SB014 blow molder featuring 14 cavities. Furthermore, the filling and capping monoblock includes 40 filling valves and 10 capping heads, making it suitable for still products. Main installed machines The line inclu ...

Used KRONES spirits filling line, roud glass 500 BPM - year 2003Technical Specifications & Performance DataThis complete round glass bottling line delivers high-speed performance for industrial packaging and beverage production. Built around Krones engineering, the line is configured for glass bottles in 0.7L, 0.75L, and 1.0L formats. With an output of 500–600 BPM (up to 36,000 bottles per hour), it is a robust second hand solution for producers seeking reliable throughput and consistent product quality.Production speed: 500–600 BPM (up to 36,000 bph)Filling type: vacuum filing Bottle formats: Compatible with 0.7L, 0.75L, 1.0L bottle formatsContainers: Designed for Glass bottle handlingCore components (models): Krones Variojet (72-head rinser), Krones Isofill (108-head isobaric filler), Krones Topmatic/Zalkin (18-head capper), Cold glue front & back labeling, Logics & Control L ...

Complete Bottling Line for Water (PET 1.5L) – Overview This used PET bottling line is configured for still water in 1.5-liter bottles, delivering a performance range of approximately 12,000 to 16,000 bottles per hour. Designed for industrial packaging and beverage production, it combines proven second hand equipment from recognized manufacturers to offer a reliable, efficient solution for a used bottling line. The configuration includes preform handling, blow molding, filling, capping support, labeling, shrink wrapping, handle application, palletizing, and conveyors, enabling a seamless end-to-end packaging process. Key components include a preform tipper and elevator by Sameto Technifil, a Siedel SBO10 blow molder, an Alsim Asmojet filler, an Arol cap feeder, a Kronos Contiroll labeling machine, an ACMI Fenix 165 shrink wrapper, and a Smipack HA50 handle applicator. This versatile ...

Used Water Complete Bottling Line Flat Drinks 300 bph 18.9L CapSnap The CapSnap Adapta Series is a modular integrated bottle washing, filling, and capping system. It is the perfect solution for medium-sized HOD water bottling operations. Designed for adaptability – these machines can be configured to handle both 3-Gallon and 5-Gallon bottles. This complete system effectively handles 300 – 600 BPH. Manufacturer: CAP SNAP – Portola – USA Year of production: 1999 (completely refurbished in 2015 and since then it has worked only 500 hours) Capacity: 300 bph Required energy sources: air 6 bar, power 40 kW, cleaning water supply 2 bar and filling water supply Line composition: Semi-automatic cap removal device: This device is used to remove caps from bottles. Entrance conveyor: On this conveyor belt, the bottles are manually placed. Prewash with cold water through nozzles ...

Used ELOPAK sks-s60S shikoku filling lineTechnical Specifications & Performance DataThis aseptic gable-top carton filling machine is engineered for high-integrity beverage packaging, delivering reliable performance for long-life products. Manufactured by Shikoku Kakoki in 2007, it operates with low accumulated hours and supports multiple carton formats for flexible production planning in industrial packaging and beverage production environments.Manufacturer: Elopak Shikoku KakokiModel: SKS-S60SYear of manufacture: 2007Operating hours: 3339Filling mode: AsepticContainer type: Gable-top cartonsCompatible formats: 0.5L, 0.75L, 1.0LElectrical supply: 400 V, 50 Hz, 3-phaseCurrent draw: 114 ACompressed air pressure: 550–990 kPaAir consumption: 2460 NL/minAdvanced Automation & Control SystemsDesigned for aseptic operation, this machine supports precision filling in a controlled sterile env ...

Used Tetra Pak TBA19 330 Prisma line 9000 bph - 2008Technical Specifications & Performance DataThis used bottling line is a Tetra Pak A3 Flex V300 configuration designed specifically for 0.33 L Tetra Prisma cartons, ideal for second hand industrial packaging and beverage production environments. Engineered for aseptic operation, it supports reliable high-speed packaging for dairy and juice applications with consistent quality and uptime.Manufacturer: Tetra PakMain filler: TBA 19, Version 300VProduction speed: Up to approx. 7,500 packs/hourFormat compatibility: 0.33 L Prisma (330 ml)Container type: Carton (Tetra Brik/Tetra Prisma)Filler year: 2009Capper: CAP 30 for Dream Cap (YOM 2019)Packer: TCBP 32 cardboard packer (YOM 2012)Ancillary equipment: Conveyor line, line controller, Domino printer, paper trolleyAseptic packaging: Yes (for long shelf-life products)Reported hours: Filler approx ...

Used STORK glass line for spirits 12000 BPH - shaped, taperedTechnical Specifications & Performance DataThis complete used bottling line for glass bottles is engineered around a Stork rinser–filler–capper monoblock with vacuum filling, complemented by wet-glue front, back, and neck labeling. It is a second hand industrial packaging solution designed for efficient beverage production on round, shaped, and tapered glass containers.Line type: Complete glass bottling lineProduction speed: 200 BPM (approximately 12,000 bottles per hour)Bottle shapes: Round, shaped, taperedFormats: Compatible with 0.35L, 0.7L, 0.75L, 1.14L bottle formatsContainers: Designed for Glass bottle handlingFilling principle: Vacuum fillingLabeling: Wet glue labeller for front, back, and neck labelsElectrical supply: 415 V / 50 Hz on most equipment; select components 240 V / 50 HzKey equipment and model refer ...

Used BERTOLASO Epica line for spirits, glass & PET - 12000 bphTechnical Specifications & Performance DataThis complete used bottling line is centered on a Bertolaso Epica 32/32/8 rinsing, filling, and capping monoblock. Designed for mixed container handling, it supports both flask-shaped and round bottles in Glass and PET. The line operates up to 200 bpm (approximately 12,000 bph depending on format) and is equipped with a wet glue labeling system for front and back labels. Components span key packaging stages from depalletizing through case packing and sealing, with integrated print and inspection.Production speed: up to 200 bpm (format-dependent)Filling type: Vacuum filling Bottle formats: Compatible with 0.1L, 0.2L, 0.3L, 0.375L, 0.5L bottlesContainers: Designed for PET and Glass bottle handling; flask and round shapesCore monoblock: Bertolaso Epica 32/32/8 (rinsing/filling/capping)La ...

Used bottling line PROCOMAC for still and sparkling water up to 12000 bph We offer a complete bottling line for natural and carbonated mineral water, specifically designed to meet the complex needs of technicians and industry experts. This solution not only handles bottle formats from 0.5 to 2 liters but also produces up to 12,000 bottles per hour, ensuring high reliability and excellent performance.. SIPA Blow Molder and Preform Management The SIPA SFR 12 blow molder, manufactured in 2000, initiates the production process. It efficiently manages preforms using a dumper and elevator-orienter. Furthermore, the integrated cooling chiller and four sets of molds allow the machine to produce bottles of various sizes with both precision and flexibility. As a result, it ensures smooth operations throughout the initial production phase. PROCOMAC Monoblock: The Core of the System The PROCOMAC mon ...

Used Bottling Line SIDEL for still water up to 12000 bph Main features of the bottling line The used SIDEL bottling line for still water up to 12000 bottles per hour delivers high standards of productivity and precision. Moreover, the system produces 12000 bottles per hour, making it suitable for medium high production capacities. The line processes PET containers, handling formats ranging from 0.33 L to 1.5 L. Additionally, this line applies a volumetric filling system, ensuring accurate dosing for each bottle. It supports containers with neck types between 25 and 29 mm, thereby improving compatibility with various market standards. Furthermore, the system exclusively processes still water, maintaining a specific and dedicated production flow. Details of the equipment in the Used Bottling Line SIDEL for still water up to 12000 bph The Sidel SBO 8 blow molding machine, manufactured in 20 ...

Used Bottling Line for Sparkling Beverages up to 9000 bph The used bottling line for sparkling beverages up to 9000 bph effectively manages the production of still and sparkling water, as well as soft drinks, in PET containers. This line features interconnected machines, which, together, ensure a continuous and effective workflow. Additionally, each machine in the line operates in isobaric mode, optimizing filling for sparkling beverages. As a result, the system handles up to 9000 bottles per hour, making it a powerful solution for high-output bottling. Containers and Product Type in the Bottling Line For sparkling beverages The system, specifically designed to fill PET containers, provides durability and lightness, making them ideal for both sparkling and still beverages. Furthermore, this line specializes in processing still and sparkling water, along with other non-alcoholic drinks. U ...

Used Complete Line for PET and Glass 2007 Rinsing Machine: Manufacturer: Dipran Model: Marea 12P Year: 2007 The used complete line for PET and glass bottles includes a high-quality rinsing machine. Manufactured by Dipran in 2007, the model is Marea 12P. This machine ensures thorough and efficient rinsing of the bottles, preparing them for the filling process. Filling Monoblock: Manufacturer: NELDEN Model: Giove FC VA 20-1 Big Year: 2010 The line also features a reliable filling monoblock manufactured by NELDEN. The model is Giove FC VA 20-1 Big, and it was produced in 2010. Using a gravity filling method, this monoblock precisely fills the bottles with the desired product, ensuring accuracy and consistency. Labeling Machine: Manufacturer: Newtec Model: Fix S2 E2 Year: 2007 Included in the line is a Newtec labeling machine, model Fix S2 E2, manufactured in 2007. With its mechanical cam, t ...

Gea Procomac Used Complete Bottling Line These are machines that are part of a bottling line having the following characteristics. • Bottling line speed: 7,000 / 8,000 bt/h of 75 cl sparkling wine and 10,000 / 11,000 bt/h of 75 cl still wine • Bottling line designed for the bottling of the following formats: 20cl – 37.5cl – 75cl – 150cl Below is the year of manufacture for each piece of equipment with the relative sale price: 1. Bortolin-Kemo depalletiser – year of commissioning: 1993 Filling 2. Gea Procomac filling monoblock – year of commissioning: 2000 Including: Gea Procomac rinser – 54 taps Ozosteril Gea Procomac for the production of ozonated water to be used in rinsers – year of commissioning: 1993 Gea Procomac isobaric filler – 56 taps Cork capper Arol – 8 heads (set of mouthpieces for mushroom cap and set of mouthpieces for  ...

Used Complete Bottling Line for PET and Glass 2007 Depalletizer This unit takes bulk of bottles that are stacked on a pallet and places them onto an accumulation area before entering the Lowerator unit. The operation of the machine is manual. There are some forklift interactions with loading full pallets onto the infeed conveyor, removing the empty pallets from the discharge conveyor and the placement of empty pallets at the operator level (layer dividers). Cleaning is carried out with the machine switched off and the hoist lowered. Bottle Lowerator The Lowerator transfer the bottles from the Depalletiser operator level to the lower level Rinser before entering the Filler. This unit is used for glass bottles only and can be mechanically adjusted easily depending on different bottle dimensions. Gripper Rinser Bottle Rinser provides an excellent way to fully clean the bottles. The bottle r ...

Used Complete Bottling Line Procomac 2000 1. Blow-mouldingmachine Typ SIPA SF12/8 (2002) 2. Chillerfor SIPA machine (2002) 3. Compressor Typ Kaeser (2002) includes: Air receiver 1000 liter, 16 bar, Mikrofilter/Carbonfilter, Screw-compressor CS121/12 bar Air receiver 1000 liter, 45 bar, Pre-filter HP-Compressor (Booster) N753-G HP- Airdryer THP 142 48 Microfilter, Carbonfilter 4. 40m Airconveyor Typ Procomac (2002) 5. Rinser-Filler-Capper24/24/6 Typ ProcomacMuvitec(2000) Capper also for sports-cap incl. 6. Labellingmachine Type Futura, hotglue (2000) 7. Bottleinspector Type Logis&Controls (2000) 8. Bottle transporter Krones (speed-controled) (2000) 9. Handle Applicator Twinpack (2000) 10. Packingmachine & Shrinktunnel Kettner (2001) 11. Packing-robot Profipac (2005) 12. Wrappingmachine Robotec (2002) Formats 1. O.5 liter bottle height 220mm Diameter 66mm Label 215 x 70mm 2. 1.5 liter bott ...

Used Aseptic Filling Line SIPA GEA for Milk up to 48,000 bph GEA ASEPTIC BLOW FILL SYSTEM ABF 2.0 Fully aseptic blowing, filling and capping system featuring H2O2-based preforms sterilization. Introduction to the Aseptic Filling Line SIPA GEA for Milk up to 48,000 bhp The used aseptic filling line SIPA GEA for milk up to 48,000 bottles per hour delivers a highly efficient and technologically advanced solution for the packaging industry. Specifically, this system ensures high-quality standards and food safety by using machines from 2018. Moreover, it processes milk in 235 ml bottles with plastic screw caps and a 38 mm neck. The line has only 900 operating hours. SIPA SFR 24 EVO Blow Molding Machine of SIPA and GEA aseptic line The SIPA SFR 24 EVO blow molding machine, manufactured by GEA in 2018, produces high-quality bottles from PET preforms. As a result, it maintains continuous and uni ...

Used filling line for edible oil up to 1800 bph Introduction The filling line for edible oil up to 1800 bph represents an advanced technological solution in the bottling sector. This system, branded Almanah Alman, guarantees efficiency and reliability essential for modern production needs. Capacity and Dimensions Equipped with a production capacity of 1800 bottles per hour for 1 liter PET containers, this line stands out for its high productivity. The overall length of the line is 6.3 meters, an important detail for planning the installation space in its warehouse. Filler Specifications in the Filling Line Used for Edible Oil The heart of Filling Line is the 18-valve filler, which operates through a pressure filling system. This method ensures rapid and efficient distribution of the product in the filling line for edible oil. Which ensures the maintaining, integrity and quality of the ed ...

Used Complete Tinplate Can Production Line for Oil (4–20 L) – Overview This second-hand, industrial packaging line is a complete tinplate can production system engineered for 4–20 L oil containers. Configured for body making, end making, compound lining, curing, double seaming, and handle welding, it offers a proven route to scale up edible oil container manufacturing. The line features reputable OEMs such as Soudronic, BIBRA, YAGUCHI, Cevolani, W.R. GRACE, and RKHD, making it a robust choice for companies seeking a used bottling line complement or an integrated container-making solution for food and beverage packaging operations. Year of manufacture: 1976 (body making section built in 1981) Technical Specifications & Performance Data Container Range & Materials Format range: 4 L to 20 L tinplate steel cans for edible oil and related viscous products Body styles: compatib ...

Used Wine Bottling Line For Glass Bottles of 3L – 2000 BPH Technical features: 150 mm chain Production: 2000 carboys per hour Voltage: 380 Low voltage: 24v Frequency: 50Hz Working direction: right to the left Worktop height: 1240mm Carboy base format diameter: 51, 179 × 340 This line includes big italian brands, like Bardi, Bertolaso and Cavagnino&Gatti. The bottling line ends with labelling equipment, so different packing systems can be attached as needed. This can be standard cardboard boxes or tray plus film or wrap-around system closure. The two bottle sizes worked are 1,5L and 3 L but if needed this can be adapted for 0,75 L too. With additional payment it can be upgraded to create equipment for the inlet and outlet, the 0,75 L bottle size. It has a satin cork corker and aluminium screw cap capper, and an 8 head labeller with two adhesive stations. It performs gravity filli ...

Technical Specifications & Performance Data This complete mixed new–used PET bottling line is engineered for high-speed carbonated soft drink production, delivering reliable performance at industrial scale while maintaining precise isobaric filling for carbonation retention and product integrity. Nominal speed: up to 25,000 bottles/hour (format- and product-dependent) Container type: PET (line configuration optimized for PET) Bottle formats: 0.06 L, 0.25 L, 0.50 L Neck finish: PCO 1881; compatible with lightweight CSD closures Filling technology: isobaric counter-pressure for carbonated beverages Product range: carbonated soft drinks; adaptable for flavored water and energy drinks Primary equipment brands: Sipa (SFR 16 blow molder), Sacmi (isobaric filler-capper), UBL SRL (labeling), Dimac (shrink wrapping), Robopac (palletizing/stretch), SIAD (process gases and compressors), plus c ...

Technical Specifications & Performance Data This used bottling line is a complete GAI-based solution for small to mid-scale beverage production, engineered specifically for beer. Built in 2016 and maintained in ready-for-operation condition, it delivers consistent quality and reliable throughput for breweries seeking a second hand, high-value system. Manufacturer: GAI (filling monoblock), Enos (labeling) Production speed: up to 900 bottles/hour Filling technology: Isobaric counter-pressure; Fill type: 5 Container types: Glass bottles Bottle formats: 0.33 L, 0.50 L, 0.70 L Product types: Beer (optimized for carbonated beer) Line components: GAI filling monoblock (rinsing–filling–capping configuration), Enos labeling system Condition: READY FOR OPERATION Documentation: Manuals available Safety: Safety features included (guarding and interlocks typical for modern lines) Advanced ...

Used Bottling Line for champagne, sparkling and still wine 4000 bph Product Compatibility and Filling Technology This bottling line processes still wine, sparkling wine, and champagne with high efficiency. Specifically, it handles only glass bottles and uses an isobaric filling system, which ensures precise control when filling pressurized liquids, such as sparkling products. As a result, wineries that produce multiple wine types with different physical and chemical properties can rely on this line for consistent, adaptable operation. In other words, the system addresses diverse product demands without compromising output quality. Performance Output by Bottle Format Depending on the bottle format, the line delivers different outputs. It processes both 0.20l and 0,375l bottles at 4,500 bottles per hour. Meanwhile, it handles 0,75l bottles at 4,000 bottles per hour and 1.5l bottles at 2,00 ...

Used complete pharmaceutical filling glass line - 3500 BPHTechnical Specifications & Performance DataThis used bottling line is a complete, second hand pharmaceutical packaging solution designed for the filling and packaging of glass bottles for infusion-type applications. The line is currently in production and supports multiple dosage formats with integrated washing, filling, capping, crimping, sterilization, inspection, labeling, cartoning, and palletizing. Engineered for sterile handling, it uses purified water (PW), water for injection (WFI), and sterile compressed air in critical stages.Production speed: 3500 bottles per hourBottle volumes supported: 0.2L, 0.25L, 0.4L, 0.5LContainer type: Glass bottles (infusion/IV-style)Line configuration: Depalletizer, Bottle Washer (PW/WFI + sterile air drying), Filler, Vacuum stage, Bottle Capper, Aluminum Crimping Machine, Tray Loader, Autocla ...

Used Aseptic Filling Line Tetra Pak A3 FLEX 1000S up to 9000 l h The Used aseptic filling line Tetra Pak A3 FLEX 1000S up to 9000 l h provides an advanced solution for aseptic bottling of liquid products. Specifically, it can reach a production capacity of 9000 liters per hour. This line ensures maximum efficiency and reliability when filling dairy products and juices. Moreover, its fully integrated aseptic process preserves the organoleptic and microbiological characteristics of the product. Main Components of the Aseptic A3 Flex 1000S line Homogenizer and Sterilizer – 12 tons per hourThe homogenization and sterilization system of the Used aseptic filling line Tetra pak A3 FLEX 1000S up to 9000 l/h stabilizes the product and eliminates microorganisms through controlled thermal treatment. Furthermore, its 12 tons per hour capacity allows it to handle large volumes while maintaining ...

Used PET Bottling Line for Still Water Up to 30000 bph Introduction to the Bottling Line The Used PET bottling Line for still water, has been specifically designed for still water with a maximum capacity of 30,000 bottles per hour (bph). Although currently assembled, the Used PET bottling Line for still water has ceased production at the end of this month but retains its integrity and potential for future reactivation. Configuration and Components of the Used PET bottling Line for still water Several machines work in synergy to form an optimal process at the heart of the Used PET bottling Line for still water. Firstly, the Blow Molding Machine from Sidel, model SBO 20 5270, commissioned in 2001, is crucial for forming PET bottles ranging in formats from 0.33 L to 1.5 L. It is important to note that the molds are not included in the line. Compressor and Quality Control of the Used PET Bot ...

Used Isobaric Filling Line for Sparkling Wine 3000 bph The isobaric filling line for sparkling and semi-sparkling wine produces 3000 bottles per hour and handles 1.5-liter bottles along with a wide range of formats. The line operates smoothly, and you can inspect it before its decommissioning at the end of April. Every machine in the line includes safety features, and some technical manuals remain available. The bottle formats include Collio, Atmosfera, Astro, Lia, Cuvee, Spumante Italia, Flute, Campana, Extral, Tappo Raso, Emiliana, Bordolese, Borgognotta, Bordolese Nobile, and Borgognotta Alta. Moreover, the seller will supply format change parts along with the line. Additionally, conveyors ensure seamless and continuous movement between machines, optimizing the production process. Description of Main Machines Depalletizer TMG VEGA 60 (2008) In this Used filling line for sparkling wine ...

Technical Specifications & Performance Data The Used Complete PET Line for Flat Drinks Tea is designed to enhance your beverage production efficiency with a remarkable speed of 22,000 bottles per hour. Manufactured in 2001, this second-hand line offers reliable performance with compatibility for various bottle formats ranging from 0.06 L, 0.10 L, to 0.50 L. This line supports PET container types, making it an ideal choice for flat drinks and tea production. Speed: 22,000 bottles/hour Container Types: PET Bottle Formats: 0.06 L, 0.10 L, 0.50 L Year of Manufacture: 2001 Advanced Automation & Control Systems This industrial packaging solution features state-of-the-art automation provided by leading manufacturers such as Krones and others. The integrated control systems facilitate seamless operations with minimal manual intervention, ensuring precision in filling, labeling, and capping proce ...

Used Bottling Line for still wine 2000 bph The Used Bottling Line for still wine 2000 bph processes still wine in glass bottles and handles formats of 0.375 L, 0.75 L, and 1.5 L. The line delivers a performance of 2000 bottles per hour and operates entirely in a clockwise direction. Each machine is designed to ensure precision, compatibility, and reliability when handling still wine in glass containers. Moreover, the configuration supports a continuous and linear bottling process with minimal manual intervention. Microfiltration and feeding unit The process begins with a mono screw pump equipped with a microfiltration system, manufactured in 1999. This pump directly feeds the filler and maintains consistent product flow. Specifically, the filtration unit includes three housings, each containing three filter cartridges, in addition to all required connectors. As a result, this module guar ...

Used complete isobaric bottling line for CSD 6400 bph Technical Overview of the Line This Used complete isobaric bottling line for CSD 6400 bph produces carbonated soft drinks with a nominal output of 6400 bottles per hour. Specifically, the line handles 0.50-liter PET containers using an isobaric filling system. In particular, this technology maintains constant internal pressure during the filling process. As a result, it prevents carbon dioxide loss and ensures that the final product preserves its quality and carbonation from tank to cap. Container Compatibility and Specifications The line supports PET bottles with 18-10 and 18-81 PCO necks, which represent standard formats across the beverage industry. Consequently, operators can integrate the system into existing lines without modifying downstream capping equipment. In addition, this compatibility facilitates bottle sourcing and pack ...

Used filling line CFT for cans up to 10800 cph The used CFT filling line for cans up to 10,800 cph represents indeed a reliable and efficient solution for industrial bottling operations. Equipped with specialized and high-quality equipment, this line is meticulously designed to maximize productivity and ensure in fact optimal results. CFT Empty Can Twist Rinser- Water Rinse of the CFT Canning Line The CFT empty can twist rinser with water rinse provides thorough cleaning of empty cans. Moreover, with its dual can rinser system and spare parts sets for 0.35L and 0.47L aluminum cans, it ensures flexible operation tailored to specific production needs. Additionally, the rinse process guarantees pristine can surfaces, vital for maintaining product integrity. CFT 20 Valve Can Filler – Seamer of the Used filling line CFT for cans up to 10800 cph The 2013 model RS20 CFT 20-valve can fille ...

Used bottling line GAI for still wine up to 1000 bph Bottling line structure of the Used GAI filling line for still wine The line operates as a fully automated system that bottles still wines at a rate of up to 1000 bottles per hour. Consequently, the system ensures a seamless process by including a GAI filling and corking monoblock, an MEB ADL10 S2 labeling and capsuling machine, and an integrated conveyor system that guarantees continuous operation. Furthermore, each component is designed for efficiency and reliability. GAI filling and corking monoblock This bottling line for still wine features a GAI monoblock that fills and corks bottles within a single unit. Specifically, the filling system uses eight filling valves that operate under vacuum to optimize efficiency and, as a result, reduce product oxidation. Moreover, the corking system includes a single head corker designed for stra ...

Used complete bottling line for CSD in PET and glass - 8000 bphTechnical Specifications & Performance DataThis complete used bottling line is engineered for beverage production with PET and glass bottles. Optimized for water and carbonated soft drinks, it combines reliable filling, labeling, and end-of-line packaging with robust utilities and process equipment. The line integrates components from reputable manufacturers to deliver consistent quality and uptime in industrial packaging environments.Production speed: up to 8,000 bottles per hourCompatible bottle formats: 0.33L, 0.5L, 0.75L, 1.0L, 1.5L, 2.0LContainers: PET and Glass bottlesMain filler/capper/rinser: Sinkrofill 40/50/10/10, 50 filling heads, 3–5 capping headsBlow molder: Easy Blow 4L (4,200 bph nominal)Labelers: Gernep Rollfed 8-480-1RA (foil/OPP) and Gernep Soluta 10-640 3SK (paper), up to 10,000 bphPack & handle applic ...

Used ALFA LAVAL S16 Olive Oil Line - year 2010Technical Specifications & Performance DataThis complete olive oil extraction line assembles proven components to deliver continuous, efficient processing of olive paste into high-quality oil. Designed around Alfa Laval core technology and complementary equipment, it offers industrial-scale throughput with reliable separation and thermal conditioning.Capacity: 2.5–3 t/h (tonnes per hour) of olivesManufacturing year: 2010Main manufacturer: Alfa LavalDecanter: Alfa Laval S16Separators: Alfa Laval 507 (2 units, with support frame)Crusher: Alfa Laval, 25 HPWasher: Santoro washer with destonerMalaxers: 4 units, stainless steel, 500 L each, independent dischargePaste pump: Bellin, stator size 16Elevator belt: Alfa LavalPomace screw conveyors: Officine MottolaThermal unit (boiler): D’Alessandro Termomeccanica CS 130, nominal output 130 kWH ...

Used KRONES water bottling line - 32.000 BPHTechnical Specifications & Performance DataThis complete used bottling line is engineered for high-efficiency PET bottle handling and beverage production. Manufactured by Krones in 2006, it delivers reliable performance for industrial packaging operations at scale. The line integrates blow molding, filling, labeling, coding, shrink wrapping, handle application, palletizing, and pallet labeling, creating a robust end-to-end production solution suitable for second hand markets seeking dependable uptime and consistent output quality.Production speed: up to 32,000 bottles per hourBottle formats: Compatible with 0.5L and 1.5L bottle formatsContainers: Designed for PET bottle handlingManufacturer (core equipment): KronesYear of manufacture (core line): 2006Operating hours recorded: 68702Control platform: Siemens PLCsFilling control: Electronically co ...

Used Thermoforming Packing water cup line - 11500 BPHTechnical Specifications & Performance DataThis used bottling line is a complete cup filling and packaging solution engineered for beverage production in water applications. The centerpiece is the TR-ALP 10 cup form-fill-seal machine, designed to thermoform, fill, seal, and cut PET cups with high efficiency. With a 5x2 format (10 cavities per cycle) and a working capacity of 17–20 cycles/min, the system achieves up to 12,000 cups/hour, ideal for second hand industrial packaging lines seeking reliable output. The integrated end-of-line equipment includes a robot cartoner, a case erector, a case sealer, and conveyors for smooth downstream handling.Production speed: up to 12,000 cups/hour (10,200–12,000 cups/hour typical)Cycle rate: 17–20 cycles/minCavity configuration: 5x2 (10 cavities per cycle)Punch size: 71 x 71 mmSuppo ...

Used KRONES glass bottling line - 18000 BPHTechnical Specifications & Performance DataThis complete glass bottling line for spirits is a high-performance, used bottling line engineered around premium OEM equipment. With a nominal speed of 18,000 bottles per hour, it delivers reliable throughput for mid-to-high volume beverage production and industrial packaging. The line handles standard spirits formats with precision and is fully integrated from depalletizing to labeling and end-of-line packaging.Production speed: 18,000 bottles per hourBottle formats: Compatible with 0.7L, 0.75L, 1.0L bottle formatsContainer types: Designed for Glass bottle handlingKey OEMs: Krones (core line), Zalkin (capping), plus Hartness, MSK, Garvens, Videojet, Langenpac, Marsh, Mapex, GassnerPrimary modules and models: Krones Sensometic filler, Krones Variojet rinser, Zalkin T9/360 cappers (x3), Krones Prontomod ...

Used tetra Pack A3 speed 200 ml Prisma line for UHTTechnical Specifications & Performance DataThis used bottling line is a complete Tetra Pak A3/Speed V040 filling solution configured for 200 ml Prisma cartons. It is a second hand, industrial packaging line designed for high-quality beverage production with integrated downstream packing and date coding. The package also includes a comprehensive UHT processing block to support aseptic filling operations.Main filler: Tetra Pak A3/Speed V040 (carton filling technology)Primary format: 200 ml Prisma cartonsSpeed: 24.000 BPH ( 200 ml Prisma).Accumulator: Tetra HELIX ACHX30-0700-100MLine control: Tetra Pak Line Controller 30 PLUSStraw application: Tetra Pak Straw ApplicatorConveyors: Complete Tetra Pak conveyor systemPacking – wrap around: GAMPACK WB90HSPacking – case/carton: GAMPACK case packerDate coding: Domino date printerWorking  ...