block machine used for sale

X=3500mm Y=2000mm Z=1250mm W=800mm H=360° spindle 130 mm, ISO 50, max. 1600 rpm table 1600 x 1800 mm with a load of 12000 kg with Siemens electric and CNC Heidenhain TNC 415B Oil cooled: Schimpke. Dismantled. The machine has been used very little = in very good technical condition.

Ultrasonic tube filling and sealing machine with the following equipment: - Basic machine - Blank tube magazine incl. tube feeding chute for autm. Entering the blank tubes - automatic tube alignment according to the typeface or identification mark - Ultrasonic capping unit for closing PE and laminate tubes - Coding device on the tube fold, one-sided, incl. 4 set of coding numbers (0-9) - Cutting device on the tube fold - 1 format set for PE tube size D.35 mm - Format range 19mm - 50mm tube diameter - Cycle rate 15 - 30 tubes/min. Depending on product Please also note our current machine offers ( NEW + USED ) on Resale under : abc://abc.resale.de/angebotelinkd-user.php?myid=35837&dealer=1&order=1 & abc://abc.resale.de/angebotelinkd-user.php?myid=35846&dealer=1&order=1 & Visit us also on : cbv-pack

Multigraf MCM-48 creasing and perforating machine Specifications MCM-48: Manual of the material feed Minimum format, mm 80x100 Maximum format, mm 480x500 Material density, g/m2 80-500 Dimensions, mm: 1100 x 605 x 300 Power supply: 220 V

Ultrasonic tube filling and sealing machine with the following equipment: - Basic machine - automatic tube alignment according to the typeface or identification mark - Ultrasonic capping unit for closing PE and laminate tubes - Coding device on the tube fold, one-sided, incl. 4 set of coding numbers (0-9) - Cutting device on the tube fold - 1 format set for PE tube size D.35 mm - Format range 13mm - 50mm tube diameter - Cycle rate 10 - 15 tubes/min. Depending on product and operator Please also note our current machine offers ( NEW + USED ) on Resale under : abc://abc.resale.de/angebotelinkd-user.php?myid=35837&dealer=1&order=1 & abc://abc.resale.de/angebotelinkd-user.php?myid=35846&dealer=1&order=1 & Visit us also on : cbv-pack

REP H48Y10W Horizontal Injection Moulding Machine Year of construction 2005 Machine Parameters Volume [cm3] 1000 Clamping force [kN] 1930 Injection pressure [bar] 1500 Moulds dimension [mm] 450x450 Tonnage 1.9t Platen size: 450x450 Cycles: 2,220,383 General condition: operational Dims [mm]: 4200 L x 1400 W x 2200 H Weight [kg]: 6750

CNC portal flame cutting machine Manufacturer: MGM Type: Cortina DS3100 Retrofit 2022 CNC control: MS300 Track width: 3,100 mm 1 oxy-fuel burner gas type as desired Track length: 5 or 6 m without table

Blowing machine SIDEL SBO 20 Series II year of manufacturing: 2000 capacity: up to 28.000 bph neck size: PCO 28-1881 inclusive: Preform feeding system and chiller The machine is still installed and in production in Germany until approx. November / December 2022

3-spindle deep hole drill -without electrics- Year of construction 1998 / rebuilding 2014

Horizontal turning machine manufactured in 2007. This Mazak QuickTurn Nexus 200 CNC lathe features an 80 mm spindle bore and comes equipped with a bar feeder, collet chuck, and Matrix control. The machine has a weight of 4380 kg and includes tooling. If you are looking to get high-quality turning capabilities, consider the Mazak QuickTurn Nexus 200 machine we have for sale. Contact us for further details.

Surface grinding machine manufactured in 2006. This STAEHLI DLM 450 features a lapping wheel diameter of 450 mm and a maximum lapping wheel speed of 110 rpm. It has a robust machine weight of 2100 kg and dimensions of 1200 × 1650 × 2050 mm. If you are looking to get high-quality lapping capabilities, consider the STAEHLI DLM 450 machine we have for sale. Contact us for further details regarding this machine.

Roll bending machine manufactured in 2006. This FACCIN 4HEL 2134 features a maximum plate width of 2,100 mm and a maximum plate thickness of 28 mm. It is equipped with linear guides and has a top roll diameter of 350 mm. If you are looking to get high-quality rolling capabilities, consider the FACCIN 4HEL 2134 machine we have for sale. Contact us for further details.

Weibert WJ-CU-32 5-fold combi With format sliding table 2,60m Saw blade 250-315mm swivel: 90°-45° Planing width of 320mm 3 knife shaft reversible knives (no more adjustment) Passage height of 4-225mm Milling machine: 90°-45° swivel backwards Milling machine rpm: 3000/4000/5000/ 6000/8000 and 10000 rpm Height stroke 160mm Engine power: 3 motors 4KW 400V WY-500200 ILLUSTRATIONS WITH SPECIAL EQUIPMENT, IF APPLICABLE

Deburring machine manufactured in 2008. This Costa LEVIGATRICE MSH3 CCVC 1350 features a working width of 1,350 mm and accommodates workpiece thicknesses ranging from 0.5 to 250 mm. It is equipped with inverter-driven motors, a vacuum system, and belt cleaning blowers. If you are looking to get high-quality deburring capabilities, consider the Costa LEVIGATRICE MSH3 CCVC 1350 machine we have for sale. Contact us for further details.

CNC punching machine manufactured in 2013. This Pivatic Punching Line PCC80-e TT HT is designed for serial production of flat sheet metal parts, featuring a punching force of 400 kN and a maximum coil weight of 5,000 kg. The line includes two punching sections for flexible and repetitive operations. If you are looking to get high-quality punching capabilities, consider the Pivatic Punching Line PCC80-e TT HT machine we have for sale. Contact us for further details.

This 4-axis ONA KE500 wire EDM machine was manufactured in 2004. It features a maximum workpiece weight capacity of 5000 kg and a Z-axis travel of 400 mm. The machine offers impressive X-Y travel dimensions of 700 x 500 mm and U-V travel of 460 x 460 mm. If you are looking to get high-quality wire EDM capabilities, consider the ONA KE500 machine we have for sale. Contact us for further details.

Weibert CU-41 Combine With format sliding table 2,60m Saw blade 250-315mm swivel: 90°-45° Planing width of 410mm 4 knife shaft reversible knives (no more adjustment) Dressing table length of 1800mm Passage height of 4-225mm Milling machine: 90°-45° swivel backwards Milling machine rpm: 3000/4000/5000/ 6000/8000 and 10000 rpm Height stroke 160mm Motor power: 3 motors 4 KW 400 V WY-500300 ILLUSTRATIONS WITH SPECIAL EQUIPMENT, IF APPLICABLE

Size: 560 x 900 mm Equipments: Flat pile feeder 6 bags Cross-fracture aggregate Integrated cutterblocks Electrics & Meters Maximum format: 560 x 900 mm Minimum format: 100 x 150 mm

GKM Siebtechnik KTS-V 600/1 – Vibratory tumbler screening machine (YOC 02/2021) Professional vibratory tumbler screening machine from GKM Siebtechnik (Waibstadt). Type: KTS-V 600/1 Serial Number: 3794 Year of construction: February 2021 Technical features: • Size 600 (sieve diameter approx. 670 mm) • 1-deck design • High-frequency, three-dimensional screening movement • High acceleration (suitable for dry and wet screening) • Modular, self-centering design • Parts in contact with the product in stainless steel • Maintenance-free vibration motor • CE and EAC compliant • Manufacturer: GKM Siebtechnik GmbH, Felix-Wankel-Str. 11, 74915 Waibstadt The machine is used, but fully functional and ready for use. Ideal for classification, fractionation and dedusting of dry and moist bulk materials in the food, pharmaceutical, chemical, plastics, minerals  ...

Bang & Co SAP 603 strapping machine – built in 2016 – fully functional + 2 rolls of tape Sell a used, fully functional Bang & Co strapping machine model SAP 603. Nameplate): • Model: SAP 603 • Machine No.: 15015642 106 • Year of construction: 2016 • Power connection: 230 V / 50 Hz • Manufacturer: Bang & Co GmbH, Oberursel • CE marking available Condition & Scope of Delivery: • Fully functional and ready to use • Good used condition • Also included: 2 rolls of strapping Ideal for commercial use for secure strapping of cartons, parcels and packages. Sale: • Delivery possible • Pick-up available If you are interested, please contact us - more photos/videos or a demonstration on site are possible.

Weibert W7-41 Station wagon Planing width : 410mm Motor power: 3 motors 400V 2.2 KW Dressing table length: 1500mm Planing shaft: 3-reversible knife shaft Passage of 4-230mm Format sliding table 1500mm Cutting height: 103mm Saw blade 315mm swivel 90°-45° Milling machine: rigid 90° Milling machine rpm:1400/3500/6000 and 8000 rpm WY-500400 Illustration similar!

Mobile sealing machine. Band width: 250 mm.

Manufacturer MORI SEIKI Model NL3000/3000 Year 2.008 CNC MORI SEIKI MSX-850III Capabilities and advances Max. turning on bed 995 mm. Max. turning on transverse carriage 825 mm. Maximum turnable diameter 420 mm Maximum turnable length 3,123 mm. Distance between points 3,200 mm. X-axis travels 280 Z-axis travel 3,170 mm. Fast Forward X-Axis, Z 30.0000 mm/min Head Nose head JIS A2-8 Maximum head speed 3,000 rpm Rod pitch head 105 mm. Axle diameter in the front bearing 160 mm. Main motor power 28 kW Maximum torque 3,365 Nm Turret No. Turret 12 Positions Maximum square tool size 25 mm Bored bar diameter 50 mm. Turret indexing time 0.3 s Counterpoint Tailstock travel 3,164 mm Tailstock shank diameter 150 mm Tailstock shaft course 150 mm MT5 tailstock cone Equipment 3 Claws Hydraulic Plate Ø 400 mm INCLUDED Chainring type SCHUNK THW 400-120 Quick C ...

220627 Code Description Universal Cylindrical Grinder Make Jones - Shipman Model 1310 ( 8" x 18" ) Serial No. Year ? Grinding length, max. 450 mm Grinding diameter, max. 203 mm Center height 103 mm Weight workpiece kg Table tilting angle - 15 ° till + 15° Diam. Grinding wheel 350 mm Width Grinding wheel, max. 40 mm Motor power grindingwheel 1.5 kW Speeds Grindingwheel 1750 / 2300 rpm Speeds workpieceholder ( 6x ) 30 – 415 rpm Total power 3.5 kVA 380 Volts Machine size L x W x H 1.7 x 1.2 x 1.75 meters Weight 1800 kg Accessories internal grinding ( 10500-16500-24500 rpm ) coolant some tooling Condition Machine is in good condition

Edge banding machine Type: KDF 220 Manufacturer: Brandt Year: 2012 Machine in good condition, fully functional, under power, current after major service. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Hagesana Cream Blower  Type: Cream King SF20 Year of construction 2001 Stainless steel boiler digital control with compressed air Emergency Off Switch Height: 130cm Width: 80cm Depth: 56cm

Glimek Dough Weigher Year of construction 2004 approx. 300-1200gram 1 chamber with large funnel with flourer Height: 180cm Width: 150cm Depth: 70cm

Working width: 2500mm, an on-site inspection is possible, not under power.

This 5-axis DMG MORI MORI NLX 2500/700 SY was manufactured in 2023. It features a turning length of 700 mm and a powerful main spindle with a maximum speed of 4,000 rpm. The machine is equipped with a 12-station turret and integrated automation for efficient parts handling. If you are looking to get high-quality turning capabilities, consider the DMG MORI MORI NLX 2500/700 SY horizontal turning machine we have for sale. Contact us for further details.

This TRUMPF TruPunch 3000 CNC punching machine was manufactured in 2013. It features a working area of 2500 mm x 1250 mm and a maximum punching force of 180 kN. The machine is equipped with 18 tool stations and offers a maximum punching rate of 1000 strokes/min. If you are looking to get high-quality punching capabilities, consider the TRUMPF TruPunch 3000 machine we have for sale. Contact us for further details.

Clipping machine Technopack KDCVT 200 Type: KDCVT 200 Dimensions: 100x60x190cm Maximum closing diameter: 120mm Delivery time: 30 working days after advanced payment

Single head Floor model with foot pedal heavy design adjustable side stops Several paper drills Drill holder 380 volts / 0.55 kW / 1.7 A

Electrical injection moulding machine manufactured in 2005. This Husky Hylelectric H1000 RS95/80 features a clamping force of 10,000 kN and a maximum injection pressure of 2280 bar. It has a total platen size of 2070 x 1840 mm and a screw diameter of 80 mm. If you are looking to get high-quality injection moulding capabilities, consider the Husky Hylelectric H1000 RS95/80 machine we have for sale. Contact us for further details.

Electrical injection moulding machine manufactured in 2005. This Husky Hylelectric H1000 RS95/80 features a clamping force of 10,000 kN and a total platen size of 2070 x 1840 mm. It has a maximum injection pressure of 2280 bar and a screw diameter of 80 mm. If you are looking to get high-quality injection moulding capabilities, consider the Husky Hylelectric H1000 RS95/80 machine we have for sale. Contact us for further details.

Lathe Haas

checked & cleaned double head standing model - foot pedal operated heavy duty construction adjustable side rulers several paper drills drilling chuck drill diameter 3 - 20 mm hole distance min 55mm / max 430mm required tools 380 Volt / 0,55 kW / 1,7 A

Double head Standing model with hand lever adjustable side stops Several paper drills fixed hole spacing standard 80 mm

Manufacturer: Stratasys Model: F370

Horizontal turning machine manufactured in 1999. This Mazak Quick Turn 10 features a machine weight of 2,750 kg and a standard length of 1,800 mm. It is equipped with advanced control features such as Polar Coordinates Input and Cylindrical Interpolation. If you are looking to get high-quality turning capabilities, consider the Mazak Quick Turn 10 machine we have for sale. Contact us for further details.

Slicer Bizerba VS 8, Connection 230V, weight approx. 44kg, good used condition, works perfectly several in stock

Ayen Knothole Drilling Machine ED 08-4, Machine No.:270 316, 0,6kW, 380volt, 1420 rpm,

Grinding range: approx. 130 x 255 mm Grinding speed: 2800 rpm Table size: 150 x 300 mm Drive motor: 380 V, 1.5 kW Space requirement: 750 x 700 x 1700 mm Weight: approx. 380 kg Pot disc Ø: 180 mm

This 7-axis Citizen Cincom L20 VII was manufactured in 2000. It features a maximum machining diameter of 20 mm and a maximum machining length of 200 mm per chucking. The machine is equipped with a Mitsubishi Meldas CNC control and includes a bar feeder, enhancing its productivity. If you are looking to get high-quality turning capabilities, consider the Citizen Cincom L20 VII Swiss-type turning machine we have for sale. Contact us for further details.

The NEW CNC grinding VERECO RG 700/8500 is designed for the batch production of bench pins and connecting rod pins of crankshafts in a fully automatic cycle, or, for the production of individual parts in manual. It operates by means of a mobile grinding wheel unit both on the X axis and on the Z axis: this allows the grinding of different diameters in a single positioning of the piece. MAIN TECHNICAL FEATURES: Distance between tips: 8500 mm Drill height: 800 mm Maximum rotating Ø: 1600 mm Maximum weight of the balance piece: 10,000 kg Maximum grinding wheel dimensions (with recesses): 1600x900x160 mm Approximate machine weight: 98.000 kg NB: The aforementioned technical data, collected from the technical data sheet of the manufacturer, are to be considered non-binding and subject to change without notice. NUMERICAL CONTROL The Siemens 840 D electronic numerical contro ...

We can offer you 4x Barmag FK6-1000V texturing machines, manufacture year 2014, 288 spindles, pneumatic yarn pusher, PU discs,airjet, unitens. Very good condition, price $215000/set FOB China.

Filter tape rakes

MHME twin lane decorer / florette machine - used for broccoli In good working condition

This 5-axis JOBS Jomach 241 gantry milling machine was manufactured in 1999. It features an impressive X-axis travel of 3,400 mm, Y-axis travel of 2,500 mm, and Z-axis travel of 1,250 mm. The worktable size is 3,000 x 1,500 mm with a load capacity of 12,000 kg. If you are looking to get high-quality milling capabilities, consider the JOBS Jomach 241 machine we have for sale. Contact us for further details regarding this machine.

Plasma cutting machine manufactured in 2007. This MicroStep SPLR-P features a Kjellberg HiFocus 160i PLUS plasma power source, offering a cutting current range of 10A to 160A. It includes an integrated CNC operator terminal for precise control and a filtration system by Donaldson Torit DCE. If you are looking to get high-quality plasma cutting capabilities, consider the MicroStep SPLR-P machine we have for sale. Contact us for further details.