billet shear used for sale

Specifications: - Max. working width 3040 mm - max. material thickness 4 mm - Manual cutting angle adjustment - Stroke rate up to 34 1/min - Backgauge with positioning control Pos100 - Table height approx. 850 mm - Front angle stop - 2 front support arms - Rear space protection with light barrier - E-foot switch - Pneumatic connection 6 bar - Drive 400 V - Space requirement without support arms approx. W 4000 x H 1400 x D 2100 mm - Weight approx. 4700 kg

Description: Hydraulic guillotine shear with - ELGO control for backgauge - Cutting angle adjustment - Cutting length adjustment - Cutting length limitation (time dependent) - Sheet thickness adjustment - Back gauge with clearance function - Cutting line lighting - Side stop - 3 pcs. support consoles - good condition Sheet width 3050 mm Sheet thickness 16 mm Stand width 3050 mm Stop depth 15-1000 mm Cutting angle adjustment yes ° Cutting gap adjustment yes mm Connected power 30 kW Machine weight approx. 14.5 t Space requirement approx. 4.0 x 4.0 x 2.55 m weight approx.: 14,500 kg, Approx. Onsite Dimension. (l x w x h): 4,000 x 4,000 x 2,550 mm

Description: Profile steel scissors with - 1 foot trigger - Support tables - Rectangular notcher - Hole punch including tools Round steel 30 mm Square steel 25 mm Angle steel 80 x 80 x 8 mm Cutting performance flat steel 200 x 13 / 350 x 6 mm Punching force 40 t Projection 175 mm Working stroke 32 mm Working height 980 mm Hole diameter in sheet thickness 20 x 15 / 38 x 8 mm Total power requirement 3.0 kW Machine weight approx. 0.62 t Dimensions LxWxH 1.0 x 0.8 x 1.3 m weight approx.: 620 kg, Approx. Onsite Dimension. (l x w x h): 1,000 x 800 x 1,300 mm

Description: Guillotine shears - manual operation Sheet width 1320 mm Sheet thickness 1.5 mm Distance between columns 1340 mm Back gauge - adjustable 900 mm Connected load manual operation Machine weight approx. 0.25 t Dimensions L x W x H 1.6 x 0.8 x 1.1 m weight approx.: 250 kg, Approx. Onsite Dimension. (l x w x h): 1,600 x 800 x 1,100 mm

Description: cable shears Length 1050mm Weight 7,0 kg Dimensions 950x100x50mm Approx. Onsite Dimension. (l x w x h): 1,050 x 100 x 50 mm, weight approx.: 7 kg

Description: cable shears Length 800mm Weight 5.5 kg Dimensions 850x100x50mm Approx. Onsite Dimension. (l x w x h): 850 x 100 x 50 mm, weight approx.: 10 kg

Description: Sheet width 2500 mm Sheet thickness 3.0 mm Stand width 2620 mm Back gauge - adjustable 850 mm Machine weight approx. 2.8 t Dimensions L x W x H 3.2 x 1.8 x 1.7 m Approx. Onsite Dimension. (l x w x h): 3,200 x 1,800 x 1,700 mm, weight approx.: 2,800 kg

Description: cable shears Length 900mm Weight 6,0 kg Dimensions 950x100x50mm Approx. Onsite Dimension. (l x w x h): 950 x 100 x 50 mm, weight approx.: 6,5 kg

Machine parameters: Max. cutting length: 3150 mm Max. sheet thickness: 6 mm Machine weight: 6800 kg The machine is in perfect condition after GO, the following was done: grinding of blunt knives, resealing of working cylinders and their flanges, resealing of holders and sections, replacement of polyurethanes, replenishment of nitrogen, electrical repair. (Current invoice proving the scope of work of course)

Description: Sheet width 4100 mm Sheet thickness 6 mm Stand width mm DARLEY control Cutting angle 1°20' ° Oil volume 150 litres Description: Cutting length adjustment, foot switch, 3 support arms (left one with scale), motorised backgauge, finger guard, 21 hold-down devices, sheet chute, manual cutting gap adjustment, sheet holding device plate thickness: 6 mm, cutting angle adjustment: 1 °, total power requirement: 18,5 kW, weight approx.: 11,000 kg, Approx. Onsite Dimension. (l x w x h): 4,600 x 2,300 x 2,000 mm

Description: Workbench with manual shear 2 drawers and lower shelf. Internal reference: ,CBT-077X weight approx.: 100 kg, Approx. Onsite Dimension. (l x w x h): 1,000 x 620 x 890 mm

CAPASITY 60 T

Description: Capacity sheet metal 5 mm, round steel 13 mm, with trolley Approx. Onsite Dimension. (l x w x h): 880 x 600 x 2,400 mm, weight approx.: 100 kg

Key data: 4050 mm, 6 mm, 1000 mm

Min./Max. Cutting Angle = 0.5 - 2° Cutting gap control = 0.05 - 0.8 mm Stroke rate = 10 - 45 Adjustable back gauge = 750 - 1000 mm Sheet metal high bracket Oil tank = 150 L Motor power = 7.5 kW, 400 V Machine weight = approx. 10,000 kg

Working length: 3040 mm Max. thickness of sheet metal to be cut: - 400 MPa steel: 1,0 mm - Al 250 MPa: 1,5 mm The shears are characterized by a solid, rigid construction and high reliability. The cutting edges of the shears are made of high quality tool steel and are hardened. The main part of the shears is the welded stand, in which the guide surface for the ram is machined. The vertical movement of the ram is derived from the eccentric shaft by means of a connecting rod and pin. The shearing force is exerted by a hand lever pressed onto the end of the eccentric shaft. The shears require almost no maintenance, only occasional lubrication of the sliding points with a lubricating press and sharpening of the blades after they have become dull. The knives on the shears can be sharpened repeatedly. L x W x H: 3465 x 770 x 1160 mm Weight: 830 kg By prior arrangement, possibility of in ...

Description: Shear Serial number 131 Cutting capacity: 2000 mm Maximum cutting thickness: 10 mm weight approx.: 8,000 kg, Approx. Onsite Dimension. (l x w x h): 2,400 x 2,200 x 1,700 mm

Specifications: - Max. cutting width 3050 mm - Max. cutting capacity at 45 Kp/mm² 6 mm - Cutting angle adjustment 1 - 2.20 ° - Cutting gap - adjustment via lateral adjustment lever - Number of hold-downs 16 pcs - Stroke rate up to 22 /min - Front angle stop 1100 mm - 2 front support arms 600 mm -Mot. Backgauge with ELGO positioning control - 5 - 1000 mm - Cut line illumination - E – Footswitch - Drive 400 V / 12 kW - Space requirement approx. W 4100 x H 1500 x D 2200 mm - Weight approx. 5.0 t

Description: Shear with feeder Shear: - Serial number 1644 - Maximum cutting length 1090 mm - Maximum cutting thickness of sheet metal 3.5 mm / sheet metal 40/45 kg/mm2 LASA feeder: - Model RDC 18F-1500 CM - Serial number 28-1179-A - Maximum coil width 450 mm - Maximum thickness 3 mm - Feeding speed 0-30 m/min weight approx.: 3,500 kg, Approx. Onsite Dimension. (l x w x h): 2,200 x 3,400 x 1,500 mm

plate width: 2,050 mm, weight approx.: 1,000 kg, Approx. Onsite Dimension. (l x w x h): 2,300 x 750 x 1,600 mm

Description: PUNCHING Punching force: 60 ton Punching capacity: Ø22 x 20 mm (Diameter x Thickness): Ø40 x 11 mm Throat depth: 200 mm Maximum stroke length: 40 mm Cycles / Min. (15 mm stroke): 34 mm Working height up to mould: 1050 mm  , ANGULAR CUTTING Cutting force: 60 ton With 90° cut: 100 x 100 x 8 mm Working height: 1070 mm  , FLAT SHEAR Flat bar shear: 350 x 15 mm Blade length: 360 mm Working height: 805 mm  , BAR SHEAR Shear for round bars: ø40 mm Shear for square bars: 38 x 38 mm Cutting channels: 102 mm optional tool I-beam cutting: 102 mm optional tool NOTCHING Rectangular notching (W x D x T): 50.8 x 90 x 8 mm V-cut (L x W x T): 90 x 90 x 8 mm optional tool Working height: 1050 mm  , SPECIAL TOOLS optional  , Single Vee press brake (W x T): 160 x 8 mm tool optional Multi Vee press brake (W x T): 250 x 6 mm tool optional ...

Offer 24176 Specifications: - max. working width 3050 mm - max. cutting capacity St 40 6.5 mm - Cutting angle hydr. adjustable 0.3 - 3 ° - Cutting gap adjustment by hand - Number of hydraulic hold-downs 18 pcs - Motor - Back gauge 20 - 1000 mm - Front angle stop + support arms - Stroke rate depending on cutting angle and cutting length 7 - 17 rpm - Hydraulic drive 400 V / 11 kW - Table height approx. 800 mm - Space required including back gauge, without front support arms ca. W 4000 x H 1700 x D 2250 mm - Weight approx. 4800 kg - with: - E-foot switch - Cutting line illumination - - Cutting length preselection via potentiometer

Description: working length: 2500 mm max. thickness of cutting material: 10 ,mm S235, S355 manual limiter adjustment machine is mechanical with a flywheel hydraulic sheet metal presses plate thickness: 10 mm, weight approx.: 9,000 kg, Approx. Onsite Dimension. (l x w x h): 3,800 x 2,050 x 2,050 mm

sheet width:3100 mm plate thickness:6 mm table length:3400 mm table width:490 mm table height:800 mm stroke:18 pro Min. quantity of oil:150 l Numbers of downholders:14 cutting angle:1,2 ° total power requirement:11 kW weight of the machine ca.:5,5 t mot.digital controlled backgauge, workspace:1000 mm :1000 mm front support arms with T-slot and flip cams:1000 mm

sheet width:3100 mm plate thickness:6 mm distance between columns:3100 mm no. of strokes:16 - 24 Hub/min cutting angle:0,5 - 1,5 ° down holder:14 Stk. throat:350 mm table height:900 mm oil volume:150 l total power requirement:11 kW weight of the machine ca.:7060 kg dimensions of the machine ca.:4100 x 2200 x 2190 mm 1 brandnew hydraulic shear ERMAK CNC HVR 3100-134 with following equipment: - CNC controlled hydraulic blade gap adjustment system - CNC controlled cutting angle adjustment system - portable foot pedal - CNC controlled motorized backgauge system - front support arms with t-slot, ruler and flip stop - squaring arm - scales with metric and inches - cutting line illumination and shadow line - emergency stops - swing up backgauge - central lubrication system - front finger protection - rear sliding plates - front sliding plates with ball bearing on the table - 350 mm throat dept ...

I offer hydraulic shears not sheet metal marked NTA 3150/10A manufacturer Strojáreň Piesok. The maximum cutting length is therefore 3150 mm and the strength of the structural steel sheet is 10 mm. Plugged in, fully functional, but so rarely used that its not worth my while to keep them. (they do not fit into our primary production segment) Price negotiable, buyer arranges transport, total weight 14,000 kg Possibility of viewing, testing - at the Chrudim facility

Max. Coil weight: 25t, max. Coil outer diameter: 2500mm, Coil inner diameter: 506-610mm, Finished sheet width: 50-159mm, Strip thickness: 0.6-3mm, with double cone decoiler, threading assembly, straightener (straightener was taken over from an earlier line, Schnutz factory, year of manufacture late 80s - early 90s), loop bridge, strip feed unit, cut-to-length shear, conveyor belt, brush table with gripper, slitting shear (guillotine shear), conveyor belts, stacking unit and gantry gripper with two stacking stations, on-site inspection is possible.

A tower shearing plant is available, plant contains (1) Trough goods storage, for material stock approx. 100-150m, max. fabric width: 5000mm (2) Steamer Fleissner, stainless steel, max. fabric width: 5000mm. (3) Main Drive Roller Menschner, cast roller Monforts, year of construction: 1987 (4) Tower Shearing Machine Menschner NTS-T-III, year of construction: 1988, fabric width: 300x5500mm, with three shearing cylinders (5) Control panel for auxiliary drives, deflection, transition bridge, roller fabric storage ETF, year of construction: 1988, storage capacity: approx. 80 running meters, with two center controls Erhardt+Leimer.

Key data: 2040 mm, 3 mm

Max. cutting length: 2040 mm Max. sheet thickness: 3 mm steel Manual backgauge can be operated from the front up to 500 mm Side stop and table extensions Pneumatic sheet hold-up Knife sharpened

Offer 24246 Specifications: - Max. working width 2550 mm - Max. material thickness steel 400 N/mm² 4.0 mm - Max. material thickness stainless steel 700 N/mm² 2.5 mm - Cutting angle 1.8 ° -Mot. Controlled positioning of the back gauge up to 750 mm - Front angle stop - 2 pieces support arms - electr. Footswitch - Rear space protection with light barrier - Drive 400 V / 7.5 kW - Space requirement approx. W 3300 x H 1300 x D 2300 mm - Weight approx. 3500 kg

Moros Alligator Shear Model HF-30 Cutting force 200ton For cutting tyres and bar

Used fully automatic copper / nickel cathodes (max. 1200x1200x25 mm) longitudinal and transverse cutting line, incl. vacuum feeding unit, plate feeding device, scissors 1 for shearing strips, pulling device, transport and lifting device, shear 2 for shearing on squares, apron conveyor for part ejection. Scissors each with hold-down device

General SKU300U587 LocationBarneveld MakeDiosna TypeP25 Main Features MaterialStainless steel Volume25 Ltr. Motor5.5 KW Specified Features - Universal mixer MaterialStainless steel 1.4301 (304) Universal mixerHigh-Shear Mixer-Granulator Capacity25 Ltr. Vessel sizesdia. 380x220 mm With covercheck Inlet30 mm Manual operated outletcheck Outletdia. 125 mm With motor1,1/1,5 kW, 380 volt Rotor speed175/350 rpm With lump breakercheck With motor2,4/3,3 kW Rotor speed1500/3000 rpm With timercheck Information Mach.No.241-049 Mounted on wheelscheck With switchcheck Floorspace1,59x0,67 m Total height1,45 m Weight550 kgUniversal mixersDiosnaMixers > Universal mixersBrand > Diosna What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the mac ...

General SKU270T600 LocationBarneveld MakeKady International No.L894 Main Features MaterialStainless steel Rotor70 mm Specified Features - Stirrer Continuous reactorcheck Rotor sizesdia. 70x26 mm Inletdia. 9 mm (2x) Outletdia. 6 mm With jacketcheck Rotor speed± 18 000 rpm Stirrers MaterialStainless steel Information Floorspace0,65x0,5 m Total height0,75 m Weight400 kgStirrersKadyMixers > StirrersBrand > Kady What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU275T623 LocationBarneveld MakeK-Tron Coperion TypeK2-MV-T35 No.1400518/M-356290 Main Features MaterialStainless steel Motor0.55 KW Inlet diameter804 mm Specified Features - Metering screw MaterialStainless steel 1.4404, Stainless steel 1.4435 (316L) Metering screws Screw diameter35 mm Pitch12,5 mm Screw length240 mm With hoppercheck Capacity77 Ltr. Hopper sizesdia. 804x339,93 mm Inletdia. 804 mm Outletdia. 220 mm With motor0,55 kW 400 Volt Screw speedmax. 82 rpm With breaking/mixing shaftcheck Motor0,55 kW 400 Volt Information Year of construction2014 With switchgear(as is) Floorspace1,2x1,2 m CEcheck Total height2,6 m Weight500 kg Extra Specificationswith: twin screw feeder: coperion k-tron K-ML-KT20, 2014, (CE), with hopper: 7 Ltr., inlet: dia. 114,3 mm, outlet: 60,3 mm: with :weight scale: coperion k-tron K-SFS-24: Typ24/12, 2014, (CE) tw ...

NNP High shear mixer Stainless high shear mixer, sits over a vessel with hopper to add product, shaft length 600mm, diameter of high shear head 120mm, 3Ph

DANIELI, 1989, 550 T/DAY, BILLETS SQUARE: 130 x 6000 MM, REBARS: D8 - D14

LENGTH OF BILLETS: 9.0 M, DIA.: 160 MM,

CLEANING BANK: BILLET SIZE: DIA. 160 MM x 9.15 M, ROTATION ANGLE: 90°, STACKING & PACKING DEVICE: BILLET SIZE: SQUARE: 50-160 MM; LENGTH: 2.5 - 9.0 M,

Metal press RMH MB (Mini Baler) This machine is particularly suitable for pressing aluminium, copper, zinc and other metals. The RMH MB Mini Baler is able to crush and then press larger material made of aluminium, copper, zinc and other metals thanks to lateral knives on three sides of the filling box. Technical data: Drive: 7.5 Kw / 400 V Weight: 1.8 T Shear lid pressure: 20 t Ground ram pressure: 40 t Working pressure: 220 BAR Filling box dimensions (L x W x D): 81.5 cm x 35 cm x 51 cm Package dimensions (L x W x material quantity): 35 cm x 20 cm x variable length (material quantity) Pressing cycle: about 1 minute Dimensions (L x W x H): 2.45 meters x 1.20 meters x 1.40 meters CE Norm Metal Baler RMH MB (mini baler) Cutting edges on three sides of the bale box and lid give this machine the ability to handle with oversized materials out of aluminium, copper,  ...

Compact bag machine Technical data: Nominal width: 420 mm Working width: 400 mm Flow speed: 7 m / min, depending on the film Bag length: 15 mm to 4000 mm Foil thickness: 2 x 10 in the 2 x 100 in the Slide material: LDPE, HDPE (others determine by tests) Film type: flat film (others determine by tests) Max film roll: Ø 400 mm Schweißschine Oberschine pulse heated against attempts on the bottom blade Welding seam width shrink seam Air consumption: no compressed air required Dimensions (WxHxD): approx. 800x480x600mm (without base plate) Supply voltage: 230 Volt, 50/60 Hz Protection: 16 A, slow-blow The advantages at a glance: Outstanding price / performance ratio quick and easy to use no compressed air required precise stepper touch screen to set up all parameters (feed, stroke, welding and cooling time, quantity) switched it can compact, small design of easier film roles c ...

Qty. 1 Second-hand extrusion press line Mfc.: SCHLOEMANN Built: 1980 Force: 4000 MT The press was used in the brass and copper application. The press has been reconstructed and changed to aluminium application in 2005. Before the production has been stopped was the press in excellent condition. The plant has been stopped in 2010 due to ecenomical situation. Billet dia.: 8’’(203mm) - 12’’(304mm) Billet length: 1000 mm Main ram: 1400 mm dia Side cylinder: 300 mm dia. (piston head) Exit sıze of and plate: 500 mm Scope of supply: Feeding system Billet furnace Extrusion press Run aut table 45 mt long Cooling table (belt type ) Strecher force: 200-300 ton Die oven Finsihing table and saw Billet furnace ( 2 pieces) one natural gas type one induction type JUNKER Hot saw Operation desk PLC type (need sone ...

Manufacturer: LUKAS / JAWES OF LIVE New device with warranty for cutting cables, car parts, usable in recycling Cutting device LSI 200 Mouth width: 125 mm Weight: 13.8 kg Lukas cable shears Hydraulic cable shear for the mobile use. New machine The type LS/ 200 can be used very good to handle with heavy cable. Because of its excellent shear forces it saves much time. Its low weight makes it possible to work economically. The unique Lukas Star Grip valves makes it easy to use. The cutter blades can be resharpened. This makes a long service life. Operating pressure: 50 MPa Shear forces: up to 270 kN Width of mouth: up to 125 mm Dimensions: l/w/h 680 x 190 x 163 mm Weight: 13.8 kg. Hydraulic power system Operating pressure: 50 MPa Oil tank: 9l Output: low pressure 4.4 l/min high pressure 1.4 l/min Power: 1.5kW with 3000 min-l /230 V Dimensions: l/w/h 372 x 312  ...

Ladies and gentlemen, we offer: Biomass Container Heating incl. storage container with hydr. Shear floor discharge Plant complete with saemt installations Heating capacity 450 kW reachable by conversions now 480 kW Hot water production Fuel: coarse, moist spaene, wood chips up to 40% HF Best measurement results: Dust content 0.04 g/m3 at exhaust temperature of 170 degrees C For more information and pictures we are available. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any w ...

AUTOMATIC EDGE BANDING machine SCM OLIMPIC K 1000 second hand machine volt. 380/50 for solid wood max. 10 mm. / PVC / veneers / melamine composed by : technical details : min. panel length mm. 120 min. panel width mm. 70 panel thickness min./max. mm.10/60 edge thickness min./max. mm.0,4/10 total installed power Hp 9 composition machine : 1. lower glue pot 2. motorized roller for automatic feeding 3. edge shear 4. end trimmer unit . motor Hp 0,3 . rpm 12.000 5. top and bottom ( rough ) edge trimmer unit . 2 motors Hp 1,1 . rpm 12.000 6. top and bottom ( fine ) bevel edge trimmer unit . 2 motors Hp 0,3 rpm 12.000 7. edge glue scraper unit integral protection enclosure

TURNING ANGLE: 180°, BILLET SIZE: QUADRATE: MAX. 240 MM, SQUARE: MAX. 210 x 250 MM, U & I FORM: MAX. 400 MM, WEIGHT: MAX. 5500 KG,

Machine according to DIN 8605: lathe with increased accuracy. Top width: 700 mm Tip height: 170 mm Swing over bed: Ã? 340 mm Swing over cross slide: Ã? 190 mm Bed width: 260 mm Longitudinal slide displacement: 600 mm Cross slide displacement: 220 mm Upper carriage displacement: 110 mm Plan carriage length: 410 mm Plan slide width: 150 mm Bed slide length: 380 mm Turning tool cross section: 20 x 20 mm Distance turning Center - upper carriage: 34 mm Range of the upper carriage (support): 60 / 120 ° Main spindle: Spindle connection DIN 55029 (camlock): S 5 spindle bore: Ã? 50 mm Internal cone according to DIN 7178: 1:22 spindle diameter in front bearing: Ã? 70 mm Maximum Chuck diameter: Ã? 200 mm Faceplate diameter: Ã? 200 mm Spindle speeds: 40-3000 rpm Speed: Stepless mechanical speeds: 4 Main drive: Power at 40% ED: 5,3 kW Maximum nominal torq ...

TYPE: DIRECT, BILLET DIA.: 90 MM, LENGTH: 400 MM

Qty. 1 Second-hand extrusion press line Mfc.: 3TC, Allen Bradley, Rexroth, Gautschi, Elhaus, Nederman, Hydrotec, Marx GmbH, Truninger, Ekatech Force: 3500 MT Built: in 1960’s Pressure: 315 bar Billet dia.: 343 mm x 900 mm (can be modified 14 x 1.0 m) Modernisation: 2011 Complete exchange of control system on press to Allen Bradley Control Logix including encoders for Ram, Container and Shear. Change of pump controls to Bosch Rexroth HS4. 2012 Complete change of hydraulic system (excluding pumps). New side cylinders and container cylinders. Safety rebuild of press and with change of PLC to Allen Bradley Control Guard Logix L72S (which is the current CPU). Change of control system of billet furnace. Complete new electrical system and integration of logic into the press PLC. Modernisation of gas burners in the furnace. 2013 Change of one of the main pumps to Bosch Rexrot ...

We offer a powered shears roller conveyor for sale. The length is variable: 3275 mm 8735mm max. Roll width 760 mm. Suitable for distribution centers and depots for the loading and unloading of trucks, containers and wagons. Stepless height adjustment. A very simple drive into various types of vehicles for its fast and safe loading and unloading. After use, can be easily folded away to save the space in the warehouse. Technical data: Length retracted: 3275 mm Length extended: 8735 mm Width: 760mm Adjustable height: from 730 to 1040mm Rows of rollers: 67 units Three-phase motor 120W Speed: from 5-35M / min. Control Panel x 1 piece Panel x 1 piece maximum load: 80kg / M Number available: 4 PCs. Net price: â?¬7750 / piece Delivery possible. Please specify your postal code and directly ask.

Qty. 1 Second-hand taper pole pipe production line We have following taper pole pipe production line for sale Mfc.: CMF, Delem, Merkel, Bosch, Nachi, YSD, ESAB, (France, Korean, Japan and Chinese Manufacturer) Built: 2006 Stopped: 2012 3. Product Capacity: Profile 5,000 ton/year / Round pipes 10,000 ton/year i. (Capacity : Profile 6.9 pcs/Hr, Round 3.6 pcs/Hr) Price: Please provide us with your offer! (Further information can be submitted on request!) Production Description Size for Product Pole or Pipe type Conical Pole PolygonalPole Round Pipe Thickness mm 2.6,3.7,5.2,7.5 10 2.6,3.7,5.2,7.5 10~20 20~38 O.D mm ?190 ~ ?463 ?190 ~ ?820 22”~ 32” Length M 2.45 ~ 16.0 2.45 ~ 16.0 6.2 ~ 12.8 Rake About 0.43° About 0.43° Intensity Mpa T.S=510, Y.P=360 T.S=510, Y.P=360 T.S=650, Y.P= 50 ...