block press used for sale

Key data: 175 t, 4050 mm, 3600 mm

Capacity: 4050 mm x 175 Ton. Distance between frames: 3600 mm. Stroke: 265 mm. Control: DURMA DT15 (3D Touch Screen). Dimensions: 5200 x 1900 mm. Height: 2930 mm. Weight: 12,750 Kg.

Press brake manufactured in 2008. This Warcom DINAMICA 3000x100 features a bending force of 100 tons and a bending length of 3000 mm. It is equipped with an 8-axis backgauge system and a CNC Delem DA65 control for precision operations. If you are looking to get high-quality bending capabilities, consider the Warcom DINAMICA 3000x100 machine we have for sale. Contact us for further details regarding this machine.

CONTROLS   PLC SCHNEIDER PRESS DESIGN   drive system: eccentric / crank   number of slide actions: 11   feedstock transport direction: left to right PRESS FORCES   total force (nominal): 66 to SLIDE   slide force: 6 to   stroke: 114 mm SLIDE (MECHAN. PRESS)   variable speed: yes   stroke rate (min.): 40 /min   stroke rate (max.): 130 /min   main drive power: 7.5 kW STRIP-FEEDER   feeder type: roll feeder TRANSFER SYSTEM   distance between tools, stroke X fixed: 82 mm DIMENSIONS / WEIGHTS   space requirements -left/right-: 2875 mm   space requirements -front/back-: 1500 mm   total height: 2900 mm   total weight approx.: 7500 kg ATTACHMENTS (PRESSES)   safety guard / safety door: yes   2-hand engagement: yes   noise protection cabin: yes   acc. to actual accident protection regulation: yes Specifications: Number of stations: 12 (11+1) Capacity  ...

Press force: 250kN, Operating pressure: 280bar, Stroke: 300mm, Installation height: 500mm, Reach: 250mm, Oil filling: 280l, Ram speed: 105mm/s, Weight: approx. 2550kg. Documentation available. An on-site inspection is possible.

An old eccentric press Elmerding with defective foot switch is available. Press capacity 30°: 25t, stroke adjustment range: 12mm-80mm, ram adjustment: 60mm, stroke rate: 120rpm, table adjustment: 150mm, safety distance: 144mm, weight: approx. 1450kg. Only 2-hand operation is possible. Documentation available. An on-site inspection is possible.

Press force: 250kN, ram stroke: 8mm-80mm, stroke rate: 180/min, installation height: 310mm, table dimensions X/Y: 550mm/400mm, ram dimensions X/Y: 355mm/220mm, machine dimensions X/Y/Z: approx. 1100mm/1400mm/2300mm, weight: approx. 2500kg. An on-site inspection is possible.

A single-column eccentric press Edelhoff including transfer unit is available. Press force: 130t, stroke adjustment: 30mm-130mm, ram adjustment: 75mm, stroke rate: 45/min, table dimensions X/Y: 1000mm/700mm, weight: approx. 5000kg. An on-site inspection is possible.

7 assen: Y1 / Y2 / X / X2 / Z1 / Z2 / R Amadabombeertafel met Digipro-optie: CNC-buighoekmeetsysteem Sick laserbeveiliging aan de voorkant Plooimessen in een gereedschapskast: • 00300 – 60° - R6.0 2x 835 • 04706 – 88° - R0.6 4x 835 • 05206 – 88° - R0.6 10, 15, 20, 40, 50, 100R, 100L, 200, 300 • Z24511 – 45° - 0,37° 4x 835 • Z24512 – 45° - 0,37° 415 • Z24513 – 45° - 0,37° 10, 15, 20, 40, 50, 100L, 200, 300 • 45308 – 88° - R0.8 10, 15, 20, 40, 50, 100R, 100L, 125, 138, 200, 270, 300, 310, 370, 835 Buigmatrijzen in een gereedschapskast: • 07900 – 88° - V20 4x 835 • 07980 – 88° - V20 10, 15, 20, 40, 50, 100, 200, 400 • 07700 – 88° - V16 4x 835 • 07780 – 88° - V16 10, 15, 20, 40, 50, 200, 400 • T12451 5x 835 • 129001 5x 835 Capacity: 130 ton x 4100 mm Backgauge: CNC Control: AMNC-PC Touch Passage between uprights: 3760 mm Max ...

Press force: 650kN, Stroke: 150mm, Pressure piston diameter: 190mm, Column spacing X/Y: 950mm/460mm, Installation height: 500mm, Table dimensions X/Y: 900mm/870mm, max. stroke: 150mm, Operating pressure: 200bar, Machine dimensions X/Y/Z: approx. 1500mm/1750mm/2400mm, Weight: approx. 3000kg. Documentation available. An on site inspection is possible.

Table dimensions: 1000,400 mm pneumatic clamping: 4 St. moveable: ja For fast compression of Minizinken- or Softline compounds especially for larger cross-sections - Independent of the angle - Especially suitable for arched manufacturing - Table size 1000 x 400 mm - Pneumatic connection 10 bar - Air consumption 1 cdm / stroke - 4 clamping cylinders for workpiece clamping - Pairs switchable - Right half of the table supported on hardened shafts through ball linear bearings - 2 pressure cylinder for linear table displacement, separately switchable - Weight: 200 kg - CE - execution (Technical details according to manufacturer - without guarantee.!) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Haco PPES 110 ton x 4100 mm CNC Capacity: 110 ton x 4100 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 3600 mm Max stroke: 130 mm Max distance between table -- ram: 325 mm Depth of throat: 250 mm Table width: 180 mm Locking speed: 100 mm/sec Working speed: 11 mm/sec Returning speed: 100 mm/sec Electric motor (power): 11,4 kW Length: 4210 mm Depth: 1500 mm Height: 2530 mm Weight: 11 ton

12 CNC-assen: Y1 / Y2 / Y3 / Y4 / V / X1 / X2 / X3 / X4 / R1 / R2 / R3 / R4 / X5 / X6 / Tandem kantbank: 2 x 2000 ton GWF Als je een werkstuk van 16 meter lang buigt, is de maximale keeldiepte 1250 mm. Buigvoorbeeld: 35 mm (normaal staal) over een lengte van 16 meter Capacity: 4000 ton x 16 200 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 4600 mm (2x) Max stroke: 1000 mm Max distance between table -- ram: 1650 mm Depth of throat: 1250 mm Table width: 650 mm Locking speed: 70 mm/sec Working speed: 4 > 7,5 mm/sec Returning speed: 75 mm/sec Electric motor (power): 75 kW (2x) Power needed: 380V Length: 7100 mm Depth: 5000 mm Height: 6350 mm (above floor) Weight: 500 ton (2x 250 ton) Capacity: 4000 ton Bending length: 16200 mm

A fully automatic hot stamping press Oropress for gold and silver hot stamping is available. Press force: 5t, sliding table dimensions X/Y: 250mm/250mm, die dimensions X/Y: 120mm/200mm, max. operating temperature: 250°C. A rotary switch of the machine is missing and the adjustment is carried out using a screwdriver. One tension roller was repaired with a new flange bearing. Including foil feed unit. An on site inspection is possible.

For sale is a hydraulic single-column press (C-frame) with a press force of 100 t. The machine has a table size of 700 × 750 mm, a maximum installation height of 550 mm and a stroke of 400 mm, making it suitable for a wide range of pressing, assembly and forming work in industry and production. Technical data + information: Hydraulic Single Post Press – C-Frame – 100 T Allgemeine Disclosures - Type: Single column press / C-frame - Press force: 100 T - Table size: 700 x 750 mm - Max. distance plunger – table: 550 mm - Working height: 1000 mm - Overall dimensions (WxDxH): 1200 x 1150 x 2550 mm - Total weight: approx. 5,800 kg - Frame: welded steel frame - T-slots / holes: DIN 650 / 22 mm Hydraulikzylinder - Stroke: 400 mm - Piston rod Ø: 80 mm - Cylinder Ø: 140 mm - Max. working pressure: 270 bar - Replaceable crimping head: Ø 100 mm Hydraulikaggregat ...

Hydraulic press brake 120x3100

Dimensions (L/W/H): 2920x980x1450 mm Weight: 1500 kg Total power requirement: 11,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

PRESS DESIGN   drive system: eccentric / crank PRESS FORCES   total force (nominal): 55 to PRESS TABLE   table surface (left-right): 750 mm   table surface (front-back): 450 mm SLIDE   table surface (left-right): 400 mm   table surface (front-back): 300 mm   spigot hole diameter: 45 mm   stroke: 50 mm   stroke rate (max.): 100 /min SLIDE (MECHAN. PRESS)   slide adjustment: 70 mm   stroke min.: 6 mm   stroke max.: 50 mm   stroke rate (min.): 50 /min   stroke rate (max.): 100 /min TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 310 mm ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 1200 mm   space requirements -front/back-: 1500 mm   total height: 2500 mm   total weight approx.: 3850 kg ATTACHMENTS (PRESSES)   strip feeder: optional   fe ...

9 assen: Y1 / Y2 / X / R / Z / V / X1 / X2 / X3 3 CNC-gestuurde frontplaatsteunen Capacity: 2000 ton x 14 meter Backgauge: CNC Control: 2D Touch Passage between uprights: 12470 mm Max stroke: 900 mm Max distance between table -- ram: 1600 mm Depth of throat: 1255 mm Table width: 800 mm Locking speed: 77 mm/sec Working speed: 9 mm/sec Returning speed: 85 mm/sec Electric motor (power): 2x 90 kW Length: 16835 mm Depth: 5695 mm Height: 6750 mm (above floorlevel) Weight: 370 ton Capacity: 2000 ton Bending length: 14 000 mm

Record Gr.2 Semi-Automatic Roll Press Dough Dividing and Rounding Machine - Manufacturer: Record - Semi-automatic bun press - Size 2 - Weight range: 25- 85 grams - 30 pieces - 380 volts - Machine is completely NEW painted

Verstelbare buigmatrijs voor hoogwaardig staal Beschikbare maten: - V65 gt; V185 mm - V40 gt; V280 mm - V120 gt; V300 mm - V150 gt; V400 mm Aanpassing om de 10 mm De afstelling kan handmatig of halfautomatisch gebeuren. Neem contact met ons op voor meer informatie.

Erika Record Automatic 3-30 Roll Press Dough Dividing and Casting Machine - Manufacturer: Karl Schmidt GmbH - Model: Erika Record Automat - Type: 3-30 - 30 pieces - Incl. 3 plastic knitting plates - Machine is mobile on castors - Machine is technically and optically in very good condition Technical data: - Weight range : 30gram to 100gram -Dough insert: 900 grams to 3000 grams - Year of manufacture: refurbished 2016 - 400 volts

hydraulic press with hot platens by with thermal oil model COLOMBO REMO second hand machine for wood, veneer, composite materials, furniture, panels etc platen useful size mm.3000 x 1300 n.06 cylinders diam.mm. 80 max. thrust Ton. 120 intermediate worktop ( 3 worktops , 2 work compartments ) hydraulic pump motor power Hp 3 heating by with thermal oil weight kgs. 5500 volt. 380/50

PRESS DESIGN   drive system: eccentric / crank PRESS FORCES   total force (nominal): 40 to PRESS TABLE   table surface (left-right): 650 mm   table surface (front-back): 380 mm   thickness of bolster plate: 60 mm   opening in bed (diameter): 120 mm SLIDE   table surface (left-right): 350 mm   table surface (front-back): 250 mm   spigot hole diameter: 40 mm   stroke: 78 mm   stroke rate (max.): 145 /min SLIDE (MECHAN. PRESS)   slide adjustment: 60 mm   stroke min.: 8 mm   stroke max.: 78 mm   main drive power: 3 kW TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 297 mm ELECTRICAL SPECIFICATIONS   total power consumption: 3.05 kW   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 1300 mm   space requirements -front/back-: 1100 mm   total height: 2150 mm   total weig ...

hydraulic PRESS with hot platens by with thermal oil model COLOMBO REMO second hand machine DRILLED SOLID STEEL PLATEN for wood, veneer, composite materials, furniture, panels etc platen useful size mm.3450 x 1400 n.08 cylinders diam.mm. 80 max. thrust Ton. 150 intermediate worktop ( 3 worktops , 2 work compartments ) hydraulic pump motor power Hp 4 heating by with thermal oil weight kgs. 9.500 volt. 380/50

The Dorst TPA 70 is a used powder compaction press, known for its precise and reliable performance. It delivers a maximum pressing force of 700 kN with a withdrawal force of 400 kN, making it suitable for diverse compaction needs. The machine features a pressing travel of up to 30 mm, with a maximum filling height of 70 mm and operates at speeds between 14 to 40 strokes per minute. This ensures efficient throughput, ideal for high-demand production environments. With an upper punch stroke of 120 mm and adjustable travel of 200 mm, the Dorst TPA 70S offers flexibility in application. It requires a compressed air supply with an intake of approximately 200 liters per minute, and operates on a total connected load of about 20 kW. To enhance functionality, the machine is constructed robustly, maintaining a workplace-related sound level of 78 dB(A), and features a press housing capacity of 190 ...

DHS-200 – 200 T Hydraulic Heating Press – Sliding Table – Heating Plates 800 × 800 mm For sale is a hydraulic heating press DHS-200 with a pressing force of 200 T and an extendable sliding table system. The machine has heating plates ranging in size from 800 × 800 mm, an open height of 800 mm and a hydraulic stroke of 600 mm, and is particularly suitable for laminating, forming and thermal pressing processes with temperature-controlled tools. Technical data + information: Hydraulic Heating Press DHS-200 – 200 T General information - Type: Hydraulic heating press with sliding table - Pressing force: 200 t - Usable area table: 800 × 800 mm - Heating plates: 800 × 800 × 95 mm - Open width: 900 mm - Open height: 800 mm - Extendable table: 800 mm - Table height: 900 mm - Overall dimensions (WxDxH): 2,150 × 2,050 × 2,850 mm - Total weight: approx. 9,800 kg ...

Agfa Elantrix ST 125 SX Pressure Plate Stacker; cleaned and tested; Panel width 300-1250mm; Panel length 275-1470mm; Panel speed 400-2500mm/min.; Printing plate trolley. Plate stacker Agfa Elantrix ST 125 SX; cleaned and checked; plate width 300-1250mm; plate lenght 275-1470mm; plate speed 400-2500mm/min.; plate trolley.

Pressing force: 63t, working dimensions X/Y: 620mm/500mm, motor power: 22kW. An on-site inspection is possible.

CNC Press Brake Manufacturer: Blemas Type: 100-33 Year of Make: 1994 CNC control: Cybelec DNC 74 PSG Pressing force: 100 tons Working width: 3 m Weight approx. : 8 to. Approx. dimensions: 3,600 x 1,600 x 2,600 mm

3 assen: Y1 / Y2 / X Handmatige bombeertafel De achterkant van de machine is gesloten. Capacity: 175 ton x 3600 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 3150 mm Max stroke: 200 mm Max distance between table -- ram: 450 mm Depth of throat: 300 mm Locking speed: 80 mm/sec Working speed: 9 mm/sec Returning speed: 95 mm/sec Electric motor (power): 15 kW Length: 3880 mm Depth: 1750 mm Height: 2750 mm Weight: 13,4 ton

Qty. 1 Second hand aluminium extrusion press line Mfc.: Taiyuan Force: 5000 MT Type: Front loading – single action Built: 2007 Stopped in 2016 Product weight: max. 55 kg/m Billet dia.: 279 & 406 mm (11” & 16”) Length: 600 - 1200 mm Consist of: Cold billet saw Gas heated billet furnace Extrusion press Run-out table Platen saw Quenching device Single puller Stretcher Finishing saw Dies heater

LASCO FP 222 S hydraulic press was built in Germany by Lasco Umformtechnik GmbH. The machine has been continuously maintained and upgraded throughout its service life. In 2022, a major upgrade was carried out, which included replacing the electrical cabinet, installing light curtains and adding a SIEMENS SIMATIC HMI TOUCH touchscreen operator panel. The LASCO FP 222 S is an extremely versatile hydraulic press designed for the production of extremely precise, repeatable and yet complex components used in the broadly defined automotive or machinery industry. Its main application is hot and cold forging. The use of a die cushio in the lower work table and the large slider stroke means that the machine can also be used as a deep drawing press. All machining processes are performed with a high press force of up to 200 tonnes, which, combined with the highly dynamic slider, guarantees the b ...

Manufacturer: Huber Model: Strainpress SP 290 Type of Machine : Screw press separator Condition: Used, fully functional Included Spare Parts and Accessories - Control cabinet (included) - Digital documentation (included) - Used screw shaft screening zone, conical 288/204 SW1735, including sleeve - New screw shaft press zone 198 SW1678 - New screen basket Strainpress 290 200/2 L810 RV 2-3.42 press zone - 4 x new spherical roller bearings 22313EAE4 (d65 D140 W48) - 2 x new piston rings 100/120x12 - Small parts kit: shaft seals, spacer rings, grease cartridges, shaft keyways, bolts, brass nuts, bearing puller tool Find more here - .ucymachines/ Contact us at - sales@ucymachines

Key data: 5 t, 350 mm, 310 mm

Small Electric Table Press Brake with Spindle Drive TableOne 5 - CoastOne Made in Finland Press force: 5T Bending Length: 350mm Spindles: 1x5T Control: TC15-2D Graphics Back gauge: 1 axis controlled X axis - R axis manual Bending tool holder: Type A / R1 / ES Style / AMADA Promecam 1x set of bending tools incl. 36 months warranty after installation Delivery excl.; Available now! Viewing under power possible at any time by appointment!

Fortuna Automat A3 Dough Dividing and Forming MachineProduct descriptionManufacturer: Edmund SchröderType: Fortuna Automat A3Condition: used, functional, bakery condition30 divisionDough dividing and knitting machineOuter dimensions: W.: 65 cm, D.: approx. 74 cm, H.: 145 cmDetails see pictures

Bread press Werner&, Pfleiderer Rotamat E + 3 WirktellerProduct descriptionManufacturer: Werner&, PfleidererType: Rotamat 3Current type: 3 / N - 50 HzNominal voltage: 380 VNenn operating current: 2.5 AMax. Pre-fuse: 16 ACondition: used, in working order, bakery condition - please clean thoroughly before useWith three red plastic knitted platesThe working room height is adjustableFunctions: For cutting or actingDetails see pictures.

used bread press RotamatManufacturer : WPTyp : Rotamat GS380 Volt, weight range from 30 - to 80 grams30 graduation including 1 knitting plateThe Rotamat GS roll press from the manufacturer WP is a professional machine used in bakeries and other bakeries to form rolls and other pasta. The Rotamat GS enables precise and efficient shaping of the dough to produce uniform and attractive rolls. With this machine, bakeries can optimize production processes and ensure the consistency of their baked goods. The

Fortuna Roll Press Automatic A3 Dough Dividing Machine Product Description Manufacturer: Fortuna Machine Type: Automatic Machine A3 / Size 3 With two red plastic knitting plates The working chamber height is adjustable Functions: Only cut or cut as well as act Details see pictures.

Roll Press Erika Record Semi-Automatic Product Description Manufacturer: Erika Record Type: Semi-Automatic Condition: used, functional, baker's condition Roll press for all doughs for dividing dough and rounding 30-piece Details see pictures.

Used Fortuna Roll Press Automatic A3 Dough Divider Product Description Manufacturer: Fortuna Machine Type: Automatic Machine A3 / Size 3 With two red plastic warp knitting plates The working room height is adjustable Functions: Only cut or cut as well as act Details see pictures.

Roll press Record â Product description âœ" Manufacturer: Record âœ" Condition: used, bakery condition Details see pictures

Roll press Fortuna-Schröder semi-automatic machine size 3â Product descriptionâœ" Manufacturer: Edmund Schröderâœ" Type: Fortuna Semi-automatic machine size 3âœ" 30 divisionâœ" Dough part and knitting machineâœ" Power supply: 400 V, 50 Hz, 1.1 kW For details see pictures.

Bread press VEB Habämfa â Product description âœ" Manufacturer: VEB “Habämfa âœ" Condition: used, bakery condition, not checked For details see pictures.  

Bread press Werner&, Pfleiderer Rotamat E Bread press Werner&, Pfleiderer Rotamat E + 3 knitting plates â Product description âœ" Manufacturer: Werner&, Pfleiderer âœ" Type: Rotamat 3 âœ" Year of construction: 1991 âœ" Current type: 3 / N - 50 Hz âœ" Nominal voltage: 380 V âœ" Nominal operating current: 2.5 A âœ" Max. pre-fuse: 16 A âœ" Condition: used, functional, baker's condition - please clean thoroughly before use âœ" With three red plastic knitting plates âœ" The working room height is adjustable âœ" Functions: For cut or act details see pictures